Download - Interviw Que on Claion Latest
-
7/31/2019 Interviw Que on Claion Latest
1/22
HI All,
Please Enjoy the Life
DMX-4 Interview Questions
What is the difference between DMX-3 and DMX-4?
What is the difference between DMX-4 and DMX-950?
How many Cache directors, Front-end directors and Back-end directors we can use in DMX-4?
What are the different types of Front-end directors and the purpose of each one?
What is the FAN-IN and FAN-OUT ratio of DMX-4?
Explain Rule 17 in DMX?
What are the Management Tools for DMX?
What are the major components of System Bay and Storage Bay?
Explain Enginuity Operation layers
How do you calculate number of cylinders for 50GB LUN?
What is the maximum hyper size in DMX-4?
How many hypers can create in a Single disk?
How many members can contain in one meta?
How many LUN IDs available per port?
What Dynamic LUN addressing?
How do you add a new member to the existing Meta?
What is stripping and what is Concatenating?
What are the DMX-4 supported disk types, no. of disks and maximum capacity?
Briefly explain the DMX-4 supported Device types?
What are the RAID levels DMX-4 Supports?
-
7/31/2019 Interviw Que on Claion Latest
2/22
What are Vault drives and Hot Spare?
What is Preview, Prepare and Commit while using Symconfigure command?
How do you check the back-end Operations on Symmetrix Array?
How do you check the failed disks in the Symmetrix Array?
What are the service states of a device
How do you reserve the devices?
What is Tiering and how do you create the Disk Groups
How do you check the free space by Disk group and Array as whole?
How do you check the particular disk is connected to which DA Port and it is resides in
particular DAE?
What is drive looping?
How do you check the particular device is connected to which Host?
How do you check the total allocated storage of a Host?
Host is unable to see the storage, what may be the problem?
What is VCMDB and How do you take the backup?
VCM Database
The Symmetrix Volume Configuration Management (VCM) database stores access
configurations that are used to grant host access to logical devices in a Symmetrix storage array.
The VCM database resides on a special system resource logical device, referred to as theVCMDB device, on each Symmetrix storage array.
Information stored in the VCM database includes, but is not limited to:
Host and storage World Wide Names SID Lock and Volume Visibility settings
-
7/31/2019 Interviw Que on Claion Latest
3/22
Native logical device data, such as the front-end directors and storage ports to which theyare mapped
Masking operations performed on Symmetrix storage devices result in modifications to the VCM
database in the Symmetrix array. The VCM database can be backed up, restored, initialized and
activated. The Symmetrix SDM Agent must be running in order to perform VCM databaseoperations (except deleting backup files).
Regarding the VCMDB, now this DB resides on the the two SFS (Symmetrix File System)
volumes that are automatically created when binfile is build. You can identify them easily on
bin. A small volume called still called VCM must still be created but it will be used just as anormal gatekeeper
How do you list the Hosts which are connected to particular director port?
How do you check the number of storage bays connected to the system bay and number of
disks in each storage bay?
How do you check the devices which are mapped to FA but not masked to any host?
How do you check the login hosts in the Array?
What is pre check list to assign to storage to the host?
Explain step by step to provide storage to the Host?
What is Thin Provisioning?
How do you create thin pools and thin devices?
What are the steps for storage reclamation?
How many mirror positions RAID-1 and RAID-5 will occupy?
How do you increase the mirror positions?
How do you convert the One device type to another?
What is FA Port Flag and how do you set the FA port flags?
How do you setup the Symmetrix metrics?
-
7/31/2019 Interviw Que on Claion Latest
4/22
How do you check the configured environmental variables?
Can windows, Linux, Solaris share the same FA in DMX?
What are the External locks and how to check?
How to monitor performance of EMC Symmetrix?
How do you check performance statistics of a particular director port?
How do you check the cache activity of selected front-end directory?
How do you check the back-end I/O requests of selected disk?
What are the available performance information types in SYMSTAT command?
What is symmetrix optimizer and how it works?
What is Symmetrix QoS and how it works?
What is the purpose of Symmetrix Change Tracker?
What is Dynamic Cache Partitioning?
What are the logs available at host-end and on symmetrix array?
How do you monitor the real time events on symmetrix array with example?
How do you track the history of events on symmetrix array with example?
How do you check the audit logs on symmetrix array?
How do you activate the auditing on symmetrix array?
What is Symmetrix ACL?
Explain step by step to setup the access controls on symmetrix array?
How do you take the backup of ACLs?
What is Symmetrix User Authorization?
Explain step by step to setup user authorization on symmetrix array?
How do you perform backup and restore user authorization information?
-
7/31/2019 Interviw Que on Claion Latest
5/22
What is Read Hit and Write Miss?
What is the purpose of bin file in SAPAPI database?
What are the services of symcli?
Explain step by step procedure to setup new host?
What are the Symcli Base Management Commands?
How do you prepare the Storage Capacity planning reports by host wise?
What are the Symmetrix Business Continuity Tool
By using what symcli command we can check the HBA details and physical details
What are the business continuity tools for symmetrix array?
Common Interview Questions
Tell me about your self?
What are the day to day activities?
What are your roles and responsibilities?
What is the first thing you will do at office?
What is your storage environment?
What are the SAN, Storage and Replication management tools you are using?
How you will monitor the Storage environment?
How you will get the tickets?
Explain step by step procedure to close the received ticket?
When you initiate the change what are your responsibilities?
Explain step by step procedure to close the received ticket?
-
7/31/2019 Interviw Que on Claion Latest
6/22
SAN Interview Questions
What is zoning?
What is hard and soft zoning and Explain?
What is the difference between zone and zone set?
Explain step by step procedure for creating soft zoning?
Explain step by step procedure for creating hard zoning?
What is VSAN and how to create?
What is ISL?
What is F,E and FL Port?
What are the management tools for Switches?
How do you troubleshoot the SFP failure?
How do you upgrade the firmware?
What are the general switch problems?
TimeFinder Interview Questions
Define Business Continuity? What are the Business Continuity tools available for symmetrix? What is RPO and RTO? What are the different types of Device Groups? What is the difference between TimeFinder Mirror and Clone? What is the advantage of TimeFinder Snapshots? What are the commands used for TimeFinder Mirror, Clone and Snapshot? Explain step by step procedure for TimeFinder Mirror Operations? What is the status of Source and Target devices at the time of Establish, Split and
Restore?
How many Mirrors can create with single source concurrently? What is default option while performing establish?
-
7/31/2019 Interviw Que on Claion Latest
7/22
What is Power path Split? What is ECA (Enginuity Consistent Assist) split? What are the precautions we have to take while restoring a mirror? What is Protected BCV Establish? What is reverse split?
What is Protected BCV Restore? How many BCVs can be supported in multi BCV functionality? How many BCVs can be Established concurrently to the standard volume/ Is TimeFinder Mirror Supports concurrent restores? Is the Mirror can be mounted to the source host? One device can be a member of how many device groups? Device Groups are host based or Array based? What is fore ground and back ground instant split? Explain Step by step procedure for TimeFinder Clone Operations? What are the available options with Clone Creation and Explain? What is the status of source and target devices while create, activate, restore and
terminate? Can we use STDs as a target for Clone? How many CopyOnAccess session clone will support? How many concurrent Full copied session clone will support? Clone session can use BCVs as a source volume? What will happen if we establish a clone session? Explain Step by step procedure for TimeFinder Snap Operations? How many snapshots can be created from a single source volume? How many save devices can contain in a save pool? What is the recommended size of VDEV? How do you create the SAVE and VDEVs? How do you monitor the free space in Save pool? How do restore the snapshots? How the data will be stored in save devices in a save pool?
Clariion Interview Questions
Explain Clariion architecture Hardware Models of Clariion What are the differences between Clariion CX-3 series and CX-4 Series What are the Hardware components of Clariion What are the management tools for Clariion How to Initialize Clariion Array What is Access Logix and How do you enable it? Why Access Logix has to be enabled What are Vault drives and how much capacity they use? What is CMI? Clariion Message Interface What are the I/O Operations in Clariion Use of SPs What is Storage array in Clariion?
-
7/31/2019 Interviw Que on Claion Latest
8/22
Create Storage group How to manually restore failed paths in Clariion How do you gather SP Collects? How do you upgrade the NaviSphere Manager? What are steps to assign a LUN to existing Host?
Explain step by step procedure for storage provision to the new host? How do create capacity planning reports in Clariion? What is HEAT report? How do you enter into the Engineering Mode and what are the activities we can perform
in Engineering Mode?
How do you create a meta LUN? Explain step by step procedure for LUN migration? What is Private LUN Pool? What is Reserved LUN Pool? How do you deregister the hosts from NaviSphere? How do you create a user and assign access rights?
How do you monitor Clariion alerts? What is the recommended ration of Read and Write cache?
DMX-4 Storage Provisioning Step by Step
Step by Step Procedure for storage provisioning & Reclamation in DMX-4
Storage Provisioning
Creating STD device Forming Meta Device Mapping Masking
Storage Reclamation
Unmasking Write Disable Un-mapping Dissolve meta Deleting hypers
http://storage-help.blogspot.com/2010/09/dmx-4-storage-provisioning-step-by-step.htmlhttp://storage-help.blogspot.com/2010/09/dmx-4-storage-provisioning-step-by-step.htmlhttp://storage-help.blogspot.com/2010/09/dmx-4-storage-provisioning-step-by-step.html -
7/31/2019 Interviw Que on Claion Latest
9/22
Step by Step Procedure for storage provision in DMX-4
Creating STD device
Verify the Symmetrix status
symconfiguresid 4282 verify
If any hung activities found abort
symconfiguresid 4282 abort
Verify the available free space
symconfigure -sid SymmID [-v | -freespace [-units cylinders | MB]] list
or
symdisksid 4282 listdisk_group 2
Create Command file
Create dev count=8, size=12394, data_member_count=3, emulation=FBA, config=RAID-5,
disk_group=2;
Verify the command line syntax by performing PREVIEW using Symconfigure command
Symconfiguresid 4282f Create_hypers.txtvnoprompt preview
Verify the Array readiness by performing PREPARE using Symconfigure command
Symconfiguresid 4282f Create_hypers.txtvnoprompt prepare
-
7/31/2019 Interviw Que on Claion Latest
10/22
Execute COMMIT using Symconfigure command
Symconfiguresid 4282f Create_hypers.txtvnoprompt commit
Verify the newly created devices
Symdevsid 4282 listnoport
Forming Meta Deviceo
Verify the Symmetrix status
symconfiguresid 4282 verify
o If any hung activities found abortsymconfiguresid 4282 abort
o Create Command fileForm meta from dev 26CA, config=striped, stripe_size=1920;
add dev 26CB:26E4 to meta 26ca;
o Verify the command line syntax by performing PREVIEW using Symconfigureommand
Symconfiguresid 4282f meta.txtvnoprompt preview
o Verify the Array readiness by performing PREPARE using Symconfigurecommand
-
7/31/2019 Interviw Que on Claion Latest
11/22
Symconfiguresid 4282f meta.txtvnoprompt prepare
o Execute COMMIT using Symconfigure commandSymconfiguresid 4282f meta.txtvnoprompt commit
o Verify the newly created meta devicesSymdevsid 4282 listnoport
Mappping
Find the host connected Director and Port details
symcfgsid 4282 list connections
o Find the available addresses on that port
symcfg
sid 4282 list
address
available
dir 7d
p 0
o Create a command file for mappingmap dev 26ca to dir 7d:0, lun=036;
o Verify the command line syntax by performing PREVIEW usingSymconfigure command
symconfiguresid 4282f create_hypers.txtvnop preview
o Verify the Array readiness by performing PREPARE using
-
7/31/2019 Interviw Que on Claion Latest
12/22
Symconfigure command
symconfiguresid 4282f create_hypers.txtvnop prepare
o Execute COMMIT using Symconfigure commandsymconfiguresid 4282f create_hypers.txtvnop commit
o Check the device have been mappedsymcfgsid 4282 list addressavailabledir 7dp 0
Mappping
o Masking devices to the hostsymmaskdbsid 4282wwn 10000000c93f62cfdir 7dp 0 add devs 26ca nop
Symmasksid 4282refresh
o Check whether devices have maskedsymmaskdb -sid 4282 list database -dir 7d -p 0
Step by Step Procedure for Storage Reclamation
Unmasking
-
7/31/2019 Interviw Que on Claion Latest
13/22
o Unmasking devices from the hostsymmaskdbsid 4282www 10000000c93f62cfdir 7dp 0 remove devs 26ca
o Refresh the Symmetrix ArraySymmasksid 4282refresh
Write Disableo Write Disable the devices before unmapping from the Director and from port
symdev -sid 4282 write_disable 26ca -sa 7d -p 0 -noprompt
Un-mappingo Create a cmd/txt file with the following line
Unmap dev 26ca from dir all:all;
o Perform preview operation using symconfigure commandSymconfiguresid 4282f unmap.txtvnop preview
o Perform prepare operation using symconfigure commandSymconfiguresid 4282f unmap.txtvnop prepare
o Perform Commit operation using symconfigure commandSymconfiguresid 4282f unmap.txtvnop commit
-
7/31/2019 Interviw Que on Claion Latest
14/22
o Verify that the device has been unmappedSymdevsid 4282 list -noport
Dissolve metao To Dissolve meta create a cmd/txt file with the following line
Dissolve meta dev 26ca;
o Perform preview operation using symconfigure command
Symconfigure
sid 4282
f dissolve.txt
v
nop preview
o Perform prepare operation using symconfigure commandSymconfiguresid 4282f dissolve.txtvnop prepare
o Perform Commit operation using symconfigure commandSymconfiguresid 4282f dissolve.txtvnop commit
o Verify that the meta has been Dissoved.Symdevsid 4282 listnoport
Deleting hypers
o To delete the hypers create a cmd/txt file with the following line.
-
7/31/2019 Interviw Que on Claion Latest
15/22
Delete dev 26ca:26d1;
o Perform preview operation using symconfigure commandSymconfiguresid 4282f dissolve.txtvnop preview
o Perform prepare operation using symconfigure commandSymconfiguresid 4282f dissolve.txtvnop prepare
oPerform Commit operation using symconfigure command
Symconfiguresid 4282f dissolve.txtvnop commit
o Verify that Hypers have been deleted.Symdevsid 4282 list -noport
SymCli 7 Commands brief description
Symmetrix Command Line Interface Commands Brief Description
SYMCLI BASE Commands
symapierr - Used to translate SYMAPI error code numbers into SYMAPI error messages.
symaudit - List records from a Symmetrix audit log file.
http://storage-help.blogspot.com/2010/09/symcli-7-commands-brief-description.htmlhttp://storage-help.blogspot.com/2010/09/symcli-7-commands-brief-description.htmlhttp://storage-help.blogspot.com/2010/09/symcli-7-commands-brief-description.html -
7/31/2019 Interviw Que on Claion Latest
16/22
symbcv - Perform BCV support operations on Symmetrix BCV devices.
symcfg - Discover or display Symmetrix configuration information.
Refresh the host's Symmetrix database file or remove
Symmetrix info from the file. Can also be used to view
or release a 'hanging' Symmetrix exclusive lock.
symchg - Monitor changes to Symmetrix devices or to logical
objects stored on Symmetrix devices.
symcli - Provides the version number and a brief description of
the commands included in the Symmetrix Command Line
symdev - Perform operations on a device given the device's
Symmetrix name. Can also be used to view Symmetrix device locks.
symdg - Perform operations on a device group (dg).
symdisk - Display information about the disks within a Symmetrix.
-
7/31/2019 Interviw Que on Claion Latest
17/22
symdrv - List DRV devices on a Symmetrix.
symevent - Monitor or inspect the history of events within a Symmetrix.
symgate - Perform operations on a gatekeeper device.
symhost - Display host configuration information and performance stats
syminq - Issues a SCSI Inquiry command on one or all device interface
symipsec - Administers IPSec encryption on Gigabit Ethernet connections
symlabel - Perform label support operations on a Symmetrix device.
symld - Perform operations on a device in a device group (dg).
symlmf - Registers SYMAPI license keys.
sympd - Perform operations on a device given the device's physical name.
-
7/31/2019 Interviw Que on Claion Latest
18/22
symsg - Perform operations on a storage device group (sg).
symstat - Display statistics information about a Symmetrix,
a Director, a device group, or a device.
symreturn - Used for supplying return codes in pre-action and
post-action script files.
SYMCLI CONTROL Commands
symaccess - Administer Symmetrix Access Logix.
symacl - Administer Symmetrix access control information.
symauth - Administer Symmetrix user authorization information.
symcg - Perform operations on an composite group (cg).
symchksum - Administer checksum checks when an Oracle database writes
-
7/31/2019 Interviw Que on Claion Latest
19/22
data files on Symmetrix devices.
symclone - Perform Clone control operations on a device group or on a
device within the device group.
symconfigure - Perform modifications on the Symmetrix configuration.
symconnect - Setup or Modify Symmetrix Connection Security functionality.
symfast - Administer Symmetrix FAST (Fully Automated Storage Tiering)
policies, associations, and the FAST Controller.
symmask - Setup or Modify Symmetrix Device Masking functionality.
symmaskdb - Backup, Restore, Initialize or Show the contents of
the device masking database.
symmigrate - Migrates the physical disk space associated with a
Symmetrix device to a different data protection scheme,
or to disks with different performance characteristics.
-
7/31/2019 Interviw Que on Claion Latest
20/22
symmir - Perform BCV control operations on a device group or on a
device within the device group.
symoptmz - Perform Symmetrix Optimizer control operations.
symqos - Perform Quality of Service operations on Symmetrix Devices.
symrcopy - Perform Symmetrix Rcopy control operations on devices in a device file.
symrdf - Perform RDF control operations on a device group or on a
device within the device group.
symrecover - Perform automated SRDF session recovery operations.
symreplicate - Perform automated, consistent replication of data given
a pre-configured SRDF/Timefinder setup.
symsan - List ports and LUNs visible on the SAN
-
7/31/2019 Interviw Que on Claion Latest
21/22
symsnap - Perform Symmetrix Snap control operations on a device
group or on devices in a device file.
symstar - Perform SRDF STAR management operations.
symtier - Create and manage storage tiers within a Symmetrix.
SYMCLI SRM(Mapping) Commands
symhostfs - Display information about a host File, Directory,
or host File System.
symioctl - Send IO control commands to a specified application.
symlv - Display information about a volume in Logical Volume Group (vg).
sympart - Display partition information about a host device.
symrdb - Display information about a third-party Relational Database.
-
7/31/2019 Interviw Que on Claion Latest
22/22
symrslv - Display detailed Logical to Physical mapping information
about a logical object stored on Symmetrix devices.
symvg - Display information about a Logical Volume Group (vg).