How To Make: Ocean Drop Earrings

Materials: 12 inches of 22 gauge copper wire cut into 2 even pieces, 2 drop beads (top drilled) - size 12mm x 17mm, 8 quartz beads - size 4mm, 2 copper beads - size 4mm

Tools: Round Nose Pliers, Wire Cutters

Step 1: Insert drop bead onto the middle of the wire

Step 2: Create 2 small loops

Step 3: Insert next beads, then bend a little both beads to each other in order to insert copper bead onto both wires

Step 4: Create a loop shape as shown in the photo

Step 5: Wrap wires around the bottom of the final loop and trim wire which is left. Now repeat all steps to create second earring

Step 6: Attach earwires. Your earrings are ready to wear!