How to Make:Wire Wrapped Ammonite Jewelry

Materials:Bead Stringing Wire4mm Swarovski Crystal Bicones3mm Brass SpacersCrimpsCrimp Covers7x10 mm Tourmaline Oval Beads

Tools:Chain Nose PliersWire Cutters

Step 1:Take a piece of bead stringing wire and slide your wire through the wire that is wrapped around your ammonite. Slide a crimp on both wires and crimp it.

Step 2:String on the beads for one of your dangles as well as a crimp. You can insert a crimp cover and crimp that as well. Don’t pull too tight. Trim off excess wire. Repeat for desired # of dangles.

Step 3: Now you are going to add a beaded chain and turn it into a necklace. You will need a clasp, crimps, a jump ring, and 2 eight inch pieces of chain.

Step 4:String your wire through your chain and then back through the crimp and then crimp it.