Download - HFSS Project Demo
AmphenolCommunication and Network Products Division
Amphenol CNPD Design Engineering Department’s implementation of ANSOFT 3D
High Frequency Structure Simulator
Projects to demonstrate the wide variety of devices and structures designed and fabricated
AmphenolCommunication and Network Products Division
• 7-16 Cable Plug for use with .141 Semi-Rigid Cable
• Car Mounted Antenna Assembly in Rotatable Housing
• CATV Pedestal Splice Block
• Designing the Best Launch Conditions for an MCX Receptacle on Microstrip
• Cellular Handset Surface Mount Antenna Switch with matching Circuit Connections
• Dual Band Quarter Wave Stub Lightning Protector
• 26 Ghz Single Pole Single Throw SMA Switch for GPS application
• Designing the Best Launch Conditions for an SMB Edge Mounted Receptacle on Grounded Coplanar Waveguide
• PCS Band RF Sniffer
•Stripline Mounted Cell Phone Antenna Connector
•Antenna Test Port Switch
Electric Field Plots
Proprietary Connector Design used in Mobile Satellite Antenna- Cable Assembly has SMA and MCX
Connectors
Optimize Design to Minimize Return Loss in Frequency Band of Interest
Insertion Loss Analyzed as a Function of
Connector Contact Plating
Specify launch Conditions to
Minimize Reflections
CATV Pedestal Splice Block
Time DomainFrequency Domain
SPST Antenna Switch with Matching Circuit Connections-Mated and Unmated
Adjust Connector design to Compensate for Switch
Reflections
Compensate for Reflections at Launch to Minimize Return Loss
Coupling
Return Loss
Insertion Loss
Microstrip Launched Broadband Cell Phone Antenna
Antenna Radiation and Far Field Patterns
S- Parameter Data
Phone Closed Phone Open
Antenna Test Port Switch
SMA-Special MCX Switch
Adapter