Download - f Sae Transmission
-
8/12/2019 f Sae Transmission
1/24
TRANSMISSION
- Abhishek Srivastava
- Amber Srivastava
- Dhebar Yashesh
- Kumar Saurav
-
8/12/2019 f Sae Transmission
2/24
Purpose: Transfer rotation from
engine to wheels
PARTS of Tranmission System:1) Engine
2) Gearbox
3) Clutch4) Differential
-
8/12/2019 f Sae Transmission
3/24
Engine Specifications:
Honda 600 CBR (proposed)
It comes with an inbuilt gear box and
clutch.
The engine gearbox consists of 6
gears (no reverse gear is there by
default).
-
8/12/2019 f Sae Transmission
4/24
Drive Train:
Two types
1)Chain Drive
2)Shaft Drive
Reason- The car is a rear wheel drive
and the engine is also positioned at
the back of the chasis.
CHAIN 520 and 428 can be used
-
8/12/2019 f Sae Transmission
5/24
Our transmission
In our car the output shaft from thegearbox is parallel to the axle of thewheels.
So we will be doing paralleltransmission which will use thesprocket chaindrive mechanism.
The final drive(gear-ratio of sprockets
attached to output shaft of gearboxand ring-gear of differential) ratio willbe around 4.
-
8/12/2019 f Sae Transmission
6/24
CHAIN 520 OR 428??
520 chain is mainly used by teams but 428 can also be
used
Disadvantages of 428 chain:
1) Is not as durable as 520.
2) If we use 520 then well get a higher range of gear
ratio because of the sprocket that we can use in case of
520.
Chain Type Pitch Distance b/w inner plates
520 5/8
428 5/16
428 is lighter as compared to 520 and can workefficiently for
-
8/12/2019 f Sae Transmission
7/24
Close-ratio and Wide-ratio
A close-ratio transmissionis a transmissioninwhich there is little difference between the gear
ratiosof the gears.
a transmission with large differences between
gears is termed "wide-ratio. These terms are relative.
A close-ratio is used for racing vehicles ( our case).
http://en.wikipedia.org/wiki/Transmission_(mechanics)http://en.wikipedia.org/wiki/Gear_ratiohttp://en.wikipedia.org/wiki/Gear_ratiohttp://en.wikipedia.org/wiki/Gear_ratiohttp://en.wikipedia.org/wiki/Gear_ratiohttp://en.wikipedia.org/wiki/Transmission_(mechanics) -
8/12/2019 f Sae Transmission
8/24
DIFFERENTIALSUsed to give different angular velocity to the right
and left wheel while turning.
Types:
1)Open differentials
2)Limited-slip differentials (LSD)
4)Quaife Differential
3)Torsen differentials
-
8/12/2019 f Sae Transmission
9/24
Open DifferentialThe Basic
One http://www.youtube.com/watch?v=K4J
hruinbWc
http://www.youtube.com/watch?v=K4JhruinbWchttp://www.youtube.com/watch?v=K4JhruinbWchttp://www.youtube.com/watch?v=K4JhruinbWchttp://www.youtube.com/watch?v=K4JhruinbWc -
8/12/2019 f Sae Transmission
10/24
Limited Slip Differential:
-
8/12/2019 f Sae Transmission
11/24
Torsen Differential:
-
8/12/2019 f Sae Transmission
12/24
Differential of Our interest
We will be using Torsen differential.
Reason: Over normal open diff- in the
situation when the traction on both the
wheels is different the slipping willresult in the wheel with low traction in
case of open differential while the
torsen is specially made to sort outthis perticular situation.
-
8/12/2019 f Sae Transmission
13/24
.
2) over LSD: in case of sharp or longturns (when the difference in velocity
of wheels is large or remains for a
long time resp.) differential will getlocked resulting in stopping the car.
-
8/12/2019 f Sae Transmission
14/24
CLUTCH:
Use: 1) To bring a car to a stand-still
2) to help in changing gears
Composition of clutch: Flywheel,
Pressure Plates, Clutch Plates, ClutchCover,Diaphragm Springs
Flywheel-Connected to the engine
shaft.Clutch Plates-Connected to the layshaft
of the gear box
-
8/12/2019 f Sae Transmission
15/24
Our system
Semiautomatic Transmission
(clutchless manual gearshift)
\
Kit to be used : we might be using
PROSHIFT PSU with Titanium Paddle
Shifters.
-
8/12/2019 f Sae Transmission
16/24
FINAL level of
TRANSMISSION
-
8/12/2019 f Sae Transmission
17/24
Transmission so far
We will implementing parallel transmissionfrom engine driveshaft to the wheels axel.
The differential to be used is that of
TORSEN.(considering the traction effect).
The two axels emerging out of thedifferential will be connected to wheels.
-
8/12/2019 f Sae Transmission
18/24
Between differential axel and
Wheel The gearsinside differential operateswhen
there is proper balance of forces in them fromeither side.
One part of the differential axel is connectedto the wheels(indirectly) while the other isinserted in the gear chamber of differential.
If this axel is moved in the fashion otherthan its regular rotation, it will lead toimbalance in forces of gears in gear
chamber of diff which will stop the motionof gears..
So the constraint is that this axel performsonly the specified rotational motion.
-
8/12/2019 f Sae Transmission
19/24
Between differential axel and
Wheel There are the 2 possibilities in which the
movement of axle can cause problem-
1)transversal(longitudenal movement)
2)rotational movement along some otheraxis.
2ndproblem will be solved with the help of U
joints.
-
8/12/2019 f Sae Transmission
20/24
The U joint (Universal Joint)
Made for the purpose of transformingrotational motionof one axle(in our
case the differential one) to the
second one(connected to wheel)without concerning their mutual
angular inclination.
The clip.
-
8/12/2019 f Sae Transmission
21/24
1stproblem
In total there will be 3 axel fromdifferential to wheel.
The centre one will be connected to
the axel going to the wheel via U-joint.This will solve our problem concerning
rotation about other axis.
Now remains the problem oflongitudinal displacement of diff. axle.
-
8/12/2019 f Sae Transmission
22/24
The problem is solved using plunge joint.
Two rods connected using plunge joint have
the rotational constraint irrespective of the
distance between them. The better explanation is through this clip.
http://www.youtube.com/watch?v=o8iZpjPG
4xM
Cv joint-axel assembly
http://www.youtube.com/watch?v=o8iZpjPG4xMhttp://www.youtube.com/watch?v=o8iZpjPG4xMhttp://www.youtube.com/watch?v=o8iZpjPG4xMhttp://www.youtube.com/watch?v=o8iZpjPG4xM -
8/12/2019 f Sae Transmission
23/24
The final setup
-
8/12/2019 f Sae Transmission
24/24