Diaphragm Pumps
Series 7006, 7010, 7011, 7015
Product Features
• Oil-less
• Maintenance free
• Smooth running
• Low noise level
• High lifetime
• Sealed tight
• Large choice in material
• Pressure or vacuum
Typical Applications
• Medical devices
• Analysis
• Air collector
• Inhalators
• Level surveillance
• Autoclaves
1735_17000066_en:1735_17000066_en 08.09.2006 13:28 Uhr Seite 1
2
Dra
win
g 15
798
Inch
es a
re s
how
n in
( )
Flow Curves
7006... Stock programme
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Pump parts available in PPS
Model key:
7006 VD / 2,3 / E / DC
Type Eccentric
Diaphragm, valves, O-Ring
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
General DataAmbient temperature 15 to 40 °C Media temperature 15 to 60 °C Weight 0,66 kgPort direction D
Diaphragm Pump 7006 DC
Flow 7,2 l/min
Max. pressure 2,5 bar
Max. vacuum -850 mbar
Pneumatic DataDescription 7006VD/2,3/E/DCPart number 12 V DC 70060050
24 V DC 70060052Max. flow 7,2 l/minMax. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure 2,5 barMax. vacuum -850 mbarMax. continuous vacuum -850 mbarMax. restart vacuum -850 mbar
Electrical DataMotor type Permanent magnetNominal voltage 12/24 V DCNominal speed 2800 rpmCurrent consumption 2,3/1,15 AStarting current 5,4/2,7 APower consumption 28 WMotor insulation class BProtection class IP00
All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).
– Indicate inlet/outlet ports when ordering
Standard port: – “D”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7006 DC
�
Vacuum
Pressure
Motor type
1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 2
3
Dra
win
g 15
803
Inch
es a
re s
how
n in
( )
Flow Curves
Diaphragm Pump 7006 AC
All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).
Electrical DataMotor type CapacitorNominal voltage 230 V/50 HzNominal speed 2800 rpmCurrent consumption 0,4 AStarting current 0,7 APower consumption 20 WMotor insulation class FProtection class IP00Thermal switch 150 °C
General DataAmbient temperature 15 to 40 °C Media temperature 15 to 40 °C Weight 1,6 kgPort direction A
Flow 6,9 l/min
Max. pressure 2,5 bar
Max. vacuum -850 mbar
Pneumatic DataDescription 7006VD/2,3/E/ACPart number 230 V/50 Hz 70060053Max. flow 6,9 l/minMax. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure 2,5 barMax. vacuum -850 mbarMax. continuous vacuum -850 mbarMax. restart vacuum -850 mbar
– Indicate inlet/outlet ports when ordering
Standard port: – “A”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7006 AC
�
7006... Stock programme
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Pump parts available in PPS
Model key:
7006 VD / 2,3 / E / AC
Type Eccentric
Diaphragm, valves, O-Ring
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Vacuum
PressureMotor type
1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 3
4
Diaphragm Pump 7006 AC
Dra
win
g 15
799
Inch
es a
re s
how
n in
( )
Flow 7,2 l/min
Max. pressure 2,5 bar
Max. vacuum -850 mbar
Pneumatic DataDescription 7006VD/2,3/E/AC 7006VD/2,3/E/ACPart number 115 V/60 Hz 70060063
230 V/50 Hz 70060051Max. flow 7,2 l/min 6,6 l/minMax. intermittent duty 2,5 bar 2,5 barMax. continuous pressure 0,8 bar 0,8 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -850 mbar -850 mbarMax. continuous vacuum -850 mbar -850 mbarMax. restart vacuum Ambient pressure* Ambient pressure*
Electrical DataMotor type Shaded pole Shaded poleNominal voltage 115 V/60 Hz 230 V/50 HzNominal speed 3000 rpm 2400 rpmCurrent consumption 0,9 A 0,55 AStarting current 1,15 A 0,7 APower consumption 67 W 62 WMotor insulation class H FProtection class IP00 IP00Thermal switch 150 °C 150 °C
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C Weight 1,06 kg 1,06 kgPort direction A A
* Part numbers change when restart is required with vacuum or pressure.All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).
Flow Curves
– Indicate inlet/outlet ports when ordering
Standard port: – “A”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7006 AC 115 V/60 Hz7006 AC 230 V/50 Hz
�
7006... Stock programme
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Pump parts available in PPS
Model key:
7006 VD / 2,3 / E / AC
Type Eccentric
Diaphragm, valves, O-Ring
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Vacuum
PressureMotor type
1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 4
5
Diaphragm Pump 7006 BLDC
Dra
win
g 70
0602
00M
Z-0
Inch
es a
re s
how
n in
( )
(1) For external speed control 1 to 10 V.(2) Flow at 3500 rpm.* Part numbers change when restart is required with vacuum or pressure.All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).
Electrical DataMotor type BrushlessNominal voltage 12/24 V DCNominal speed 1000/3500 rpm(1)
Current consumption 3,9/2,1 AStarting current 10,4 APower consumption 28 WMotor insulation class EProtection class IP00
General DataAmbient temperature 15 to 40 °C Media temperature 15 to 60 °C Weight 0,66 kgPort direction D
Flow 9,0 l/min
Max. pressure 2,5 bar
Max. vacuum -850 mbar
Pneumatic DataDescription 7006VD/2,3/E/BLDCPart number 12 V DC 70060200
24 V DC 70060071Max. flow 9,0 l/min(2)
Max. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure Ambient pressure*Max. vacuum -850 mbarMax. continuous vacuum -850 mbarMax. restart vacuum -850 mbar
Flow Curves
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
9,0
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7006 BLDC
�
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Pump parts available in PPS
Model key:
7006 VD / 2,3 / E / BLDC
Type Eccentric
Diaphragm, valves, O-Ring
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Vacuum
PressureMotor type
1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 5
6
Diaphragm Pump 7006ZP/ZVR DC
Dra
win
g 15
763
Inch
es a
re s
how
n in
( )
Flow 13,8 l/min
Max. pressure 2,5 bar
Max. vacuum -850 mbar
Pneumatic DataDescription 7006ZVDP/2,3/E/DC 7006ZVDR/2,3/E/DCPart number 12 V DC 70060054 70060057
24 V DC 70060055 70060058Max. flow 13,8 l/min 6,6 l/minMax. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure 2,5 barMax. vacuum -850 mbar 50 mbar abs.Max. continuous vacuum -850 mbar 50 mbar abs.Max. restart vacuum -850 mbar 50 mbar abs.
Electrical DataMotor type Permanent magnet Permanent magnetNominal voltage 12/24 V DC 12/24 V DCNominal speed 2800 rpm 2800 rpm Current consumption 3,7/2 A 3,7/2 AStarting current 8,7/4,7 A 8,7/4,7 APower consumption 48 W 48 WMotor insulation class B BProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 0,9 kg 0,9 kgPort direction CB DDConfiguration Parallel SeriesAll pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
Model key:
7006ZVDP / 2,3 / E / DC
Diaphragm, valves, O-RingDouble head
Pressure Motor type
P=ParallelR=Series
– Indicate inlet/outlet ports when ordering
Standard port: – “CB”
Type EccentricVacuum
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
15,0
14,0
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7006 ZP DC7006 ZVR DC
�
7006... Stock programme
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Pump parts available in PPS
1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 6
7
Diaphragm Pump 7006ZP AC
Dra
win
g 15
983
Inch
es a
re s
how
n in
( )
* Part numbers change when restart is required with vacuum or pressure.All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).Pneumatic data are measured at 50 Hz. At 60 Hz the performance is increased by 20 %.
Electrical DataMotor type CapacitorNominal voltage 230 V/50 HzNominal speed 2800 rpmCurrent consumption 0,4 AStarting current 0,7 APower consumption 20 WMotor insulation class FProtection class IP00Thermal switch 150 °C
General DataAmbient temperature 15 to 40 °CMedia temperature 15 to 40 °C Weight 1,8 kgPort direction CBConfiguration Parallel
Flow 13,8 l/min
Max. pressure 2,5 bar
Max. vacuum -850 mbar
Pneumatic DataDescription 7006ZVDP/2,3/E/ACPart number 230 V/50 Hz 70060056Max. flow 13,8 l/minMax. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure Ambient pressure*Max. vacuum -850 mbarMax. continuous vacuum -850 mbarMax. restart vacuum -850 mbar
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
– Indicate inlet/outlet ports when ordering
Standard port: – “CB”
Model key:
7006ZVDP / 2,3 / E / AC
Diaphragm, valves, O-RingDouble head
Pressure Motor type
P=ParallelR=Series
Type EccentricVacuum
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
15,0
14,0
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7006 ZP AC
�
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Pump parts available in PPS
1735_17000066_en:1735_17000066_en 08.09.2006 13:30 Uhr Seite 7
8
Diaphragm Pump 7006ZP AC
Dra
win
g 70
0600
75-A
Inch
es a
re s
how
n in
( )
Flow 16,2 l/min
Max. pressure 2,5 bar
Max. vacuum -850 mbar
Pneumatic DataDescription 7006ZVDP/2,3/E/AC 7006ZVR/2,3/E/AC 7006ZVDP/2,3/E/ACPart number 115 V/60 Hz 70069002
230 V/50 Hz 70060075 70060076Max. flow 14,0 l/min 6,6 l/min 16,2 l/minMax. intermittent duty 2,5 bar 2,5 barMax. continuous pressure 0,8 bar 0,8 barMax. restart pressure Ambient pressure Ambient pressureMax. vacuum -850 mbar 50 mbar abs. -850 mbarMax. continuous vacuum -850 mbar 50 mbar abs. -850 mbarMax. restart vacuum Ambient pressure Ambient pressure Ambient pressure
Electrical DataMotor type Shaded pole Shaded pole Shaded poleNominal voltage 230 V/50 Hz 230 V/50 Hz 115 V/60 HzNominal speed 2500 rpm 2500 rpm 3000 rpmCurrent consumption 0,7 A 0,7 A 1,3 AStarting current 1,1 A 1,1 A 2,0 APower consumption 180 W 180 W 185 WMotor insulation class H H HProtection class IP00 IP00 IP00Thermal switch 150 °C 150 °C 150 °C
General DataAmbient temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Weight 1,8 kg 1,8 kg 1,8 kgPort direction CB CB CBConfiguration Parallel Series Parallel
All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).Pneumatic data are measured at 50 Hz. At 60 Hz the performance is increased by 20 %.
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
deliverywithoutconnectors
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
17,016,015,014,013,012,011,010,09,08,07,06,05,04,03,02,01,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7006 ZP AC 115 V/60 Hz7006 ZP AC 230 V/50 Hz7006 ZVR AC
��
Model key:
7006ZVDP / 2,3 / E / AC
Diaphragm, valves, O-RingDouble head
Pressure Motor type
P=ParallelR=Series
Type EccentricVacuum
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Pump parts available in PPS
1735_17000066_en:1735_17000066_en 08.09.2006 13:30 Uhr Seite 8
9
Diaphragm Pump 7006ZP/ZVR BLDC
Dra
win
g 70
0602
01M
Z-0
Inch
es a
re s
how
n in
( )
Electrical DataMotor type Brushless BrushlessNominal voltage 12/24 V DC 12/24 V DCNominal speed 1000/3500 rpm(1) 1000/3500 rpm(1)
Current consumption 3,9/2,1 A 3,9/21, AStarting current 10,5 A 10,5 APower consumption 50 W 30 WMotor insulation class E EProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 0,9 kg 0,9 kgPort direction CB CBConfiguration Parallel Series
Flow 18,0 l/min
Max. pressure 2,5 bar
Max. vacuum -850 mbar
Pneumatic DataDescription 7006ZVDP/2,3/E/BLDC 7006ZVR/2,3/E/BLDCPart number 12 V DC 70060201 70060074
24 V DC 70060016 70060073Max. flow 18,0 l/min(2) 8,7 l/min(2)
Max. intermittent duty 2,5 barMax. continuous pressure 0,5 barMax. restart pressure Ambient pressure*Max. vacuum -850 mbar 50 mbar abs.Max. continuous vacuum -850 mbar 50 mbar abs.Max. restart vacuum Ambient pressure* Ambient pressure*
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
(1) For external speed control 1 to 10 V. (2) Flow at 3500 rpm.* Part numbers change when restart is required with vacuum or pressure.All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).
deliverywithoutconnectors
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
18,017,016,015,014,013,012,011,010,09,08,07,06,05,04,03,02,01,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7006 ZP BLDC7006 ZVR BLDC
�
Model key:
7006ZVDP / 2,3 / E / BLDC
Diaphragm, valves, O-RingDouble head
PressureMotor type
P=ParallelR=Series
Type EccentricVacuum
Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM
Pump parts available in PPS
1735_17000066_en:1735_17000066_en 08.09.2006 13:30 Uhr Seite 9
10
Diaphragm Pump 7010 DC
Dra
win
g 13
296
Inch
es a
re s
how
n in
( )
Flow 6,5 l/min
Max. pressure 2,2 bar
Max. vacuum -730 mbar
Pneumatic DataDescription 7010VD/2,2/N/DCPart number 12 V DC 70102502
24 V DC 70102514Max. flow 6,5 l/minMax. intermittent duty 2,2 barMax. continuous pressure 1,0 barMax. restart pressure 1,0 barMax. vacuum -730 mbarMax. continuous vacuum -730 mbarMax. restart vacuum -730 mbar
Electrical DataMotor type Permanent magnetNominal voltage 12/24 V DCNominal speed 3500/3200 rpmCurrent consumption 1,04/0,52 AStarting current 5,9/3,4 APower consumption 13 WMotor insulation class EProtection class IP00
General DataAmbient temperature 15 to 40 °C Media temperature 15 to 60 °C Weight 0,6 kg Port direction D
Flow Curves Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
– Indicate inlet/outlet ports when ordering
Standard port: – “D”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
7,0
6,5
6,0
5,5
5,0
4,5
4,0
3,5
3,0
2,5
2,0
1,5
1,0
0,5
0,0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7010/2,2 DC
�
7010... Stock programmeModel key:
7010VD / 2,2 / N / DC
Diaphragm, valves, O-Ring
Pressure
Motor typeType
Eccentric
Vacuum
1735_17000066_en:1735_17000066_en 08.09.2006 13:30 Uhr Seite 10
11
Diaphragm Pump 7010 AC
Dra
win
g 13
294
Inch
es a
re s
how
n in
( )
Electrical DataMotor type Shaded pole Shaded poleNominal voltage 115 V/60 Hz 230 V/50 HzNominal speed 2800 rpm 2300 rpmCurrent consumption 0,9 A 0,54 AStarting current 1,1 A 0,62 APower consumption 67 W 52 WMotor insulation class B EProtection class IP00 IP00Thermal switch 130 °C no
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C Weight 0,95 kg 0,95 kgPort direction A A
Flow 7,0 l/min
Max. pressure 2,3 bar
Max. vacuum -780 mbar
Pneumatic DataDescription 7010VD/2,2/N/AC 7010VD/2,2/V/ACPart number 115 V/60 Hz 70101347
230 V/50 Hz 70102532Max. flow 7,0 l/min 5,8 l/minMax. intermittent duty 2,3 bar 2,3 barMax. continuous pressure 1,2 bar 1,2 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -780 mbar -780 mbarMax. continuous vacuum -780 mbar -780 mbarMax. restart vacuum Ambient pressure* Ambient pressure*
* Part numbers change when restart is required with vacuum or pressure.
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
– Indicate inlet/outlet ports when ordering
Standard port: – “A”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
7,0
6,5
6,0
5,5
5,0
4,5
4,0
3,5
3,0
2,5
2,0
1,5
1,0
0,5
0,0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7010/2,2N AC7010/2,2V AC
�
7010... Stock programme
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Model key:
7010VD / 2,2 / N / AC
Diaphragm, valves, O-Ring
Pressure
Motor typeType
Eccentric
Vacuum
1735_17000066_en:1735_17000066_en 08.09.2006 13:31 Uhr Seite 11
12
Diaphragm Pump 7010Z DC
Dra
win
g 13
301
Inch
es a
re s
how
n in
( )
Flow 12,0 l/min
Max. pressure 2,0 bar
Max. vacuum -900 mbar
Pneumatic DataDescription 7010ZDP/2,2/NVN/DC 7010ZVR/2,2/NVN/DCPart number 12 V 70102167
24 V 70102133 70100043Max. flow 12,0 l/min 6,0 l/minMax. intermittent duty 2,0 barMax. continuous pressure 0,8 barMax. vacuum -750 mbar -900 mbarMax. continuous vacuum -750 mbar -900 mbarMax. restart vacuum Ambient pressure* -900 mbar
Electrical DataMotor type Direct current Direct current Nominal voltage 12/24 V DC 12/24 V DCNominal speed 3800/3900 rpm 3800/3900 rpmCurrent consumption 1,7/0,9 A 1,7/0,9 AStarting current 4,5/3,5 A 4,5/3,5 APower consumption 20 W 20 WMotor insulation class E EProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 0,75 kg 0,75 kgPort direction CB CBConfiguration Parallel Series
* Part numbers change when restart is required with vacuum or pressure.FM = Form diaphragm.
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
– Indicate inlet/outlet ports when ordering
Standard port: – “CB”
Model key:
7010ZDP / 2,2 / NVN / DC
Type Eccentric Motor type
Diaphragm, valves, O-RingDouble head
Pressure
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4.0
3,0
2,0
1,0
0,0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7010ZP DC7010ZR DC
�
P=ParallelR=Series
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
1735_17000066_en:1735_17000066_en 08.09.2006 13:31 Uhr Seite 12
13
Diaphragm Pump 7010Z AC
Dra
win
g 34
00In
ches
are
sho
wn
in (
)
Electrical DataMotor type Shaded pole Shaded pole Shaded poleNominal voltage 115 V/60 Hz 230 V/50 Hz 230 V/50 HzNominal speed 2900 rpm 2300 rpm 2300 rpmCurrent consumption 0,9 A 0,5 A 0,38 AStarting current 1,1 A 0,6 A 0,6 APower consumption 67 W 60 W 60 WMotor insulation class B E BProtection class IP00 IP00 IP00Thermal switch 130 °C no no
General DataAmbient temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C 15 to 60 °CWeight 1,45 kg 1,45 kg 1,45 kgPort direction CB CB CBConfiguration Parallel Parallel Series
Flow 12,5 l/min
Max. pressure 2,3 bar
Max. vacuum -900 mbar
Pneumatic DataDescription 7010ZVDP/2,2/N/AC 7010ZVDP/2,2/NVN/AC 7010ZVR/2,2/NVN/ACPart number 115 V/60 Hz 70101813
230 V/50 Hz(1) 70100196 70100448Max. flow 12,5 l/min 10,4 l/min 5,3 l/minMax. intermittent duty 2,0 bar 2,3 barMax. continuous pressure 0,8 bar 0,8 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -750 mbar -750 mbar -900 mbarMax. continuous vacuum -750 mbar -750 mbar -900 mbarMax. restart vacuum -750 mbar Ambient pressure* -900 mbar
(1) with shaded pole motor* Part numbers change when restart is required with vacuum or pressure.
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
– Indicate inlet/outlet ports when ordering
Standard port: – “CB”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4.0
3,0
2,0
1,0
0,0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7010ZP AC 115 V/60 Hz7010ZP AC 230 V/50 Hz7010ZR AC
Model key:
7010ZVDP / 2,2 / NVN / AC
Type Eccentric Motor type
Diaphragm, valves, O-RingDouble head
Pressure
P=ParallelR=Series
�
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Vacuum
1735_17000066_en:1735_17000066_en 08.09.2006 13:31 Uhr Seite 13
14
Diaphragm Pump 7011 DC
Dra
win
g 13
298
Inch
es a
re s
how
n in
( )
Flow 12,4 l/min
Max. pressure 2,3 bar
Max. vacuum -900 mbar
Pneumatic DataDescription 7011VDP/2,2/N/DC 7011VR/2,2/NVN/DCPart number 12 V DC 70110008 70110252
24 V DC 70110042Max. flow 12,4 l/min 7,5 l/minMax. intermittent duty 1,8 barMax. continuous pressure 0,8 barMax. restart pressure Ambient pressure*Max. vacuum -730 mbar -900 mbarMax. continuous vacuum -730 mbar -900 mbarMax. restart vacuum Ambient pressure* -900 mbar
Electrical DataMotor type Direct current Direct current Nominal voltage 12/24 V DC 12/24 V DCNominal speed 3800/3900 rpm 3800/3900 rpmCurrent consumption 1,7/0,9 A 1,7/0,9 AStarting current 4,5/3,5 A 4,5/3,5 APower consumption 29 W 29 WMotor insulation class E EProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 0,85 kg 0,85 kgPort direction BB BBConfiguration Parallel Series
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
* Part numbers change when restart is required with vacuum or pressure.FM = Form diaphragm.
– Indicate inlet/outlet ports when ordering
Standard port: – “BB”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4.0
3,0
2,0
1,0
0,0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7011P DC7010R DC
�
7011... Stock programme
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Model key:
7011VDP / 2,2 / NVN / DC
Type Eccentric Motor type
Diaphragm, valves, O-RingVacuum
Pressure
P=ParallelR=Series
1735_17000066_en:1735_17000066_en 08.09.2006 13:31 Uhr Seite 14
15
Diaphragm Pump 7011 AC
Dra
win
g 13
295
Inch
es a
re s
how
n in
( )
Electrical DataMotor type Shaded pole Shaded pole or Capacitor Shaded pole or CapacitorNominal voltage 115 V/60 Hz 230 V/50 Hz 230 V/50 HzNominal speed 3000 rpm 2500 rpm 2500 rpmCurrent consumption 0,9 A 0,5 A 0,5 AStarting current 1,1 A 0,6 A 0,6 APower consumption 67 W 60 W 60 WMotor insulation class B E BProtection class IP00 IP00 IP00Thermal switch 130 °C no no
General DataAmbient temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Weight 1,5 kg 1,6 kg 1,5 kgPort direction BB BB BBConfiguration Parallel Parallel Series
Flow 14,4 l/min
Max. pressure 2,3 bar
Max. vacuum -900 mbar
Pneumatic DataDescription 7011VDP/2,2/V/AC 7011VDP/2,2/VVN/AC 7011VR/2,2/NVN/ACPart number 115 V/60 Hz 70110183
230 V/50 Hz(1) 70110035 70110011Max. flow 14,4 l/min 11,0 l/min 6,2 l/minMax. intermittent duty 2,3 bar 2,2 barMax. continuous pressure 0,8 bar 0,8 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -730 mbar -730 mbar -900 mbarMax. continuous vacuum -730 mbar -730 mbar -900 mbarMax. restart vacuum Ambient pressure* Ambient pressure* -900 mbar
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
(1) with shaded pole motor FM = Form diaphragm.* Part numbers change when restart is required with vacuum or pressure.
– Indicate inlet/outlet ports * Console positionwhen ordering
Standard port: – “BB”Standard console position: * “A”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
15,0
14,0
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4,0
3,0
2,0
1,0
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7011P AC 115 V/60 Hz7011P AC 230 V/50 Hz7011R AC
��
7011... Stock programme
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Model key:
7011VDP / 2,2 / NVN / AC
Type Eccentric Motor type
Diaphragm, valves, O-RingVacuum
Pressure
P=ParallelR=Series
1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 15
16
Diaphragm Pump 7011Z DC
Dra
win
g 13
524
Inch
es a
re s
how
n in
( )
Flow 24,0 l/min
Max. pressure 2,8 bar
Max. vacuum -990 mbar
Pneumatic DataDescription 7011ZVDP/2,2/VVN/DC 7011ZVR/2,2/VVN/DCPart number 12 V DC 70110520 70110037
24 V DC 70110521 70110069Max. flow 24,0 l/min 7,0 l/minMax. intermittent duty 2,8 barMax. continuous pressure 0,5 barMax. restart pressure Ambient pressure*Max. vacuum -700 mbar 10 mbar abs.Max. continuous vacuum -700 mbar 10 mbar abs.Max. restart vacuum Ambient pressure* 10 mbar abs.
Electrical DataMotor type Direct current Direct current Nominal voltage 12/24 V DC 12/24 V DCNominal speed 3200 rpm 3200 rpmCurrent consumption 3,8/1,9 A 3,8/1,9 AStarting current 11,7/8,2 A 11,7/8,2 APower consumption 46 W 46 WMotor insulation class E EProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 1,4 kg 1,4 kgPort direction CB CBConfiguration Parallel Series
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
* Part numbers change when restart is required with vacuum or pressure.FM = Form diaphragm.
– Indicate inlet/outlet ports when ordering
Standard port: – “CB”
Model key:
7011ZVDP / 2,2 / VVN / DC
Double head Diaphragm, valves, O-Ring
Flow [l/min]
Vacuum [mbar] Pressure [bar]
P=ParallelR=Series
Type Eccentric Motor type
Vacuum
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Pressure
-990 -800 -600 -400 -200 0 0,3 0,6 0,9 1,2 1,5 1,8 2,1 2,4 2,7
27,5
25,0
22,5
20,0
17,5
15,0
12,5
10,0
7,5
5,0
2,5
0
7011ZVDP DC7011ZVR DC
1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 16
17
Diaphragm Pump 7011Z AC
Dra
win
g 13
356
Inch
es a
re s
how
n in
( )
Electrical DataMotor type Capacitor CapacitorNominal voltage 230 V/50 Hz 230 V/50 HzNominal speed 2700 rpm 2700 rpmCurrent consumption 0,38 A 0,38 AStarting current 0,5 A 0,5 APower consumption 67 W 67 WMotor insulation class B BProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C Weight 2,3 kg 2,3 kgPort direction CB CBConfiguration Parallel Series
Flow 16,0 l/min
Max. pressure 2,2 bar
Max. vacuum -730 mbar
Pneumatic DataDescription 7011ZVDP/2,2/NVN/AC 7011ZVR/2,2/VVN/ACPart number 230 V/50 Hz 70110333 70110086Max. flow 16,0 l/min 6,2 l/minMax. intermittent duty 2,2 barMax. continuous pressure 1,0 barMax. restart pressure Ambient pressure*Max. vacuum -730 mbar 40 mbar abs.Max. continuous vacuum -730 mbar 40 mbar abs.Max. restart vacuum Ambient pressure* 40 mbar abs.
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
* Part numbers change when restart is required with vacuum or pressure.FM = Form diaphragm.
– Indicate inlet/outlet ports * Console positionwhen ordering
Standard port: – “CB”Standard console position: * “A”
The indicated shock absorbers are not includedin delivery
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,4 0,8 1,2 1,6 2,0
17,5
15,0
12,5
10,0
7,5
5,0
2,5
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7011ZVDP AC7011ZVR AC
�
Model key:
7011ZVDP / 2,2 / NVN / AC
Double head Diaphragm, valves, O-Ring
P=ParallelR=Series
Type Eccentric Motor type
Vacuum
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Pressure
1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 17
18
Diaphragm Pump 7015 DC
Dra
win
g 13
316-
AIn
ches
are
sho
wn
in (
)
Electrical DataMotor type Direct current Direct current Nominal voltage 12/24 V DC 12/24 V DCNominal speed 2800 rpm 2800 rpmCurrent consumption 2,2/0,91 A 2,2/0,91 AStarting current 8,7/5,3 A 8,7/5,3 APower consumption 27 W 27 WMotor insulation class E EProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 1,1 kg 1,1 kg Port direction D D
Flow 14,0 l/min
Max. pressure 2,5 bar
Max. vacuum -800 mbar
Pneumatic DataDescription 7015VD/2,5/V/DC 7015VD/2,5/V/DCPart number 12 V DC 70152005
24 V DC 70152006(1)
Max. flow 14,0 l/min 14,0 l/minMax. intermittent duty 2,5 bar 2,5 barMax. continuous pressure 1 bar 1 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -800 mbar -800 mbarMax. continuous vacuum -800 mbar -800 mbarMax. restart vacuum -800 mbar -800 mbar
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
(1) restart with vacuum.* Part numbers change when restart is required with vacuum or pressure.
– Indicate inlet/outlet ports when ordering
Standard port: – “D”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
15
10
5
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7015 DC
�
Model key:
7015VD / 2,5 / V / DC
Diaphragm, valves, O-Ring
Type Eccentric Motor type
Vacuum
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Pressure
1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 18
19
Diaphragm Pump 7015 AC
Model key:
7015VD / 2,5 / EVV / AC
Diaphragm, valves, O-Ring
Type Eccentric Motor type
Vacuum
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Pressure
Dra
win
g 13
538
Inch
es a
re s
how
n in
( )
Flow 14,4 l/min
Max. pressure 2,5 bar
Max. vacuum -800 mbar
Pneumatic DataDescription 7015VD/2,5/EVV/ACPart number 230 V/50 Hz 70150022(1)
Max. flow 12,0 l/minMax. intermittent duty 2,5 barMax. continuous pressure 1,2 barMax. restart pressure Ambient pressure*Max. vacuum -800 mbarMax. continuous vacuum -800 mbarMax. restart vacuum -800 mbar
Electrical DataMotor type Shaded pole/Capacitor(1)
Nominal voltage 230 V/50 HzNominal speed 2400 rpmCurrent consumption 0,56/0,38 AStarting current 0,6 APower consumption 80 WMotor insulation class E/BProtection class IP00
General DataAmbient temperature 15 to 40 °C Media temperature 15 to 40 °C Weight 1,8/2,0 kgPort direction A(1) for pressures over 1,5 bar capacitor motors are necessary.* Part numbers change when restart is required with vacuum or pressure.
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
– Indicate inlet/outlet ports when ordering
Standard port: – “A”
Flow [l/min]
Vacuum [mbar] Pressure [bar]
�
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
15
10
5
0
7015 AC 230 V/50 Hz
�
1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 19
20
Diaphragm Pump 7015Z DC
Dra
win
g 13
320-
AIn
ches
are
sho
wn
in (
)
* Part numbers change when restart is required with vacuum or pressure.
Electrical DataMotor type Direct current Direct current Nominal voltage 12/24 V DC 12/24 V DCNominal speed 2300/2500 rpm 2300/2500 rpmCurrent consumption 6,0/3,0 A 6,0/3,0 AStarting current 18,0/9,0 A 18,0/9,0 APower consumption 72 W 72 WMotor insulation class E EProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 1,5 kg 1,5 kgPort direction CB CBConfiguration Parallel Series
Flow 27,0 l/min
Max. pressure 2,5 bar
Max. vacuum -900 mbar
Pneumatic DataDescription 7015ZVDP/2,5/V/DC 7015ZVR/2,5/V/DCPart number 12 V DC 70152009 70152015
24 V DC 70152010 70152016Max. flow 27,0 l/min 12,0 l/minMax. intermittent duty 3,0 barMax. continuous pressure 1,0 barMax. restart pressure Ambient pressure*Max. vacuum -800 mbar -920 mbarMax. continuous vacuum -800 mbar -920 mbarMax. restart vacuum -800 mbar -920 mbar
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
– Indicate inlet/outlet ports when ordering
Standard port: – “CB”
Flow [l/min]
Vacuum [mbar] Pressure [bar]
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Model key:
7015ZVDP / 2,5 / V / DC
Double head
Diaphragm, valves, O-Ring
P=ParallelR=Series
Type Eccentric Motor type
VacuumPressure
-1000 -900 -800 -700 -600 -500 -400 -300 -200 -100 0 1,0 2,0 3,0 4,0
30
25
20
15
10
5
0
7015 ZVDP DC7015 ZVR DC
1735_17000066_en:1735_17000066_en 08.09.2006 13:33 Uhr Seite 20
21
Diaphragm Pump 7015Z AC
Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel
Model key:
7015ZVDP / 2,5 / V / AC
Double head
Diaphragm, valves, O-Ring
P=ParallelR=Series
Type Eccentric Motor type
VacuumPressure
Dra
win
g 13
585
Inch
es a
re s
how
n in
( )
Flow 22,0 l/min
Max. pressure 2,5 bar
Max. vacuum -900 mbar
Pneumatic DataDescription 7015ZVDP/2,5/V/AC 7015ZVR/2,5/EVV/ACPart number 230 V/50 Hz 70152008 70150132Max. flow 22,0 l/min 12,0 l/minMax. intermittent duty 2,5 barMax. continuous pressure 1,0 barMax. restart pressure Ambient pressure*Max. vacuum -800 mbar -900 mbarMax. continuous vacuum -800 mbar -900 mbarMax. restart vacuum Ambient pressure* -900 mbar
Electrical DataMotor type Capacitor CapacitorNominal voltage 230 V/50 Hz 230 V/50 Hz Nominal speed 2700 rpm 2700 rpmCurrent consumption 0,38 A 0,38 AStarting current 0,5 A 0,5 APower consumption 67 W 67 WMotor insulation class B BProtection class IP00 IP00
General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C Weight 2,4 kg 2,4 kgPort direction CB CBConfiguration Parallel Series
Flow Curves
The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.
* Part numbers change when restart is required with vacuum or pressure.
– Indicate inlet/outlet ports when ordering
Standard port: – “CB”
-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5
25
20
15
10
5
0
Flow [l/min]
Vacuum [mbar] Pressure [bar]
7015ZP AC7015ZR AC
�
1735_17000066_en:1735_17000066_en 08.09.2006 13:33 Uhr Seite 21
22
References
Material choice for 7010 / 7011 / 7015 single and double head
Abbreviation Air Air Ozone Gases Alcohols Temperature limitsDiaphragm, valves, O-Rings inert gases aggressive Humid aggressive gas °CNBR (Perbunan®) N + 0 – – – -10/+90EPDM E + +/0 + +/0 +/0 -20/+90FKM/FPM (Viton®) V + + 0 +/0 –/0 +15/200FFKM/FFPM (Simriz®, Kalrez®) K + + + + + 200PTFE (Teflon®) P + + + + + 250
Pump chamber, Pump head, Fixating plate (Diaphragm plate)Polyarylamide (IXEF®) + 0 0 0 + 130PVDF + + + + + 90PVC + + + + + 80PA (Durethane®) + 0 – 0 0 90PPS (Ryton®) + + + + + 160Stainless steel 1.4571 VA + + + 0 +Aluminium (7015) + 0/– + – +
Exact data can be obtained on request. We recommend tests with materials in case of critical or unclear applications.
+= good0 = critical, tests necessary–= bad to instable
Voltages:Pumps with alternating current shaded pole motors can be delivered with 24V to 240V.
AAbbreviations:“P” = Parallel connections of several single heads“R” = Serial connections of several single heads“V” = Vacuum restart“D” = Pressure restart“Z” = Double head version (Note: type 7011 already has two heads, therefore type 7011Z is a 4 – headed pump)
AAdditional descriptions:The additives ”D” and ”V” are only relevant for the restart against pressure/vacuum.Every version can build pressure and vacuum restart against atmospheric pressure.
1735_17000066_en:1735_17000066_en 08.09.2006 13:33 Uhr Seite 22
Printed in Germany.Art.-Nr.: 17000066 08/2006
Gardner Denver Thomas GmbHSiemensstraße 4 · Gewerbegebiet Nord · D-82178 PuchheimPhone: +49 89 80900-0 · Fax: +49 89 808368e-Mail: [email protected] · http://www.gd-thomas.com