diaphragm pumps - 동방하이테크를 찾아주셔서 감사합니다. diaphragm pump 7006 ac...

Diaphragm Pumps

Series 7006, 7010, 7011, 7015

Product Features

• Oil-less

• Maintenance free

• Smooth running

• Low noise level

• High lifetime

• Sealed tight

• Large choice in material

• Pressure or vacuum

Typical Applications

• Medical devices

• Analysis

• Air collector

• Inhalators

• Level surveillance

• Autoclaves

1735_17000066_en:1735_17000066_en 08.09.2006 13:28 Uhr Seite 1

2

Dra

win

g 15

798

Inch

es a

re s

how

n in

( )

Flow Curves

7006... Stock programme

Wetted partsPump head PolyarylamideDiaphragm, valves, O-Ring EPDM

Pump parts available in PPS

Model key:

7006 VD / 2,3 / E / DC

Type Eccentric

Diaphragm, valves, O-Ring

The information presented in this material is based on technical data andtest results of nominal units. It is believed to be accurate and reliable and isoffered as an aid to help in the selection of Thomas products. It is the respon-sibility of the user to determine the suitability of the product for the intendeduse and the user assumes all risk and liability whatsoever in connectiontherewith. Thomas does not warrant, guarantee or assume any obligation orliability in connection with this information.

General DataAmbient temperature 15 to 40 °C Media temperature 15 to 60 °C Weight 0,66 kgPort direction D

Diaphragm Pump 7006 DC

Flow 7,2 l/min

Max. pressure 2,5 bar

Max. vacuum -850 mbar

Pneumatic DataDescription 7006VD/2,3/E/DCPart number 12 V DC 70060050

24 V DC 70060052Max. flow 7,2 l/minMax. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure 2,5 barMax. vacuum -850 mbarMax. continuous vacuum -850 mbarMax. restart vacuum -850 mbar

Electrical DataMotor type Permanent magnetNominal voltage 12/24 V DCNominal speed 2800 rpmCurrent consumption 2,3/1,15 AStarting current 5,4/2,7 APower consumption 28 WMotor insulation class BProtection class IP00

All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).

– Indicate inlet/outlet ports when ordering

Standard port: – “D”

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

8,0

7,0

6,0

5,0

4,0

3,0

2,0

1,0

0

Flow [l/min]

Vacuum [mbar] Pressure [bar]

7006 DC

�

Vacuum

Pressure

Motor type

1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 2

3

Dra

win

g 15

803

Inch

es a

re s

how

n in

( )

Flow Curves

Diaphragm Pump 7006 AC

All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).

Electrical DataMotor type CapacitorNominal voltage 230 V/50 HzNominal speed 2800 rpmCurrent consumption 0,4 AStarting current 0,7 APower consumption 20 WMotor insulation class FProtection class IP00Thermal switch 150 °C

General DataAmbient temperature 15 to 40 °C Media temperature 15 to 40 °C Weight 1,6 kgPort direction A

Flow 6,9 l/min



Pneumatic DataDescription 7006VD/2,3/E/ACPart number 230 V/50 Hz 70060053Max. flow 6,9 l/minMax. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure 2,5 barMax. vacuum -850 mbarMax. continuous vacuum -850 mbarMax. restart vacuum -850 mbar


Standard port: – “A”

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

8,0

7,0

6,0

5,0

4,0

3,0

2,0

1,0

0

Flow [l/min]


7006 AC

�




Model key:

7006 VD / 2,3 / E / AC

Type Eccentric



Vacuum

PressureMotor type

1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 3

4


Dra

win

g 15

799

Inch

es a

re s

how

n in

( )

Flow 7,2 l/min



Pneumatic DataDescription 7006VD/2,3/E/AC 7006VD/2,3/E/ACPart number 115 V/60 Hz 70060063

230 V/50 Hz 70060051Max. flow 7,2 l/min 6,6 l/minMax. intermittent duty 2,5 bar 2,5 barMax. continuous pressure 0,8 bar 0,8 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -850 mbar -850 mbarMax. continuous vacuum -850 mbar -850 mbarMax. restart vacuum Ambient pressure* Ambient pressure*

Electrical DataMotor type Shaded pole Shaded poleNominal voltage 115 V/60 Hz 230 V/50 HzNominal speed 3000 rpm 2400 rpmCurrent consumption 0,9 A 0,55 AStarting current 1,15 A 0,7 APower consumption 67 W 62 WMotor insulation class H FProtection class IP00 IP00Thermal switch 150 °C 150 °C

General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C Weight 1,06 kg 1,06 kgPort direction A A

* Part numbers change when restart is required with vacuum or pressure.All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).

Flow Curves



-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

8,0

7,0

6,0

5,0

4,0

3,0

2,0

1,0

0

Flow [l/min]


7006 AC 115 V/60 Hz7006 AC 230 V/50 Hz

�




Model key:

7006 VD / 2,3 / E / AC

Type Eccentric



Vacuum

PressureMotor type

1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 4

5

Diaphragm Pump 7006 BLDC

Dra

win

g 70

0602

00M

Z-0

Inch

es a

re s

how

n in

( )

(1) For external speed control 1 to 10 V.(2) Flow at 3500 rpm.* Part numbers change when restart is required with vacuum or pressure.All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).

Electrical DataMotor type BrushlessNominal voltage 12/24 V DCNominal speed 1000/3500 rpm(1)

Current consumption 3,9/2,1 AStarting current 10,4 APower consumption 28 WMotor insulation class EProtection class IP00

General DataAmbient temperature 15 to 40 °C Media temperature 15 to 60 °C Weight 0,66 kgPort direction D

Flow 9,0 l/min



Pneumatic DataDescription 7006VD/2,3/E/BLDCPart number 12 V DC 70060200

24 V DC 70060071Max. flow 9,0 l/min(2)

Max. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure Ambient pressure*Max. vacuum -850 mbarMax. continuous vacuum -850 mbarMax. restart vacuum -850 mbar

Flow Curves

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

9,0

8,0

7,0

6,0

5,0

4,0

3,0

2,0

1,0

0

Flow [l/min]


7006 BLDC

�



Model key:

7006 VD / 2,3 / E / BLDC

Type Eccentric



Vacuum

PressureMotor type

1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 5

6

Diaphragm Pump 7006ZP/ZVR DC

Dra

win

g 15

763

Inch

es a

re s

how

n in

( )

Flow 13,8 l/min



Pneumatic DataDescription 7006ZVDP/2,3/E/DC 7006ZVDR/2,3/E/DCPart number 12 V DC 70060054 70060057

24 V DC 70060055 70060058Max. flow 13,8 l/min 6,6 l/minMax. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure 2,5 barMax. vacuum -850 mbar 50 mbar abs.Max. continuous vacuum -850 mbar 50 mbar abs.Max. restart vacuum -850 mbar 50 mbar abs.

Electrical DataMotor type Permanent magnet Permanent magnetNominal voltage 12/24 V DC 12/24 V DCNominal speed 2800 rpm 2800 rpm Current consumption 3,7/2 A 3,7/2 AStarting current 8,7/4,7 A 8,7/4,7 APower consumption 48 W 48 WMotor insulation class B BProtection class IP00 IP00

General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 0,9 kg 0,9 kgPort direction CB DDConfiguration Parallel SeriesAll pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).

Flow Curves


Model key:

7006ZVDP / 2,3 / E / DC

Diaphragm, valves, O-RingDouble head

Pressure Motor type

P=ParallelR=Series


Standard port: – “CB”

Type EccentricVacuum

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

15,0

14,0

13,0

12,0

11,0

10,0

9,0

8,0

7,0

6,0

5,0

4,0

3,0

2,0

1,0

0

Flow [l/min]


7006 ZP DC7006 ZVR DC

�




1735_17000066_en:1735_17000066_en 08.09.2006 13:29 Uhr Seite 6

7

Diaphragm Pump 7006ZP AC

Dra

win

g 15

983

Inch

es a

re s

how

n in

( )

* Part numbers change when restart is required with vacuum or pressure.All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).Pneumatic data are measured at 50 Hz. At 60 Hz the performance is increased by 20 %.

Electrical DataMotor type CapacitorNominal voltage 230 V/50 HzNominal speed 2800 rpmCurrent consumption 0,4 AStarting current 0,7 APower consumption 20 WMotor insulation class FProtection class IP00Thermal switch 150 °C

General DataAmbient temperature 15 to 40 °CMedia temperature 15 to 40 °C Weight 1,8 kgPort direction CBConfiguration Parallel

Flow 13,8 l/min



Pneumatic DataDescription 7006ZVDP/2,3/E/ACPart number 230 V/50 Hz 70060056Max. flow 13,8 l/minMax. intermittent duty 2,5 barMax. continuous pressure 0,8 barMax. restart pressure Ambient pressure*Max. vacuum -850 mbarMax. continuous vacuum -850 mbarMax. restart vacuum -850 mbar

Flow Curves




Model key:

7006ZVDP / 2,3 / E / AC


Pressure Motor type

P=ParallelR=Series


-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

15,0

14,0

13,0

12,0

11,0

10,0

9,0

8,0

7,0

6,0

5,0

4,0

3,0

2,0

1,0

0

Flow [l/min]


7006 ZP AC

�



1735_17000066_en:1735_17000066_en 08.09.2006 13:30 Uhr Seite 7

8

Diaphragm Pump 7006ZP AC

Dra

win

g 70

0600

75-A

Inch

es a

re s

how

n in

( )

Flow 16,2 l/min



Pneumatic DataDescription 7006ZVDP/2,3/E/AC 7006ZVR/2,3/E/AC 7006ZVDP/2,3/E/ACPart number 115 V/60 Hz 70069002

230 V/50 Hz 70060075 70060076Max. flow 14,0 l/min 6,6 l/min 16,2 l/minMax. intermittent duty 2,5 bar 2,5 barMax. continuous pressure 0,8 bar 0,8 barMax. restart pressure Ambient pressure Ambient pressureMax. vacuum -850 mbar 50 mbar abs. -850 mbarMax. continuous vacuum -850 mbar 50 mbar abs. -850 mbarMax. restart vacuum Ambient pressure Ambient pressure Ambient pressure

Electrical DataMotor type Shaded pole Shaded pole Shaded poleNominal voltage 230 V/50 Hz 230 V/50 Hz 115 V/60 HzNominal speed 2500 rpm 2500 rpm 3000 rpmCurrent consumption 0,7 A 0,7 A 1,3 AStarting current 1,1 A 1,1 A 2,0 APower consumption 180 W 180 W 185 WMotor insulation class H H HProtection class IP00 IP00 IP00Thermal switch 150 °C 150 °C 150 °C

General DataAmbient temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Weight 1,8 kg 1,8 kg 1,8 kgPort direction CB CB CBConfiguration Parallel Series Parallel

All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).Pneumatic data are measured at 50 Hz. At 60 Hz the performance is increased by 20 %.

Flow Curves


deliverywithoutconnectors

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

17,016,015,014,013,012,011,010,09,08,07,06,05,04,03,02,01,0

0

Flow [l/min]


7006 ZP AC 115 V/60 Hz7006 ZP AC 230 V/50 Hz7006 ZVR AC

��

Model key:

7006ZVDP / 2,3 / E / AC


Pressure Motor type

P=ParallelR=Series




1735_17000066_en:1735_17000066_en 08.09.2006 13:30 Uhr Seite 8

9

Diaphragm Pump 7006ZP/ZVR BLDC

Dra

win

g 70

0602

01M

Z-0

Inch

es a

re s

how

n in

( )

Electrical DataMotor type Brushless BrushlessNominal voltage 12/24 V DC 12/24 V DCNominal speed 1000/3500 rpm(1) 1000/3500 rpm(1)

Current consumption 3,9/2,1 A 3,9/21, AStarting current 10,5 A 10,5 APower consumption 50 W 30 WMotor insulation class E EProtection class IP00 IP00

General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 0,9 kg 0,9 kgPort direction CB CBConfiguration Parallel Series

Flow 18,0 l/min



Pneumatic DataDescription 7006ZVDP/2,3/E/BLDC 7006ZVR/2,3/E/BLDCPart number 12 V DC 70060201 70060074

24 V DC 70060016 70060073Max. flow 18,0 l/min(2) 8,7 l/min(2)

Max. intermittent duty 2,5 barMax. continuous pressure 0,5 barMax. restart pressure Ambient pressure*Max. vacuum -850 mbar 50 mbar abs.Max. continuous vacuum -850 mbar 50 mbar abs.Max. restart vacuum Ambient pressure* Ambient pressure*

Flow Curves


(1) For external speed control 1 to 10 V. (2) Flow at 3500 rpm.* Part numbers change when restart is required with vacuum or pressure.All pumps are available with the following materials: FPM (V), NBR, PTFE (in this case, the valves are FFPM).

deliverywithoutconnectors

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

18,017,016,015,014,013,012,011,010,09,08,07,06,05,04,03,02,01,0

0

Flow [l/min]


7006 ZP BLDC7006 ZVR BLDC

�

Model key:

7006ZVDP / 2,3 / E / BLDC


PressureMotor type

P=ParallelR=Series




1735_17000066_en:1735_17000066_en 08.09.2006 13:30 Uhr Seite 9

10


Dra

win

g 13

296

Inch

es a

re s

how

n in

( )

Flow 6,5 l/min



Pneumatic DataDescription 7010VD/2,2/N/DCPart number 12 V DC 70102502

24 V DC 70102514Max. flow 6,5 l/minMax. intermittent duty 2,2 barMax. continuous pressure 1,0 barMax. restart pressure 1,0 barMax. vacuum -730 mbarMax. continuous vacuum -730 mbarMax. restart vacuum -730 mbar

Electrical DataMotor type Permanent magnetNominal voltage 12/24 V DCNominal speed 3500/3200 rpmCurrent consumption 1,04/0,52 AStarting current 5,9/3,4 APower consumption 13 WMotor insulation class EProtection class IP00

General DataAmbient temperature 15 to 40 °C Media temperature 15 to 60 °C Weight 0,6 kg Port direction D

Flow Curves Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel




-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

7,0

6,5

6,0

5,5

5,0

4,5

4,0

3,5

3,0

2,5

2,0

1,5

1,0

0,5

0,0

Flow [l/min]


7010/2,2 DC

�

7010... Stock programmeModel key:

7010VD / 2,2 / N / DC


Pressure

Motor typeType

Eccentric

Vacuum

1735_17000066_en:1735_17000066_en 08.09.2006 13:30 Uhr Seite 10

11


Dra

win

g 13

294

Inch

es a

re s

how

n in

( )

Electrical DataMotor type Shaded pole Shaded poleNominal voltage 115 V/60 Hz 230 V/50 HzNominal speed 2800 rpm 2300 rpmCurrent consumption 0,9 A 0,54 AStarting current 1,1 A 0,62 APower consumption 67 W 52 WMotor insulation class B EProtection class IP00 IP00Thermal switch 130 °C no

General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C Weight 0,95 kg 0,95 kgPort direction A A

Flow 7,0 l/min



Pneumatic DataDescription 7010VD/2,2/N/AC 7010VD/2,2/V/ACPart number 115 V/60 Hz 70101347

230 V/50 Hz 70102532Max. flow 7,0 l/min 5,8 l/minMax. intermittent duty 2,3 bar 2,3 barMax. continuous pressure 1,2 bar 1,2 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -780 mbar -780 mbarMax. continuous vacuum -780 mbar -780 mbarMax. restart vacuum Ambient pressure* Ambient pressure*

* Part numbers change when restart is required with vacuum or pressure.

Flow Curves




-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

7,0

6,5

6,0

5,5

5,0

4,5

4,0

3,5

3,0

2,5

2,0

1,5

1,0

0,5

0,0

Flow [l/min]


7010/2,2N AC7010/2,2V AC

�


Wetted partsPump chamber PolyarylamidePump head PolyamideDiaphragm, valves, O-Ring FPM (V), NBR, EPDMDiaphragm, plate, screw Galvanized steel

Model key:

7010VD / 2,2 / N / AC


Pressure

Motor typeType

Eccentric

Vacuum

1735_17000066_en:1735_17000066_en 08.09.2006 13:31 Uhr Seite 11

12

Diaphragm Pump 7010Z DC

Dra

win

g 13

301

Inch

es a

re s

how

n in

( )

Flow 12,0 l/min



Pneumatic DataDescription 7010ZDP/2,2/NVN/DC 7010ZVR/2,2/NVN/DCPart number 12 V 70102167

24 V 70102133 70100043Max. flow 12,0 l/min 6,0 l/minMax. intermittent duty 2,0 barMax. continuous pressure 0,8 barMax. vacuum -750 mbar -900 mbarMax. continuous vacuum -750 mbar -900 mbarMax. restart vacuum Ambient pressure* -900 mbar

Electrical DataMotor type Direct current Direct current Nominal voltage 12/24 V DC 12/24 V DCNominal speed 3800/3900 rpm 3800/3900 rpmCurrent consumption 1,7/0,9 A 1,7/0,9 AStarting current 4,5/3,5 A 4,5/3,5 APower consumption 20 W 20 WMotor insulation class E EProtection class IP00 IP00


* Part numbers change when restart is required with vacuum or pressure.FM = Form diaphragm.

Flow Curves




Model key:

7010ZDP / 2,2 / NVN / DC

Type Eccentric Motor type


Pressure

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

13,0

12,0

11,0

10,0

9,0

8,0

7,0

6,0

5,0

4.0

3,0

2,0

1,0

0,0

Flow [l/min]


7010ZP DC7010ZR DC

�

P=ParallelR=Series


1735_17000066_en:1735_17000066_en 08.09.2006 13:31 Uhr Seite 12

13

Diaphragm Pump 7010Z AC

Dra

win

g 34

00In

ches

are

sho

wn

in (

)

Electrical DataMotor type Shaded pole Shaded pole Shaded poleNominal voltage 115 V/60 Hz 230 V/50 Hz 230 V/50 HzNominal speed 2900 rpm 2300 rpm 2300 rpmCurrent consumption 0,9 A 0,5 A 0,38 AStarting current 1,1 A 0,6 A 0,6 APower consumption 67 W 60 W 60 WMotor insulation class B E BProtection class IP00 IP00 IP00Thermal switch 130 °C no no

General DataAmbient temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C 15 to 60 °CWeight 1,45 kg 1,45 kg 1,45 kgPort direction CB CB CBConfiguration Parallel Parallel Series

Flow 12,5 l/min



Pneumatic DataDescription 7010ZVDP/2,2/N/AC 7010ZVDP/2,2/NVN/AC 7010ZVR/2,2/NVN/ACPart number 115 V/60 Hz 70101813

230 V/50 Hz(1) 70100196 70100448Max. flow 12,5 l/min 10,4 l/min 5,3 l/minMax. intermittent duty 2,0 bar 2,3 barMax. continuous pressure 0,8 bar 0,8 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -750 mbar -750 mbar -900 mbarMax. continuous vacuum -750 mbar -750 mbar -900 mbarMax. restart vacuum -750 mbar Ambient pressure* -900 mbar

(1) with shaded pole motor* Part numbers change when restart is required with vacuum or pressure.

Flow Curves




-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

13,0

12,0

11,0

10,0

9,0

8,0

7,0

6,0

5,0

4.0

3,0

2,0

1,0

0,0

Flow [l/min]


7010ZP AC 115 V/60 Hz7010ZP AC 230 V/50 Hz7010ZR AC

Model key:

7010ZVDP / 2,2 / NVN / AC



Pressure

P=ParallelR=Series

�


Vacuum

1735_17000066_en:1735_17000066_en 08.09.2006 13:31 Uhr Seite 13

14


Dra

win

g 13

298

Inch

es a

re s

how

n in

( )

Flow 12,4 l/min



Pneumatic DataDescription 7011VDP/2,2/N/DC 7011VR/2,2/NVN/DCPart number 12 V DC 70110008 70110252

24 V DC 70110042Max. flow 12,4 l/min 7,5 l/minMax. intermittent duty 1,8 barMax. continuous pressure 0,8 barMax. restart pressure Ambient pressure*Max. vacuum -730 mbar -900 mbarMax. continuous vacuum -730 mbar -900 mbarMax. restart vacuum Ambient pressure* -900 mbar


General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 0,85 kg 0,85 kgPort direction BB BBConfiguration Parallel Series

Flow Curves




Standard port: – “BB”

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

13,0

12,0

11,0

10,0

9,0

8,0

7,0

6,0

5,0

4.0

3,0

2,0

1,0

0,0

Flow [l/min]


7011P DC7010R DC

�



Model key:

7011VDP / 2,2 / NVN / DC


Diaphragm, valves, O-RingVacuum

Pressure

P=ParallelR=Series

1735_17000066_en:1735_17000066_en 08.09.2006 13:31 Uhr Seite 14

15


Dra

win

g 13

295

Inch

es a

re s

how

n in

( )

Electrical DataMotor type Shaded pole Shaded pole or Capacitor Shaded pole or CapacitorNominal voltage 115 V/60 Hz 230 V/50 Hz 230 V/50 HzNominal speed 3000 rpm 2500 rpm 2500 rpmCurrent consumption 0,9 A 0,5 A 0,5 AStarting current 1,1 A 0,6 A 0,6 APower consumption 67 W 60 W 60 WMotor insulation class B E BProtection class IP00 IP00 IP00Thermal switch 130 °C no no

General DataAmbient temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Media temperature 15 to 40 °C 15 to 40 °C 15 to 40 °C Weight 1,5 kg 1,6 kg 1,5 kgPort direction BB BB BBConfiguration Parallel Parallel Series

Flow 14,4 l/min



Pneumatic DataDescription 7011VDP/2,2/V/AC 7011VDP/2,2/VVN/AC 7011VR/2,2/NVN/ACPart number 115 V/60 Hz 70110183

230 V/50 Hz(1) 70110035 70110011Max. flow 14,4 l/min 11,0 l/min 6,2 l/minMax. intermittent duty 2,3 bar 2,2 barMax. continuous pressure 0,8 bar 0,8 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -730 mbar -730 mbar -900 mbarMax. continuous vacuum -730 mbar -730 mbar -900 mbarMax. restart vacuum Ambient pressure* Ambient pressure* -900 mbar

Flow Curves


(1) with shaded pole motor FM = Form diaphragm.* Part numbers change when restart is required with vacuum or pressure.

– Indicate inlet/outlet ports * Console positionwhen ordering

Standard port: – “BB”Standard console position: * “A”

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

15,0

14,0

13,0

12,0

11,0

10,0

9,0

8,0

7,0

6,0

5,0

4,0

3,0

2,0

1,0

0

Flow [l/min]


7011P AC 115 V/60 Hz7011P AC 230 V/50 Hz7011R AC

��



Model key:

7011VDP / 2,2 / NVN / AC


Diaphragm, valves, O-RingVacuum

Pressure

P=ParallelR=Series

1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 15

16


Dra

win

g 13

524

Inch

es a

re s

how

n in

( )

Flow 24,0 l/min



Pneumatic DataDescription 7011ZVDP/2,2/VVN/DC 7011ZVR/2,2/VVN/DCPart number 12 V DC 70110520 70110037

24 V DC 70110521 70110069Max. flow 24,0 l/min 7,0 l/minMax. intermittent duty 2,8 barMax. continuous pressure 0,5 barMax. restart pressure Ambient pressure*Max. vacuum -700 mbar 10 mbar abs.Max. continuous vacuum -700 mbar 10 mbar abs.Max. restart vacuum Ambient pressure* 10 mbar abs.

Electrical DataMotor type Direct current Direct current Nominal voltage 12/24 V DC 12/24 V DCNominal speed 3200 rpm 3200 rpmCurrent consumption 3,8/1,9 A 3,8/1,9 AStarting current 11,7/8,2 A 11,7/8,2 APower consumption 46 W 46 WMotor insulation class E EProtection class IP00 IP00


Flow Curves





Model key:

7011ZVDP / 2,2 / VVN / DC

Double head Diaphragm, valves, O-Ring

Flow [l/min]


P=ParallelR=Series


Vacuum


Pressure

-990 -800 -600 -400 -200 0 0,3 0,6 0,9 1,2 1,5 1,8 2,1 2,4 2,7

27,5

25,0

22,5

20,0

17,5

15,0

12,5

10,0

7,5

5,0

2,5

0

7011ZVDP DC7011ZVR DC

1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 16

17


Dra

win

g 13

356

Inch

es a

re s

how

n in

( )

Electrical DataMotor type Capacitor CapacitorNominal voltage 230 V/50 Hz 230 V/50 HzNominal speed 2700 rpm 2700 rpmCurrent consumption 0,38 A 0,38 AStarting current 0,5 A 0,5 APower consumption 67 W 67 WMotor insulation class B BProtection class IP00 IP00


Flow 16,0 l/min



Pneumatic DataDescription 7011ZVDP/2,2/NVN/AC 7011ZVR/2,2/VVN/ACPart number 230 V/50 Hz 70110333 70110086Max. flow 16,0 l/min 6,2 l/minMax. intermittent duty 2,2 barMax. continuous pressure 1,0 barMax. restart pressure Ambient pressure*Max. vacuum -730 mbar 40 mbar abs.Max. continuous vacuum -730 mbar 40 mbar abs.Max. restart vacuum Ambient pressure* 40 mbar abs.

Flow Curves



– Indicate inlet/outlet ports * Console positionwhen ordering

Standard port: – “CB”Standard console position: * “A”

The indicated shock absorbers are not includedin delivery

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,4 0,8 1,2 1,6 2,0

17,5

15,0

12,5

10,0

7,5

5,0

2,5

0

Flow [l/min]


7011ZVDP AC7011ZVR AC

�

Model key:

7011ZVDP / 2,2 / NVN / AC

Double head Diaphragm, valves, O-Ring

P=ParallelR=Series


Vacuum


Pressure

1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 17

18


Dra

win

g 13

316-

AIn

ches

are

sho

wn

in (

)

Electrical DataMotor type Direct current Direct current Nominal voltage 12/24 V DC 12/24 V DCNominal speed 2800 rpm 2800 rpmCurrent consumption 2,2/0,91 A 2,2/0,91 AStarting current 8,7/5,3 A 8,7/5,3 APower consumption 27 W 27 WMotor insulation class E EProtection class IP00 IP00

General DataAmbient temperature 15 to 40 °C 15 to 40 °C Media temperature 15 to 60 °C 15 to 60 °C Weight 1,1 kg 1,1 kg Port direction D D

Flow 14,0 l/min



Pneumatic DataDescription 7015VD/2,5/V/DC 7015VD/2,5/V/DCPart number 12 V DC 70152005

24 V DC 70152006(1)

Max. flow 14,0 l/min 14,0 l/minMax. intermittent duty 2,5 bar 2,5 barMax. continuous pressure 1 bar 1 barMax. restart pressure Ambient pressure* Ambient pressure*Max. vacuum -800 mbar -800 mbarMax. continuous vacuum -800 mbar -800 mbarMax. restart vacuum -800 mbar -800 mbar

Flow Curves


(1) restart with vacuum.* Part numbers change when restart is required with vacuum or pressure.



-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

15

10

5

0

Flow [l/min]


7015 DC

�

Model key:

7015VD / 2,5 / V / DC



Vacuum


Pressure

1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 18

19


Model key:

7015VD / 2,5 / EVV / AC



Vacuum


Pressure

Dra

win

g 13

538

Inch

es a

re s

how

n in

( )

Flow 14,4 l/min



Pneumatic DataDescription 7015VD/2,5/EVV/ACPart number 230 V/50 Hz 70150022(1)

Max. flow 12,0 l/minMax. intermittent duty 2,5 barMax. continuous pressure 1,2 barMax. restart pressure Ambient pressure*Max. vacuum -800 mbarMax. continuous vacuum -800 mbarMax. restart vacuum -800 mbar

Electrical DataMotor type Shaded pole/Capacitor(1)

Nominal voltage 230 V/50 HzNominal speed 2400 rpmCurrent consumption 0,56/0,38 AStarting current 0,6 APower consumption 80 WMotor insulation class E/BProtection class IP00

General DataAmbient temperature 15 to 40 °C Media temperature 15 to 40 °C Weight 1,8/2,0 kgPort direction A(1) for pressures over 1,5 bar capacitor motors are necessary.* Part numbers change when restart is required with vacuum or pressure.

Flow Curves




Flow [l/min]


�

-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

15

10

5

0

7015 AC 230 V/50 Hz

�

1735_17000066_en:1735_17000066_en 08.09.2006 13:32 Uhr Seite 19

20


Dra

win

g 13

320-

AIn

ches

are

sho

wn

in (

)




Flow 27,0 l/min



Pneumatic DataDescription 7015ZVDP/2,5/V/DC 7015ZVR/2,5/V/DCPart number 12 V DC 70152009 70152015

24 V DC 70152010 70152016Max. flow 27,0 l/min 12,0 l/minMax. intermittent duty 3,0 barMax. continuous pressure 1,0 barMax. restart pressure Ambient pressure*Max. vacuum -800 mbar -920 mbarMax. continuous vacuum -800 mbar -920 mbarMax. restart vacuum -800 mbar -920 mbar

Flow Curves




Flow [l/min]



Model key:

7015ZVDP / 2,5 / V / DC

Double head


P=ParallelR=Series


VacuumPressure

-1000 -900 -800 -700 -600 -500 -400 -300 -200 -100 0 1,0 2,0 3,0 4,0

30

25

20

15

10

5

0

7015 ZVDP DC7015 ZVR DC

1735_17000066_en:1735_17000066_en 08.09.2006 13:33 Uhr Seite 20

21



Model key:

7015ZVDP / 2,5 / V / AC

Double head


P=ParallelR=Series


VacuumPressure

Dra

win

g 13

585

Inch

es a

re s

how

n in

( )

Flow 22,0 l/min



Pneumatic DataDescription 7015ZVDP/2,5/V/AC 7015ZVR/2,5/EVV/ACPart number 230 V/50 Hz 70152008 70150132Max. flow 22,0 l/min 12,0 l/minMax. intermittent duty 2,5 barMax. continuous pressure 1,0 barMax. restart pressure Ambient pressure*Max. vacuum -800 mbar -900 mbarMax. continuous vacuum -800 mbar -900 mbarMax. restart vacuum Ambient pressure* -900 mbar

Electrical DataMotor type Capacitor CapacitorNominal voltage 230 V/50 Hz 230 V/50 Hz Nominal speed 2700 rpm 2700 rpmCurrent consumption 0,38 A 0,38 AStarting current 0,5 A 0,5 APower consumption 67 W 67 WMotor insulation class B BProtection class IP00 IP00


Flow Curves





-900 -800 -700 -600 -500 -400 -300 -200 -100 0 0,5 1,0 1,5 2,0 2,5

25

20

15

10

5

0

Flow [l/min]


7015ZP AC7015ZR AC

�

1735_17000066_en:1735_17000066_en 08.09.2006 13:33 Uhr Seite 21

22

References

Material choice for 7010 / 7011 / 7015 single and double head

Abbreviation Air Air Ozone Gases Alcohols Temperature limitsDiaphragm, valves, O-Rings inert gases aggressive Humid aggressive gas °CNBR (Perbunan®) N + 0 – – – -10/+90EPDM E + +/0 + +/0 +/0 -20/+90FKM/FPM (Viton®) V + + 0 +/0 –/0 +15/200FFKM/FFPM (Simriz®, Kalrez®) K + + + + + 200PTFE (Teflon®) P + + + + + 250

Pump chamber, Pump head, Fixating plate (Diaphragm plate)Polyarylamide (IXEF®) + 0 0 0 + 130PVDF + + + + + 90PVC + + + + + 80PA (Durethane®) + 0 – 0 0 90PPS (Ryton®) + + + + + 160Stainless steel 1.4571 VA + + + 0 +Aluminium (7015) + 0/– + – +

Exact data can be obtained on request. We recommend tests with materials in case of critical or unclear applications.

+= good0 = critical, tests necessary–= bad to instable

Voltages:Pumps with alternating current shaded pole motors can be delivered with 24V to 240V.

AAbbreviations:“P” = Parallel connections of several single heads“R” = Serial connections of several single heads“V” = Vacuum restart“D” = Pressure restart“Z” = Double head version (Note: type 7011 already has two heads, therefore type 7011Z is a 4 – headed pump)

AAdditional descriptions:The additives ”D” and ”V” are only relevant for the restart against pressure/vacuum.Every version can build pressure and vacuum restart against atmospheric pressure.

1735_17000066_en:1735_17000066_en 08.09.2006 13:33 Uhr Seite 22

23

Notes

1735_17000066_en:1735_17000066_en 08.09.2006 13:33 Uhr Seite 23

Printed in Germany.Art.-Nr.: 17000066 08/2006

Gardner Denver Thomas GmbHSiemensstraße 4 · Gewerbegebiet Nord · D-82178 PuchheimPhone: +49 89 80900-0 · Fax: +49 89 808368e-Mail: [email protected] · http://www.gd-thomas.com

diaphragm pumps - 동방하이테크를 찾아주셔서 감사합니다. diaphragm pump 7006 ac...

Documents