AgieCharmilles Wire EDM’s & System 3R tooling
Machine table layout
2
CONTENTS, AgieCharmilles:
ACT Spark CA20, horizontal clamping ........................................................................ page 4ACT Spark Xenon 239-495, horizontal clamping ......................................................... page 5 AgieCharmilles CUT 20, horizontal clamping .............................................................. page 6AgieCharmilles CUT 20, horizontal clamping .............................................................. page 7AgieCharmilles CUT 20, horizontal clamping .............................................................. page 8AgieCharmilles CUT 20, horizontal clamping .............................................................. page 9AgieCharmilles CUT 20, vertical clamping ................................................................ page 10AgieCharmilles CUT 30, horizontal clamping ............................................................ page 11AgieCharmilles CUT 30, horizontal clamping ............................................................ page 12AgieCharmilles CUT 30, vertical clamping ................................................................ page 13AgieCharmilles CUT 200, horizontal clamping .......................................................... page 14AgieCharmilles CUT 200, vertical clamping .............................................................. page 15AgieCharmilles CUT 300, vertical clamping .............................................................. page 16AgieCharmilles CUT 400, horizontal clamping .......................................................... page 17AgieCharmilles CUT 400, with 3P ............................................................................. page 18AgieCharmilles CUT 1000, horizontal clamping ........................................................ page 19AgieCharmilles CUT 2000, vertical clamping ............................................................ page 20AgieCharmilles CUT 2000, horizontal clamping ........................................................ page 21AgieCharmilles CUT 3000, horizontal clamping ........................................................ page 22AgieCharmilles CUT 3000, vertical clamping ............................................................ page 23AgieCharmilles CUT 3000, with other tooling ............................................................ page 24AgieCut 1XX (Oct. 93-), horizontal clamping ............................................................. page 25AgieCut 1XX (Oct. 93-), vertical clamping ................................................................. page 26AgieCut 1XX (Oct. 93-), vertical clamping ................................................................. page 27AgieCut 2XX (Oct. 93-), horizontal clamping ............................................................. page 28AgieCut 2XX (Oct. 93-), vertical clamping ................................................................. page 29AgieCut 2XX (Oct. 93-), vertical clamping ................................................................. page 30AgieCut 3XX (July 94-), vertical clamping .................................................................. page 31AgieCut Challenge 2 & Exellence 2, horizontal clamping ........................................... page 32AgieCut Challenge 3 & Exellence 3, horizontal clamping ........................................... page 33AgieCut Challenge 3 & Exellence 3, horizontal clamping ........................................... page 34AgieCut Classic 2, horizontal clamping ..................................................................... page 35AgieCut Classic 3, horizontal clamping ..................................................................... page 36AgieCut Evolution 2, Challange 2, Excellence 2, Progress 2 & Celebration 2, ............................. horizontal clamping ................................................................................................. page 37AgieCut Evolution 3, Challange 3, Excellence 3, horizontal clamping ......................... page 38AgieCut Evolution 3, Challange 3, Excellence 3, vertical clamping .............................. page 39AgieCut Progress 3, horizontal clamping ................................................................... page 40AgieCut Progress 3, vertical clamping ....................................................................... page 41AgieCut Progress 4, horizontal clamping ................................................................... page 42AgieCut Progress 4, vertical clamping ....................................................................... page 43Agie Attak, horizontal clamping ................................................................................ page 44Charmilles Robofil 190 (99-), horizontal clamping ..................................................... page 45Charmilles Robofil 230 FI (99-), horizontal clamping ................................................. page 46Charmilles Robofil 230/240 FI (00-), horizontal clamping .......................................... page 47Charmilles Robofil 240/240 sI, vertical clamping ....................................................... page 48Charmilles Robofil 240, vertical clamping ................................................................. page 49Charmilles Robofil 240, horizontal clamping ............................................................. page 50
3
CONTENTS, AgieCharmilles:
Charmilles Robofil 240, horizontal clamping ............................................................. page 51Charmilles Robofil 240, horizontal clamping ............................................................. page 52Charmilles Robofil 300/310 (-1993), horizontal clamping ......................................... page 53Charmilles Robofil 300/310 (-1993), horizontal clamping ......................................... page 54Charmilles Robofil 300/310 (-1993), horizontal clamping ......................................... page 55Charmilles Robofil 300/310/290 (1995-03-), horizontal clamping ............................. page 56Charmilles Robofil 380, horizontal clamping ............................................................. page 57Charmilles Robofil 390 (01-), vertical clamping ......................................................... page 58Charmilles Robofil 390 (01-), horizontal clamping ..................................................... page 59Charmilles Robofil 430/440 FI (01), vertical clamping ............................................... page 60Charmilles Robofil 430/440 FI (01), horizontal clamping ........................................... page 61Charmilles Robofil 500/510 (-1995), horizontal clamping ......................................... page 62Charmilles Robofil 500/510/F (1995-07-), horizontal clamping ................................. page 63Charmilles Robofil 640, vertical clamping ................................................................. page 64Charmilles Robofil 640, horizontal clamping ............................................................. page 65Charmilles Robofil 690 (01-), horizontal clamping ..................................................... page 66Charmilles Robofil 690 (01-), vertical clamping ......................................................... page 67Charmilles Robofil 2050, horizontal clamping ........................................................... page 68Charmilles Robofil 6040/6050, vertical clamping ...................................................... page 69Charmilles Robofil 6050, horizontal clamping ........................................................... page 70Charmilles Robofil 6050, vertical clamping ............................................................... page 71Charmilles Robofil 6050, vertical clamping ............................................................... page 72AgieCharmilles FI240, horizontal clamping ............................................................... page 73AgieCharmilles FI240, horizontal clamping ............................................................... page 74AgieCharmilles FI440, horizontal clamping ............................................................... page 75AgieCharmilles FI440, vertical clamping ................................................................... page 76AgieCharmilles FI640, vertical clamping ................................................................... page 77
4
MIC 2720 2007 08
ACTSpark CA20 Subject to modifications
2X 3R-200.3J-2
3R-239-420
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516Sweden
5
3R Concept WEDMing in ACTSPARK XENON
MIC-2396 2001-10 Subject to modifications.
3R-200.5J-STD Elément de référence 382 mm,distance des trous 25 mm, (distancedu bord de la table 40 mm).
3R-239-495 3Règle 495x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.5J-STD Base a coda di rondine 382 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 40 mm).
3R-239-495 3Riga 495x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.5J-STD Reference element 382 mm,pitch 25 mm, (40 mm from the
table edge).
3R-239-495 3Ruler 495x60x30 mm, completewith holders, supports andclamping details.
3R-239-495 3R Lineal 495x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
2x3R-239-495
2x3R-200.5J-STD
(4x16253-00 must be ordered additionally)
3R-200.5J-STD Referenz Element 382 mm,Lochabstand 25 mm, (40 mmvon der Tischkante).
6
MIC 2702 2007 08
CUT 20 Subject to modifications
3R-239-415
2x3R-200.3j-1
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516Sweden
7
MIC2703 2008 06
System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com
3R-209B
AgieCharmilles CUT 20
8
MIC2705 2008 06
System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com
2x3R-209B
AgieCharmilles CUT 20
2x3R-261.1
9
MIC2704 2008 06
System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com
2x3R-209B
AgieCharmilles CUT 20
2xThreaded rod M10x400
10
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2706 AC CUT 20Date: 2010-10-19Reference elements: 3R-200.3J-13Ruler: 3R-239-315
11
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
Agie Charmilles CUT30 Horizontal3R-200.47J-2 (Note one reference element turns 180°)3R-239-675.86 RulerActive Workspace X=622, Y=374
1:5SCALE
12
MIC2611 2009 03
System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com
AgieCharmilles CUT30
3R-209C
13
MIC2612 2009 03
System 3R International AB Tel: +46 8 620 20 00 Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 Sweden www.system3r.com
3R-200.5j-2 (2 pcs)*
AgieCharmilles CUT 30
3R-239-495
* One reference element is turned 180 degrees from its normal orientation.
14
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
Agie Charmilles CUT 200 Horizontal3R-200.3J-2 Reference elements3R-239-435 RulerWorking area 350 x 220
11:50SCALE
15
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
Agie Charmilles CUT200 Vertical3R-200.3J-2 Reference elements (turn one ref. 180°)3R-239-295 RulerWorkspace X=292,5 _ Y=220, lost in X=57,5 mm.
11:50SCALE
16
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
Agie Charmilles CUT300 Vertical3R-200.6J-1 Reference elements3R-239-415 RulerWorking space 488 x 350
11:50SCALE
17
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
Agie Charmilles CUT400Reference element 3R-200.6J-1Ruler 3R-239-865.86Workspace X=800, Y=550 with this X=800, Y=471,5
4:25SCALE
18
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
Agie Charmilles CUT400 former Rfi640 with 3P3R-200.6J-1 Reference elements (Vertical x 2)3R-200.4J-1 Reference elements (2 x Horizontal)3R-200.3J-1 Reference elements (2 x Horizontal)Holder 3P-set 3R-218S
3:20SCALE
19
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
AgieCharmilles CUT 1000 Horizontal3R-239-275 Ruler 3R-200.4J-STD Reference elements
3:10SCALE
20
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
AgieCharmilles CUT2000 Vertical clamping3R-200.5J-71 Reference elements3R-239-330 RulerWorking area 350 x 250
1:4SCALE
21
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
AgieCharmilles CUT2000 Horizontal3R-200.4J-71 Reference elements3R-239-435 RulerWorking Area 350 x 250
1:4SCALE
22
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
AgieCharmilles CUT3000 Horizontal clamping3R-200.6J-STD Reference elements (x2)3R-239-575 RulerWorking area 550 x 400 mm
1:4SCALE
23
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
AgieCharmilles CUT3000 Vertical clamping3R-200.5J-2 Reference elements (x2)3R-239-435 RulerWorking area 550 x 400 current working area due to ruler 505 x 400
1:4SCALE
24
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
AgieCharmilles CUT3000 with some examples of tooling3R-200.6J-STD Reference elements (x2)3R-272HP Levelling adapter (x2)3R-292.6S SuperVice Magnum linke seite3R-292.3 SuperVice rechts
1:4SCALE
25
MIC-2297 94-01 Subject to modifications.
3R Concept WEDMing in AGIECUT 1XX OCT 93-
3R-200.3J-STDx2
3R-239-435
3R-200.5J-STD
Fron
t
3R-200.3J-STD Elément de référence 345 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-200.5J-STD Elément de référence 382 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-239-435 3Règle 435x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.3J-STD Base a coda di rondine 345 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-200.5J-STD Base a coda di rondine 382 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-239-435 3Riga 435x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.3J-STD Reference element 345 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-200.5J-STD Reference element 382 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-239-435 3Ruler 435x60x30 mm, completewith holders, supports andclamping details.
3R-200.5J-STD Referenz Element 382 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
3R-239-435 3R Lineal 435x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.3J-STD Referenz Element 345 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
26
3R Concept WEDMing in AGIECUT 1XX OCT 93-
MIC-2388 94-01 Subject to modifications.
Adapter plates from Agie 180° turned
2x3R-239-435
3R-239.1
3R-200.3J-STD Reference element 345 mm, pitch25 mm (34.5 mm from the tableedge).
3R-239-435 3Ruler 435x60x30 mm, with 2holders, supports and clampingdetails.
3R-239.1 3Ruler viceFor further information seeprintings T-1143 and T-1125.
2x3R-200.3J-STD
Front
27
3R Concept WEDMingin AGIECUT 1XX OCT 93-
MIC-2300 94-01 Subject to modifications.
3R-200.5J-STD
Adapter plates from Agie 180° turned
3R-239-435
2x3R-200.3J-STD
Front
3R-200.3J-STD Elément de référence 345 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-200.5J-STD Elément de référence 382 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-239-435 3Règle 435x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.3J-STD Base a coda di rondine 345 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-200.5J-STD Base a coda di rondine 382 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-239-435 3Riga 435x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.3J-STD Reference element 345 mm,pitch 25 mm, (34.5 mm from the
table edge).
3R-200.5J-STD Reference element 382 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-239-435 3Ruler 435x60x30 mm, completewith holders, supports andclamping details.
3R-200.5J-STD Referenz Element 382 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
3R-239-435 3R Lineal 435x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.3J-STD Referenz Element 345 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
28
MIC-2296 94-01 Subject to modifications.
3R Concept WEDMing in AGIECUT 2XX OCT 93-
3R-239-535
3R-200.6J-STD
2x3R-200.5J-STD
Fron
t
3R-200.5J-STD Elément de référence 382 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-200.6J-STD Elément de référence 490 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-239-535 3Règle 535x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.5J-STD Base a coda di rondine 382 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-200.6J-STD Base a coda di rondine 490 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-239-535 3Riga 535x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.5J-STD Reference element 382 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-200.6J-STD Reference element 490 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-239-535 3Ruler 535x60x30 mm, completewith holders, supports andclamping details.
5
3R-200.6J-STD Referenz Element 490 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
3R-239-535 3R Lineal 535x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.5J-STD Referenz Element 382 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
29
MIC-2381 94-12 Subject to modifications.
3R Concept WEDMingin AGIECUT 2XX OCT 93-
3R-239-5353R-200.6J-STD
Adapter plates from Agie 180° turned
2x3R-200.3J-STD
Front
3R-200.3J-STD Elément de référence 345 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-200.6J-STD Elément de référence 490 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-239-535 3Règle 535x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.3J-STD Base a coda di rondine 345 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-200.6J-STD Base a coda di rondine 490 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-239-535 3Riga 535x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.3J-STD Reference element 345 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-200.6J-STD Reference element 490 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-239-535 3Ruler 535x60x30 mm, completewith holders, supports andclamping details.
3R-200.6J-STD Referenz Element 490 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
3R-239-535 3R Lineal 535x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.3J-STD Referenz Element 345 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
30
3R Concept WEDMing in AGIECUT 2XX OCT 93-
Adapter plates from Agie 180° turned
2x3R-239-535
3R-200.3J-STD Reference element 345 mm, pitch25 mm.
3R-239-535 3Ruler 535x60x30 mm, with 2holders, supports and clampingdetails.
3R-239.1 3Ruler vice
2x3R-200.3J-STD
3R-239.1
MIC-2389 94-04 Subject to modifications.
Front
31
MIC-2392 94-02 Subject to modifications.
3R Concept WEDMing in AGIECUT 3xx July 94-
3R-239-835
2x3R-200.7J-STD
AGIE plate 180° turned
AGIE plate 180° turned
2x3R-200.5J-STD
3R-200.5J-STD Elément de référence 382 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-200.7J-STD Elément de référence 570 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-239-835 3Règle 835x86x36 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.5J-STD Base a coda di rondine 382 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-200.7J-STD Base a coda di rondine 570 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-239-835 3Riga 835x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.5J-STD Reference element 382 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-200.7J-STD Reference element 570 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-239-835 3Ruler 835x86x36 mm, completewith holders, supports andclamping details.
3R-200.7J-STD Referenz Element 570 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
3R-239-835 3R Lineal 835x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.5J-STD Referenz Element 382 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
32
33
34
35
2x3R-200.5J-STD
3 R Concept WEDMing in AGIECUT CLASSIC 2
MIC-2335 97-06 Subject to modifications.
Additional suggested tooling:Weitere zu empfehlende Teile: 3R-239.1, .2, .3 = 3R-239.20, 3R-242S, 3R-242.82S, 3R-243.2,Equipement additionel conseillé: 3R-243J, 3R-261Attrezzatura supplementare consigliato:
2x3R-239-425
3R-200.5J-STD Reference element 382 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-239-425 3Ruler 425x60x30 mm, completewith holders, supports andclamping details.
Note: This machine table shape is a variant and must beordered from Agie.
3R-200.5J-STD Referenz Element 382 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
3R-239-425 3R Lineal 425x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
Achtung: Diese Tischausführung ist eine Variante undmuß bei Agie bestellt werden.
3R-200.5J-STD Base a coda di rondine 382 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-239-425 3Riga 425x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
Attenzione: Il tavolo macchina con queste caratteristiche éuna variante e deve essere ordinato presso Agie.
3R-200.5J-STD Elément de référence 382 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-239-425 3Règle 425x60x30 mm, règlecompléte avec butées,supports et details de serrage.
Note: Cette taille de la table de machine-outil est unevariante et doit être commandé chez la maison Agie.
Variant with clamping frame
36
MIC-2337 97-06 Subject to modifications.
3R Concept WEDMing in AGIECIECUT CLASSIC 3
Additional suggested tooling:Weitere zu empfehlende Teile:Equipement additionel conseillé:Attrezzatura supplementare consigliato:
3R-239.1, .2, .3 = 3R-239.20, 3R-242S, 3R-242.82S, 3R-243.2,3R-243.3J, 3R-261
2x3R-200.6J-STD
2x3R-239-575
3R-200.6J-STD Reference element 490 mm,pitch 25 mm.
3R-239-575 3Ruler 575x60x30 mm, completewith holders, supports andclamping details.
Note: This machine table shape is a variant and must beordered from Agie.
3R-200.6J-STD Referenz Element 490 mm,Lochabstand 25 mm.
3R-239-575 3R Lineal 575x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
Achtung: Diese Tischausführung ist eine Variante undmuß bei Agie bestellt werden.
3R-200.6J-STD Elément de référence 490 mm,distance des trous 25 mm.
3R-239-575 3Règle 575x60x30 mm, règlecompléte avec butées,supports et details de serrage.
Note: Cette taille de la table de machine-outil est unevariante et doit être commandé chez la maison Agie.
3R-200.6J-STD Base a coda di rondine 490 mmpasso dei fori 25 mm.
3R-239-575 3Riga 575x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
Attenzione: Il tavolo macchina con queste caratteristiche éuna variante e deve essere ordinato presso Agie.
Variant with clamping frame
37
3R Concept WEDMing in AGIECUT EVOLUTION 2
MIC-2394 99-10 Subject to modifications.
2x3R-239-425
2x3R-200.5J-STD
3R-200.5J-STD Reference element 382 mm,pitch 25 mm, (34.5 mm from thetable edge).
3R-239-425 3Ruler 425x60x30 mm, completewith holders, supports andclamping details.
3R-200.5J-STD Referenz Element 382 mm,Lochabstand 25 mm, (34.5 mmvon der Tischkante).
3R-239-425 3R Lineal 425x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.5J-STD Elément de référence 382 mm,distance des trous 25 mm, (distancedu bord de la table 34.5 mm).
3R-239-425 3Règle 425x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.5J-STD Base a coda di rondine 382 mmpasso dei fori 25 mm, (distanzadal bordo del tavolo 34.5 mm).
3R-239-425 3Riga 425x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
Additional suggested tooling:Weitere zu empfehlende Teile: 3R-239.1, .2, .3 = 3R-239.20, 3R-242S, 3R-242.82S, 3R-243.2,Equipement additionel conseillé: 3R-243J, 3R-261Attrezzatura supplementare consigliato:
Challenge 2, Excellence 2, Progress 2, (Celebration 2)
38
MIC-2330 99-10 Subject to modifications.
2x3R-239-575
2x3R-200.6J-STD
3R Concept WEDMing in AGIECIECUT EVOLUTION 3
3R-200.6J-STD Reference element 490 mm,pitch 25 mm.
3R-239-575 3Ruler 575x60x30 mm, completewith holders, supports andclamping details.
3R-200.6J-STD Referenz Element 490 mm,Lochabstand 25 mm.
3R-239-575 3R Lineal 575x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.6J-STD Elément de référence 490 mm,distance des trous 25 mm.
3R-239-575 3Règle 575x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.6J-STD Base a coda di rondine 490 mmpasso dei fori 25 mm.
3R-239-575 3Riga 575x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
Additional suggested tooling:Weitere zu empfehlende Teile:Equipement additionel conseillé:Attrezzatura supplementare consigliato:
3R-239.1, .2, .3 = 3R-239.20, 3R-242S, 3R-242.82S, 3R-243.2,3R-243J, 3R-261
Challenge 3, Excellence 3
39
MIC-2330-2 99-10 Subject to modifications.
3R Concept WEDMing in AGIECIECUT EVOLUTION 3
Challenge 3, Excellence 3
2x3R-239-425
3R-239-425D(U-30560)
3R-200.7J-STD Base a coda di rondine 570 mmpasso dei fori 25 mm.
3R-239-425 3Riga 425x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-239-425D Double sided ruler 425x60x30 mm
3R-200.7J-STD Elément de référence 570 mm,distance des trous 25 mm.
3R-239-425 3Règle 425x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-239-425D Double sided ruler 425x60x30 mm
3R-200.7J-STD Reference element 570 mm,pitch 25 mm.
3R-239-425 3Ruler 425x60x30 mm, completewith holders, supports andclamping details.
3R-239-425 Double sided ruler 425x60x30 mmDelivered as U-30560
3R-200.7J-STD Referenz Element 570 mm,Lochabstand 25 mm.
3R-239-425 3R Lineal 425x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-239-425D Doppelseitiges Lineal 425x60x30 mm
Gelifert als U-30560
2x3R-200.7J-STD
40
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
41
42
WEDMing with S3R
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
43
MIC 2458 2007 05
Agie Progress 4 Subject to modifications
K-30695(3R-239-625D)2 x 3R-200.5J-STD
2 x 3R-200.6J-STD
2 x K-30692(3R-239-625)
Note! There is only 1-2 mm between the back wall and the quick clamps that holds the ruler in place
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516Sweden
44
45
3R Concept WEDMing in CT RF 190 99-
MIC-2467 00-02 Subject to modifications.
3R-200.29J-7 Reference element 295 mm,pitch 50 mm, M6 (58 mm from thetable edge). (thin table edge),
3R-239-365 3Ruler 365x45x30 mm, completewith holders, supports andclamping details.
3R-200.29J-7 Referenz Element 295 mm,Lochabstand 50 mm, M6 (58 mmvon der Tischkante).(duenneTischkante),
3R-239-365 3R Lineal 365x45x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.29J-7 Elément de référence 295 mm,distance des trous 50 mm, M6(distance du bord de la table58 mm).
3R-239-365 3Règle 365x45x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.29J-7 Base a coda di rondine 295 mmpasso dei fori 50 mm, M6 (distanzadal bordo del tavolo 58 mm).
3R-239-365 3Riga 365x45x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
2x3R-239-365
2x3R-200.29J-7
46
3R Concept WEDMing in CT RF 230 FI 99-
MIC-2470 00-03 Subject to modifications.
Reference elements turned 180° text System 3R readable from outside of the machine, NOTE use 3R-239-435
3R-239-385
2x3R-200.2J-1
3R-200.3J-1
3R-200.2J-1 Reference element 209 mm,pitch 50 mm, (25 mm from thetable edge).
3R-200.3J-1 Reference element 345 mm,pitch 50 mm, (25 mm from thetable edge).
3R-239-385 3Ruler 385x60x30 mm, completewith holders, supports andclamping details.
3R-200.2J-1 Referenz Element 209 mm,Lochabstand 50 mm, (25 mmvon der Tischkante).
3R-200.3J-1 Referenz Element 345 mm,Lochabstand 50 mm, (25 mmvon der Tischkante).
3R-239-385 3R Lineal 385x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.2J-1 Base a coda di rondine 209mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 25 mm).
3R-200.3J-1 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 25 mm).
3R-239-385 3Riga 385x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.2J-1 Elément de référence 209 mm,distance des trous 50 mm, (distancedu bord de la table 25 mm).
3R-200.3J-1 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 25 mm).
3R-239-385 3Règle 385x60x30 mm, règlecompléte avec butées,supports et details de serrage.
47
3R Concept WEDMing in CT RF 230/240 FI 00-
Reference elements turned 180° text System 3R readable from outside of the machine
3R-239-385 (3R-239-435)
2x3R-200.3J-1
3R-200.3J-1 Reference element 345 mm,pitch 50 mm, (40 mm from thetable edge).
3R-239-385 3Ruler 385x60x30 mm, completewith holders, supports andclamping details.
3R-200.3J-1 Referenz Element 345 mm,Lochabstand 50 mm, (40 mmvon der Tischkante).
3R-239-385 3R Lineal 385x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.3J-1 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 40 mm).
3R-239-385 3Règle 385x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.3J-1 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 40 mm).
3R-239-385 3Riga 385x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
MIC-2471 00-04 Subject to modifications.
3R-239-435 SHOULD be used using the second M8 row for 3R-200.3J-1 (x2) New table lay out from Serial number 920 053
48
WEDMing with S3R
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
MIC 2472
49
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden
WEDMing with S3R
50
51
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
Charmilles 240 Mic 2644 2006 12
Subject to modifications
52
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
Charmilles 240 Mic 2643 2006 12
Subject to modifications
53
3R-200.7J-7 x2
3R-239-455
CT Frame
3R-200.7J-7 3Reference element 310 mm (2 rows M6)pitch 35 mm.
3R-239-455 3Ruler delivered with 2 holders,supports and clamps.For further information seeflyer T-1125.
Note: The CT table/edge is only 7 mm thickin the front to the working areaWhen using 3R-239-455 note the inter-ference of 30 mm in to the workingarea
3R Concept WEDMing in CT Robofil 300 / 310 -1993
MIC-2169 93.03 Subject to modifications.
54
3R-239-455
MIC-2307 996-07 Subject to modifications.
3R Concept WEDMing in CT Robofil 300/310 1993-
3R-200.8J-7 Referenz Element 345 mm,Lochabstand 35 mm, M6.Doppelreihe.
3R-239-455 3R Lineal 455x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.8J-7 Base a coda di rondine 345 mmpasso dei fori 35 mm, M6.
3R-239-455 3Riga 455x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
2x3R-200.8J-7
3R-200.8J-7 Elément de référence 345 mm,distance des trous 35 mm, M6.
3R-239-455 3Règle 455x60x30 mm, règlecompléte avec butées, supports etdetails de serrage.
3R-200.8J-7 Reference element 345 mm,pitch 35 mm, M6. double row..
3R-239-455 3Ruler 455x60x30 mm, completewith holders, supports andclamping details.
55
3R-200.8J-7x2
MIC-2307-1 92.11 Subject to modifications.
3R Concept WEDMingin CT Robofil 300 / 310 1993-
CT ruler
56
MIC-2369 96-05 Subject to modifications.
3R-200.12J-7
3R-239-520
2x3R-200.11J-7
3R Concept WEDMingin CT 300/310/290 1995-03-
3R-200.11J-7 Reference element 345 mm,pitch 50 mm.
3R-200.12J-7 Reference element 500 mm,
pitch 50 mm.
3R-239-520 3Ruler 520x60x30 mm, completewith holders, supports andclamping details.
3R-200.11J-7 Referenz Element 345 mm,Lochabstand 50 mm.
3R-200.12J-7 Referenz Element 500 mm,Lochabstand 50 mm.
3R-239-520 3R Lineal 520x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.11J-7 Elément de référence 382 mm,distance des trous 50 mm.
3R-200.12J-7 Elément de référence 500 mm,distance des trous 50 mm.
3R-239-520 3Règle 520x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.11J-7 Base a coda di rondine 382 mmpasso dei fori 50 mm.
3R-200.12J-7 Base a coda di rondine 500 mmpasso dei fori 50 mm.
3R-239-520 3Riga 520x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
CT 304 table from March 1995.Note: The CT 304 table can not be taken off on the CT RF 290 machines.
57
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden
WEDMing with S3R
58
3R Concept WEDMing in CT RFi 390 01-
MIC-2476 01-06 Subject to modifications.
3R-200.44J-1 Reference element 445 mm,pitch 50 mm, (55 mm from the
table edge).
3R-239-420 3Ruler 420x60x30 mm, completewith holders, supports andclamping details.
3R-239-420 3R Lineal 420x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.44J-1 Referenz Element 445 mm,Lochabstand 50 mm, (55 mmvon der Tischkante).
3R-200.44J-1 Base a coda di rondine 445 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 55 mm).
3R-239-420 3Riga 420x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.44J-1 Elément de référence 445 mm,distance des trous 50 mm, (distancedu bord de la table 55 mm).
3R-239-420 3Règle 420x60x30 mm, règlecompléte avec butées,supports et details de serrage.
2x3R-200.44J-1
2x3R-239-420
59
3R Concept WEDMing in CT RFi 390 01-
MIC-2477 01-06 Subject to modifications.
2x3R-239-520
2x3R-200.44J-1
3R-200.44J-1 Reference element 445 mm,pitch 50 mm, (55 mm from the
table edge).
3R-239-520 3Ruler 520x60x30 mm, completewith holders, supports andclamping details.
3R-239-520 3R Lineal 520x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.44J-1 Referenz Element 445 mm,Lochabstand 50 mm, (55 mmvon der Tischkante).
3R-200.44J-1 Base a coda di rondine 445 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 55 mm).
3R-239-520 3Riga 520x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.44J-1 Elément de référence 445 mm,distance des trous 50 mm, (distancedu bord de la table 55 mm).
3R-239-520 3Règle 520x60x30 mm, règlecompléte avec butées,supports et details de serrage.
60
3R Concept WEDMing in CT RF 430/440 FI 01
MIC-2474 00-12 Subject to modifications.
2x3R-200.6J-1
3R-239-415
3R-200.44J-1
3R-200.44J-1 Elément de référence 445 mm,distance des trous 50 mm, (distancedu bord de la table 50 mm).
3R-200.6J-1 Elément de référence 545 mm,distance des trous 50 mm, (distancedu bord de la table 50 mm).
3R-239-415 3Règle 415x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.44J-1 Base a coda di rondine 445 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 50 mm).
3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 50 mm).
3R-239-415 3Riga 415x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.44J-1 Reference element 445 mm,pitch 50 mm, (50 mm from the
table edge).
3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (50 mm from thetable edge).
3R-239-415 3Ruler 415x60x30 mm, completewith holders, supports andclamping details.
3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (50 mmvon der Tischkante).
3R-239-415 3R Lineal 415x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.44J-1 Referenz Element 445 mm,Lochabstand 50 mm, (50 mmvon der Tischkante).
61
3R Concept WEDMing in CT RF 430/440 FI 01
MIC-2475 00-12 Subject to modifications.
3R-200.44J-1 Elément de référence 445 mm,distance des trous 50 mm, (distancedu bord de la table 50 mm).
3R-239-615 3Règle 615x60x30 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.44J-1 Base a coda di rondine 445 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 50 mm).
3R-239-615 3Riga 615x60x30 mm, completocon riscontri, supporti e dettaglidi fissaggio.
3R-200.44J-1 Reference element 445 mm,pitch 50 mm, (50 mm from thetable edge).
3R-239-615 3Ruler 615x60x30 mm, completewith holders, supports andclamping details.
2x3R-239-615
2x3R-200.44J-1
3R-200.44J-1 Referenz Element 445 mm,Lochabstand 50 mm, (50 mmvon der Tischkante).
3R-239-615 3R Lineal 615x60x30 mm,komplett mit Haltern, Anschlägenund Klemmteilen
62
3R Concept WEDMing in CT RF 500 / 510 -1995
MIC-2312 93.03 Subject to modifications.
3R-200.9J-7x2(U-30123)
Different alternatives available,
3R-200.9J-7 3Reference element 415 mm,pitch 35 mm (M6).(see U-30123).For use of 2D and 3D tooling only.3Rulers can not be used with3R-200.9J-7.
CT ruler
63
MIC-2376 95-05 Subject to modifications.
3R-239-820
3x3R-200.12J-7
3R-200.11J-7
3R Concept WEDMing in CT 500/510/ F 1995-07-
CT 504 table from July 1995, from serial number:CT RF 500 500 0051 - - - - -CT RF 510 550 261, -265, -266, -267, -269, -270, -272, -273 - - - - -CT RF 510 F 570 011, -014 - - - - -
3R-200.11J-7 Reference element 345 mm,pitch 50 mm.
3R-200.12J-7 Reference element 500 mm,
pitch 50 mm.
3R-239-820 3Ruler 820x86x36 mm, completewith holders, supports andclamping details.
3R-200.11J-7 Referenz Element 345 mm,Lochabstand 50 mm.
3R-200.12J-7 Referenz Element 500 mm,Lochabstand 50 mm.
3R-239-820 3R Lineal 820x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.11J-7 Elément de référence 382 mm,distance des trous 50 mm.
3R-200.12J-7 Elément de référence 500 mm,distance des trous 50 mm.
3R-239-820 3Règle 820x86x36 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.11J-7 Base a coda di rondine 382 mmpasso dei fori 50 mm.
3R-200.12J-7 Base a coda di rondine 500 mmpasso dei fori 50 mm.
3R-239-820 3Riga 820x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.
64
WEDMing with S3R
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
65
WEDMing with S3R
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
66
3R Concept WEDMing in CT RFi 690 01-
MIC-2480 01-06 Subject to modifications.
3R-200.3J-1 Reference element 345 mm,pitch 50 mm, (55 mm from thetable edge).
3R-200.4J-1 Reference element 395 mm,pitch 50 mm, (55 mm from thetable edge).
3R-239-915.86 3Ruler 915x86x36 mm, completewith holders, supports andclamping details.
3R-200.3J-1 Referenz Element 345 mm,Lochabstand 50 mm, (55 mmvon der Tischkante).
3R-200.4J-1 Referenz Element 395 mm,Lochabstand 50 mm, (55 mmvon der Tischkante).
3R-239-915.86 3R Lineal 915x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.3J-1 Elément de référence 345 mm,distance des trous 50 mm, (distancedu bord de la table 55 mm).
3R-200.4J-1 Elément de référence 395 mm,distance des trous 50 mm, (distancedu bord de la table 55 mm).
3R-239-915.86 3Règle 915x86x36 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.3J-1 Base a coda di rondine 345 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 55 mm).
3R-200.4J-1 Base a coda di rondine 395 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 55 mm).
3R-239-915.86 3Riga 915x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.
2x3R-200.4J-1
2x3R-200.3 J-1
2x3R-239-915.86
67
3R Concept WEDMing in CT RFi 690 01-
MIC-2480-1 01-06 Subject to modifications.
3R-200.4J-1 Reference element 395 mm,pitch 50 mm, (55 mm from thetable edge).
3R-200.6J-1 Reference element 545 mm,pitch 50 mm, (55 mm from thetable edge).
3R-239-730.86 3Ruler 730x86x36 mm, completewith holders, supports andclamping details.
3R-200.4J-1 Referenz Element 395 mm,Lochabstand 50 mm, (55 mmvon der Tischkante).
3R-200.6J-1 Referenz Element 545 mm,Lochabstand 50 mm, (55 mmvon der Tischkante).
3R-239-730.86 3R Lineal 730x86x36 mm,komplett mit Haltern, Anschlägenund Klemmteilen
3R-200.4J-1 Elément de référence 395 mm,distance des trous 50 mm, (distancedu bord de la table 55 mm).
3R-200.6J-1 Elément de référence 545 mm,distance des trous 50 mm, (distancedu bord de la table 55 mm).
3R-239-730.86 3Règle 730x86x36 mm, règlecompléte avec butées,supports et details de serrage.
3R-200.4J-1 Base a coda di rondine 395 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 55 mm).
3R-200.6J-1 Base a coda di rondine 545 mmpasso dei fori 50 mm, (distanzadal bordo del tavolo 55 mm).
3R-239-730.86 3Riga 730x86x36 mm, completocon riscontri, supporti e dettaglidi fissaggio.
2x3R-200.4J-1
2x3R-200.6J-1
2x3R-239-730.86
68
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden
WEDMing with S3R
69
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2657 CTRF6040/6050Date: 2010-05-20Ruler: 3R-209-610.1
70
WEDMing with S3R
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.comSorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.seSweden
71
WEDMing with S3R
System 3R International AB Tel: +46 8 620 20 00 homepage: www.system3r.com Sorterargatan 1, 162 50 Vällingby Fax: +46 8 384516 http://www.system3r.se Sweden
72
73
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2662 AC FI240Date: 2010-09-28EconoRuler kit: 3R-209-610.4
74
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2662 AC FI240Date: 2010-06-04Ruler: 3R-209-610.1
75
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2663 AC FI440Date: 2010-06-04Ruler: 3R-209-860.1
76
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2664 AC FI440Date: 2010-06-04Ruler: 3R-209-610.1Note: 5 mm overhang on either side.
77
system 3R
System 3R International ABSorterargatan 1, 162 50 VällingbySweden
Tel: +46 8 620 20 00Fax: +46 8 384516www.system3r.com
MIC2665 AC FI640Date: 2010-06-04Ruler: 3R-209-860.1Note: 30 mm overhang on either side.
ASIA
Far East, China & IndiaSystem 3R Far East Pte.Ltd.
Leong Huat Building, 01-01
tel +65-6289 4811fax +65-6289 3011e-mail: [email protected]
tel +86-21 6432 7927fax +86-21 6432 7928e-mail: [email protected]
tel +86-10 8225 1632fax +86-10 8225 1635
tel +86-769 8162 0628fax +86-769 8162 0638
tel +60-03 7877 4785fax +60-03 7877 5948
tel +886-02 2278 3126fax +886-02 2278 3108
Japan & KoreaSystem 3R Japan CO., Ltd.Kaki Building2-5-22, Suido, Bunkyo-ku
tel +81-03 5840-7383fax +81-03 5840-8723
tel +81-052 774 6250fax +81-052 774 6285
System 3R International AB
tel +46-08 620 20 00, fax +46-08 759 52 34, e-mail: [email protected], www.system3r.com
System 3R Europe GmbHWasserweg 19
tel +49 61 52 80 02 0fax +49 61 52 80 02 35e-mail: [email protected]
Czech Republic & SlovakiaSystem 3R CzechTiskarska 10/257
tel +420 234 054 224fax +420 234 054 225e-mail: [email protected]
France & PortugalSystem 3R France56 Boulevard de Courcerin
tel +33-01 60 95 90 80fax +33-01 60 37 88 16e-mail: [email protected]
Germany & BeNeLuxSystem 3R DeutschlandWasserweg 19
tel +49 61 52 80 02 0fax +49 61 52 80 02 35e-mail: [email protected]
Italy & SpainSystem 3R Italia
tel +39 02 92 38 821fax +39 02 92 11 23 19e-mail: [email protected]
ScandinaviaSystem 3R NordicSorterargatan 1
tel +46-08 620 20 00fax +46-08 759 52 34e-mail: [email protected]
Järfälla HärdverkstadElektronikhöjden 8
tel +46-08 580 125 50fax +46-08 580 126 55e-mail: [email protected]
Switzerland & AustriaSystem 3R Schweiz AGWilerstrasse 98
tel +41-071 394 13 50fax +41-071 394 13 60e-mail: [email protected]
TurkeySystem 3R Türkiye
tel +90-212 613 8062-8063fax +90-212 613 8069e-mail: [email protected]
United KingdomSystem 3R UK
Walsgrave Triangle Coventry, West Midlands
tel +44-02476 538653fax +44-02476 538695e-mail: [email protected]
AMERICAS
System 3R USA Inc.Headquarters & Technical Center915 Busse Road
tel +1 847 439 4888fax +1 847 439 5099e-mail: [email protected]
Canada & MImobile +1 519 870 8339fax +1 847 439 5099e-mail: [email protected]
AZ, CA, CO, ID, MT, NM, NV, OR, UT, WA, WY & Mexicomobile +1 714 299 4923fax +1 847 439 5099e-mail: [email protected]
IA, MN, ND, NE, SD & Western WImobile +1 612 963 6904fax +1 847 439 5099e-mail: [email protected]
AR, IN, KY, OH, TN, MO, KS, OK & Southern ILmoblie +1 317 694 7508fax +1 847 439 5099e-mail: [email protected]
AL, FL, GA, LA, MS, NC, SC & TXmobile +1 813 326 0125fax +1 847 439 5099e-mail: [email protected]
Nothern IL & Eastern WImobile +1 847 400 6073fax +1 847 439 5099e-mail: [email protected]
NJ, NY & PAmobile +1 201 248 3885fax +1 847 439 5099e-mail: [email protected]
CT, DC, DE, MA, MD, ME, NH, RI, VA, VT & WVmobile +1 201 214 7088fax +1 847 439 5099e-mail: [email protected]
www.system3r.com