Transcript
  • 8/13/2019 2G to 3G Cell Reselection1

    1/3

    2G to 3G Cell ReselectionKabeer Ahmed

    [email protected]

    July 10, 2012

    mailto:[email protected]:[email protected]
  • 8/13/2019 2G to 3G Cell Reselection1

    2/3

    Improved 2G to 3G Cell ReselectionFollowing criteria must be met for the 2G to 3G cell reselection:

    1. The UE shall monitor atleast 6 of non-serving neighbouring GSM

    cells and update the RLA_C for these along with the RLC_C of theserving cell.

    2. The UE can reselect another cell if the criterion below are satised:

    Q Rxlevmeas (neigh ) > Rxlev(serv ) + FDD _QOFFSET QQualmeas (neigh ) > = FDD _Qmin FDD _Qmin _OFFSET Q Rxlevmeas (neigh ) > = FDD _ RSCP _THRESHOLD

  • 8/13/2019 2G to 3G Cell Reselection1

    3/3

    Q Rxlevmeas is RSCP, Rxlev(serv ) is RLA_C, FDD _QOFFSET is from SY S _ INFO 2_QUATER / T ER .QQualmeas is EcNo, FDD _Qmin is from SYS _ INFO 2_QUATER / T ER , FDD _Qmin _OFFSET is broadcast on BCCH of the serving

    cell.

    FDD _ RSCP _THRESHOLD = FDD _ RSCPmin min((P_ MAX 21dBm ), 3db ) if F DD _ RSCPmin is broadcast on BCCH; else

    FDD _ RSCP _THRESHOLD = Q_ Rxlevmin + P _Compensation + 10db

    where:

    P _Compensation = max (UE _TXPWR_ MAX RACH P _ MAX , 0)db ; UE _TXPWR_ MAX RACH is sent on SIB3 & Q_ RxLevmin is

    broadcast on SIBs.

    3. Cell reselection shall not occur within 5 seconds after the MS hasreselected a GSM cell from UTRAN cell if GSM cell can be found.

    4. If more than one suitable cell is found in UTRAN, then UE shall selectone with greatest RSCP.


Top Related