3024 Acme Brick Plaza, Fort Worth TX 76109brick.com • (800) 792-1234
APPLICATIONSThick SeT MorTar SYSTeM
Thin SeT MorTar SYSTeM
Thick SeT MorTar SYSTeM
Modular Panel SYSTeM
Pre-caST Wall SYSTeM
Thick SeT MorTar Bed SYSTeM
thinBRIK
thinBRIK
thinBRIK thinBRIKMetal Lath
Metal Lath
Metal Lath
thinBRIK
thinBRIK & Adhesive
These are recommendations only for typical applications. Always follow the requirements of your local codes and manufacturers recommendations. For more information visit www.gobrick.com/docs/default-source/read-research-documents/technicalnotes/28c-thin-brick-veneer.pdf
BondingCoat
BondingCoat
BondingCoat
BondingCoat
Scratch Coat
Scratch Coat
Scratch Coat
Scratch Coat
Pre-Cast Concrete
Air & Vapor Barrier
Metal Wall Panel
Drainage Mat
Support Wall
Exterior Insulation
Pre-Cast orPoured Concrete
Exterior Sheathing
Concrete Block
Air & Vapor Barrier
Air & Vapor Barrier
Metal or Wood Stud
ExteriorSheathing
Drainage MatMetal or Wood Stud
Over Exterior Insulation
Over Concrete Wall
Over Stud Wall
Over Stud Wall
Over CMU Wall
Thick SeT
Thin SeT
Modular PanelS
Pre-caST PanelS
thinB
RIK -
Extru
ded
typi
cally
for c
omm
ercia
l use,
flex
ible a
pplic
ation
s
thinB
RIK -
Kerfed
Ext
rude
d
com
mer
cial u
se on
ly, em
bedd
ed in
pre
cast
conc
rete
TC Tile
typi
cally
for c
omm
ercia
l use,
flex
ible a
pplic
ation
s
thinB
RIK -
Sawn
for c
omm
ercia
l & re
siden
tial u
se, va
ries i
n thi
ckne
ss
3024 Acme Brick Plaza, Fort Worth TX 76109brick.com • (800) 792-1234
These are recommendations only for typical applications. Always follow the requirements of your local codes and manufacturers recommendations. For more information visit www.gobrick.com/docs/default-source/read-research-documents/technicalnotes/28c-thin-brick-veneer.pdf
thinBRIKSawn
thinBRIKExtruded
thinBRIKKerfed Extruded
TC Tile
Mortar: Type N or Latex-Modified
Mortar: Latex-Modified
Mortar: Type N or Latex-Modified
Panels & Adhesive: Per Panel Manufacturer
Instructions
Verify Brick System Requirements
Form Liner: Architectural Polymers,
Innovative Brick Systems LLC,
Advanced Formliners LLC
inSTallaTion MeThod
recoMMended
MaTerialS
SPecial
conSideraTionS
Follow mortar manufacturer’s instructions for
thickness of bond coat and other brick setting
requirements.
Follow mortar manufacturer’s instructions for
thickness of bond coat and other brick setting
requirements.
Check thin brick thickness tolerances for
panel system. In the absence of guidelines,
maximum tolderance of ±1/16th inch is recommended.
PCI complance may be required. In some
cases, PCI dimensional tolerances have been
waived when products meet all other testing
requirements.
