doors - titon inc · • the screws are supplied with the hinges, but are also separately available...
TRANSCRIPT
-
FACE FIXED DOOR HINGESK15.13
K15
DOORS
01.10.2020
Waregemstraat 5 - 9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com
-
CONTENTS
1. General ................................................................................ K15.13.03
2. 2-part hinge ......................................................................... K15.13.042.1. General, dimensions K15.13.042.2. Versions K15.13.04
3. 3-part hinge ........................................................................ K15.13.053.1. General, dimensions K15.13.053.2. Versions K15.13.05
4. Adjustments ........................................................................ K15.13.06
5. Special characteristics ....................................................... K15.13.075.1. Support pins K15.13.075.2. High security against burglary K15.13.07
6. Order tables hinges ............................................................ K15.13.086.1. 2-part hinges K15.13.086.2. 3-part hinges K15.13.086.3. Step height (xx) and colour code (..) K15.13.08
7. Fixing sets ........................................................................... K15.13.097.1. Withdirectfixing K15.13.097.2. With clamping plates for 2-part hinges K15.13.097.3. With clamping plates for 3-part hinges K15.13.09
8. Accessories.......................................................................... K15.13.108.1. Drilling jig K15.13.108.2. Security pin set K15.13.108.3. Hinge pins K15.13.108.4. End cap set K15.13.118.5. Hinge bushes K15.13.118.6. Height adjustment set K15.13.11
9. Application range ................................................................ K15.13.12
10. Installation and application example ................................ K15.13.1310.1. General K15.13.1310.2. Drilling operations K15.13.1410.3. Installation order 2-part hinge K15.13.1510.4. Installation order 3-part hinge K15.13.16
K15.13.02 HINGES AND SECURITY PINS
FACE FIXED DOOR HINGES
K15.13
-
1. General
Characteristics• Universal 2-part and 3-part door hinges for aluminium
doors.• The hinges combine high functionality, user-friendliness
and high security with an aesthetic design.• CertifiedinaccordancewithCE,KOMOandSKG.• Maximumventweight:120kg(2-part),160kg(3-part).
Advantages• Simple assembly with direct screwing or assembly with
clamping plates.• The door hinges are non-handed.• 3-dimensional adjustment with only 1 allen key after
installation of the door.• Support pins prevent the frame part and the vent part
dropping.• Clip-on cover caps which are also secured by a screw.• Higher security against burglary by a security pin when
the hinges are mounted externally.
Materials and finish• Cover caps, frame and vent parts in aluminium.• Hinge pin in hardened steel, zinc coated.• Maintenance-free high quality bushes in synthetic
material.• Fixing screws in treated steel or stainless steel.• Thefollowingfinishesareavailable:
- natural anodised .. .... .. 01 - white coated RAL 9016 .. .... .. 46 - colour coated .. .... .. 90 + RAL n° ....
• Morethan450RALcolours.• Anodisedinblack,bronzeorchampagne:onrequest.
HINGES AND SECURITY PINS K15.13.03
FACE FIXED DOOR HINGES
K15.13
-
2. 2-part hinge2.1. General, dimensions
• Vent weights up to 120 kg with 2 hinges.• InaccordancewithstandardEN1935:2002withCE-classification476014113.• SKG tested, 2 stars.
2.2. Versions
With direct screwing With clamping plates• Screws in treated steel or stainless steel.• Lengthscrews:60mmor76mm.
Drilling distance63 mm 78 mm 84 mm 99 mm
A 21 21 42 42B 42 57 42 57C 63 78 84 99D 95.5 110.5 115.5 130.5E 8 8 -14 -14F 14 14 14 14G 40 40 32 32
K15.13.04 HINGES AND SECURITY PINS
FACE FIXED DOOR HINGES
K15.13
-
3. 3-part hinge3.1. General, dimensions
• Vent weights up to 160 kg with 2 hinges.• InaccordancewithstandardEN1935:2002withCE-classification477014114.• SKG tested, 3 stars, on condition that 3 hinges are mounted on the door.
3.2. VersionsWith direct screwing With clamping plates
• Screws in treated steel or stainless steel.• Lengthscrews:60mmor76mm.
Note:With minimum 3 hinges on the door!
Drilling distance63 mm 78 mm 84 mm 99 mm
A 21 21 42 42B 42 57 42 57C 63 78 84 99D 95.5 110.5 115.5 130.5E 8 8 -14 -14F 14 14 14 14G 40 40 32 32
HINGES AND SECURITY PINS K15.13.05
FACE FIXED DOOR HINGES
K15.13
-
4. Adjustments
• Both the 2-part hinges and the 3-part hinges can be adjusted in 3 directions.
• The adjustments can be done by one person, on a mounted door, without unscrewing the hinges.
• All adjustments can be made accurately witha5mmallenkey.
• Steplessadjustments: - Heightadjustment:-1mm/+4mm - Horizontaladjustment:±3mm - Gasketpressureadjustment:±1.25mm
• Note:thegasketpressureadjustmentisspreadovertheframepartandtheventpart: - Framepart:-0.5/0/+0.5mm - Ventpart:-0.75/-0.25/+0.25/+0.75mm
• Thankstotheuniquehorizontaladjustmentthere’snovisibleoffset between frame and vent part of the hinge.
• Adjustment3-parthinge: Afteradjustingthegasketpressure,theeccentricbushintheventpartmustbekeptinitspositionbythepositioningpin(underneath the end cap). Alternatively, you can also use a 4 mmallenkey.Thenyouturnthevent,theaxisisfixedwiththe grub screw and the positioning pin is removed. Finally, the aluminiumcovercapisplacedandfixed.
Heig
ht a
djus
tmen
t
Horizontal adjustment
Gasketpre
ssure
adjust
ment
K15.13.06 HINGES AND SECURITY PINS
FACE FIXED DOOR HINGES
K15.13
-
5. Special characteristics5.1. Support pins
• Theventandframepartsareeachprovidedwith2supportpinswhichengageintotheprofile.
• Primarily these pins prevent the vent dropping, but they also provide a better positioning of the hinge when mounting.
5.2. High security against burglary• The hinges are SKGtestedandapproved:2-parthinge(2stars),3-parthinge(3stars).
• The aluminium cover caps are simply clipped and additionallysecuredbyhexagonsocketheadcapscrews. The screws are only accessible when the door is open.
• When mounting the hinges on the outside, it is possible to prevent access to the hexagon hole of the screws by security pin.
Frame part Vent part
HINGES AND SECURITY PINS K15.13.07
FACE FIXED DOOR HINGES
K15.13
-
6. Order tables hinges6.1. 2-part hinges
6.2. 3-part hinges
6.3. Step height (xx) and colour code (..)
• Thefollowingfinishesareavailable: - natural anodised .. .... .. 01 - white coated RAL 9016 .. .... .. 46 - colour coated .. .... .. 90 + RAL n° ....
• Morethan450RALcolours.
• Anodisedinblack,bronze,champaign:onrequest.
FixingDrilling distance
63 mmDrilling distance
78 mmDrilling distance
84 mmDrilling distance
99 mmscrews 60 mm 37 6160 xx .. 37 6360 xx .. 37 6560 xx .. 37 6760 xx ..
screws 60 mm inox 37 6161 xx .. 37 6361 xx .. 37 6561 xx .. 37 6761 xx ..
screws 76 mm 37 6176 xx .. 37 6376 xx .. 37 6576 xx .. 37 6776 xx ..
screws 76 mm inox 37 6177 xx .. 37 6377 xx .. 37 6577 xx .. 37 6777 xx ..
with clamping plates 37 6120 xx .. 37 6320 xx .. 37 6520 xx .. 37 6720 xx ..
withoutfixings 37 6100 xx .. 37 6300 xx .. 37 6500 xx .. 37 6700 xx ..
xx = code for step height (see below).. = colour code (see below)
FixingDrilling distance
63 mmDrilling distance
78 mmDrilling distance
84 mmDrilling distance
99 mmscrews 60 mm 37 5160 xx .. 37 5360 xx .. 37 5560 xx .. 37 5760 xx ..
screws 60 mm inox 37 5161 xx .. 37 5361 xx .. 37 5561 xx .. 37 5761 xx ..
screws 76 mm 37 5176 xx .. 37 5376 xx .. 37 5576 xx .. 37 5776 xx ..
screws 76 mm inox 37 5177 xx .. 37 5377 xx .. 37 5577 xx .. 37 5777 xx ..
with clamping plates 37 5120 xx .. 37 5320 xx .. 37 5520 xx .. 37 5720 xx ..
withoutfixings 37 5100 xx .. 37 5300 xx .. 37 5500 xx .. 37 5700 xx ..
xx = code for step height (see below).. = colour code (see below)
Profile step heightDistance A xx
0 mm 008 mm 089 mm 0910 mm 10
K15.13.08 HINGES AND SECURITY PINS
FACE FIXED DOOR HINGES
K15.13
-
7. Fixing sets7.1. With direct fixing
• Screwsfordirectfixingofthehinges.• Material:treatedsteelorstainlesssteel(inox).• Lengthscrews:60mmor76mm.• The screws are supplied with the hinges, but
are also separately available in sets.
7.2. With clamping plates for 2-part hinges
• 2 short clamping plates with spring leaf, 14 mm wide.• 4 screws of 30 mm or 40 mm in treated steel.• The clamping plates and screws are supplied with the
hinges, but are also separately available in sets.
7.3. With clamping plates for 3-part hinges
• 1 short clamping plate with spring leaf, 14 mm wide.
• 1 long clamping plate with spring leafs, 14 mm wide. This clamping plate is for the frame parts.
• 6 screws of 30 mm or 40 mm in treated steel.• The clamping plates and screws are supplied
with the hinges, but are also separately available in sets.
Stainless steel
Treated steel
Quantity Material Length L Set number4 Steel 60 mm 40 1160 94 554 Inox 60 mm 40 1160 94 004 Steel 76 mm 40 1176 96 554 Inox 76 mm 40 1176 96 006 Steel 60 mm 40 1160 95 556 Inox 60 mm 40 1160 95 006 Steel 76 mm 40 1176 97 556 Inox 76 mm 40 1176 97 00
Length L Set number
30 mm 79 0322 93 55
40 mm 79 0322 94 55
Length L Set number
30 mm 79 0323 93 55
40 mm 79 0323 94 55
HINGES AND SECURITY PINS K15.13.09
FACE FIXED DOOR HINGES
K15.13
-
8. Accessories8.1. Drilling jig
• Drilling jigs for 2-part and 3-part hinges.• Todrill thefixingholesandtheholesforthe
support pins.
• The drilling jigs are standard supplied with the requiredpositioningpieces:A=4,5or6mm.
8.2. Security pin set• One set contains 4 pins.• Especially for external installation.• The pin is hammered into the hexagonal hole ofthefixingscrewsandisthensnappedoff.
8.3. Hinge pins• Hinge pins in hardened steel, zinc coated.
Description Order codeJig with drilling distance 63 mm 01 0437 00 01Jig with drilling distance 78 mm 01 0441 00 01Jig with drilling distance 84 mm 01 0438 00 01Jig with drilling distance 99 mm 01 0442 00 01
Description Order codeSecurity pin set with 4 pieces 71 9027 90 00
Description Order codePin for 2-part hinge 71 9225 01 00Pin for 3-part hinge 71 9226 10 00
K15.13.10 HINGES AND SECURITY PINS
FACE FIXED DOOR HINGES
K15.13
-
8.4. End cap set• Blackclip-onendcapsinsyntheticmaterial:theseare
different for 2-part and 3-part hinges.
• Thescrewsforthefixingofthealuminiumcovercaps: - 2-parthinge:2pieces - 3-parthinge:3pieces
• Thefixingscrewforthehingepinofthe3-parthinge.
8.5. Hinge bushes• Eccentric bushinblacksynthetic material for2-parthinge:n° 75 92 82 00 64
• Eccentricbushinblacksyntheticmaterialfor3-parthinge:n° 75 92 83 00 64
• Bushinblacksyntheticmaterial:n° 75 92 81 10 64 - 2-parthinge:1piece - 3-parthinge:2pieces
8.6. Height adjustment set• Set n° 40 18 08 93 55
• Height adjustment piece.
• Restrictorpinforgasketpressureadjustment.
Description Order codeSet 2-part hinge 76S 50 53 92 64Set 3-part hinge 76S 50 64 90 64
Set for 2-part hinge Set for 3-part hinge
HINGES AND SECURITY PINS K15.13.11
FACE FIXED DOOR HINGES
K15.13
-
9. Application range
• Maximumventwidth=1250mm• Maximumventheight=2000mm/2300mm• Wallthickness=1.7mm• Screwinminimum2profilewalls• Whenusingasurfacemountedoverheaddoorcloser:*
• Positioning:seesketch - Distancebetweenventedgeandtoporbottomhinge:200mm - Distancebetweenthe2tophinges:300mm
Dwellings Public buildings (schools, hospitals, ...)Maximumventweight=120 kg (2-part) Maximumventweight=160 kg (3-part)
Fh=2000mm Fh=2300mm Fh=2000mm Fh=2300mm Fh=2000mm Fh=2300mm Fh=2000mm Fh=2300mm
* *
2x 3x 3x 4x 2x 3x 3x 4x
K15.13.12 HINGES AND SECURITY PINS
FACE FIXED DOOR HINGES
K15.13
-
10. Installation and application example10.1. General
With direct fixing
• Thenecessarydrillingholescanbemadeveryquicklyandaccuratelybyusingadrillingjig.
• Holes ø10 mm for the screws, holes ø6 mm for the support pins.
• The screws must be screwed in minimum 2 profile walls. The profile wall thickness must be at least 1.7 mm to have a good fixing.
• Mountthehingepartsontheprofileandfixthem.
• The support pins prevent the vent dropping, but they also provide a better positioning of the hinge when mounting.
With clamping plates
• Thenecessarydrillingholescanbemadeveryquicklyandaccuratelybyusingadrillingjig.
• Holes ø10 mm for the screws, holes ø6 mm for the support pins.
• Slideintheclampingplatesandpositiontheminfrontofthefixingholes.
• Mountthehingepartsontheprofileandfixthem.
• The support pins prevent the vent dropping, but they also provide a better positioning of the hinge when mounting.
HINGES AND SECURITY PINS K15.13.13
FACE FIXED DOOR HINGES
K15.13
-
10.2. Drilling operations
• Thisdrawingappliestobothdirectfixingandinstallationwithclampingplates.Note:thehorizontalpositionofthehingesmayvaryaccordingtotheprofile.
Onlyforthe3-part hinge
Drilling distance63 mm 78 mm
A 21 21B 42 57C 63 78E 8 8F 14 14
Onlyforthe3-part hinge
Drilling distance84 mm 99 mm
A 42 42B 42 57C 84 99E 14 14F 14 14
K15.13.14 HINGES AND SECURITY PINS
FACE FIXED DOOR HINGES
K15.13
-
10.3. Installation order 2-part hinge
Attention!Mount the end cap withthe clips at the top.
1
Top
2 3
4
5
7
8
Drill the holes Fix the frame partMount the frame bush andthe height adjustment piece
Mountaxisandventbush Adjustment (when necessary)
Fix the vent part
Option:mountsecuritypins
Mountthecoverandendcaps
6
Fix the cover caps
9
HINGES AND SECURITY PINS K15.13.15
FACE FIXED DOOR HINGES
K15.13
-
10.4. Installation order 3-part hinge
Drill the holes
2 3
4 5 6
7 8 9 10
Mountbothframebushesinthe same position Fix the frame parts
Mounttheaxisandtheventbushandfixtheventpart Adjustment (when necessary)
Fix the vent bush before adjustingthegasketpressure
Fix the axisOption: mount security pins Mountthecovercaps Fix the cover caps
1
Top
K15.13.16 HINGES AND SECURITY PINS
FACE FIXED DOOR HINGES
K15.13