donald duck[1]
TRANSCRIPT
8/11/2019 Donald Duck[1]
http://slidepdf.com/reader/full/donald-duck1 1/1
Materials:
260s royal blue - 1 pc
260s orange – 2 pcs
260s white – 3 pcs
260s black – 1 pc
260s red – 1 pc
360s black – 1pc
5” royal blue – 1pc
Donald DuckBy Balloon Artist: Glen Peh
Copyright © 2013. All rights reserved. No part of this publication may be reproduced in any form or by any means including electronic, photocopying, recording, or otherwise, without the prior consent from Balloon Baron Specialties. Donald/1
Inflate 5” blue to about 10cm
in diameter. Cut one third of
360s black and tie to the 5”
blue nozzle.
1 2
Apply apple twist and use the
remaining 360s black to tie as
shown. This is the hat.
3
Inflate 260s white and leave about
10cm at the back. Twist a 9cm
bubble, followed by a 3cm bubble
and a 9cm bubble.
Twist a 9cm bubble and weave
around the two 6cm loops.
4
Tie the hat in step 2 to the
3cm pinch in step 4.
5
Inflate 260s black to about 50cm long.
Loop around the space between the hat
and the 3cm pinch. Twist a 3cm bubble
and turn it into a pinch.
6
Inflate 260s blue and leave about
10cm at the back. Twist a 15cm
bubble followed by two 3cm bubbles.
Turn the 3cm bubbles into pinch.
7
Twist a 8cm bubble followed by
a 3cm bubble. Turn the 3cm
bubble into a pinch.
8
Twist another three 8cm
bubbles and weave around the
double pinch and pinch as
shown. End with a 9cm bubble.
9
Inflate 260s white and leave about
10cm at the back. Twist a 3cm
bubble and turn it into a pinch.
Twist a 15cm bubble and weave
around the 3cm pinch in s tep 10.
10
Twist a 15cm bubble and weave
around the 3cm pinch in s tep 12.
Twist a 10cm bubble and weave
around the 3cm pinch in s tep 10.
11
Turn the 3cm bubble in step 3 into a
pinch. Twist two 6cm loop as shown.
12 13 14 15
16 17 18 19
Twist a 20cm bubble and weave
around the 3cm bubble in step 12.
Cut and tie the remaining balloon.
Inflate 260s orange and leave about 10
cm at the back. Twist a 8cm bubble
followed by 3cm , 6cm, 3cm and 8cm
bubbles as shown.
Inflate a 3cm bubble and
turn it into a pinch.Twist a 10cm bubble followed by
a 3cm bubble. Turn the 3cm
bubble into a pinch.
Push the 260s orange into
the 20cm bubble in step 14
as shown.
Twist a 3cm bubble and turn it
into a pinch. Twist a 10cm
bubble and repeat step 15-16.
Inflate 260s white to about 50cm
long. Twist a 3cm bubble
followed by two 3cm bubbles.
Turn the 3cm bubbles into pinch.
Twist a 9cm bubble and
weave around the 3cm pinch.
20 21 22
Twist two 4cm bubbles and
turn them into lock. Cut and tie
the remaining balloons. Make
two sets. These are the gloves
Tie the two set of gloves as shown.
23 24 25
26
27 28
29
Inflate 260s red. Twist two
2cm bubbles and turn
them into pinch.
Twist two 4cm loop as shown.
Cut and tie remaining balloons.
This is the bow tie.
Attach the bow tie to the
double pinch in step 9.
Leave about 5cm for the neck.
Cut and tie 260s white. Attach
to the body as shown.
Inflate 260s orange and leave about 10cm at the back. Twist
four loop of size 15cm, 10cm, 8cm and 8cm. Adjust the
sculpture as shown in step 28. This is the duck beak.
Attach the beak as shown. Draw theeyes and buttons and you have
sculptured a Donald Duck!