doc 719 micro instruments cardiovascular surgery

8/13/2019 Doc 719 Micro Instruments Cardiovascular Surgery

http://slidepdf.com/reader/full/doc-719-micro-instruments-cardiovascular-surgery 1/60

Aesculap Surgical Instruments

Micro Instruments for Cardiac

and Vascular Surgery



In this catalog, we are presenting a fine range of microsurgical

instruments commonly used in cardiac and vascular surgery. It

includes a new line of lightweight, single-use microsurgical

scalpels with an innovative ergonomic handle design. Also

included are a select range of vascular clips, scissors, forceps

and needle holders produced using the latest technology toprovide outstanding functionality. The diamond dust (DIADUST)

coating or tungsten carbide (DUROGRIP) technology which we

use for our forceps and needle holders not only provides a safe

grip on tissue and suture material, but also ensures high wear

resistance in the instrument jaw.

Think Innovation. Think Aesculap.

The working surfaces of the jaws

of all DIADUST instruments are

coated with a fine layer of

diamond dust. Over 100 years of

experience has demonstrated to

us which materials to choose for

optimum performance. This

results in a hard surface with

high wear resistance. Moreover,

the structure of the DIADUST

coating provides a reliable grip

for fine needles and sutures, as

well as for tissue. Suitable for

4/0 to 10/0 sutures.

Aesculap DUROGRIP needle

holders have jaws with high

quality tungsten carbide inserts.

A smooth jaw surface as well as

a 0.2 mm micro serration

guarantee a safe hold on the

needle. We recommend carbide

inserts with a smooth jaw surface

for micro suture material

9/0 – 11/0 and inserts with a 0.2

mm pitch serration for suture

material 6/0 – 10/0.

DIADUST DUROGRIP



TABLE OF CONTENTS

Micro Scissors Page 6-11

DIADUST Micro Forceps Page 12-17

DIADUST Micro Needle Holders Page 18-29

Instruments for Shunt Operations 0-33

DUROGRIP Micro Needle Holders Page 34-43

STANDARD Micro Needle Holders Page 44-47

Scalpels & Scalpel Handles Page 48-49

Vessel Hooks and Clips Page 50-51

Care & Maintenance Page 52-53

Index Page 54-55

Cross Reference Page 56-59



Think Aesculap.

Think Partnership

Think Quality

Profound knowledge derives from appreciating the significance

of individual pieces of knowledge or experience and fitting

them together into a coherent network. A principle B. Braun has

been following consistently for more than 160 years, clearly

reflects our corporate claim: “Sharing Expertise.“ Sharing

knowledge across all company divisions creates a broad, solid

knowledge base for everyone involved. This results in detailedsolutions and maximum safety for the patient, nurse and

surgeon.

With over 130 years of experience in the surgical instrument

market, the Aesculap Division is a competent partner for this

interdisciplinary knowledge-sharing process.

The Aesculap brand intelligently and economically combines

high-quality products with process-oriented services. Aesculapis a reliable and accepted partner for the entire surgical process

in the hospital.

Aesculap owes its standing among the best in the business to

its employees, who, searching for the best possible solution, are

never satisfied with their initial idea, and repeatedly examine,

question and optimize every development.

Aesculap is more than a supplier of high-precision surgicalinstruments. It’s a partner who listens carefully and contributes

ideas, and understands your needs and requirements. From

products to services and seminars for all areas of activity within

the hospital, Aesculap is your source for surgical solutions.



Think Competence Think Service Think Innovation

Think Economy



165 mm, 6 1/2”

Micro Scissors with Flat Handle



Fine blade

45° 60° 90° 125°

Fine blade,with one probe pointed

blade

Delicate blade

straight curved on flat

Ultra delicate blade

FM470R FM471R FM472R FM473R FM474R


FM437R FM438R FM439R FM440R FM441R FM442R FM436R


25°

1/1

1/1

1/1

1/1



Micro Scissors with Round Handle

165 mm, 6 1/2”



Fine blade

25° 45° 60° 90° 125°

Delicate blade

straight curved on flat

Delicate blade,with one probe pointedblade





FM504R FM505R FM506R FM507R FM508R FM503R

1/1

1/1

1/1

1/1



Microvascular Scissors

180 mm, 7”



Standard blade

Delicate blade


BC522R BC523R BC524R BC525R BC526R



1/1

1/1

1/1

25° 45° 60° 90° 125°



Jaw diam. of ring:1 mm,straight

diam. of ring:1 mm,curved

diam. of ring:2 mm,straight

platform tips,straight

platform tips,curved

1 mm,DeBakey tip

FM570R

FM572R

FM574R

FM576R

FM596R

FM571R

FM573R

FM575R

FM577R

FM595R

FM579R

FM578R

FM580R

FM599R

FM594R

FM581R

FM583R

FM585R

FM593R

FM592R

FM600R

Total length (in.)

150 mm6”

185 mm

7 1/4”

210 mm

8 1/4”

230 mm9”

250 mm10”

1/1

DIADUST

The diamond dust coating ensures an even harderand more wear resistant surface on the inside ofthe jaws. The structure of the DIADUST coatingleads to a reliable grip for fine needles and sutures,as well as for tissue.

DIADUST Micro Forceps with Round Handle and Counter Balance



185 mm, 7 1/4”150 mm, 6” 210 mm, 8 1/4” 230 mm, 9” 250 mm, 10”



1/1

Jaw diam. of ring:1 mm,straight

diam. of ring:1 mm ,curved

diam. of ring:1 mm withplatform tip

platform tip,straight

1 mm,DeBakey tip

FM597R185 mm7 1/4”

FM598R210 mm

8 1/4”

FM587R

FM589R

FM582R

FM584R

FM586R

FM588R

FM590R

FM591R

Total length (in.)

DIADUST


DIADUST Micro Forceps with Round Handle without Counter Balance



185 mm, 7 1/4” 210 mm, 8 1/4”



Total length (in.)

1 mm,crossserrated

Jaw 1 mm,DeBakey tip

diam. of ring:1 mm,straight

BD190R180 mm

7”

BD197R250 mm

10”

BD191R

BD195R200 mm

8”

BD192R BD193R

1/1

diam. of ring:1 mm,curved

1 mm,straight

BD194R

BD196R

DIADUST


DIADUST Micro Forceps with Flat Handle

Cushing DUROGRIP forcepsSTR. 210 mm, 8 1/4”

BD198R

BD200R

BD201R Thumb DIADUST forceps1 mm STR. 210 mm, 8 1/4”

Thumb DIADUST forceps1 mm STR. 180 mm, 7”

Also offered

*No images available



180 mm, 7” 200 mm, 8” 250 mm, 10”



with catch

Suture size

7/0 and smaller 5/0 and smaller 4/0 and smaller

1/1

4/0 and smaller

FM520R120 mm4 3/4”

FM521R160 mm6 1/4”

FM563R185 mm7 1/4”

FM565R210 mm8 1/4”

FM567R230 mm9”

FM522R145 mm5 3/4”

FM523R

FM564R

FM566R

FM568R

FM218R

FM230R FM223R

FM221R

Total length (in.)

1/1

FM228R

1/1 1/1

without catch 7/0 and smaller 5/0 and smaller

FM524R120 mm4 3/4”

FM525R160 mm6 1/4”

FM526R185 mm7 1/4”

FM527R210 mm8 1/4”

FM532R230 mm9”

FM528R145 mm5 3/4”

FM529R

FM530R

FM531R

FM533R

Total length (in.)

DIADUST Micro Needle Holders with Round Handle



120 mm, 4 3/4” 145 mm, 5 3/4” 160 mm, 6 1/4” 185 mm, 7 1/4” 210 mm, 8 1/4” 230 mm, 9”

DIADUST

The diamond dust coating ensures an even harderand more wear resistant surface on the inside ofthe jaws. The structure of the DIADUST coatingleads to a reliable grip for fine needles andsutures, as well as for tissue.



Suture size

FM538R

FM539R

FM534R

FM535R

190 mm

7 1/2”

FM536R

230 mm

9”

FM537R

250 mm

10”

1/1

190 mm

7 1/2”

230 mm

9”

250 mm

10”

1/1

with catch,heavy style

without catch,heavy style

2/0 and smallerTotal length (in.)

Suture size

2/0 and smallerTotal length (in.)

DIADUST


DIADUST Micro Needle Holders with Round Handle



190 mm, 7 1/2” 250 mm, 10”230 mm, 9”



FM545R

FM546R

FM547R

FM548R

FM549R

with catch

without catch 7/0 and smaller 5/0 and smaller

Suture size

7/0 and smaller 5/0 and smaller

FM540R

FM541R

FM542R

FM543R

FM544R

170 mm

145 mm5 3/4”

185 mm7 1/4”

210 mm8 1/4”

230 mm9”

6 3/4”

Total length (in.)

170 mm

145 mm

53

/4”

185 mm7 1/4”

210 mm8 1/4”

230 mm9”

6 3/4”

Total length (in.)

1/1 1/1

DIADUST Micro Needle Holders with Flat Handle



170 mm, 6 3/4”145 mm, 5 3/4” 185 mm, 7 1/4” 210 mm, 8 1/4” 230 mm, 9”


DIADUST



with catch

Suture size

5/0 and smaller

FM550R185 mm7 1/4”

FM551R210 mm8 1/4”

FM552R230 mm9”

Total length (in.)

1/1

without catch

Suture size

5/0 and smaller

FM553R185 mm7 1/4”

FM554R210 mm8 1/4”

FM555R230 mm9”

Total length (in.)

1/1

DIADUST


DIADUST Micro Needle Holders with Flat Knurled Handle



185 mm, 7 1/4” 210 mm, 8 1/4” 230 mm, 9”



GLASSER

FM560R

Suture size: 5/0 and smaller

125 mm, 5”

GLASSER

FM561R

Suture size: 5/0 and smaller

180 mm, 7”

1/1

1/1DIADUST


DIADUST Micro Needle Holders



FM236R

with catchSuture size: 5/0 and smaller210 mm, 8 1/4”

1/1

FM276R

without catchSuture size: 5/0 and smaller210 mm, 8 1/4”

1/1



DIADUST

The diamond dust coatingensures an even harderand more wear resistantsurface on the inside ofthe jaws. The structure of the DIADUST coating leadsto a reliable grip for fineneedles and sutures, as wellas for tissue.

RYDER

BM301R-BM328R

BM301R

140 mm

5 1/2”

BM325R

160 mm

6 1/4”

BM302R

180 mm

7”

BM327R

220 mm

8 3/4”

BM328R

250 mm

10”

1/1

DIADUST Micro Needle Holders — RYDER



BM300R

1/1

195 mm, 7 3/4”



The shunt instruments were developed specifically for operations on vesselsthat are between 4 and 6 mm in diameter. This width is frequently found indialysis shunt operations and re-operations. These instruments combine thefeatures of conventional and micro instruments. The working tips are largerthan usual for instruments of this type, and the micro instrument style handlesprovide for greater ease of use.

The shunt set was developed in cooperation withProf. Dr. med. Gottfried Müller, M.D.Caritas Krankenhaus Bad MergentheimUhlandstrasse 797980 Bad Mergentheim

Instruments for Shunt Operations



FM042R

Micro scissors

180 mm, 7”

sharp

FD251R-FD252R

Micro scissors

180 mm, 7”

sharp

sharp/sharp,1 bladeserrated

FM043R

Micro scissors

180 mm, 7”

1 bladeprobepointed

1/1FD251R

1/1

FD252R

1/1



FM047R

Micro ring forceps

180 mm, 7”

diam. ofring: 2 mm

1/1

BV059R

Self-retaining retractor

120 mm, 4 3/4”

Instruments for Shunt Operations



FD255R

Micro tissue forceps

180 mm, 7”

FD253R

Micro dissecting forceps

180 mm, 7”

withplatformtip

FD258R-FD259R

Micro needle holders

180 mm, 7”

1/1 1/1

FD258R

1/1

FD259R

DIADUST DIADUST DIADUST



FM388R

with catch

180 mm, 7”

0.2

FM390R

with catch

200 mm, 8”

1/1

0.2

1/1

Aesculap needle holders have jaws with tungsten carbideinserts with a choice of structure depending on theapplication. A smooth jawsurface as well as a 0.2 mmmicro serration leads to a safehold on the needle. Werecommend tungsten carbide

inserts with a smooth jawsurface for micro suturematerial 9/0 – 11/0 and insertswith a 0.2 mm pitch serrationfor suture material 6/0 – 10/0.

DUROGRIP Micro Needle Holders with Roundand Flat Handles



CASTROVIEJO

BM005R

215 mm, 8 1/2”

CASTROVIEJO

BM004R

180 mm, 7”

CASTROVIEJO

BM001R

145 mm, 5 3/4”

CASTROVIEJO

BM002R

145 mm, 5 3/4”

withsmooth jaw

1/1

0.2

1/1

0.2

1/1

0.2

1

/1



RYDER

BM054R-BM058R

very delicate

0.2 0.2 0.2 0.2 0.2

BM054R

135 mm

5 1/4”

BM055R

155 mm

6”

BM056R

175 mm

7”

BM057R

210 mm

8 1/4”

1/1

BM058R

230 mm

9”

DUROGRIP Micro Needle Holders — RYDER

Aesculap needle holders have jaws with tungsten carbideinserts with a choice of structure depending on theapplication. A smooth jawsurface as well as a 0.2 mmmicro serration leads to a safe

hold on the needle. Werecommend tungsten carbideinserts with a smooth jawsurface for micro suturematerial 9/0 – 11/0 and insertswith a 0.2 mm pitch serrationfor suture material 6/0 – 10/0.



RYDER

BM044R-BM047R

0.4 0.4 0.4 0.4

BM044R

135 mm

5 1/4”

BM045R

175 mm

7”

BM046R

195 mm

7 3/4”

1/1

BM047R

265 mm

10 1/2”



REIN-KUPKA

BM310R

without catch

190 mm, 7 1/2”

0.2

1/1

DUROGRIP Micro Needle Holders with Ergonomic Handles

Aesculap needle holders have jaws with tungsten carbide

inserts with a choice of structure depending on theapplication. A smooth jawsurface as well as a 0.2 mmmicro serration leads to a safehold on the needle. Werecommend tungsten carbideinserts with a smooth jawsurface for micro suturematerial 9/0 – 11/0 and inserts

with a 0.2 mm pitch serrationfor suture material 6/0 – 10/0.



REIN-KUPKA

BM311R

with catch

190 mm, 7 1/2”

0.2

1/1

HELLBERG-KUPKA

BM320R

with locking catch

210 mm, 8 1/4”

0.2

1/1



DE BAKEY

BM032R-BM038R

0.4 0.4 0.4 0.4 0.4

BM032R

150 mm

6”

BM035R

180 mm

7”

BM036R

230 mm

9”

BM037R

250 mm

10”

1/1

BM038R

305 mm

12”

DUROGRIP Micro Needle Holders

Aesculap needle holders have jaws with tungsten carbideinserts with a choice of

structure depending on theapplication. A smooth jawsurface as well as a 0.2 mmmicro serration leads to a safehold on the needle. Werecommend tungsten carbideinserts with a smooth jawsurface for micro suturematerial 9/0 – 11/0 and insertswith a 0.2 mm pitch serrationfor suture material 6/0 – 10/0.



DE BAKEY

BM033R-BM064R

very delicate

0.4 0.4 0.2 0.2

BM025R-BM027R

very delicate

0.2 0.2 0.2

BM033R

165 mm

6 1/2”

BM034R

210 mm

8 1/4”

BM063R

165 mm

6 1/2”

1/1

BM064R

210 mm

8 1/4”

BM025R

180 mm

7”

BM026R

200 mm

8”

1/1

BM027R

230 mm

9”



RYDER

BM074R-BM076R

with smooth jaws

BM074R

150 mm

6”

BM075R

180 mm

7”

1/1

BM076R

230 mm

9”

DE BAKEY

BM051R-BM052R

one extended handle and curvedrings ensure optimum grip

0.4 0.4

195 mm

7 3/4”

1/1

BM052R

245 mm

9 3/4”

BM051R

DUROGRIP Micro Needle Holders

Aesculap needle holders have jaws with tungsten carbide

inserts with a choice of structure depending on theapplication. A smooth jaw

surface as well as a 0.2 mmmicro serration leads to a safehold on the needle. Werecommend tungsten carbideinserts with a smooth jawsurface for micro suturematerial 9/0 – 11/0 and insertswith a 0.2 mm pitch serrationfor suture material 6/0 – 10/0.



BM184R

200 mm, 8”

1/1

0.4

DE BAKEY

BM040R

slender pattern

305 mm, 12”



BARRAQUER

BM560R-BM562R

without catch

BARRAQUER

FD230R-FD231R

without catch

120 mm, 4 3/4”

BARRAQUER

FD232R-FD233R

with catch

120 mm, 4 3/4”

FD231R

1/1

FD230R

FD233R

1/1

FD232R

BM560R

115 mm

4 1/2”

1/1

BM562R

120 mm

4 3/4”

REILL

FD240R-FD241R

without catch

150 mm, 6”

FD240R

1/1

FD241R

STANDARD Micro Needle Holders with Round Handle



FD242R-FD243R

with catch

150 mm, 6”

FD242R

1/1

FD243R

FD244R-FD245R

without catch

185 mm, 7 1/4”

FD246R-FD247R

with catch

185 mm, 7 1/4”

FD244R

1/1

FD245R

FD246R

1/1

FD247R

FM398R-FM392R

without catch

with catch

FM398R

1/1

FM392R

20 mm

200 mm



CASTROVIEJO

BM563R-BM564R

with catch

145 mm, 5 3/4”

FD076R-FD079R

without catch

160 mm, 6 1/4”

BM563R

1/1

BM564R

FD076R

1/1

FD079R

STANDARD Micro Needle Holders with Flat Handle



FD080R-FD081R

without catch

185 mm, 7 1/4”

JACOBSON

FD045R-FD046R

185 mm, 7 1/4”

without catch

with catch

FD048R

with catch

200 mm, 8”

FD080R

1/1

FD081R

FD045R

1/1

FD046R

1/1

YASARGIL



1/1

PAK = Packageof 10 pieces

BB364R

1/1


BB367R

1/1


BB365R

1/1

ST = Packageof 1 piece

BB363R

BA364

165 mm, 6 1/2”

BA365

165 mm, 6 1/2”

BA367

165 mm, 6 1/2”

Microsurgery blades,stainless steel, sterile

Single-Use Microsurgery Scalpels

Micro Scalpelwith Polymer Handle(Grey)

Micro Scalpelwith Polymer Handle(Blue)

Micro Scalpelwith Polymer Handle(Yellow)

Single use, sterilepacked, with light-weight ergonomic

handle.Sales Unit: PACK =

Package of 5 Pieces



BB048R

155 mm, 6”

CASPAR Scalpel HandleBB052R

180 mm, 7”

BB054R

200 mm, 8”

BB046R

135 mm, 5 1/2”

BB045T

145 mm, 5 3/4”

Titanium Scalpel Handle

Scalpel Handles for Microsurgery Blades



KRAYENBÜHL

FD396R-FD399R

185 mm, 7 1/4”

FD398R1

/1 FD399RFD396R

Nerve and Vessel Hooks

FD397R

short ball tip ball tip sharp blunt



Closing force (g)

MÜLLERFE010K-FE024K

Non-traumatic vessel clips, temporary

straight curved curved tips angled to side knee-bent

FE010K VEIN 50 g FE011K FE012K FE013K FE014K

FE020KARTERY 80 g FE021K FE022K FE023K FE024K

1/1 1/1 1/1 1/1 1/1

1/1

MÜLLER

FE005K

Ligature Forceps

jaw profiles,

cross-serrated

1/1

Closing force

Micro Vessel CoronaryClamp

straight

FE001S30 g

1/1

Vessel Clips



Treatment of NewInstruments

Brand new instruments must becleaned before the first sterilizationor use. Protective caps and

protective films must be removedcompletely, especially from chisels,raspatories or microsurgicalinstruments.

Manual Cleaning/ Disinfectio

1) Place instruments into a suitabledisinfectant with active cleaningproperties so that all surfaces, innercavities, lumens and openings come

into contact with the solution. Followthe disinfectant manufacturer'sinstructions.

2) After chemical disinfection, alwaysrinse thoroughly with clear, flowingwater. Follow the instructionsprovided by the manufacturer ofdisinfectant.

3) Remove any dirt still clinging to theinstrument with a soft syntheticbrush. Do not use a scouring or meta

brush.4) Clean any lumens and conduits with

soft, round, synthetic brushes. Pleasenote - the lumen and the brush musthave the same diameter.

5) Final rinsing should be done withdistilled or deionized water.

6) Dry instrument with an absorbent,soft and lint-free cloth.

7) Dry lumens and conduits withcompressed air.

After each use

1) Clean contaminated instruments as quick aspossible.

2) Open instruments with a joint to a 90° angle.

3) For machine cleaning, place the instrumentin a wire basket suitable for the cleaningprocess, (make sure the cleaning solution andrinse water from the machine come intocontact with all surfaces of the instrument).

4) Completely dismantle any dismantableinstruments.

5) Preferably dry disposal.

6) For wet disposal, always use an activecleaning disinfectant. Rinse the instrumentthoroughly with clear, flowing water beforemachine cleaning and disinfecting.

7) If necessary, treat with ultrasound accordingto the manufacturer’s instructions:

for effective mechanical support duringmanual cleaning

for pre-treatment of instruments withdried-on contaminant before machinecleaning

8) If cleaning manually or in a machine:Always follow manufacturer’s instructionsfor detergents and other cleaning solutions.

Care and Maintenance of Surgical Instruments



Recommended Products:

R

R

JG 600

Aesculap oil spray, DBP, in spray-can (non-CFC propellant), forlubricating instruments prior tosterilization. Physiologically safe according to DAB and § 31 LMBG.

JG 598

Aesculap Instrument Lubricant, DBP,for lubricating ends, locks etc. priorto sterilization. Physiologically safeaccording to DAB and §31 LMBG.

Machine Cleaning / Disinfection

1) Select the program according to thematerial (e.g. stainless instrument steel,aluminum) of the instrument to be

cleaned. Follow the machinemanufacturer's instructions.

2) Final rinsing to be done with deionizedwater.

3) Leave sufficient time for drying.

4) Remove the instrument from the machineimmediately after the program is done.

Care / Testing

1) Let instrument cool down to roomtemperature.

2) Lubricate movable parts (e.g. joints andends) slightly with special sterilization-capable, vaporpermeable lubricant (e.g.Aesculap STERLIT Spray or Lubricant).

3) After each cleaning and disinfectionprocess, check the instrument to makesure it is clean, it functions properly andit has not suffered any damage, (e.g. bent,broken, fractured or worn parts).

4) Discard any damaged and defective

instruments and replace.

Storage

1) Place instruments with fine working endsand /or microsurgery instruments in asuitable storage rack.

2) Secure instruments with lock inthe first detent.

Sterilization

1) To steam sterilize, proceed as follows:

Steam sterilization must be carried outaccording to a validated steamsterilization process (e.g. with a sterilizermeeting the specifications of EN 285 andvalidated according to EN 554). When

using the fractional vacuum method, usethe 134°C/ 2 bar program for sterilizationwith a minimum holding time of 5minutes.

2) Where possible, sterilize instruments in thefirst ratchet.



Index

BA364 48

BA365 48

BA367 48

BB045T 49

BB046R 49

BB048R 49

BB052R 49

BB054R 49BB363R 48

BB364R 48

BB365R 48

BB367R 48

BC515R 11

BC516R 11

BC517R 11

BC518R 11

BC519R 11

BC522R 11

BC523R 11BC524R 11

BC525R 11

BC526R 11

BC531R 11

BC532R 11

BC533R 11

BC534R 11

BC535R 11

BD190R 16

BD191R 16

BD192R 16

BD193R 16

BD194R 16

BD195R 16

BD196R 16

BD197R 16

BM001R 35

BM002R 35

BM004R 35

BM005R 35

BM025R 41

BM026R 41

BM027R 41

BM032R 40

BM033R 41

BM034R 41

BM035R 40

BM036R 40BM037R 40

BM038R 40

BM040R 43

BM044R 37

BM045R 37

BM046R 37

BM047R 37

BM051R 42

BM052R 42

BM054R 36

BM055R 36

BM056R 36BM057R 36

BM058R 36

BM063R 41

BM064R 41

BM074R 42

BM075R 42

BM076R 42

BM184R 43

BM300R 29

BM301R 28

BM302R 28

BM310R 38

BM311R 39

BM320R 39

BM325R 28

BM327R 28

BM328R 28

BM560R 44

BM562R 44

BM563R 46

BM564R 46

BV059R 32

FD045R 47

FD046R 47

FD048R 47

FD076R 46

FD079R 46

FD080R 47FD081R 47

FD230R 44

FD231R 44

FD232R 44

FD233R 44

FD240R 44

FD241R 44

FD242R 45

FD243R 45

FD244R 45

FD245R 45

FD246R 45FD247R 45

FD251R 31

FD252R 31

FD253R 33

FD255R 33

FD258R 33

FD259R 33

FD396R 50

FD397R 50

FD398R 50

FD399R 50

FE001S 51

FE005K 51

FE010K 51

FE011K 51

FE012K 51

FE013K 51

FE014K 51

FE020K 51

FE021K 51

FE022K

FE023K

FE024K

FM042R

FM043R

FM047R

FM218R

FM221RFM223R

FM228R

FM230R

FM236R

FM276R

FM388R

FM390R

FM392R

FM398R

FM430R

FM431R

FM432RFM433R

FM434R

FM435R

FM436R

FM437R

FM438R

FM439R

FM440R

FM441R

FM442R

FM444R

FM451R

FM452R

FM453R

FM454R

FM455R

FM470R

FM471R

FM472R

FM473R

FM474R



FM476R 8

FM477R 8

FM478R 8

FM479R 8

FM480R 8

FM481R 8

FM482R 8

FM483R 8

FM484R 8FM485R 8

FM486R 8

FM488R 8

FM489R 8

FM490R 8

FM491R 8

FM492R 8

FM493R 8

FM503R 8

FM504R 8

FM505R 8

FM506R 8FM507R 8

FM508R 8

FM520R 18

FM521R 18

FM522R 18

FM523R 18

FM524R 18

FM525R 18

FM526R 18

FM527R 18

FM528R 18

FM529R 18

FM530R 18

FM531R 18

FM532R 18

FM533R 18

FM534R 20

FM535R 20

FM536R 20

FM537R 20

FM538R 20

FM539R 20

FM540R 22

FM541R 22

FM542R 22

FM543R 22

FM544R 22

FM545R 22

FM546R 22

FM547R 22FM548R 22

FM549R 22

FM550R 24

FM551R 24

FM552R 24

FM553R 24

FM554R 24

FM555R 24

FM560R 26

FM561R 26

FM563R 18

FM564R 18FM565R 18

FM566R 18

FM567R 18

FM568R 18

FM570R 12

FM571R 12

FM572R 12

FM573R 12

FM574R 12

FM575R 12

FM576R 12

FM577R 12

FM578R 12

FM579R 12

FM580R 12

FM581R 12

FM582R 14

FM583R 12

FM584R 14

FM585R 12

FM586R 14

FM587R 14

FM588R 14

FM589R 14

FM590R 14

FM591R 14

FM592R 12

FM593R 12

FM594R 12

FM595R 12FM596R 12

FM597R 14

FM598R 14

FM599R 12

FM600R 12



Cross Reference

Scanlan Aesculap Page

3784-30 FD396R 50

3784-31 FD397R 50

3784-32 FD398R 50

3784-33 FD399R 50

4004-204 FM594R 12

4004-206 FM593R 124004-210 FM578R 12

4004-212 FM581R 12

4004-216 FM570R 12

4004-217 FM571R 12

4004-220 FM572R 12

4004-221 FM573R 12

4004-224 FM574R 12

4004-225 FM575R 12

4004-226 FM576R 12

4004-227 FM577R 124004-228 FM596R 12

4004-229 FM595R 12

4004-230 FM590R 14

4004-232 FM591R 14

4004-240 BD191R 16

4004-242 BD195R 16

4004-244 BD192R 16

4004-245 BD193R 16

4004-246 BD194R 16

4004-248 BD196R 164004-250 FM597R 14

4004-251 FM587R 14

4004-252 FM598R 14

4004-253 FM589R 14

4004-260 FD253R 33

4004-260 FM586R 14

4004-262 FM588R 14

4004-270 FM592R 12

4004-272 FM600R 12


4004-280 FM582R 14

4004-282 FM584R 14

4004-320 FM579R 12

4004-57 BD198R 16

4004-77 BD190R 16

4004-79 BD197R 164004-84 BD200R 16

4004-88 BD201R 16

4004-95 FM580R 12

4004-96 FM583R 12

4004-98 FM599R 12

4004-99 FM585R 12

6006-100 FM551R 24

6006-102 FM554R 24

6006-108 FM543R 22

6006-110 FM548R 226006-116 BM005R 35

6006-120 FM236R 20

6006-120 FM566R 18

6006-121 FM565R 18

6006-122 FM276R 27

6006-122 FM531R 18

6006-123 FM527R 18

6006-124 FM221R 18

6006-124 FM221R 18

6006-129 FM567R 186006-131 FM532R 18

6006-138 FM561R 26

6006-158 FM544R 22

6006-159 FM549R 22

6006-170 FM550R 24

6006-171 FM553R 24

6006-174 FM552R 24

6006-175 FM555R 24

6006-29 BM325R 28

Scanlan Aesculap Pag

6006-310 FM538R 20

6006-312 FM535R 20

6006-33 BM302R 28

6006-330 FM539R 20

6006-332 FM536R 20

6006-340 FM534R 206006-342 FM537R 20

6006-37 BM327R 28

6006-41 BM328R 28

6006-44 FM520R 18

6006-45 FM524R 18

6006-48 FM560R 26

6006-50 FM522R 18

6006-52 FM528R 18

6006-58 FM541R 22

6006-59 FM523R 186006-60 FM546R 22

6006-61 FM529R 18

6006-70 FD046R 47

6006-70 FM540R 22

6006-72 FD045R 47

6006-72 FM545R 22

6006-76 FD081R 47

6006-82 FM564R 18

6006-84 FM530R 18

6006-90 FM542R 226006-92 FM547R 22

7007-40 BC522R 11

7007-40-5 BC531R 11

7007-42 BC523R 11

7007-42-5 BC532R 11

7007-44 BC524R 11

7007-440 FM437R 6

7007-442 FM438R 6

7007-444 FM439R 6

7007-44-5 BC533R 11



Jarit Aesculap Page

278-092 FM530R 18

278-093 FM564R 18

278-094 FM527R 18

278-095 FM565R 18

278-096 FM532R 18

278-097 FM567R 18278-112 FM531R 18

278-113 FM566R 18

278-119 FM221R 18

279-100 FM586R 14

279-101 FM588R 14

279-110 FM597R 14

279-111 FM598R 14

310-305 FM477R 8

310-306 FM479R 8

310-307 FM480R 8310-350 BC531R 11

310-351 BC532R 11

310-352 BC533R 11

310-353 BC534R 11

310-354 BC535R 11

311-350 BC515R 11

311-351 BC516R 11

311-352 BC517R 11

311-353 BC518R 11

311-354 BC519R 11


7007-446 FM440R 6

7007-448 FM441R 6

7007-450 FM470R 6

7007-452 FM471R 6

7007-454 FM472R 6

7007-456 FM473R 67007-458 FM474R 6

7007-46 BC525R 11

7007-460 FM476R 8

7007-462 FM477R 8

7007-464 FM478R 8

7007-46-5 BC534R 11

7007-466 FM479R 8

7007-468 FM480R 8

7007-479 FM451R 6

7007-48 BC526R 117007-481 FM452R 6

7007-483 FM453R 6

7007-485 FM454R 6

7007-48-5 BC535R 11

7007-487 FM455R 6

7007-490 FM482R 8

7007-492 FM483R 8

7007-494 FM484R 8

7007-496 FM485R 8

7007-498 FM486R 87007-540 FM431R 6

7007-542 FM432R 6

7007-544 FM433R 6

7007-546 FM434R 6

7007-548 FM435R 6

7007-590 FM504R 8

7007-592 FM505R 8

7007-594 FM506R 8

7007-596 FM507R 8

7007-598 FM508R 8



Cross Reference

V. Mueller Aesculap Pag

CH5725 BC532R 11

CH5725-001 BC516R 11

CH5730 BC533R 11

CH5730-001 BC517R 11

CH5735 BC534R 11

CH5735-001 BC518R 11CH5740 BC535R 11

CH5740-001 BC519R 11

CH8030-21 FM599R 12

CH8035-21 FM585R 12

CH8160-19 FM550R 24

CH8589 BM005R 35

CH8590 FD048R 47

CH8592 FD046R 47

CH8752 FD245R 45

CH8756 FD244R 45NL3086 FD396R 50

NL3087 FD397R 50

NL3088 FD398R 50

NL3089 FD399R 50

NL3785-037 FD246R 45

NL3785-039 FD247R 45

OP0703 BB048R 49

OP7399 BM002R 35

OP7412 BM563R 46

RH0872 BB365R 48SU1587-06 BB363R 48

V. Mueller Aesculap Page

CH04204 FM594R 12

CH04206 FM593R 12

CH04217 FM571R 12

CH04220 FM572R 12

CH04221 FM573R 12

CH04224 FM574R 12CH04225 FM575R 12

CH04226 FM576R 12

CH04227 FM577R 12

CH04228 FM596R 12

CH04230 FM590R 14

CH04232 FM591R 14

CH04244 BD192R 16

CH04246 BD194R 16

CH04248 BD196R 16

CH04250 FM597R 14CH04252 FM598R 14

CH04260 FM586R 14

CH04262 FM588R 14

CH04280 FM582R 14

CH04282 FM584R 14

CH04320 FM579R 12

CH06100 FM551R 24

CH06102 FM554R 24

CH06108 FM543R 22

CH06110 FM548R 22CH06120 FM566R 18

CH06121 FM565R 18

CH06122 FM531R 18

CH06123 FM527R 18

CH06124 FM221R 18

CH06158 FM544R 22

CH06159 FM549R 22

CH0629 BM325R 28

CH0633 BM302R 28

V. Mueller Aesculap Page

CH0650 FM522R 18

CH0652 FM528R 18

CH0658 FM541R 22

CH0660 FM546R 22

CH0670 FM540R 22

CH0672 FM545R 22CH0682 FM564R 18

CH0684 FM530R 18

CH0690 FM542R 22

CH0692 FM547R 22

CH07450 FM470R 6

CH07452 FM471R 6

CH07454 FM472R 6

CH07456 FM473R 6

CH07458 FM474R 6

CH07460 FM476R 8CH07462 FM477R 8

CH07464 FM478R 8

CH07466 FM479R 8

CH07468 FM480R 8

CH13020 FM581R 12

CH13023 FM583R 12

CH13024 FM578R 12

CH13025 FM580R 12

CH13038 FM483R 8

CH2448 BM564R 46CH2452 BM001R 35

CH2456 BM004R 35

CH5661-001 FM451R 6

CH5661-002 FM452R 6

CH5661-003 FM453R 6

CH5661-004 FM454R 6

CH5661-005 FM455R 6

CH5720 BC531R 11

CH5720-001 BC515R 11



Pilling Aesculap Page

152818 BM002R 35

152825 BM001R 35

352577 BB365R 48

352591 BB048R 49

354964 BM004R 35

354972 FM523R 18354973 FM529R 18

354992 BM325R 28

354994 BM302R 28

354996 BM327R 28

354998 BM328R 28

357530 FD396R 50

357531 FD397R 50

357532 FD398R 50

357533 FD399R 50

357601 FD046R 47357603 FD048R 47

357642 FM479R 8

357643 FM480R 8

357653 FM477R 8

357654 FD244R 45

357654 FM392R 45

357655 FD245R 45

357656 FD246R 45

357657 FD247R 45

357667 FM388R 34357670 FM398R 45

357676 FM390R 34

357690 FM471R 6

357691 FM474R 6

424100 BM563R 46

424110 BM564R 46

35-2150 BC522R 11

35-2152 BC523R 11

35-2154 BC524R 11

Pilling Aesculap Page

354964DG FM542R 22

354965DG FM548R 22

355558DG FM539R 20

355559DG FM534R 20

355570DG FM223R 18

355572DG FM218R 18355573DG FM221R 18

357601DG FM547R 22

357603DG FM543R 22

357667DG FM564R 18

357670DG FM527R 18

357674DG FM230R 18

357674DG FM567R 18

357676DG FM228R 18

357676DG FM565R 18

doc 719 micro instruments cardiovascular surgery

Documents