Diy chandelier earrings inspired by stunning wire wrap arts

Most women would love to replenish new pieces for

their jewelry boxes daily for creating fresh image,

especially the diy earrings dangling beside earlobes.

Those accessories are so beautiful and versatile that

each of you can design one or more pairs by

yourselves at home easily. In this post, I will show

you how to diy a pair of diy chandelier earrings in

easy way.

Supplies needed in diy earrings:

10mm Faceted Heart-shape Glass Pendant

6mm Abacus Glass Bead

Eyepin

Earring hooks

1.5mm Golden Aluminum Wire

0.5mm Golden Brass Wire

Flat Nose Plier

Side Cutting Plier

Round Nose Plier

Instructions on diy chandelier earrings:

Step1: wrap out the chandelier component

1. Prepare one 20cm long wire and start by wrapping

the first loop at center around a cylindrical object,

such as a pen in my plan. Take it off the pen;

2. Grab your right half segment, and then rotate it

around the bottom of Round Nose Plier, in

anti-clockwise direction;

3. Wrap another loop in clockwise direction, with same

size for a figure “8”;

4. Loop the leftover wire in anti-clockwise direction;

It is a post about diy earrings out of simply Aluminum wire and several radiant glass beads. In addition,

this pair of creative diy chandelier earrings is inspired by some amazing wire wrap objects I’ve seen.

Step2: make the beaded elements in diy earrings

5. Adjust the positions of both three loops as

the picture shows;

6. Do repeat the looping processes in

directions: clockwise -anti -clockwise

-clockwise.

1. Slide your 6mm Abacus Glass Bead onto

eyepin and loop the end. 9 such pieces are

needed for one diy chandelier earrings;

2. Work a triangle bail for both three

heart-shape pendants.

Cut a 5cm long of brass wire. Thread wire

through the hole on pendant, leaving about

1/3 in;

Twist two ends for several turns and then wrap

the short piece of wire around the longer;

Take the longer wire and form a loop around

your Round Nose Plier. Continue wrapping the

wire until finished all leftover part. Tuck the

tails by squeezing it with flat nose plier.

2. Attach on the three beaded components onto the wire wrapped chandelier.

The Diy chandelier earrings consist of numbers of

radiant glass beads so that they can shin in light all

the time. Besides, to make pairs of diy earrings,

you may also make use of vintage gemstone bead.

All in all, enjoy yourself in each day!

Master other style of earring making ideas, welcome to visit：

www.pandahall.com/learning-center/Earrings/grid-9-p1.html

Step3: hook the abacus and

heart-shape elements

Hook three of the abacus glass bead elements

and then one heart-shape pendant. Make three

groups.

Step4: assemble your diy earrings

1. Tie another 5cm long section of brass wire

up to the first large loop, and make a hanger

below as picture show;