®

A Product of Technology

PRESSURE SEAL

BOLTED BONNET

Certified to ISO 9001 Standards

KCCGP 0900-1Direct Seal ®Valves

TABLE OF CONTENTS

About KITZ . . . . . . . . . . . . . . . . . . . . . . . . . . . 3How to Order KITZ Direct Seal® Valves . . . . . . 4Features and Benefits . . . . . . . . . . . . . . . . . . . 5Directional Solidification Process. . . . . . . . . . . 6

PRESSURE SEALStandards/Testing/Applications . . . . . . . . . . . . 7Gasket Arrangement . . . . . . . . . . . . . . . . . . . . 8Dimensions & WeightsGate Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 9Globe Valves. . . . . . . . . . . . . . . . . . . . . . . . . 10“Y” Globe Valves . . . . . . . . . . . . . . . . . . . . . . 11Lift Check Valves . . . . . . . . . . . . . . . . . . . . . 12Swing Check Valves . . . . . . . . . . . . . . . . . . . 13Tilting Disk Valves . . . . . . . . . . . . . . . . . . . . . 14

BOLTED BONNET Standards/Testing/Applications . . . . . . . . . . . 15Features/Dimensions/WeightsGate Valves . . . . . . . . . . . . . . . . . . . . . . . 16-17Globe Valves . . . . . . . . . . . . . . . . . . . . . . 18-19Swing Check Valves. . . . . . . . . . . . . . . . . 20-21

Operator Options . . . . . . . . . . . . . . . . . . . . . 22KITZ Quality . . . . . . . . . . . . . . . . . . . . . . . . . 23

KITZ Corporation ofCalifornia

Alameda, California

About

KITZ CorporationEstablished in 1951, KITZ Corporation is recognized worldwide as a leading manufacturer of quality valves. KITZproduces a wide variety of multi-turn and quarter-turn valves in carbon, stainless, bronze, iron, and other exotic alloys.Our mission is to become the valve of choice in the Refinery, Chemical, Petro-Chemical and Power Generation markets.

KITZ Corporation of CaliforniaIn December, 1999, KITZ acquired Alameda, California based Quality Assured Products (QAP). Founded in 1988, QAPspecializes in the manufacture of high pressure bolted bonnet and pressure seal valves of all types including gate, globeand check (vertical and y-pattern) and top entry ball valves for use in process and power industries.

Operating now as KITZ Corporation of California (KCC), this newest member of our wholly owned Global Manufacturingteam builds valves using the “Directional Solidification” process. This method produces the highest quality castings insignificantly less delivery lead time than is required for conventional castings.

KITZ Direct Seal® valves comply with all applicable standards and KCC's QA System has been certified ISO 9001 byBureau Veritas Quality International.

With KCC, KITZ is dedicated to providing our customers high quality products with numerous combinations of seat andbody/bonnet materials, special end connections as well as automation to meet any application.

Combining the resources of KITZ and the capabilities of KCC, we look forward to supplying solutions to industry’s flow control requirements.

®

3

TRIM NO. WEDGE/DISC SEATS STEM TRIM NO. WEDGE/DISC SEATS STEM01 CR13 CR13 CR13 15 HASTELLOY HARDFACED HASTELLOY05 HARDFACED HARDFACED CR13 16 HARDFACED HARDFACED 18-8-3M08 CR13 HARDFACED CR13 17 HARDFACED HARDFACED 34709 MONEL MONEL MONEL 18 HARDFACED HARDFACED MONEL10 18-8-3M 18-8-3M 18-8-3M 19 TITANIUM HARDFACED TITANIUM11 MONEL HARDFACED MONEL 20 TITANIUM TITANIUM TITANIUM12 18-8-3M HARDFACED 18-8-3M 21 INCONEL INCONEL INCONEL13 ALLOY 20 ALLOY 20 ALLOY 20 22 INCONEL HARDFACED INCONEL14 HASTELLOY HASTELLOY HASTELLOY 23 347 HARDFACED 347

50 SPECIAL SPECIAL SPECIAL

F - END CONNECTION

C - PRESSURE RATING01 - 1/4″ 09 - 21/2″ 18 - 12″ 28 - 28″ 0 - 150 6 - 80002 - 3/8″ 10 - 3″ 19 - 14″ 30 - 30″ 1 - 300 7 - 90003 - 1/2″ 11 - 31/2″ 20 - 16″ 32 - 32″ 2 - 600 8 - 169004 - 3/4″ 12 - 4″ 21 - 18″ 34 - 34″ 3 - 1500 9 - 268005 - 1″ 13 - 5″ 22 - 20″ 36 - 36″ 4 - 2500 x - SPECIAL06 - 11/4″ 14 - 6″ 23 - 22″ 42 - 42″ 5 - 450007 - 11/2″ 15 - 8″ 24 - 24″ 48 - 48″08 - 2″ 16 -10″ 26 - 26″ 99 - SPECIAL

A - TYPE OF VALVE

B - SIZE

D - BONNET CONNECTION E - PORT

G - BODY MATERIAL

H - TRIM MATERIAL

I - OPERATORS

01 - FLEX WEDGE 20 - VERTICAL (T) 30 - TILTING DISC02 - SPLIT WEDGE 21 - VERTICAL STOP CHECK 31 - SWING03 - SOLID WEDGE 22 - Y-PATTERN 32 - LIFT04 - DOUBLE DISC PARALLEL SEAT 23 - Y-PATTERN STOP CHECK 33 - LIFT ANGLE05 - CONDUIT 24 - ANGLE 34 - LIFT (Y)

25 - ANGLE STOP CHECK 35 - REVERSE CURRENT26 - ELBOW DOWN 36 - WAFER27 - ELBOW DOWN STOP CHECK 37 - BALL

P - PRESSURE SEAL BONNET C - CONVENTIONAL (B16.34) B - BUTTWELD T - THREADEDB - BOLTED BONNET F - FULL PORT F - FLANGED H - HUBE - EXTENDED BONNET R - REDUCED PORT R - FLANGED, RING JOINT C - COMBINATIONW - WELDED BONNET S - SOCKET WELD X - SPECIALS - BELLOW SEAL BONNET

M - MANUAL L - LEVER Q - SPECIALP - PNEUMATIC H - HYDRAULICE - ELECTRIC B - BARE STEMG - GEAR S - SPECIAL

CAST CARBON STEEL CAST CHROME STEEL CAST STAINLESS STEEL & ALLOYS02 - ASTM A216 WCB 10 - ASTM A217 WC6 (11/4 CR) 20 - ASTM A351 CF8M (316) 31 - ASTM A351 CK3MCUN 45 - TITANIUM (ASTM B367)03 - ASTM A216 WCC 11 - ASTM A217 WC9 ( 21/4 CR) 21 - ASTM A351 CF10M (316H) 32 - ASTM A351 CDMCu 46 - ZIRCONIUM (ASTM B493)04 - ASTM A352 LCB 12 - ASTM A217 C-5 (5 CR) 22 - ASTM A351 CF3M (316L) 33 - ASTM A351 CK20 47 - NICKEL (A494 CW12MW)05 - ASTM A352 LCC 13 - ASTM A217 C-12 (9 CR) 23 - ASTM A351 CF8C (347) 34 - ASTM A351 CK20 (310) 48 - INCONEL 625 (CW6MC)06 - ASTM A352 LC1 14 - ASTM A217 C-12A (9ACR) 24 - ASTM A351 CF10C (347H) 36 - ASTM A743 CA6NM (13-4) 49 - INCONEL 800 (CT15C)07 - ASTM A352 LC2 15 - ASTM A217 CCA15 (13 CR) 25 - ASTM A351 CF3C (347L) 37 - STAINLESS STEEL 904L 50 - INCONEL 825 (CU5MCuC)08 - ASTM A352 LC3 26 - ASTM A351 CF8 (304) 40 - ALLOY 20 51 - ASTM A890 1A

27 - ASTM A351 CF10 (304H) 41 - HASTELLOY B (A494 N12MV) 52 - ASTM A890 2A28 - ASTM A351 CF3 (304L) 42 - HASTELLOY C (A494 CW2M) 53 - ASTM A890 3A29 - ASTM A351 CG8M (317) 43 - MONEL (A494 M35-1) 54 - ASTM A890 4A30 - ASTM A351 CG3M (317L) 44 - INCONEL 600 (CY40) 55 - ASTM A890 5A

75 - SPECIAL

A B C D E F G H I JNote: HF-Acid valves are not included

on this order form.

HOW TO ORDER DIRECT SEAL VALVES- - - - - -

GATE

GLO

BE

CH

ECK

KCCDS0900

® ®

4

J - SPECIAL REQUIREMENTS

Direct Seal® critical service pressure seal Gate, Globe, Check, Stop Check and “Y”Pattern Globe valves are available in sizes 2″ to 48″ in pressure classes 150# – 2500#.Casting materials include: Carbon Steel, Chrome Moly, Stainless Steel, Alloy 20, Monel,Inconel and Hastelloy.

Direct Seal® valves are designed with pressure energized body-bonnet seal and withbody castings produced using the “Directional Solidification” process. Employing thisprocess results in casting quality which previously could only be achieved by forging.

The term “Directional Solidification” refers to a casting process in which the cooling rateof a valve body or other valve cast parts are controlled. Solidification occurs first at theregion most remote from the source of the feeding molten metal, or riser, then progressesin a controlled manner directionally toward the riser. This process eliminates anypossibility of the most damaging casting defect - centerline shrinkage.

Utilizing Directional Solidification, KITZ Direct Seal® valve body castings can be producedto exacting quality standards.

QUALITY

Valve body castings produce acceptance levels in all castable materials virtuallyeliminating any need to upgrade and are not subject to deterioration at heat affectedzone interfaces in sour gas services in refineries. Stress corrosion cracking and “reheatcracking” are eliminated by this process. Valve castings produced in this manner exceedeven forged part quality standards because they are equally strong at all axes and havefar better shaped flow contours, providing higher Cv.

DELIVERY

KITZ Direct Seal® valves can be delivered quickly due to the virtual elimination of theindeterminate nature of unknown casting upgrade cycles of welding and re-X-ray.Delivery schedules are also more dependable due to the elimination of any uncertaintyin the manufacturing process. Delivery is significantly less than those of other producersof critical service valves.

FEATURES AND BENEFITS

5

®

6

THE DIRECTIONAL SOLIDIFICATION PROCESS

KITZ DIRECT SEAL® valves are manufacturedutilizing a casting cooling process known asDirectional Solidification.

THE OLD WAY OF CASTING

Prior to the introduction of this process to valve manufacturing, valve body castings were produced by theprogressive solidification method shown in Figure 1.

When the feed channels to the source of molten metal areblocked by random crystal formation, uniformly thickcasting walls are subject to centerline shrinkage (SeeFigure 2).

PHASE 1 As dendrites begin to grow into the still liquid interior, the feeding of interspaces is still possible.

PHASE 2 As dendrite peaks come into contact with each other, the flow of the metal is restricted.

PHASE 3 Cavities begin to form due to the constrictions of the feed channels by the dendrites.

OUR CASTING PROCESS TODAY

The Directional Solidification process can berepresented by the stepped wedge shown in Figure 3.

It is easy to realize that the thinnest portions of the wedgemost remote from the feeding riser will cool first, followedby the next thickest section.

In this manner, the portions of the casting solidifying firstare never deprived of makeup metal to replace thecontracting volume.

DIRECT SEAL® valves using Directional Solidificationtechnology meet and exceed industry quality standards.

Figure 4: Tapered section walls cause the solidification process to begin at the thinnest section part of the mold (Directional Solidification).

As the dendritic crystals form, the cavities which theyform can still be penetrated and filled by the molten metal.

������

yyyyyy

������

yyyyyy

������

yyyyyy

������

yyyyyy���

�

���

��

���

���

��

Figure 1: Solidification begins at the mold wall and progresses outward. As the molten metal cools, dendrite crystals are formed.

Figure 2: Shrinkage occurs when the feed channels are blocked by the constriction caused by the forming dendrites.

�y

Figure 3: Solidification occurs from heat escaping through the mold wall. Heat extraction depends on the surface to volume ratio.

Stepped wedgeMoltenmetalfeeder(riser)

Sand

Liquid

Solidified skin

Residualmelt

width ofsolidification

Shrinkage cavities

Sand

minwall Feeding route

Liquid

Advancing solidification

Uniformvalve wallthickness

4x

4x3x

3x2x

2xx

x Solidified

Dendriticcrystals

Mushy

Fluid

After 1 min After 4 min After 9 min After 16 min

®QUALITY VALVES

7

GATE, GLOBE & CHECK DIRECT SEAL® VALVES

PRESSURE SEAL

DESIGN STANDARDS

• Pressure/Temperature: ASME B16.34• Face-to-Face: ASME B16.10• Flange: ASME B16.5• Butt weld: ASME B16.25• API-600 Appendix A Style A

INSPECTION & TESTING

• Shell & Seat: API 598, MSS SP-61, ASME B16.34

MATERIALS

• Pressure containing: Carbon Steel, Chrome Moly,Stainless Steel or other exotic alloys for hot hydrogen service, 254SMO valves

• Trim: Nace

APPLICATIONS

• Hydro Cracker • Full Port Pressure• Hydrotreater Seal Valves Available• Hydrogen Service• Feed Pump Stop Check

8

SEPARATE YOKEAND BONNET

“Y” GLOBE

ANGLE LIFT CHECK

BODY GUIDED DISK

EGMENTALETAINING

RING

PACER RING

FLEX. WEDGE ORPARALLEL DISCAVAILABLE

GATE

SWING CHECK TILTING DISC VERTICAL LIFT CHECK

SUPERIORCASTING QUALITY

DIFFERENTIAL ANGLEBETWEEN SEAL ANDRING BONNET

4 ANGLE FOR OPTIMIZEDEALING AT ALL PRESSURES &

TEMPERATURES

“Y” GLOBE CHECK

SILVER OR GOLDPLATED SEAL RING

STAINLESS STEELINLAY FOR SEALINTEGRITY

STELLITE OVERLAYSEAT AND DISC

↵

↵

A

A

↵

↵

A

A

↵

↵

A

A

↵

↵

A

A

↵

↵

A

A

↵

↵

A

A

↵

↵

A

A

↵

↵

A

A

A - A

ADDITIONAL TAPERFOR DIRECTIONAL SOLIDIFICATION AND VERTICAL STIFFNESS

GATE VALVES CONFORM TO API-600 APPENDIX A STYLE A

ONNET

STELLITE GUIDESON BODY AND DISC

GLOBE

PRESSURE SEALGASKET ARRANGEMENT

Caution: After installation and the valve is subject to working pressureand temperature, we recommend that the bonnet draw bolts bechecked for tightness. This will insure that the bonnet does notdrop and compromise the pressure seal integrity.

PRESSURE SEAL

* Dimension center to top in open position.** Larger sizes are supplied with gear actuators as standard.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.

9

A

D

B

Class 600 Class 900 Class 1500 Class 2500

inmm

25021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

50024

600

15.63397

20.25514

21.75552

27.75705

35.75908

43.88111552.13132460.36153365.63166773.25

86.44219695.562427

112.502858

B/W

73

88

163

372

662

1060

1396

1835

2527

5000

7500

10000

SEATPORT2.0051

2.0051

2.6367

3.4487

5.191326.501657.882009.75248

10.25260

13.00330

14.25362

15.75400

19.00483

BUTTWELD8.50216

10.00254

12.00305

14.00355

20.00508

26.00660

31.00787

36.00914

39.00991

43.00109243.00109247.00119456.001422

15.63397

15.63397

22.50572

28.13715

36.75933

44.50113054.00137261.50156265.88167374.50189286.44219695.562427112.502858

B/W

55

60

119

188

490

854

1210

1790

2495

3130

5000

SEATPORT2.0051

2.0051

2.6367

3.4487

5.191326.501657.882009.75248

10.25260

13.00330

14.25362

15.75400

19.00483

BUTTWELD8.50216

10.00254

12.00305

16.00406

22.00559

28.00711

34.00864

39.00991

42.00106747.00119453.00134658.001473

15.63397

21.50546

23.25591

28.50724

38.50978

44.75113755.38140762.25158167.75172175.75192489.13226494.692405113.382880

B/W55

114

146

296

697

1215

1987

2753

3270

4240

5000

7500

10000

SEATPORT2.0051

2.0051

2.6367

3.4487

5.191326.501657.882009.75248

10.25260

11.75298

13.25337

14.75375

17.75451

BUTTWELD7.001788.50216

10.00254

12.00305

18.00457

23.00584

28.00711

32.00813

35.00889

39.00991

43.00109247.00119455.001397

BUTTWELD11.00279

13.00330

14.25362

18.00457

24.00610

30.00762

36.00914

41.00104144.00111849.00124555.001397

15.44392

21.75552

23.25591

27.38695

37.50953

44.00111854.50138461.50156266.75169574.50189285.75217889.182265

104.02642

B/W45

100

150

201

521

793

1365

2136

3265

3900

7000

7500

13000

SEATPORT1.5038

1.7544

2.1354

2.6367

4.251085.381376.501658.002038.00203

10.00254

10.50267

12.13308

14.50368

Size A B D Weight A B* D Weight A B* D Weight A B* D Weight

®

GATE VALVESDIMENSIONS & WEIGHTS

Class 600 – 900 – 1500 – 25002″ – 24″

Double disk parallel seat valvesavailable in same dimensions,weights and pressure classes.

**

PRESSURE SEAL

* Dimension center to top in open position.** Larger sizes are supplied with gear actuators as standard.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.

10

®

Stop check valves available insame dimensions, weights andpressure classes.

B

D

A

Class 600 Class 900 Class 1500 Class 2500

inmm

25021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

50024

600

17.13435

16.25413

18.25464

22.50572

31.25794

26.00660

31.00787

33.00838

35.00889

39.009918

B/W55

60

90

188

451

726

1195

1771

2543

3566

SEATPORT1.8848

2.2557

2.7570

3.5390

5.001276.671697.75197

10.50267

12.38314

14.75375

BUTTWELD10.00254

10.00254

15.00381

18.00457

24.00610

29.00737

33.00838

38.00965

40.50102944.50130

17.13435

17.13435

21.75552

25.38645

34.50876

40.75103546.25117554.25137862.25158170.131781

B/W100

100

132

253

695

1168

1826

2782

3562

4781

SEATPORT1.8848

2.2557

2.7570

3.5390

5.001275.501407.751978.75222

10.25260

12.75324

BUTTWELD10.00254

16.25413

18.50470

21.50546

27.75705

32.75832

39.00991

44.50113049.50125754.501384

17.13435

19.50495

22.00559

26.34669

36.25921

47.50120751.25130258.50148666.25168376.001930

B/W100

114

197

341

778

1546

2512

3232

4650

6000

SEATPORT1.8848

2.2557

2.7570

3.5390

5.001275.501407.001788.382138.38213

11.75298

BUTTWELD10.00254

13.00330

14.00356

17.00432

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

BUTTWELD14.50368

20.00508

22.75578

26.50673

36.00914

40.25102250.00127056.00142256.00142260.001524

23.69602

19.25489

21.75552

26.50673

35.75908

45.50115649.50125757.75146769.25175960.001524

B/W228

124

242

431

952

1891

4140

4500

4500

7000

SEATPORT1.3835

1.8848

1.8848

2.1354

3.8899

5.001275.881497.751978.382139.75248

Size A B D Weight A B* D Weight A B* D Weight A B* D Weight

GLOBE VALVESDIMENSIONS & WEIGHTS

Class 600 – 900 – 1500 – 25002″ – 24″

**

PRESSURE SEAL

* Dimension center to top in open position.** Larger sizes are supplied with gear actuators as standard.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.

11

®

Stop check valves available insame dimensions, weights andpressure classes.

Class 600 Class 900 Class 1500 Class 2500

inmm

25021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

50024

600

25.25641

25.25641

25.25641

32.25819

36.25921

42.50108049.13124858.25148066.50168974.00188078.001981117.882994

B/W

102

125

273

425

687

1136

1682

2413

3382

3402

4536

6169

SEATPORT

2.0051

2.2557

2.2557

4.631187.001788.632198.382139.50241

10.38264

13.00330

14.75375

BUTTWELD

14.50368

14.50368

16.00406

24.00610

29.00737

33.00838

38.00838

40.50102944.50113058.00147355.00139759.001511

25.25641

25.25641

25.25641

35.00889

41.00104147.00119455.00139763.00160071.00180374.00188078.001981117.882994

B/W

225

225

275

657

1136

1736

2743

3952

5394

7500

10000

13600

SEATPORT

2.2557

2.2557

2.2557

4.631187.001788.632198.382139.50241

10.38264

13.00330

14.75375

15.75400

BUTTWELD

14.50368

14.50368

16.00406

27.75705

32.75832

39.00991

44.50113049.50125754.50138458.00147355.00139759.501511

25.25641

25.25641

25.25641

37.52953

48.75123852.25132759.13150267.25170874.50189274.00188078.001981117.882994

B/W

225

225

275

738

1465

2384

3075

4422

6078

7500

10000

13600

SEATPORT

2.2557

2.2557

2.2557

4.631177.001788.632198.382139.50241

10.38264

13.00330

14.75375

15.75400

BUTTWELD

14.50368

14.50368

16.00406

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

58.00147355.00139759.501511

BUTTWELD

14.50368

14.50368

18.00457

36.00914

40.25102250.00127056.00142260.00152448.75123858.00147358.001473

25.25641

25.25641

25.25641

38.00965

49.00124552.00132159.00149968.00172761.00154978.00198178.001981

B/W

225

225

275

853

1782

2916

3741

5463

6000

12000

12000

SEATPORT

2.2557

2.2557

2.2557

3.7595

5.751467.251848.632198.63219

10.38264

12.25311

13.00330

Size A B D Weight A B* D Weight A B* D Weight A B* D Weight

B

A

D

"Y" GLOBE VALVESDIMENSIONS & WEIGHTS

Class 600 – 900 – 1500 – 25002″ – 24″

**

PRESSURE SEAL

* Dimension center to top in open position.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.

12

®

B

D

A

Class 600 Class 900 Class 1500 Class 2500

inmm

25021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

50024

600

6.501656.751717.251849.25235

13.25337

15.25387

18.75476

20.25514

22.50572

25.50648

B/W45

52

69

132

318

561

996

1451

2216

3089

SEATPORT1.8848

2.2557

2.7570

3.5390

5.001276.671697.751978.75222

10.25260

12.75324

BUTTWELD10.00254

10.00254

15.00381

18.00457

24.00610

29.00737

33.00838

38.00965

40.50102944.501130

6.501656.50165

10.38264

11.50292

15.25387

18.50470

22.25565

24.50662

27.75705

30.25768

B/W55

60

96

172

432

834

1278

1867

3186

4325

SEATPORT1.8848

2.2557

2.7570

3.5390

5.001276.671697.751978.75222

10.25260

12.75324

BUTTWELD10.00254

16.50419

18.50470

21.50546

27.75705

32.75832

39.00991

44.50113049.001257

6.501658.752229.50241

11.25286

14.75375

19.25489

23.50596

27.25692

28.50724

B/W68

87

132

231

543

1027

1698

2235

3483

SEATPORT1.8848

2.2557

2.7570

3.5390

5.001275.501407.001788.75222

10.25260

BUTTWELD10.00254

13.00330

14.00356

17.00432

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

BUTTWELD11.00279

20.00508

22.75578

26.50673

36.00914

40.25102250.00127056.001422

9.132329.50241

11.75298

12.25311

16.50419

20.25514

22.25565

24.75629

B/W87

96

169

312

635

1273

2233

2897

SEATPORT2.2557

2.2557

2.2557

2.8873

3.8899

5.001275.88149

Size A B D Weight A B* D Weight A B* D Weight A B* D Weight

LIFT CHECK VALVESDIMENSIONS & WEIGHTS

Class 600 – 900 – 1500 – 25002″ – 24″

PRESSURE SEAL

* Dimension center to top in open position.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.

13

®

SWING CHECK VALVESDIMENSIONS & WEIGHTS

Class 600 – 900 – 1500 – 25002″ – 24″

Class 600 Class 900 Class 1500 Class 2500

inmm

25021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

50024

600

6.501658.502168.502167.251849.50241

12.25311

13.75349

16.00406

17.25438

18.75476

22.18563

23.37594

29.25743

B/W45

68

70

81

201

476

763

1023

1325

1730

1803

2290

3264

SEATPORT1.7544

2.7570

2.7570

3.0076

5.001276.251597.501919.502419.50241

11.00279

12.50318

14.00356

16.75425

BUTTWELD10.00254

10.00254

12.00305

14.00356

20.00508

26.00660

31.00787

36.00914

39.00991

43.00109243.00109247.00119447.001194

6.501658.502168.502167.501919.50241

12.50316

14.25362

16.50419

16.88429

19.25489

23.00584

23.37594

29.25743

B/W45

68

70

98

246

543

897

1389

1752

2315

3975

5050

7195

SEATPORT1.7544

2.7570

2.7570

3.0076

5.001276.251597.501919.502419.50241

11.00279

12.50318

14.00356

16.75425

BUTTWELD8.50216

10.00254

12.00305

16.00406

22.00559

28.00711

34.00864

39.00991

42.00106747.00119443.00109247.00119447.001194

6.501658.502168.502167.501919.75246

12.50316

13.75349

16.25413

23.80605

29.00737

23.00584

23.37594

29.25743

B/W45

68

132

218

365

684

1263

1752

2950

3200

4170

5305

7395

SEATPORT1.7544

2.7570

2.7570

3.0076

5.001276.251597.501919.502419.50241

11.00279

12.50318

14.00356

16.75425

BUTTWELD8.502168.50216

10.00254

12.00305

18.00457

23.00584

28.00711

32.00813

35.00889

39.00991

43.00109247.00119455.001397

BUTTWELD11.00279

13.00330

14.50368

18.00457

24.00610

30.00762

36.00914

41.00104139.00991

43.00109244.00111848.00121955.001397

6.501656.501658.562177.501919.75246

12.50316

13.75349

16.25413

23.13587

29.62752

25.68652

28.38721

29.25743

B/W45

100

150

301

521

793

1365

2136

3265

3900

7000

7500

13000

SEATPORT1.5038

1.5038

2.2557

2.7570

4.001025.001276.251597.501917.501919.50241

10.50267

11.50292

13.75350

Size A B D Weight A B* D Weight A B* D Weight A B* D Weight

B

D

A

PRESSURE SEAL

* Dimension center to top in open position.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.

14

®

B

D

A

Class 600 Class 900 Class 1500 Class 2500

inmm

25021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

50024

600

6.501658.502168.502167.251849.50241

12.25311

13.75349

16.00406

17.25438

18.75476

22.18563

23.37594

29.25743

B/W45

68

70

81

201

476

763

1023

1325

1730

1803

2290

3264

SEATPORT1.7544

2.7570

2.7570

3.0076

5.001276.251597.501919.502419.50241

11.00279

12.50318

14.00356

16.75425

BUTTWELD10.00254

10.00254

12.00305

14.00356

20.00508

26.00660

31.00787

36.00914

39.00991

43.00109243.00109247.00119447.001194

6.501658.502168.502167.501919.50241

12.50316

14.25362

16.50419

16.88429

19.25489

23.00584

23.37594

29.25743

B/W45

68

70

98

246

543

897

1389

1752

2315

3975

5050

7195

SEATPORT1.7544

2.7570

2.7570

3.0076

5.001276.251597.501919.502419.50241

11.00279

12.50318

14.00356

16.75425

BUTTWELD8.50216

10.00254

12.00305

16.00406

22.00559

28.00711

34.00864

39.00991

42.00106747.00119443.00109247.00119447.001194

6.501658.502168.502167.501919.75246

12.50316

13.75349

16.25413

23.80605

29.00737

23.00584

23.37594

29.25743

B/W45

68

132

218

365

684

1263

1752

2950

3200

4170

5305

7395

SEATPORT1.7544

2.7570

2.7570

3.0076

5.001276.251597.501919.502419.50241

11.00279

12.50318

14.00356

16.75425

BUTTWELD8.502168.50216

10.00254

12.00305

18.00457

23.00584

28.00711

32.00813

35.00889

39.00991

43.00109247.00119455.001397

BUTTWELD11.00279

13.00330

14.50368

18.00457

24.00610

30.00762

36.00914

41.00104139.00941

43.00109244.00118

48.00121955.001397

6.501656.501658.562177.501919.75246

12.50316

13.75349

16.25413

23.13587

29.62752

25.68652

28.38721

29.25743

B/W45

100

150

301

521

793

1365

2136

3265

3900

7000

7500

13000

SEATPORT1.5038

1.5038

2.2557

2.7570

4.001025.001276.251597.501917.501919.50241

10.50267

11.50292

13.75350

Size A B D Weight A B* D Weight A B* D Weight A B* D Weight

TILTING DISK VALVESDIMENSIONS & WEIGHTS

Class 600 – 900 – 1500 – 25002″ – 24″

GATE, GLOBE & CHECK DIRECT SEAL® VALVES

BOLTED BONNET

DESIGN STANDARDS

• Pressure/Temperature: ASME B16.34• API-600• Face-to-Face: ASME B16.10• Flange: ASME B16.5• Butt weld: ASME B16.25

INSPECTION & TESTING

• Shell & Seat: API 598, MSS SP-61, ASME B16.34

MATERIALS

• Pressure containing: Any corrosion resistant high alloy material including Inconel, Monel, Nickel, Hastelloy,Alloy 20, Duplex Stainless.

• Trim: Nace

APPLICATIONS

• Phosgene Isolation• HF Acid• Oxygen Service Valves• Hydrotreater• HPI Industry

®QUALITY VALVES

15

BOLTED BONNET

GATE VALVESClass 150–300–600–900–1500

1/2″ – 48″

16

BODY MATERIAL

• Alloy 20 • Nickel

• Chromes • Stainless Steel

• Hastelloy • Titanium

• Inconel • WCB

• Monel • Special

DESIGN STANDARDS

• Pressure/Temperature: ASME B16.34

• API 600

• Face-to-Face: ASME B16.10

• Flange: ASME B16.5

• Buttweld: ASME B16.25

INSPECTION & TESTING

• Shell & Seat: API 598, MSS SP-61,ASME B16.34

FEATURES AND BENEFITS

• Bonnet and body joint precision machined for accurate fit. Fully enclosed gasket.

• Universal trim constructed in CR13, Hardfaced, 18-8-3M, Monel, Hastelloy, Duplex SS, Alloy 20,and Titanium suitable for all applications.

• Seat face stellited, ground and lapped to a mirrorfinish.

• Non-rotating stem with precision Acme threads andburnished finish.

• Flexible wedge with low center stem-wedge contact, in solid materials ground and lapped to amirror finish. Wedge is tightly guidedto prevent dragging and seat damage.

• Gland is constructed in two pieces for easy alignment.

• Flanges: Class 150-300 1/16″ raised faceClass 600-900-1500 1/4″ raised face

A

D

B

C

®

17

BOLTED BONNET

GATE VALVESDIMENSIONS & WEIGHTS

Class 150 Class 300 Class 600

* Dimension center to top in open position.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.♦ Contact KCA for 900# and 1500# dimensions.

inmm

1/2103/4151

2511/2402

5021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

50022

55024

60026

65028

70030

75032

80034

85036

90042

105048

1200

FLANGE

6.501656.501656.501656.801738.502169.50241

11.12282

12.00305

15.88403

16.50419

18.00457

19.75502

22.50572

24.00610

26.00660

28.00711

30.00762

32.00813

34.00864

36.00914

36.00914

38.00965

40.00101640.00101644.001118

9.002299.002299.00229

14.00356

15.25387

16.62422

18.88480

22.13562

31.00787

37.62956

46.88119156.75144161.38155968.75174673.25186182.88210590.50229996.002438111.002819119.003027

124.253156

130.003302

138.503518

146.683726

166.504229

189.914821

HANDWHEEL

5.001275.001275.001278.002038.002038.00203

10.00254

10.00254

14.00356

18.00457

20.00508

20.00508

24.00610

24.00610

30.00762

30.00762

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

48.00121948.004821

FLG

8

8

8

30

42

50

67

97

180

278

456

646

875

1120

1485

1825

2575

2870

3675

3850

3975

4850

5500

5950

10000

14000

SEATPORT

0.5013

0.7519

1.0025

1.5038

2.0051

2.5064

3.0076

4.001026.001528.00203

10.00254

12.00305

13.25337

15.25387

17.25438

19.25489

21.25540

23.25591

25.25648

27.25692

29.25743

31.25794

33.25845

35.25895

40.25102246.001168

BUTT WELD

4.181064.181064.181067.001788.502169.50241

11.12283

12.00305

15.87403

16.50419

18.00457

19.75502

30.00762

33.00838

36.00914

39.00991

43.00109245.00114349.00124553.00134655.00139760.00152464.00162668.001727

FLANGE

6.501656.501656.501657.501918.502169.50241

11.12283

12.00305

15.87403

16.50419

18.00457

19.75502

30.00762

33.00838

36.00914

39.00991

43.00109245.00114349.00124553.00134655.00139760.00152464.00162668.001727

6.501656.501656.501657.50191

15.25387

16.62422

20.00508

23.38594

32.25819

40.81103749.12124859.38150861.38155968.75174677.88197886.50219794.002388

101.252572

108.502756117.502985

123.813145

128.003251

132.003353

147.813754

HANDWHEEL

5.001275.001275.001278.002038.002038.00203

10.00254

10.00254

14.00356

18.00457

20.00508

20.00508

24.00610

30.00762

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

40.00101648.001219

FLG

8

8

8

35

46

55

90

136

245

415

646

900

1392

1870

2405

3260

3800

4250

5750

6500

7500

9500

11500

13500

SEATPORT

0.5013

0.7519

1.0025

1.5038

2.0051

2.5064

3.0076

4.001026.001528.00203

10.00254

12.00305

13.25337

15.25387

17.00432

19.00483

21.00533

23.00584

25.00635

27.00686

29.00737

31.00787

33.00838

35.00895

40.00101646.001168

BUTT WELD

4.181064.181064.181069.50241

11.50292

13.00330

14.00356

17.00432

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

43.00109247.00119451.00129555.00139755.00139756.00142256.00142256.00142268.00172768.001727

FLANGE

6.501657.501918.502169.50241

11.50292

13.00330

14.00356

17.00432

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

43.00109247.00119451.00129555.00139755.00139756.00142256.00142256.00142268.00172768.001727

9.002299.002299.00229

14.00356

15.38391

18.75476

21.62549

25.87657

36.37924

43.87111449.00124560.87154672.50184282.25208987.062211

102.502604

108.002743114.752915117.502985

120.253061

122.503112

131.253334

139.503543

145.133686

HANDWHEEL

8.002038.002038.002038.002038.00203

10.00254

10.00254

14.00356

20.00508

24.00610

30.00762

30.00762

36.00900

36.00900

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

36.00914

40.00101648.001219

FLG

8

8

8

45

60

89

130

224

394

726

1125

1490

2200

3000

4000

5600

7200

8000

9500

11000

12000

13500

15000

17000

SEATPORT

0.5013

0.7519

1.0025

1.5038

2.0051

2.5064

3.0076

4.001026.001528.00203

10.00254

12.00305

12.88327

14.75375

16.50419

18.25464

20.12511

22.00559

23.75603

25.50648

27.37629

30.50775

32.50826

34.50737

39.00991

46.001168

BUTT WELD

4.181064.181064.181066.501657.001787.501918.002039.00229

10.50267

11.50297

13.00330

14.00356

15.00381

16.00406

17.00432

18.00457

20.00508

20.00508

22.00559

24.00610

24.00610

28.00711

30.00762

30.00762

31.00787

Size A B* C D Weight A B* C D Weight A B* C D Weight

®

BOLTED BONNET

GLOBE VALVESClass 150–300–600–900–1500

1/2″ – 20″

BODY MATERIAL

• Alloy 20 • Nickel

• Chromes • Stainless Steel

• Hastelloy • Titanium

• Inconel • WCB

• Monel • Special

DESIGN STANDARDS

• Pressure/Temperature: ASME B16.34

• Face-to-Face: ASME B16.10

• Flange: ASME B16.5

• Buttweld: ASME B16.25

INSPECTION & TESTING

• Shell & Seat: API 598, MSS SP-61ASME B16.34

FEATURES AND BENEFITS

• Bonnet and body castings are precision machined.One-piece bonnet design for better alignment andfewer parts.

• Bonnet and body joint accurately machined. Fullyenclosed gasket.

• Universal trim constructed in CR13, Hardfaced, 18-8-3M, Monel, Hastelloy, Duplex SS, Alloy 20,and Titanium suitable for all applications.

• Seat face stellited, ground and lapped to a mirrorfinish.

• Flat disc. Body guided floating stem-disc engagement, hardfaced with CR13 Stellite, Duplex SS, or Monel, ground and lapped with seat.

• Tapered disc. Body guided disc, hardfaced withCR13, Stellite, Duplex or Monel, ground and lapped with seat.

• Stem with precision Acme threads and burnished finish.

• Gland is constructed in two pieces for easy alignment.

• Flanges: Class 150-300 1/16″ raised faceClass 600-900-1500 1/4″ raised face

• Impactor handwheels offer the most economicalmechanism for tight shut off. Two lugs cast under the wheel when struck simultaneously, gives significantly greater closing force than standard wheels.

C

B

D

A

18

®

Class 150 Class 300 Class 600

inmm

1/2103/4151

2511/2402

5021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

500

BUTT WELD

2.8873

3.2583

3.5089

5.001278.002038.502169.50241

11.50292

16.00406

19.50495

24.50622

27.50699

31.00787

36.00914

38.50660

38.50660

FLANGE

4.251084.621175.001276.501658.002038.502169.50241

11.50292

16.00406

19.50495

24.50622

27.50699

31.00787

36.00914

38.50660

38.50660

HANDWHEEL

4.001024.001024.001026.001528.00203

10.00254

10.00254

14.00356

24.00610

24.00610

24.00610

24.00610

26.00650

28.00700

36.00914

36.00914

FLG

4

4

4

32

48

54

82

120

240

405

500

1050

1700

2300

2900

3400

SEATPORT

0.5013

0.7519

1.0025

1.5038

2.0051

2.5064

3.0076

4.001026.001528.00203

10.00254

12.00305

13.25337

15.25387

15.50394

17.25438

BUTTWELD

2.8873

3.2583

3.5089

5.00127

10.50267

11.50292

12.50318

14.00356

17.50445

22.00559

24.50622

28.00711

33.00838

34.00863

49.00124554.001372

FLANGE

4.251084.621175.001276.50645

10.50267

11.50292

12.50318

14.00356

17.50445

22.00559

24.50622

28.00711

33.00 838

34.00863

49.00124554.001372

4.501144.501146.601688.10206

15.00381

15.44392

16.88429

19.31491

23.56598

35.88911

39.81101144.06111953.31135457.32145660.00152463.751619

HANDWHEEL

4.001024.001024.001026.001528.00203

10.00254

10.00254

14.00356

24.00610

24.00610

24.00610

26.0065028.00700

30.00762

36.00914

36.00914

FLG

4

4

4

32

45

63

88

130

261

447

1000

1300

1800

2300

3100

3500

SEATPORT

0.5013

0.7519

1.0025

1.5038

2.0051

2.5064

3.0076

4.001026.001528.00203

10.00254

12.00305

13.25337

15.25387

15.50394

17.25438

BUTTWELD

4.001025.001276.001527.00178

11.50292

13.00330

14.00356

17.00432

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

43.00109247.001194

FLANGE

6.501657.501918.502169.50241

11.50292

13.00330

14.00356

17.00432

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

43.00109247.001194

7.902018.10206

10.20259

11.00279

15.00381

17.37441

19.37492

23.00584

31.50800

42.50108047.00119449.00124554.00137656.00142264.00162668.001727

HANDWHEEL

4.001024.001024.001026.00152

10.00254

10.00254

14.00356

24.00610

24.00610

24.00650

24.00650

24.00650

24.00650

36.00914

36.00914

36.00914

FLG

8

11

21

31

60

89

130

213

415

1050

1400

1800

2200

3700

4500

5500

SEATPORT

0.5013

0.7519

1.0025

1.5038

2.0051

2.5064

3.0076

4.001026.001527.882008.77223

10.57268

11.58294

13.25337

14.80376

16.50419

4.501144.501146.601688.10206

15.00381

15.44392

16.88429

19.31491

23.56598

25.75654

35.15892

40.87103853.31135457.32145660.00152

63.751619

Size A B* C D Weight A B* C D Weight A B* C D Weight

19

BOLTED BONNET

GLOBE VALVESDIMENSIONS & WEIGHTS

* Dimension center to top in open position.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.♦ Valves above 6″ are gear operated.♦ Contact KCA for 900# and 1500# dimensions.

®

BOLTED BONNET

SWING CHECK VALVESClass 150–300–600–900–1500

1/2″ – 48″

20

BODY MATERIAL

• Alloy 20 • Nickel

• Chromes • Stainless Steel

• Hastelloy • Titanium

• Inconel • WCB

• Monel • Special

DESIGN STANDARDS

• Pressure/Temperature: ASME B16.34

• Face-to-Face: ASME B16.10

• Flange: ASME B16.5

• Buttweld: ASME B16.25

INSPECTION & TESTING

• Shell & Seat: API 598, MSS SP-61ASME B16.34

FEATURES AND BENEFITS

• Hinge mechanism is totally internal. There are nobody penetrations.

• Body and cover joint are accurately machined witha fully enclosed gasket

• Discs are constructed in a one piece design towithstand the severe shock of check valve service. Hardfaced in CR13, Stellite, Duplex SS, or Monel,ground and lapped to a mirror finish.

• Disc assembly. Discs are secured to the disc hanger with a lock nut and cotter pin. This allowsthe disc to rotate freely in order to prevent localized wear. All parts are easily accessible for servicing.

• Flanges: Class 150-300 1/16″ raised faceClass 600-900-1500 1/4″ raised face

D

A

B

®

21

BOLTED BONNET

SWING CHECK VALVESDIMENSIONS & WEIGHTS

Class 600Class 300Class 150

inmm

1/2153/4201

2511/2402

5021/2653

804

1006

1508

20010

25012

30014

35016

40018

45020

50022

55024

60026

65028

70030

75032

80034

85036

90042

105048

1200

BUTT WELD

4.251084.631185.001276.501658.002038.502169.50241

11.50292

14.00356

19.50495

24.50622

27.50699

31.00787

34.00457

38.50978

38.50978

42.00106751.00129551.00129557.00144860.00152460.00152464.00162677.001956

FLANGE

4.251084.631185.001276.501658.002038.502169.50241

11.50292

14.00356

19.50495

24.50622

27.50699

31.00787

34.00457

38.50978

38.50978

42.00106751.00129551.00129557.00144860.00152460.00152464.00162677.001956

2.5665

2.7570

2.8873

3.5089

5.751466.131567.631948.63219

10.75273

12.75324

15.38391

16.88429

19.63499

22.00559

25.00635

26.50673

28.75730

31.25794

33.50851

36.00914

37.00940

38.50978

39.75101041.881064

CV

95

150

220

410

950

1750

2800

4100

6200

8400

11000

13500

17500

20000

25750

30000

33000

39500

44500

48000

FLG

6

7

8

14

31

35

59

98

179

314

513

602

765

1120

1450

1700

2500

2900

3600

3950

4275

4500

4800

5125

SEATPORT

0.5013

0.7519

1.0025

1.5038

2.0051

2.5064

3.0076

4.001026.001528.00203

10.00254

12.00305

13.25337

15.25387

17.13435

19.00483

21.25540

23.25591

25.25641

27.25692

29.75743

31.25794

33.25945

35.25895

BUTT WELD

6.001527.001788.502039.50229

10.50267

11.50292

12.50318

14.00356

17.50445

21.00533

24.50622

28.00711

33.00838

34.00864

38.50978

40.00101644.00111853.00134653.00134659.00149962.75159468.00172776.00193082.002083

FLANGE

6.001527.001788.502039.502298.502169.50241

11.12283

12.00305

15.87403

16.50419

18.00457

19.75502

30.00 762

33.00838

38.50978

40.00101644.00111853.00134653.00134659.00149962.75159468.00172776.00193082.002083

3.0076

3.1981

3.4487

4.061036.001526.251597.631948.63219

10.75273

12.75324

16.13410

17.00432

19.63499

22.50572

25.00635

26.50673

28.75730

31.25794

33.00838

35.25895

37.00940

38.50978

39.75101041.881064

CV

95

150

220

410

950

1750

2800

4100

6200

8400

11000

13500

17500

20000

25250

29250

33000

41000

46500

53000

FLG

8

13

15

27

37

49

70

110

204

360

582

825

1200

1500

1700

2200

2400

2825

3000

3425

3875

4225

4625

4925

SEATPORT

0.5013

0.7519

1.0025

1.5038

2.0051

2.5064

3.0076

4.001026.001528.00203

10.00254

12.00305

13.25337

15.25387

17.13435

19.00483

21.00533

23.25591

25.00635

27.00686

29.75743

31.00787

33.00838

35.25895

BUTT WELD

11.50292

13.00330

14.00356

17.00432

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

43.00109247.00119451.00129555.00139757.00144863.00160065.00165170.00177876.00193082.002083

FLANGE

11.50292

13.00330

14.00356

17.00432

22.00559

26.00660

31.00787

33.00838

35.00889

39.00991

43.00109247.00119451.00129555.00139757.00144863.00160065.00165170.00177876.00193082.002083

6.251596.381628.632199.13232

11.50292

13.50343

16.37416

18.13461

20.93532

23.38594

24.00610

26.00660

28.75730

30.50775

32.00813

34.25870

36.00914

38.25972

40.75103542.001067

Cv

95

150

220

410

950

1750

2800

4100

5900

7800

9900

12000

15700

18000

22750

26250

30250

39750

45000

50750

SEATPORT

2.0051

2.5064

3.0076

4.001026.001527.88200

10.00254

12.00305

12.88327

14.75375

16.50419

18.25464

20.12511

22.00559

23.75603

25.50648

27.37695

30.50775

32.50826

34.50876

FLG

52

59

96

167

332

525

1000

1500

1750

2400

3200

4500

5500

6400

7300

9275

10500

12100

13300

14750

Size A B* D Weight A B* D Weight A B* D Weight

* Dimension center to top in open position.

Note: ♦ Dimensions, weights and engineering data are subject to change.♦ Other sizes available. Contact KCA for size and dimensions not listed above.♦ Contact KCA for 900# and 1500# dimensions.

®

22

GEAR OPERATOR PNEUMATIC ACTUATOR

ELECTRIC ACTUATOR

Gear operators are usually applied to valves to makethe operation of opening and closing the valveseasier. KITZ uses the bevel gear actuator on valvesabove 16″ 300# due to the size, and weight of thevalve as well as considering the pressure and theflow coefficient of these larger valves.

Gear Sizing: 70% of cold working pressure unlessotherwise specified.50% of cold working pressure for highalloy steels unless otherwise specified.

Pneumatic actuator valve stems serve as a pistonrod with a disc fastened directly to them. Tail rodsare also supplied as standard to serve asposition indicators and for emergency opening.Handwheels and gear heads can be mounted ontop of the cylinder for emergency operation whichmay arise due to loss of air in the cylinder.

Electric actuators may be used on valves of almostany size in various positions and locations.Electric actuators, whether installed directly on anaxle or on a floor stand, can be operated manuallyin case of a power failure.

OPERATOR OPTIONS

®

23

Size KITZ manufactures valves in sizes up to 48″ andpressure classes up to ASME 2500# to meet allyour application needs.

CastingKITZ valves pass the strictest radiographicX-ray analysis.

Engineering KITZ engineers can design valves to conform toyour exact specifications.

InspectionKITZ carefully inspects our valves to ensure defectfree valves for long and reliable service life.

TestingKITZ provides underwater testing to assure leak free service and reliability.

®QUALITY VALVES

ISO 9001 Certified Since 1989

KITZ CORPORATION OF AMERICA10750 CORPORATE DRIVE • STAFFORD TEXAS 77477 U.S.A.

PHONE (281) 491-7333 TOLL FREE (800) 772-0073 FACSIMILE (281) 491-9402

Visit our web site at: www.kitz.com

–– Distributed by ––

CAUTIONPressure-temperature ratings and other performance data publishedin this catalog have been developed from our design calculation, in-house testing, field reports provided by our customers and/orpublished official standards or specifications. They are good only tocover typical applications as a general guideline to users of KITZproducts introduced in this catalog.

For any specific application, users are kindly requested to contactKITZ Corporation for technical advice, or to carry out their own studyand evaluation for proving suitability of these products to such anapplication. Failure to follow this request could result in propertydamage and/or personal injury, for which we shall not be liable.

While this catalog has been compiled with the utmost care, weassume no responsibility for errors, impropriety or inadequacy. Anyinformation provided in this catalog is subject to change withoutnotice for error rectification, product discontinuation, designmodification, new product introduction or any other cause that KITZCorporation considers necessary. This edition cancels all previousissues.

!

®