digitalandoptical_e1300-1194929079_2

7/31/2019 DigitalandOptical_E1300-1194929079_2

1/8

Digital and OpticalMeasuring Test Solutions for NGN

Product Brochure


2/8

MULTI CHANNEL BOX

MT9812B

For Adding Light Sources and Otical Sensorsfor Maximum of 9 Channels

Accepts total of 9 light sources and optical sensors (sold separately) Multi-wavelength WDM light source (1530 1610 nm) GPIB and RS-3C standard I/Fs

The MT981B with multiple DFB-LD light sources supports evalu-ation systems for multi-channel devices. Up to nine MT9810B-compatible light sources (DFB-LD, FP-LD, SLD) and optical sen-sor units can be installed in it.

OpTICAL TEST SET

MT9810B

Multiurose Otical Measuring InstrumentsSuorting D-WDM Light Sources

Integrated light source and optical sensor

+10 dBm high-output light source, 110 dBm high sensitivity sensor

Full line of ITU-T-compliant DFB-LDs supporting D-WDM

High-power +35 dBm sensor for WDM (MA9331A)

The MT9810B Optical Test Set is the most fundamental opticalmeasurement instrument with a complete line-up of light sources(DFB-LD, FP-LD, SLD) and optical sensors (high-speed, general-purpose, high-power).

OpTICAL CHANNEL SELECTORMN9662A/9664A/9672A/9674A1.2 to 1.65 m

For Automatic Switching of Otical paths

Low polarization-dependent Loss (0.03 dBp-p: MN966A/9664A)

Cleanable and replaceable optical adapters (FC, SC, ST, DIN,

HMS-10/A)

The optical channel selector is a switching device used for output-ting the light that is inputted to the common channels to any chan-nel. The above devices are equipped with eight (for MN966A/967A) and sixteen (for MN9664A/9674A) channels, making them

ideal for the evaluation of devices for WDM and various opticaltransmission devices.

OpTICAL SpECTRUM ANALyzERMS9710C600 to 1750 nm

High performance for DWDM OticalCommunications

Wavelength accuracy of 0 pm (C-band) and 50 pm (L-band) Dynamic range of 4 dB (0. nm from peak wavelength), 70 dB (1

nm from peak wavelength)

WDM measurement of wavelength, level, and SNR for up to 300channels

The MS9710C is a diffraction-grating spectrum analyzer for ana-lyzing optical spectra in the 600 to 1750 nm wavelength band. In

addition to uses such as measurement of LD and LED spectra,it has functions for measuring the transmission characteristics ofpassive elements such as optical isolators, as well as NF/Gain ofoptical fiber amplifier systems.

OpTICAL MEASURING INSTRUMENTS


3/83


TUNABLE LASER

Tunics Reference/plus/purit1260 nm to 1640 nm

The New Benchmar in Tunable Laser Sources

Tunics Reference: 5 pm high-wavelength accuracy

Tunics Purity: Ultra-low noise SNR = 90 dB min.

Tunics Plus: Ideal general-purpose tunable light source

Tunics is a tunable light source with the functions and performancerequired for evaluating DWDM systems and devices.

8-CHANNEL MODULAR pLATFORM

OSICS Mainfraime

Ideal for Multi-Channel Testing of DWDM Sstems

Versatile units matching application, including DFB light sources,

tunable light sources, etc.

DWDM Application support

Remote control

The OSICS platform offers the highest flexibility and largest choiceof plug-ins required in fiber-optic system testing, particularly forDense Wavelength Division Multiplexing (DWDM). Up to 8 plug-inmodules can be mixed and matched in a single OSICS mainframe,thus fulfilling all needs for applications requiring multi-wavelengthsources.

TUNABLE OpTICAL CHANNEL DROp UNITXtract1450 nm to 1650 nm

perfect and Unique Tool for Clean SignalExtraction

Signal destination evaluation using accurate channel detection

Tunable band selection from 1450 1650 nm

15 pm wavelength accuracy

Xtract features a square flat-top tunable filter allowing cleanDWDM optical channel extraction.


4/84

ACCESS MASTER

MT9083A0.85/1.3 m (MMF), 0.78/1.31/1.383/1.49/1.55/1.625/1.65 m (SMF)

All-in-One Solution for Otical Fiber Construction andMaintenance of Access, FTTx, LAN and Metro Networks

MT9083A ACCESS Master supports many measurement func-tions and performance required for optical fiber construction andmaintenance in a compact, lightweight, all-in-one unit that elimi-nates the burden of carrying many different test sets and instru-ments on-site.


High resolution and high dynamic range ensure thorough and com

plete fiber evaluation

IP testing option verifies throughput, frame loss and point-to-point

connectivity

Test up to four wavelengths with a single unit-single mode,

multimode or both

MULTI-LAyER NETWORk TESTING pLATFORM

CMA5000

Testing of 1 and 10 Gigabit Ethernet, DWDM,SONET/SDH, OTDR, ORL, pMD and CD Made Simle

Expansive Series of High Performance OTDR Modules for the

CMA5000 Spanning Single Mode, Multimode and Hybrid

Solutions

The CMA5000 Multilayer Network Test Platform is a field meas-uring instrument supporting installation of modules for differentmeasurement objectives.

OpTICAL TIME DOMAIN REFLECTOMETERCMA4500 Series

Full Featured OTDR Designed for all Sill Levels from

a Novice Fault Locator to an Advanced Testing Exert

All-in-one test set with fixed optics reduces complexity and

equipment needed

Dedicated testing modes simplify commonly performed tasks

Sophisticated analysis software provides consistent and ac

curate fiber characterization

CMA 4500 is available as a full featured, cost effective solutionfor those who only require OTDR and Loss Test Set capabilities.This dedicated OTDR offers all of the features and benefits of theCMA5000 with an OTDR module, in a rugged, non-modular pack-age.CMA4500 includes several optics options to cover any testingrequirements from single mode to multimode, from 1 meter to 50km.

NETWORk MASTER SERIES

MT9090A

Unique, purpose-built solution for short fiber applications such as

FTTx drop cables

High resolution and extremely short deadzones ensure thoroughshort fiber evaluation

Unique 780 nm wavelength for in-service maintenance of PONs

without filters

The MT9090A represents a new era in drop cable and premisetesting. Its ease of use, low price, high-resolution and size makethis the perfect product for last mile testing.

purose-Built for Short Fiber Alications

MU909011A Dro Cable Fault Locator Modules


5/85

LOSS TEST SETSCMA50 Series850, 1300, 1310, 1490, 1550, 1625 nm

Ideal for Bi-Directional Testing

Up to 4 sources per unit, out of a single port

High power and stable output for high dynamic range testing and

accurate loss readings

Autowavelength switching provides fast and accurate results

Visual Fault Location source option

LAN Access and network testing option via RJ45 port

Fast and easy-to-use, Anritsus CMA50

line of Loss Test Sets is designed forboth attenuation and power throughputmeasurements on fiber optic links. Theyare offered with common calibrated wave-lengths and connector options to meet anytesting requirement from FTTx networksto long haul telephony links to multimodeLAN, and CATV.

HANDHELD pOWER METERSCMA5 Series850, 1300, 1310, 1490, 1550, 1625 nm

Economical, Accurate and Eas-to-use HandheldUnits

Pocket-sized and rugged design

Multiple calibration wavelengths to address all network

types: datacom, multimedia, WDM as well as FTTx

High input power capacity enables optical amplifier

characterization and multimedia/CATV measurements

The CMA5 Series Power Meters are economical, accurate andeasy-to-use handheld units for attenuation and power throughputmeasurements on point-to-point fiber optic links.

OpTICAL MODULE EMBEDDED TEST SySTEMS

OMETS OTDR

Core OTDR Technolog for an Alication

High dynamic range and superb resolution

Compact size

PCI interface

Ready to install hardware, ready to be accessed software

All of the OMETS are designed for easy hardware integrationwith any standard PC featuring a PCI bus and feature a softwaredevelopers kit (SDK) to initialize and operate the modules. Simplycreate your own user interface, using the included demo utility asa guide, to provide state of the art OTDR performance with yourpersonalized GUI.


OTDR MODULE

MW9077A/A1/A2/B1.31 m (SM)/1.55 m (SM)/1.625 m (SM)

Comact and High-erformance OTDR Module forOtical Fiber Monitoring Sstems

Compact A5-size for monitoring optical fiber systems

Wide operating temperature range

High-performance successor to MW9076 series

Fast data transmission by Ethernet interface

The MW9077A/A1/A/B OTDR Module is ideal for monitoringoptical fiber systems and offers a compact and high-performancesolution for optical fiber applications.


6/86

pULSE pATTERN GENERATORS/ERROR DETECTORS

DIGITAL MEASURING INSTRUMENTS

SIGNAL QUALITy ANALyzER

Mp1800A Series

Small and Flexible Cost-efficient BER Test Solution

SQA series offer suitable BERTS solution for XFP, SFP, PONmodules up to 1.5 Gbit/s, and devices for 43.5G and beyond incombination with MP1803A/04A/11A/1A, MUX and DEMUX.

43.5G MUX/43.5G DEMUX

Mp1803A/Mp1804A25 to 43.5 Gbit/s

For R&D and Manufacturing of 40 Gbit/s Devicesand Transmission Systems

Adopting high resolution variable delay unit (Resolution: 0.1 ps)

High resolution threshold voltage setting suitable for the Q factor

analysis (Resolution: 0.001 V)

Digital display

For various applications with the remote control

The MP1803A 43.5G MUX can multiplex a maximum of fourdata signal inputs (each transmission speed is maximum10.875 Gbit/s) and generate a 43.5 Gbit/s multiplexed signal.The MP1804A 43.5G DEMUX can de-multiplex the 43.5 Gbit/sdata input into four signals.

SONET/SDH/pDH/ATM ANALyzERMp1570A1.5 Mbit/s to 10 Gbit/s

Comprehensive Testing of Core Networks fromOne Compact Portable Analyzer

MD1230 FAMILyMD1230B DATA QUALITy ANALyzERMD1231A1 Ip NETWORk ANALyzER

IP Testing Instruments Changing in Response to Applicationsfor Core, Metropolitan-area, and Access Networks

Portability and 10M to 10G interface support Frame wire-rate sending and real-time traffic analysis Multi-stage VLAN support and tunable clock functions Cost-effective multi-port measurements

Wide frequency band of 0.1 to 1.5 Gbit/s

Differential and single-end interfaces as standard

Long programmable patterns up to 18-Mbits

Burst BER function as standard

Synchronous and asynchronous multi-channel operation

Anritsus MD130 family packs all the functions needed formeasuring network quality, including full-wire-rate packet Tx andRx, into a single, compact unit. The unified operation increases

measurement efficiency and cuts costs.

The MP1570A is a measuring instrument for manufacturing,installing, maintaining, and inspecting SONET/SDH/PDH/ATMequipment and devices. The modular design supports cost-effec-tive customization for target measurements.

All-in-one 1.5M 10G measurements

VC4-64c/OC-19c Concatenation mapping test

ITU-T O.17-compliant Jitter and Wander tests


7/87

NETWORk pERFORMANCE TESTER

Mp1590B/Mp1591A

One Box Tester Supporting Converged Network

All-in-one PDH/DSn/SDH/SONET/OTN/Jitter measurements EoS, virtual concatenation, and LCAS measurements 10/100M, Gigabit, and 10 Gigabit Ethernet measurements Single-system simultaneous measurement of up 18 Ethernet ports

(MP1591A)

40G SDH/SONET ANALyzER

Mp1595A

Multi-bit Rate Measurements up to 40/43G

All-in-one support for PDH/DSn/SDH/SONET/OTN analysis from

1.5M to 43G

APS, Delay, and Through Mode measurements

O.18-compliant Poisson distribution error insertion

Jitter measurement when used with MP1797A

The all-in-one MP1595A 40G SDH/SONET Analyzer has theperformance and functions required for analyzing equipment anddevices supporting PDH, DSn, SDH, SONET, and OTN at bit ratesfrom 1.5M to 43G.

DIGITAL MEASURING INSTRUMENTS

The MP1590B/MP1591A Network Performance Tester can beused to make performance tests and jitter measurements of previ-ous PDH, DSn, SDH/SONET, and OTN-related equipment anddevices as well as OTN, EoS, virtual concatenation, and LCASmeasurements of so-called next-generation networks.

ALL-IN-ONE FIELD TESTERCMA 3000

Installation and Maintenance of Mobile-Access and Fixed-Access Networks, Transmission Networks and Switching

Simultaneous bi-directional monitoring of Mbps lines

Powerful testing of framed Nx64 kbps and unframed Mbps systems

Simultaneous testing of two Mbps lines

Great flexibility through easy-to-install options

10/100/1000 Ethernet Option

CMA 3000 is Anritsus next-generation portable, compact anduser-friendly field tester. Its designed specifically for field techni-cians who install and maintain mobile-access and fixed-accessnetworks, transmission networks and switching.

ETHERNET REFLECTORCMA Ethernet Reflector

Cost Savings Through Single Ended RFC2544Testing

Simple, unattended operation

Battery or AC power

Small size, rugged construction

Full line rate Gigabit Ethernet capability

Interchangeable SFP optics

The Anritsu Ethernet Reflector, used with an IP or Ethernet testset, offers the ability to easily measure throughput, round trip

latency, even RFC suites at almost half the cost of using two testsets.


8/8

Anritsu Corporation5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 JapanPhone: +81-46-223-1111Fax: +81-46-296-1264

U.S.A.Anritsu Company

1155 East Collins Blvd., Suite 100, Richardson,TX 75081, U.S.A.Toll Free: 1-800-267-4878Phone: +1- 972-644-1777Fax: +1-972-671-1877

CanadaAnritsu Electronics Ltd.700 Silver Seven Road, Suite 120, Kanata,Ontario K2V 1C3, CanadaPhone: +1-613-591-2003Fax: +1-613-591-1006

BrazilAnritsu Eletrnica Ltda.Praca Amadeu Amaral, 27 - 1 Andar01327-010-Paraiso-So Paulo-BrazilPhone: +55-11-3283-2511Fax: +55-11-3288-6940

MexicoAnritsu Company, S.A. de C.V.Av. Ejrcito Nacional No. 579 Piso 9, Col. Granada11520 Mxico, D.F., MxicoPhone: +52-55-1101-2370Fax: +52-55-5254-3147

U.K.Anritsu EMEA Ltd.200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.Phone: +44-1582-433200Fax: +44-1582-731303

FranceAnritsu S.A.16/18 avenue du Qubec-SILIC 72091961 COURTABOEUF CEDEX, FrancePhone: +33-1-60-92- 15-50Fax: +33-1-64-46-10-65

Germany

Anritsu GmbHNemetschek Haus, Konrad-Zuse-Platz 181829 Mnchen, GermanyPhone: +49-89-442308-0Fax: +49-89-442308-55

ItalyAnritsu S.p.A.Via Elio Vittorini 129, 00144 Roma, ItalyPhone: +39-6-509-9711Fax: +39-6-502-2425

SwedenAnritsu ABBorgafjordsgatan 13, 164 40 KISTA, SwedenPhone: +46-8 -534-707-00Fax: +46-8-534-707-30

FinlandAnritsu ABTeknobulevardi 3-5, FI-01530 VANTAA, FinlandPhone: +358-20-741-8100Fax: +358-20-741-8111

DenmarkAnritsu A/SKirkebjerg All 90, DK-2605 Brndby, DenmarkPhone: +45-72112200Fax: +45-72112210

SpainAnritsu EMEA Ltd.Oficina de Representacin en EspaaEdificio VeganovaAvda de la Vega, n 1 (edf 8, pl 1, of 8)28108 ALCOBENDAS - Madrid, SpainPhone: +34-914905761Fax: +34-914905762

United Arab EmiratesAnritsu EMEA Ltd.Dubai Liaison OfficeP O Box 500413 - Dubai Internet CityAl Thuraya Building, Tower 1, Suit 701, 7th FloorDubai, United Arab EmiratesPhone: +971-4-3670352Fax: +971-4-3688460

SingaporeAnritsu Pte. Ltd.60 Alexandra Terrace, #02-08, The Comtech (Lobby A)Singapore 118502Phone: +65-6282-2400Fax: +65-6282-2533

IndiaAnritsu Pte. Ltd.India Branch OfficeUnit No. S-3, Second Floo r, Esteem Red Cross Bhavan,No. 26, Race Course Road, Bangalore 560 001, India

Phone: +91-80-32944707Fax: +91-80-22356648

P.R. China (Hong Kong)Anritsu Company Ltd.Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza,No. 1 Science Museum Road, Tsim Sha Tsui East,Kowloon, Hong KongPhone: +852-2301-4980Fax: +852-2301-3545

P.R. China (Beijing)Anritsu Company Ltd.Beijing Representative OfficeRoom 1515, Beijing Fortune Building,No. 5, Dong-San-Huan Bei Road,Chao-Yang District, Beijing 10004, P.R. ChinaPhone: +86-10-6590-9230Fax: +86-10-6590-9235

Korea

Anritsu Corporation, Ltd.8F Hyunjuk Building, 832-41, Yeoksam Dong,Kangnam-ku, Seoul, 135-080, KoreaPhone: +82-2-553-6603Fax: +82-2-553-6604

AustraliaAnritsu Pty. Ltd.Unit 21/270 Ferntree Gully Road, Notting Hill,Victoria 3168, AustraliaPhone: +61-3-9558-8177Fax: +61-3- 9558-8255

TaiwanAnritsu Company Inc.7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817

Specifications are subject to change without notice.

Catalog No. DigitalandOptical-E-A-1- (3.00) Printed in Japan 2007-11 10MBP/E

Please Contact:

071001

Printed on 100%

Recycled Paper

digitalandoptical_e1300-1194929079_2

Documents