digital light processing (dip)
TRANSCRIPT
SRI SHANMUGHACOLLEGE OF ENGINEERING & TECHNOLOGY
SANKARI,SALEM(D.T)
PRESENTED BY,
D.KIRUBASANKAR S.MOHAN
Contents:
IntroductionBasic components in DLPWorking of DLPAdvantagesApplications
IntroductionDLP-Digital Light Processing
Invented by DR.LARRY HORNBECK in 1987
Made by semiconductor material
It consist of One or Three chips methods
It is used in video projector
Basic components of DLPDMD chip (Digital Micromirror Device)
Light source
They are two methods
One chip system Three chip system
One chip systemPasses the light to chip(color wheel)
Three chip systemLight passes through prism
DMD chipIt is a semiconductor material
It is core components,miscroscopic mirror
Matrix of micro mirrors 1024 X 768mm
Size of the mirrors: 16 X 16 um
Light sourceHigh power LEDs or LASER source is used
It contain high pressure xenon arc lampLED based Ordinary LEDs doesn’t produce intensityLASER based• The first commercially LASER based DLP was
introduced in 2008
Working of DLP3-D printing process
Photopolymer resin.
Compare to stereo lithography DLP have much speed
Withstand the tensions and mechanical movement
High intensity LED’s are used
contd..Depending on the application DLP system
accept either digital or analogue signal.
AdvantagesLess maintenance than LCD
Low power consumption
All digital display from DLP chip
It is more reliable
DisadvantagesSome device contain noise
Viewer may have eye strain, headache and migraines.
ApplicationsDLP projectors
Holographic Data Storage
Printed Circuit Board (PCB) Manufacturing
Print Setting
Telephone lines
Future uses of DLPHigh definition image creation
3D visual display