diesel generator set vta28 series enginecummins05.cummins.com/common/systems/cpgkent.nsf... ·...
TRANSCRIPT
Diesel Generator setVTA28 series engine
PowerGeneration
PowerGeneration
Description
This Cummins® Power Generation commercial generatorset is a fully integrated power generation system,providing optimum performance, reliability, and versatilityfor stationary standby, prime power, and continuous dutyapplications.
This generator set is available with CEcertification.
All enclosed products are designed to meetor exceed EU noise legislation 2000/14/ECstep 2006.
This generator set has been designed tomeet or exceed ISO8528 regulation.
This generator set is designed in facilitiescertified to ISO9001 and manufactured in facilities certified to ISO9001 or ISO9002.
Features
Cummins® Heavy-Duty Engine - Rugged 4-cycleindustrial diesel delivers reliable power, low emissionsand fast response to load changes.
Permanent Magnet Generator (PMG) - Offersenhanced motor starting and fault clearing short circuitcapability.
Alternator - Several alternator sizes offer selectablemotor starting capability with low reactance 2/3 pitchwindings; low waveform distortion with non-linear loads,fault clearing short-circuits capability, and class Hinsulation.
Control System - Standard PowerCommand® electroniccontrol provides total system integration including remotestart/stop, precise frequency and voltage regulation,alarm and status message display, AmpSentry protection,output metering, auto-shutdown.
Cooling System - Standard integral set-mountedradiator system, designed and tested for rated ambienttemperatures, simplifies facility design requirements forrejected heat.
Enclosures - Optional weather-protective and sound-attenuated enclosures are available.
Warranty and Service - Backed by a comprehensivewarranty and worldwide distributor network.
Model
C700 D5 706 (565)
825 (660)
N/A
N/A
N/A
603 (754)
640 (512)
750 (600)
N/A
N/A
N/A
545 (681)
DS30-CPGK
DS31-CPGK
N/A
N/A
N/A
DS32-CPGK
C825 D5A
C600 D6
50Hz kVA (kW)
60Hz kW (kVA)
50Hz kVA (kW)
60Hz kW (kVA) 50Hz 60Hz
teehsataDgnitaR emirPgnitaR ybdnatS
Our energy working for you.™
www.cumminspower.com©2010 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation andCummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks ofCummins Power Generation. Other company, product or service names may be trademarks or service marks of others. SS13-CPGK-RevB (03/10).
2000/14/EC
ISO8528
> Specification sheet640kVA - 825kVA 50Hz545kW - 603kW 60Hz
Our energy working for you.™
PowerGeneration
Generator Set Specifications
2G 8258OSI ssalC noitalugeR ronrevoG
%5.0 ± daoL lluF ot daoL oN ,noitalugeR egatloV
%5.0 ± noitairaV egatloV modnaR
suonorhcosI noitalugeR ycneuqerF
%52.0± noitairaV ycneuqerF modnaR
2-6-00016 NE SB / 4-6-00016 NE SBytilibitapmoC CME
Engine Specifications
delooc-retfa dna degrahC obrut ,enil ni ,elcyc 4 ngiseD
).ni5.5( mm7.931 eroB
).ni6( mm4.251 ekortS
)3.ni0171( sretil 82 tnemecalpsiD
rednilyc 21 V°04 ,srenil rednilyc tew elbaecalper htiw nori tsaC kcolB rednilyC
)C°0( F°23 erutarepmet tneibma ta spma 066 yticapaC yrettaB
spma 55 rotanretlA gnigrahC yrettaB
dnuorg evitagen ,tlov 42 egatloV gnitratS
noitcejni tceriD metsyS leuF
rotarapes retaw htiw sretlif leuf no nipS retliF leuF
rotacidni noitcirtser htiw tnemele elbaecalper yrD epyT renaelC riA
wolf lluf ,no-nips eerhT )s(epyT retliF liO ebuL
rotaidar tneibma )C°05( F°221 metsyS gnilooC dradnatS
Alternator Specifications
dleif gnivlover foorp pird ,elop 4 ,sselhsurB ngiseD
Stator 2/3 pitch
csid elbixelf yb delpuoc tceriD rotoR
H ssalC metsyS noitalusnI
Standard Temperature Rise 125°C @ Standby, 105°C @ Prime
)rotareneG tengaM tnenamreP( GMP epyT reticxE
)W( C ,)V( B ,)U( A noitatoR esahP
naf rewolb lagufirtnec evird tceriD gnilooC rotanretlA
AC Waveform T %5 < daol raenil decnalab gnitrotsid noN .%5.1 < daol oN noitrotsiD cinomraH lato
34.22-1GM AMEN rep 05< )FIT( rotcaF ecneulfnI enohpeleT
Telephone Harmonic Factor (THF) <3%
Available Voltages
eniL – eniL / lartueN – eniL zH06eniL – eniL / lartueN – eniL zH05• 110/190 • 220/380 • 110/190 • 139/240 • 255/440
084/772 • 083/022 • 002/511 • 004/032 • 002/511 • 083/032 • 802/021 • 614/042 • 802/021 • 614/042 • 022/721 • 044/552 • 022/721 •
Generator Set Options
*Note: Some options may not be available on all models – consult factory for availability.
Engine• Heavy Duty air filter• Water jacket heater 220/240 v
Cooling• Antifreeze 50/50 (Ethylene glycol)
Enclosure• Sound attenuated canopy
Alternator• Alternator heater• Exciter voltage regulator (PMG)
Control Panel• 3 pole Main Circuit Breaker• 4 pole Main Circuit Breaker
Warranty• 5 years for Standby application• 2 years for Prime application
Silencer• 9 dB attenuation critical silencer• 25 dB residential - delivered loose
Our energy working for you.™
www.cumminspower.com©2010 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation andCummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks ofCummins Power Generation. Other company, product or service names may be trademarks or service marks of others. SS13-CPGK-RevB (03/10).
PowerGeneration
Control System – PCC3100
The PowerCommand™ 3100 Control is a microprocessor-based generator set monitoring, andcontrol system. The control provides an operatorinterface to the genset, digital voltage regulation, digitalgoverning and generator set protective functions.
The PowerCommand™ 3100 generator set control issuitable for use on a wide range of generator sets innonparalleling and paralleling applications.
The PowerCommand™ Control can be configured for anyfrequency, voltage and power connection configurationfrom 120 to13,800 VAC for for 50Hz or 60Hz operation.
Power for the control is derived from the generator setstarting batteries. The control functions over a voltagerange from 8VDC to 35VDC.
Major Features
• Digital Governing and Voltage Regulation, includingdigital overcurrent fault regulation.
• Digital Voltage Regulation with 3-phase sensing.
• AmpSentry™ Protection for true alternator overcurrentprotection.
• Analog and Digital AC Output Metering.
• Battery Monitoring System to sense and warn against aweak battery condition.
• Digital Alarm and Status Message Display.
• Generator set Monitoring: Displays status of all criticalengine and alternator generator set functions.
• Smart Starting Control System: Integrated fuel rampingto limit black smoke and frequency overshoot.
• Advanced Serviceability using InPower™, a PC-basedsoftware service tool.
Control System
Includes all functions to locally or remotely start andstop, and protect the generator set.
Control Switch - RUN/OFF/AUTO
OFF Mode - the generator set is shut down andcannot be started.
RUN mode the generator set will execute its startsequence.
AUTO mode, the generator set can be started with astart signal from a remote device.
LED Indicating Lamps – includes LED indicatinglamps for the following functions:
Not-in-auto mode Common wiringShutdownPhase and scale indicationFault reset switch. Allows the opperator to reset thecontrol after warning or shutdownEmergency stop switch - imediately shuts down thegenerator set operation
Base Engine ProtectionOverspeed shutdownLow Oil Pressure Warning / ShutdownHigh Engine Temperature Warning / ShutdownUnderspeed / Sensor Fail ShutdownFail to Start / Fail to CrankLow / high battery voltage
Options
Integrated PowerCommand Digital Paralleling ControlsKey Type Mode Selector SwitchExhaust Temperature MonitoringPowerCommand NetworkRefer to the PowerCommand Controls Technical Bulletinfor detailed information(S1025C-Non-Paralleling / S1005c-Paralleling)
Our energy working for you.™
www.cumminspower.com©2010 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation andCummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks ofCummins Power Generation. Other company, product or service names may be trademarks or service marks of others. SS13-CPGK-RevB (03/10).
PowerGeneration
Ratings Definitions
Emergency Standby Power (ESP): Applicable for supplying power to varying electrical loadfor the duration of power interruption of a reliable utilitysource. Emergency Standby Power (ESP) is inaccordance with ISO 8528. Fuel Stop power inaccordance with ISO 3046, AS 2789, DIN 6271 and BS5514.
Limited-Time running Power (LTP): Applicable for supplying power to a constant electricalload for limited hours. Limited Time Running Power (LTP)is in accordance with ISO 8528.
Prime Power (PRP): Applicable for supplying power to varying electrical loadfor unlimited hours. Prime Power (PRP) is in accordancewith ISO 8528. Ten percent overload capability isavailable in accordance with ISO 3046, AS 2789, DIN6271 and BS 5514.
Base Load (Continuous) Power (COP): Applicable for supplying power continuously to aconstant electrical load for unlimited hours. ContinuousPower (COP) in accordance with ISO 8528, ISO 3046, AS2789, DIN 6271 and BS 5514.
This outline drawing is to provide representativeconfiguration details for Model series only.
See respective model data sheet for specific modeloutline drawing number.
Do not use for installation design.
Cummins Power Generation
Europe, CIS, Middle East and AfricaManston Park Columbus Ave.Manston RamsgateKent CT12 5BF United KingdomPhone 44 1843 255000Fax 44 1843 255902
Americas1400 73rd Avenue N.E.Minneapolis, MN 55432 USAPhone 763 574 5000 Fax 763 574 5298
Asia Pacific10 Toh Guan Road #07-01TT International TradeparkSingapore 608838Phone 65 6417 2388Fax 65 6417 2399
Model Dim “A” mm Dim “B” mm Dim “C” mm Set weight* dry kg Set weight* wet kg
C700 D5 4047 1608 1942 5491 5760
C825 D5A 4047 1608 2187 5771 6040
C600 D6 4047 1608 1942 5491 5760
*Note: Weights represent a set with standard features. See outline drawings for weights of other configurations.
Our energy working for you.™
www.cumminspower.com©2010 | Cummins Power Generation Inc. | All rights reserved | Specifications subject to change without notice | Cummins Power Generation andCummins are registered trademarks of Cummins Inc. PowerCommand, AmpSentry, InPower and “Our energy working for you.” are trademarks ofCummins Power Generation. Other company, product or service names may be trademarks or service marks of others. SS13-CPGK-RevB (03/10).