diematic power point 2012
TRANSCRIPT
• Founded in 1958 initially to design & build progressive dies
• TS 16949 Certified
• Located in Cleveland, Ohio with 140,000 square feet • 70 employees, an ESOP company, non-union
• Lean Mfg., APQP, PPAP, Kaizen, Continuous Improvement, EDI, ASN’s, etc.
• Asian sourced tooling, weld fasteners, hose clamps, rubber grommets, etc.
• $15+ million in sales, D&B low risk, debt free
• On-site minority owned “A” coat supplier
• Warehousing & assembly capabilities in Mexico
• 99% On-Time Delivery
Innovative Engineering: Defining the Difference
COMPANY HISTORY & OVERVIEW
INDUSTRIES SERVED
W. E. Lott
SOME OF OUR LONG STANDING PARTNERS
AUTOMOTIVE APPLICATIONS
Tooling & Gauging • Progressive dies, deep draw, single hit tooling • Attribute gauges & weld fixtures • In-die taping, clinching & sensors• Prototypes
In-house Design, Automation & Mistake Proofing • Automation & special machine designs• Work cells, poke-a-yoke & vision systems • Solid Edge, Auto Cad, CATIA, IGES, etc.
Stamping Presses• Presses ranging from 30 to 1000 tons• Bed sizes ranging from 24” to 168”• Stock width ranging from 0.250” to 60” • Stock thickness ranging from 0.005” to 0.875”
Value Added Processes & Operations• Spot, resistance, mig & tig welding• Assembly, parts washing, deburring, ETC. • Single hit operations & line dies
Innovative Engineering: Defining the Difference
TOOLING, STAMPING & VALUE-ADDED CAPABILITIES
20 PRESSES FROM 30 TO 1000 TONS
In-houseDeburring
Turntable/Rotary WelderSecondary Clinching
VALUE-ADDED OPERATIONS
CMM
• Attribute & variable gauges
• Advanced bar coding
• APQP, PPAP & FMEA’s
• Gauge calibration
• TS 16949 certified
• Material traceability
QUALITY
MATERIALS• Low carbon & high strength steel• Galvanized & galvanealed• Brass, copper & phosphorous bronze• Stainless steel• Aluminum & aluminized• Zinc & terne plate• Rubber coated metal & metal-plastic-metal• Non-metallics such as siliglas, cardboard, foam, etc.• Clad, layered & pre-coated
VARIOUS MATERIALS & EXTERNAL PROCESSES
EXTERNAL PROCESSES• Zinc plating – rack & barrel• E-coat, powder coating• Phosphate & black oxide• Heat treat & annealing• Anodizing & passivation• Vinyl dip• Plastic & rubber over molding• Decorative chrome plating• Geomet coating• Vapor degreasing• Buffing, grinding & machining• Nickel, tin & cadmium plating
SAMPLING OF PARTS
Innovative Engineering: Defining the Difference
201 East View Drive • Brooklyn Heights, Ohio 44131Phone: 216-749-4656 • Fax: 216-749-1160
www.die-matic.com
THANK YOU!