deutz-fahr agrovector brochure

AGROVECTOR

JLGI101-008_AV_20Seiter_12_GB.indd 1 12.03.13 16:34

Hydrostatic drive with 2 speed changes Max. drive speed 32 km / h 102 HP Constant displacement pump 102 l / min

29.6 / 29.6 LP / 35.7 – HYdROSTATIC

AGROVECTOR TElEHAndlERs:pOwERful, VERsATilE, pROduCTiVE.

Key facts for all versions:

Powerful lifting and productive working with attachments. The hydraulic system keeps the telescopic boom and remote valve supplied with suffi cient oil at all times with a high pump fl ow rate of up to 150 l / min.

Multifunctional: With a wide range of imple-ments to cope with every application.

Versatile manoeuvering: With three steer-ing options (front wheel, all-wheel and crab steering), plus automatic return (on request) of the steering axles to the straight-ahead position, the Agrovector offers outstanding user-friendliness here too.

Secure: A low center of gravity thanks to the engine being located at the side and the tel-escopic arm pivot at the rear.

The Agrovector’s spacious cab is compliant with all applicable safety standards. Relaxed and productive work is guaranteed thanks to the outstanding all-round view and place-ment of controls.

Effi cient and powerful working: The lat-est generation of economical and powerful DEUTZ turbo-diesel engines for powerful working whatever the application.

2


Hydrostatic drive with 2 speed changes Max. drive speed 32 km / h 102 HP Constant displacement pump 102 l / min

29.6 / 29.6 LP / 35.7 – HYdROSTATIC


Key facts for all versions:

Powerful lifting and productive working with attachments. The hydraulic system keeps the telescopic boom and remote valve supplied with suffi cient oil at all times with a high pump fl ow rate of up to 150 l / min.

Multifunctional: With a wide range of imple-ments to cope with every application.

Versatile manoeuvering: With three steer-ing options (front wheel, all-wheel and crab steering), plus automatic return (on request) of the steering axles to the straight-ahead position, the Agrovector offers outstanding user-friendliness here too.

Secure: A low center of gravity thanks to the engine being located at the side and the tel-escopic arm pivot at the rear.

The Agrovector’s spacious cab is compliant with all applicable safety standards. Relaxed and productive work is guaranteed thanks to the outstanding all-round view and place-ment of controls.

Effi cient and powerful working: The lat-est generation of economical and powerful DEUTZ turbo-diesel engines for powerful working whatever the application.

2


Powershift drive with 4F / 3R speed changes

Max. drive speed 40 km / h Optional 123 HP engine with

6F / 3R speed changes available Load sensing pump 150 l / m

37.6 / 37.7 – POWERSHIFT


Agrovector models 29.6 29.6 LP 35.7 37.6 37.7

Hydrostatic X X X – –

Powershift – – – X X

Max. lifting height (m) 6 7 6 7

Max. lifting force (kg) 2,900 3,500 3,700

3


4

HiGH lifTinG pOwER wHATEVER THE TERRAin And TAsk.

In many agricultural businesses an in-creasing number of special machines are required for specific tasks in addition to tractors. The telescopic loader is the eco-nomical helping hand for productive mate-rial handling with farmers and contrac-tors. It is not only suitable for handling crops, but can also be used for a great variety of other tasks.

Although the Agrovector was designed especially for agricultural use, its flex-ibility and manoeuverability means that it is also a professional solution for market and landscaping gardening businesses and municipal work.

Economical and powerful enginesThe latest generation of economical and

powerful DEUTZ turbo-diesel engines provide efficient and maximum power for all tasks.

Convenient driveThe 29.6 / 29.6 LP and 35.7 models of the Agrovector have a hydrostatic drive with two speed stages. The maximum speed is 32 km / h. The two larger Agrovector models – the 37.6 and 37.7 – come with a rugged new PowerShift transmission standard equipped with a 4 / 3 (optional 6 / 3) speed ranges offering a maximum speed of 40 km / h.

Powerful hydraulicsThe hydraulic system with a system pres-sure of 250 bars not only provides high

lifting power, but also sufficient power to external services. The smaller mod-els are equipped with a standard con-stant displacement pump with a delivery rate of up to 102 l / min. A load-sensing pump is standard. The larger 37.6 / 37.7 models are equipped with a load-sensing pump with a delivery rate of 150 l / min as standard.

Versatility in operationThe DEUTZ-FAHR Agrovector is a ver-satile and universal telescopic loader designed for productive work on a wide range of agricultural assignments thanks to a large range of external consumers. The powerful hydraulic system and the economical engines make the Agrovector an irreplaceable aid.

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


4

HiGH lifTinG pOwER wHATEVER THE TERRAin And TAsk.

In many agricultural businesses an in-creasing number of special machines are required for specific tasks in addition to tractors. The telescopic loader is the eco-nomical helping hand for productive mate-rial handling with farmers and contrac-tors. It is not only suitable for handling crops, but can also be used for a great variety of other tasks.

Although the Agrovector was designed especially for agricultural use, its flex-ibility and manoeuverability means that it is also a professional solution for market and landscaping gardening businesses and municipal work.

Economical and powerful enginesThe latest generation of economical and

powerful DEUTZ turbo-diesel engines provide efficient and maximum power for all tasks.

Convenient driveThe 29.6 / 29.6 LP and 35.7 models of the Agrovector have a hydrostatic drive with two speed stages. The maximum speed is 32 km / h. The two larger Agrovector models – the 37.6 and 37.7 – come with a rugged new PowerShift transmission standard equipped with a 4 / 3 (optional 6 / 3) speed ranges offering a maximum speed of 40 km / h.

Powerful hydraulicsThe hydraulic system with a system pres-sure of 250 bars not only provides high

lifting power, but also sufficient power to external services. The smaller mod-els are equipped with a standard con-stant displacement pump with a delivery rate of up to 102 l / min. A load-sensing pump is standard. The larger 37.6 / 37.7 models are equipped with a load-sensing pump with a delivery rate of 150 l / min as standard.

Versatility in operationThe DEUTZ-FAHR Agrovector is a ver-satile and universal telescopic loader designed for productive work on a wide range of agricultural assignments thanks to a large range of external consumers. The powerful hydraulic system and the economical engines make the Agrovector an irreplaceable aid.

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


Compact, manoeuverable telescopic loader with improved all-round view and very spacious, comfortable cab

Low center of gravity due to the side-mounted engine and rear telescopic boom pivot

Five models fitting every need. Three models with 2-range hydrostatic drive and two models with PowerShift transmission with 4 forward / 3 reverse speed ranges depending on the model. 6-speed PowerShift transmis-sion is optional available

Joystick operation

Heavy duty durable axles and permanent 4-wheel-drive

Limited slip differential in the front axles

AdVAnTAgESPr

inte

d in

Ger

man

y

Prin

ted

in G

erm

any


pOwERful sAVinGs.

6

Telescopic loaders are regularly used un-der tough conditions. When moving heavy loads, the engine and drive train have a lot to cope with.

Economical engineAll Agrovector models are equipped with dependable DEUTZ turbo-diesel engines.

These modern, 4-cylinder, liquid-cooled engines have an excellent constant output. Equipped with a high-pressure injection sys-tem the latest generation of Tier IVi / Stage IIIb DEUTZ engine offer less fuel consump-tion and open after treatment system which requires no servicing of stand still regener-ation. The engine is standard equipped with

a reversible fan which enables operators to clear dust from the engine.

Constant engine performanceThe engines are optimised for the use in agricultural environments. With a constant output over a wide speed and torque range they offer enough power for

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


pOwERful sAVinGs.

6

Telescopic loaders are regularly used un-der tough conditions. When moving heavy loads, the engine and drive train have a lot to cope with.

Economical engineAll Agrovector models are equipped with dependable DEUTZ turbo-diesel engines.

These modern, 4-cylinder, liquid-cooled engines have an excellent constant output. Equipped with a high-pressure injection sys-tem the latest generation of Tier IVi / Stage IIIb DEUTZ engine offer less fuel consump-tion and open after treatment system which requires no servicing of stand still regener-ation. The engine is standard equipped with

a reversible fan which enables operators to clear dust from the engine.

Constant engine performanceThe engines are optimised for the use in agricultural environments. With a constant output over a wide speed and torque range they offer enough power for

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


7

Reliable, powerful and economic Tier IV / Stage IIIb dEUTZ turbo-diesel en-gines developing 75 kW (102 hp); a 90 kW (123 hp) engine is available as an option

The engines in 37.6 and 37.7 models offering up to 10 % fuel savings

Fuel tank with a capacity of up to 150 l

Maximum drivespeed of 40 km / h

AdVAnTAgES

rugged tasks. Durability and long-term reliability are also important features: The inlet and exhaust valves are con-tinuously rotated to minimize wear and the undersides of the pis ton heads are sprayed with cooling oil from special noz-zles. Both water and oil coolers are also combined in one unit.

Always the right transmissionThe hydrostatic drive in the Agrovector 29.6 and 35.7 has two forward and reverse speed ranges that can be easily shifted under load with the lever on the steering wheel; the direction of travel is also select-ed here. The accelerator pedal is used to control the engine and traveling speed.

The PowerShift transmission in the 37.6 and 37.7 models has 4 forward and 3 reverse speed ranges, which can be easily controlled through the single-lever joystick category and is notable for low losses.

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any

The engine hood opens up to give fully access to the engine and its components enabling greater accessibility allowing for easier maintenance.

The new dEUTZ TIER IIIb turbo-intercooler engine operates economically even under heavy working conditions and is equipped as standart with a reversing fan.


dRiVERs will lOVE THis CAb.

8

despite its streamlined design, the Agrovector’s cab is one of the most spa-cious in its class; the driver has plenty of space to sit and work in comfort. The controls – as in all dEUTZ-FAHR ma-chines – pose no confusing questions. driv-ers will find their way around enjoying a comfortable work environment and en-hancing every day productivity.

Spacious cabThe cab of the Agrovector meets all the requirements of applicable safety standards. The driver is protected in

the practical and spacious cab, having ROPS / FOPS protection, with good, all-round visibility and an operator friendly environment.

Optimum lightingIn addition to the two main headlights, the two optional working lights at the front of the cab, two at the rear of the cab and two on the boom, enhance safer operation during night work or in poorly illuminated buildings.

It gets everywhereWith a height of just 1.99 m, the Agrovec-tor 29.6 LP with low cab can move through low entrances.

Efficient noise reductionThe cab of the Agrovector is also well in-sulated against noise, heat and dust. This is achieved thanks to basic design features such an engine with reduced noise emission and through exclusion of noise-emitting and noise-transferring components from the cab. The cab itself also features a filter that effectively excludes dust.

The spacious cab offers drivers the room they need to be productive. Improved panoramic view with optional screen guard protection.

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


dRiVERs will lOVE THis CAb.

8

despite its streamlined design, the Agrovector’s cab is one of the most spa-cious in its class; the driver has plenty of space to sit and work in comfort. The controls – as in all dEUTZ-FAHR ma-chines – pose no confusing questions. driv-ers will find their way around enjoying a comfortable work environment and en-hancing every day productivity.

Spacious cabThe cab of the Agrovector meets all the requirements of applicable safety standards. The driver is protected in

the practical and spacious cab, having ROPS / FOPS protection, with good, all-round visibility and an operator friendly environment.

Optimum lightingIn addition to the two main headlights, the two optional working lights at the front of the cab, two at the rear of the cab and two on the boom, enhance safer operation during night work or in poorly illuminated buildings.

It gets everywhereWith a height of just 1.99 m, the Agrovec-tor 29.6 LP with low cab can move through low entrances.

Efficient noise reductionThe cab of the Agrovector is also well in-sulated against noise, heat and dust. This is achieved thanks to basic design features such an engine with reduced noise emission and through exclusion of noise-emitting and noise-transferring components from the cab. The cab itself also features a filter that effectively excludes dust.

The spacious cab offers drivers the room they need to be productive. Improved panoramic view with optional screen guard protection.

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


2

1

Large glazed areas and improved panoramic view

Large windscreen extending into the roof allows view of the telescopic boom and attachments; screen guard available as an option

An operator friendly designed workplace with controls providing comfortable and productive work environment

Pressurized cab with fi lter for dust and contaminants

Low noise levels due to all-round silencing measures

Agrovector 29.6 LP available with low cab, with an external height of less than 2 m

AdVAnTAgES

Comfortable driver’s seatThe driver‘s suspension seat features a number of adjustment options, and, com-bined with the variable angle of the steer-ing column ensures the driver sits in a re-laxed and favorable orthopedic position. A pneumatic suspension seat is available as an option.

Excellent atmosphereA powerful heating and ventilation system provides a pleasant and constant cab at-mosphere. An air conditioning system is available as an option.

Anti-TheftAll telehandler models are equipped with an anti-theft feature. When active, the Agrovector requires entering a numeric code before operation, preventing unau-thorised use. The code entry is accom-plished using the display and keypad.

Reversing the driving direction on the hydrostatic mod-els is activated with the lever below the steering wheel.

An optional airconditioning provides a pleasant cab climate.The comfortable armrest assists drivers during joystick operation and helps reduce fatigue in arms and shoulders.

The joystick operates boom, attachment and travel functions on the models with PowerShift.

The InfoCenter (1) keeps the driver up to date with all important operating data at-a-glance. All functions are easy to change and can be adjusted with the control panel (2).

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


pOwERful lifTinG.

10

Class leading traction coupled with high lift-ing forces ensures fast loading. With its pow-erful hydraulic system and the innovative tel-escopic boom geometry the Agrovector cuts a fine figure everywhere it goes. Equipped with an open-center hydraulic system with a flow rate of 102 l / min, or with a load-sensing pump with 150 l / min (depending on the mod-el), it not only guarantees fast lifting capabili-ties but also allows operators to use a variety of attachments.

Strong BoomThe telescopic boom comprises two sec-tions which are controlled with sliding

wear pads. The maximum working height is 7.30 m, which provides a tipping height of more than 6.00 m with a light goods bucket attachment. The maximum lifting force of the Agrovector models ranges from 2.9 to 3.7 tons.

Intelligent designAgrovector telescopic booms have an intel-ligently designed boom, providing comfort during operation. While activated and trave-ling 5 km / h or faster over uneven terrain, the boom ride function provides cushioning for the load. Additionally the main lift cylin-der on the Agrovector can be released into

a floating mode by using a button positioned on the rear of the joystick. This allows at-tachments to flexibly move over less smooth work surfaces. The boom float mode can be combined with the boom ride function.

Remote valvesThe Agrovector is equipped standard with a double-acting remote valve on the tel-escopic boom. An additional double-acting remote valve can be mounted at the rear if required. Both can be conveniently op-erated with the joystick. Lock-valves are standard on the hydraulic cylinders to keep the pressure in case of a failure.

Prin

ted

in G

erm

any


pOwERful lifTinG.

10

Class leading traction coupled with high lift-ing forces ensures fast loading. With its pow-erful hydraulic system and the innovative tel-escopic boom geometry the Agrovector cuts a fine figure everywhere it goes. Equipped with an open-center hydraulic system with a flow rate of 102 l / min, or with a load-sensing pump with 150 l / min (depending on the mod-el), it not only guarantees fast lifting capabili-ties but also allows operators to use a variety of attachments.

Strong BoomThe telescopic boom comprises two sec-tions which are controlled with sliding

wear pads. The maximum working height is 7.30 m, which provides a tipping height of more than 6.00 m with a light goods bucket attachment. The maximum lifting force of the Agrovector models ranges from 2.9 to 3.7 tons.

Intelligent designAgrovector telescopic booms have an intel-ligently designed boom, providing comfort during operation. While activated and trave-ling 5 km / h or faster over uneven terrain, the boom ride function provides cushioning for the load. Additionally the main lift cylin-der on the Agrovector can be released into

a floating mode by using a button positioned on the rear of the joystick. This allows at-tachments to flexibly move over less smooth work surfaces. The boom float mode can be combined with the boom ride function.

Remote valvesThe Agrovector is equipped standard with a double-acting remote valve on the tel-escopic boom. An additional double-acting remote valve can be mounted at the rear if required. Both can be conveniently op-erated with the joystick. Lock-valves are standard on the hydraulic cylinders to keep the pressure in case of a failure.

Prin

ted

in G

erm

any


Robust, two-section telescopic boom with proportional control and compensation cylinder

Powerful hydraulic system with high degree of effi ciency and fl ow rate

Proportional remote valve at the rear available as an option

Lifting height up to 7.30 m

Z-bar tilt cylinder linkage improves clycle time and allows for 150 ° coupler rotation

Soft boom stop slows boom movement near the end of travel

Lifting force up to 3.7 t

displays for angle and lift enhance operation

AdVAnTAgES

A load stability indicator meeting En15000 standard, assists drivers on placing load and enhan-ces operation.

When working in rough terrain, the boom fl oat function keeps the bucket suspended to follow the ground surface.

driving in rough terrain is due to the suspended boom also very comfortable and smooth.

The boom suspension for the telescopic boom guarantees a smoother ride during transportationon rougher terrain.

The remote valves for the working hydraulics offer proportional control.

BOOM FLOAT FUnCTIOn BOOM RIdE FUnCTIOn

Additional hydraulic valves, two at the boom and two at the rear offer operation comfort for complex tools.

Prin

ted

in G

erm

any


GETs EVERywHERE EAsily.

12

High manoeuvrability and compact di-mension are key assets of the Agrovector telescopic handler range. All five models are equipped with constant four-wheel-drive and three different steering modes which guarantee highest flexibility and multi purpose use.

Robust designUsing a telescopic loader means you also need a good view. This aspect was given special attention when the Agrovector was designed. The engine is mounted on the side of the machine; the pivot point of the boom is at the rear. This has a number of important advantages:

The centre of gravity of the machine is shifted to its centre and the telescopic boom does not impede the driver‘s view to the right.

Three steering modesThe three steering modes are activated simply with a pushbutton – front-axle,

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


GETs EVERywHERE EAsily.

12

High manoeuvrability and compact di-mension are key assets of the Agrovector telescopic handler range. All five models are equipped with constant four-wheel-drive and three different steering modes which guarantee highest flexibility and multi purpose use.

Robust designUsing a telescopic loader means you also need a good view. This aspect was given special attention when the Agrovector was designed. The engine is mounted on the side of the machine; the pivot point of the boom is at the rear. This has a number of important advantages:

The centre of gravity of the machine is shifted to its centre and the telescopic boom does not impede the driver‘s view to the right.

Three steering modesThe three steering modes are activated simply with a pushbutton – front-axle,

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


13

Separate hydraulic steering pump

Automatic differential lock in the front axle

Triple steering mode with a turning circle under 7 m

High ground clearance with up to 460 mm (depending on model and tyre dimensions)

Power assited braking system with enclosed oil disc brakes at the front axle

AdVAnTAgES

The desired steering option is easy to select using the membrane keys in the cab. The wheels return automatically to the straight-ahead position.

Front-wheel steering

All-wheel steering The low center of gravity and high ground clearance also ensure improved working conditions in the fi eld.

all-wheel and crab steering. These fea-tures make the Agrovector an agile machine. Coupled with a tight steering angle of 56°, this telescopic loader can be easily manoeuvred around confi ned stockyards and buildings. The Agrovec-tor 37.6 and 37.7 models are equipped with a self alignment steering system as

standard; for the 29.6 and 35.7 models this feature is optional.

High ground clearanceThe Agrovector’s high ground clearance, with a low center of gravity and 4-wheel drive, is a particular advantage travers-ing rough terrain.

BrakingThe rugged heavy duty axles offer en-closed oil disc brakes at the front and rear. The braking system is a power assisted hydraulic system. The parking brake is a dry disc with transmission disconnect.

Crab steering

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


fiTTEd quiCkly.sERViCEd quiCkly.

Prin

ted

in G

erm

any

Hook for pallet fork. Crane boom. Concrete skip (volume: 500 l).

Light goods bucket (volume: 2 m3). Mechanical pallet fork. Hydraulic pallet fork (± 100 mm lateral tilt).

grab bucket (volume: 1 m3). 4-in-1 grab bucket (volume: 1 m3). Wrapped bale gripper.

Bale gripper. Large bale fork. Quick-change frame with hydraulic implement lock.


fiTTEd quiCkly.sERViCEd quiCkly.

Prin

ted

in G

erm

any

Hook for pallet fork. Crane boom. Concrete skip (volume: 500 l).

Light goods bucket (volume: 2 m3). Mechanical pallet fork. Hydraulic pallet fork (± 100 mm lateral tilt).

grab bucket (volume: 1 m3). 4-in-1 grab bucket (volume: 1 m3). Wrapped bale gripper.

Bale gripper. Large bale fork. Quick-change frame with hydraulic implement lock.


Prin

ted

in G

erm

any

1

3

2

4

Long maintenance intervals lower operating costs considerably

Fully opening hood for improved access

Tool-free access to all important maintenance points

Engine oil change every 500 hours; hydraulic oil change every 1,500 hours

grouped grease points

Versatile optional attachment range for all jobs

AdVAnTAgES

daily servicing requires little effort; sim-ply fold back the hood which opens out widely. A hydraulic cylinder keeps it in the open position. All daily maintenance components and assemblies are easily accessible without tools for simple main-tenance work. To ease the daily mainte-nance all grease points are grouped and easy to access. A separate compartment is dedicated to the transmission and hy-draulics. The driver can also check the machine status with an analyser.

Long maintenance intervalsThe regular engine maintenance inter-vals are long – in fact uniquely long. The engine oil only requires changing every 500 hours of operation and the hydraulic oil and its fi lters only require changing every 1,500 working hours. The opera-ting costs of the Agrovector are there-fore satisfyingly low.

1 The engine air fi lter is easily accessi-ble. Due to the cyclone dust separator and the standard-feature safety fi lter the maintenance intervals of the fi lter are very long.

2 The oil fi ller inlet and dipstick are easily accessible. Long maintenance in-tervals mean lower operating costs for servicing and maintenance.

3 The cab air fi lter is easily accessible behind the driver‘s door. The fi lters can be cleaned and replaced without tools.

4 Analyzer functionality. With the help of a special analyser that can be connected inside the cabin, machine diagnostics can be read.

Quick-change frame with hydraulic implement lock.


pERsOnAlisE yOuR AGROVECTOR.

Prin

ted

in G

erm

any

A full set of working lights makes operating safer during bad light conditions.

Many tyre options are available. Auxiliary valves at the rear and at the boom ensure the work with complex tools.

Air-conditioned cab.

Automatic trailer hitch with latching rail.

Protection shields.

Hydraulically adjustable hitch.

The optimum solution for low entrances: the low profi le cab with an external height of just 1.99 m.

Hydraulic pick-up hitch.


pERsOnAlisE yOuR AGROVECTOR.Pr

inte

d in

Ger

man

y

A full set of working lights makes operating safer during bad light conditions.

Many tyre options are available. Auxiliary valves at the rear and at the boom ensure the work with complex tools.

Air-conditioned cab.

Automatic trailer hitch with latching rail.

Protection shields.

Hydraulically adjustable hitch.

The optimum solution for low entrances: the low profi le cab with an external height of just 1.99 m.

Hydraulic pick-up hitch.


sTAndARd & OpTiOnAl EquipmEnT.

Prin

ted

in G

erm

any

• = Available, X = not available, = Optional, = to be announced

Product differentiation, Options and Features 29.6 29.6 LP 35.7 37.6 37.7

Cab Features

ROPS and FOPS fully glazed all weather Ag cab, compliant AG tractor safety standards • • • • •

Premium cab with A / C

Premium plus cab with A / C; deluxe cloted suspension seat; cab floodlights X X X

Air suspension seat • •

Cab flood lights

Single lever electro-hydraulic control joystick • • • • •

Column mounted FnR lever • • • X X

Joystick mounted FnR operation X X X • •

Bucket mode switch (for faster hydraulic response in bucket application) • • • • •

Load Stability Indicator (LSI) with auto cut out and override function • • • • •

Integrated on board analyzer • • • • •

Electronic Anti-Theft device • • • • •

Front and roof screen guards

Boom & Carriage

Standard carriage 4,000 kg & forks with 500 mm load centre • • • • •

Side shift carriage 4,000 kg cap

Boom angle indicator at cab display (with boom soft stop function) • • • • •

Adjustable / Continous hydraulic auxiliary function independent from joystick • • • • •

Mechanical coupler • • • • •

Hydraulic quick switch coupler

Boom worklights • •

Boom float function X X X • •

Boom ride cushioning controls X X X • •

Intelligent boom suspension X X X • •

2nd Auxiliary to boom head

Power & Transmission

Stage IIIA DEUTZ TCD 2012, 74.9 kW (102 Hp) at 2,100 rpm - 2 speed hydrostatic • • • X X

Stage IIIB DEUTZ TCD 3.6 L4 - 74.4 kW (102 Hp) at 2,200 rpm, 410 Nm at 1,600 rpm - 4 speed X X X • •

Stage IIIB DEUTZ TCD 3.6 L4 - 90 kW (123 Hp) at 2,200 rpm, 470 Nm at 1,600 rpm - 6 speed X X X

Hydraulic system Load Sensing type with Gear pump 102 l / min • • • X X

Hydraulic system Load Sensing type with Piston pump 102 l / min X X

Hydraulic system Load Sensing type with Piston pump 150 l / min (60 cc) X X X • •

Hydraulic driven programable reversible fan X X X • •

Four wheel drive • • • • •

Four wheel steer / Two wheel steer / Crab steer with pushbutton select facility • • •

Automatic steering alignment • •

Functional Equipment & Accessories

Rotating beacon

Rear hitch (different versions available)

Rear hydraulic trailer brakes

Trailer electrics

Work tools (selection)

Mitas 15.5 / 80 - 24 16 ply

Michelin 400 / 80 24 Power CL

Michelin 440 / 80 R 24 Power CL

Michelin 460 / 70 R 24 XMCL

Michelin 500 / 70 R 24 XMCL

Goodyear 15.5 - 25 SGL

17


TECHniCAl dATA.

18

Type designation 29.6 29.6 LP 35.7 37.6 37.7

Engine

Type DEUTZ TCD 2012 – 4 Cylinder DEUTZ TCD 3.6 L 4

Max. power at 2,200 rpm kW / hp 75 / 102 90 / 123

Fuel reserves l 95 102 150

Engine oil l 10.4 8

Coolant l 17.5 25

Cab

Air conditioning Option

Transmission

Drive Four-wheel

Number of ranges (forwards / reverse) Hydrostatic 2 / 2 Powershift (4 / 3) with Powershuttle

Automatic differential lock 45 %

Max. speed – first gear km / h 10 7

Max. speed – top gear km / h 32 40

Chassis, steering, brakes

Steering Front axle, all-wheel, crab steering

Braking system Wet disk brakes

Tyres 405 / 70 R 20 15.5 / 80 - 24 16 PR

Hydraulic system

Hydraulic system l / min 102 / LS pump as an option 150 LS pump

Operating system pressure bar 250

Hydraulic oil volume l 64 95.5 80

Remote valves 1, double-acting

dimensions

Overall height mm 2,350 1,990 2,450 2,323 2,385

Overall width mm 2.110 2,330 2,382

Cab width inside mm 890 920

Track width mm 1,633 1,893 1,988

Wheel base mm 2,690 2,980 2,950 3,050

Length to front wheels mm 3,800 4,230 4,253 4,679

Length to mounting frame mm 4,360 5,020 4,621 5,153

Ground clearance mm 340 310 460 430

Turning radius on wheels mm 3,650 3,900 3,700 3,750

Turning radius on the pallet fork mm 4,700 4,900 4,670 4,740

Unladen weight (with pallet fork) kg 6,060 7,400 7,590 8,160

Unloaded weight

Max. lifting force kg 2,900 3,500 3,700

Lifting force at max. height kg 2,200 2,600 2,500 2,000

Max. reach at front m 3.16 3.90 3.11 3.76

Lifting capacity at max. reach at front kg 1,000 1,350 1,500

Lifting height m 5.80 6.90 6.10 7.30

Reach at max. height m 0.80 0.90 0.60 0.50

Bite force with standard bucket kN 34,8 55 55 65

Carriage rotation ° 143 149

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


TECHniCAl dATA.

18

Type designation 29.6 29.6 LP 35.7 37.6 37.7

Engine

Type DEUTZ TCD 2012 – 4 Cylinder DEUTZ TCD 3.6 L 4

Max. power at 2,200 rpm kW / hp 75 / 102 90 / 123

Fuel reserves l 95 102 150

Engine oil l 10.4 8

Coolant l 17.5 25

Cab

Air conditioning Option

Transmission

Drive Four-wheel

Number of ranges (forwards / reverse) Hydrostatic 2 / 2 Powershift (4 / 3) with Powershuttle

Automatic differential lock 45 %

Max. speed – first gear km / h 10 7

Max. speed – top gear km / h 32 40

Chassis, steering, brakes

Steering Front axle, all-wheel, crab steering

Braking system Wet disk brakes

Tyres 405 / 70 R 20 15.5 / 80 - 24 16 PR

Hydraulic system

Hydraulic system l / min 102 / LS pump as an option 150 LS pump

Operating system pressure bar 250

Hydraulic oil volume l 64 95.5 80

Remote valves 1, double-acting

dimensions

Overall height mm 2,350 1,990 2,450 2,323 2,385

Overall width mm 2.110 2,330 2,382

Cab width inside mm 890 920

Track width mm 1,633 1,893 1,988

Wheel base mm 2,690 2,980 2,950 3,050

Length to front wheels mm 3,800 4,230 4,253 4,679

Length to mounting frame mm 4,360 5,020 4,621 5,153

Ground clearance mm 340 310 460 430

Turning radius on wheels mm 3,650 3,900 3,700 3,750

Turning radius on the pallet fork mm 4,700 4,900 4,670 4,740

Unladen weight (with pallet fork) kg 6,060 7,400 7,590 8,160

Unloaded weight

Max. lifting force kg 2,900 3,500 3,700

Lifting force at max. height kg 2,200 2,600 2,500 2,000

Max. reach at front m 3.16 3.90 3.11 3.76

Lifting capacity at max. reach at front kg 1,000 1,350 1,500

Lifting height m 5.80 6.90 6.10 7.30

Reach at max. height m 0.80 0.90 0.60 0.50

Bite force with standard bucket kN 34,8 55 55 65

Carriage rotation ° 143 149

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


19

Agrovector 29.6 · 29.6 LP

Agrovector 37.6

Agrovector 35.7

Agrovector 37.7

m

7

6

5

4

3

2

1

m

7

6

5

4

3

2

1

3 2 1 0

60 ̊

50 ̊

40 ̊

30 ̊

20 ̊

10 ̊

0 ̊

2.900 kg

1.00

0 kg 1.

400

kg 1.80

0 kg 2.20

0 kg

2.60

0 kg

m

7

6

5

4

3

2

1

m

7

6

5

4

3

2

1

3 2 1 0

50 ̊

40 ̊

30 ̊

20 ̊

10 ̊

0 ̊

1.50

0 kg 2.00

0 kg 2.

500

kg

3.00

0 kg 3.70

0 kg

2.500 kg 67.5˚

m

8

1

m

7

6

5

4

3

2

34 2 1 0

50 ̊

60 ̊

40 ̊

30 ̊

20 ̊

10 ̊

0 ̊

1.50

0 kg

2.000 kg 67.5˚

2.00

0 kg 2.50

0 kg

3.00

0 kg

3.70

0 kg

2.500 kg

8

7

6

5

4

3

2

1

m 4 3 2 1 0

0 ̊

10 ̊

20 ̊

30 ̊

40 ̊

50 ̊

60 ̊

3.500 kg

1.150kg 1.350 kg

1.50

0 kg

1.80

0 kg 2.20

0 kg 2.60

0 kg

3.00

0 kg

Prin

ted

in G

erm

any

Prin

ted

in G

erm

any


SAME dEUTZ-FAHR dEUTSCHLAnd gmbH, d-89415 Lauingen, www.deutz-fahr.de

ww

w.t

rio-b

.com

JLG

I101

-008

/ 021

3

bE suRE wiTH ORiGinAl dEuTZ-fAHR sERViCE And pARTs.

Original service is wise.Only your DEUTZ-FAHR specialist dealer knows your tractor inside and out. Only your dealer has regularly trained mechan-ics and experts on call. Only dealers have the special tools and diagnostic equipment required for competent diagnosis and in-spection. All this gives you peace of mind –without doubt.

Original parts make good sense. As you placed your trust in the original tractor, we recommend you use original parts when required. Only these comply with the high quality and safety standards of DEUTZ-FAHR and ensure correct func-tion and operation without problems –guaranteed.

dEUTZ-FAHR lubricants.We recommend genuine DEUTZ-FAHR lubricants. The outstanding qual-ity of this product range, which is madeexclusively for DEUTZ-FAHR, ensures that your tractor always receives exactly what it needs.

This printed material is designed for international use. The illustrations it contains show both special equipment and incomplete standard equipment. The availability of some illustrated models, standard and special equipment can vary from country to country. Only the dealer‘s price list stipulates whether such illustrated equipment is included as a standard feature or whether it is a special accessory. In addition the illustrated mounted implements and special accessories may not always comply with the respective statutory regulations. It is the responsibility of the customer – after consultation with the dealer – to verify this, taking the operating instructions into account. All information and illustrations in this brochure are subject to correc-tion; errors excepted. Furthermore all information contained in this brochure is not binding and is subject to modifi cations of a technical and commercial nature or those resulting from statutory regulations. No claims whatsoever can be derived from these. SAME DEUTZ-FAHR DEUTSCHLAND GmbH reserves the right to make any changes to the design and technical construction and also the scope of standard equipment at any time and without prior notice.

Your dEUTZ-FAHR dealer will be pleased to answer your questions:


deutz-fahr agrovector brochure

Documents

powerful working

powerful lifting

drive speed

productive working

hydrostatic drive

powershift drive

versatile manoeuvering

high pump fl