determining the environmental impacts of conventional and ... lca_draft… · additional...
TRANSCRIPT
© Ricardo plc 2020
Creating a world fit for the future
© Ricardo plc 2020
Determining the environmental impacts of conventional and alternatively fuelled vehicles through Life Cycle AssessmentNikolas Hill, 2020 Annual Meeting of the G20 Transport Task Group, 7 October 2020
2G20 TTG 2020Public© Ricardo plc 7 October 2020
• Brief introduction to the project• Unique selling points for the work• Highlights of the main results• Future research needs• Questions & AnswersContents
3G20 TTG 2020Public© Ricardo plc 7 October 2020
Why are we interested? A combination of changes in the regulatory environment, as well as the uptake of new fuels/powertrains, means many complex future scenarios
41.737.5
0.0
52.5 50.4
14.7
61.5 59.4
29.1
54.9 52.5
16.2
0
10
20
30
40
50
60
70
GasolineICE
G-ICE(+10%bio)
BEV GasolineICE
G-ICE(+10%bio)
BEV GasolineICE
G-ICE(+10%bio)
BEV GasolineICE
G-ICE(+10%bio)
BEV
Exhaust Only Well-To-Wheel Vehicle Life Cycle Vehicle Life Cycle2020 2030
GH
G E
mis
sion
s [tC
O2e
]
Vehicle Use Vehicle Use (CO Regs) Fuel / Electricity Production Vehicle Embedded Emissions Total2
-10% - 0 -100% -4% -72% -3.4% -53% -4.3% -70%Passenger Car:ILLUSTRATIVE
Tailpipe counted as zero for bio component
for GHG inventories
Uneven uncertainties
Vehicle Policy Energy Policy OEM Product LCA
Historical; CO2Regulations
Biofuels deployed; RED
Increase in xEV Deployment Future DevelopmentsContext
41.7 : CO2 regs.: Inventories,
CSR
Source: Ricardo Vehicle LCA analysis (June 2020) for average EU lower-medium passenger car: Assumes lifetime 225,000 km, real-world fuel consumption. GHG from fuel/electricity consumption is based on the average fuel/grid electricity factor over the life of the vehicle (Baseline scenario); Calculated 89.0 kgCO2e/kWh battery in 2020, 30.0 kgCO2e/kWh in 2030. Includes EoL recycling credits
4G20 TTG 2020Public© Ricardo plc 7 October 2020
EC DG CLIMA Vehicle Policy LCA project; with E4tech, ifeu:• Objective to develop and apply LCA methodology across a range of
road vehicle types, powertrains and energy chains:– Literature review and data collection– LCA Methodological Development– Application of the LCA methodology to provide results, explore
hotspots and key sensitivities to the outcome
Ricardo projects for the European Commission provide holistic insights on the impacts of different vehicles, powertrains & fuels and the circular economy
269
164
229
121
253222
197
135
208
119
187
101
143
52
138
51
120
33
186
54
-50
0
50
100
150
200
250
300
2020
2050
2020
2050
2020
2050
2020
2050
2020
2050
2020
2050
2020
2050
2020
2050
2020
2050
2020
2050
ICEV-G
ICEV-D
ICEV-LPG
ICEV-CNG
HEV-G
HEV-D
PHEV-G
PHEV-D
BEV FCEV
GW
P [g
CO
2e/v
ehic
le-k
m]
Product ion WTT TTW Maintenance End-of-Life Total
5G20 TTG 2020Public© Ricardo plc 7 October 2020
End-of-LifeAdds assessment of environmental impact of “end of life” scenario (i.e. -to-Grave). Can include: re-using
or re-purposing components, recycling materials, energy
recovery and disposal to landfill
Vehicle ProductionAssessment of ‘Cradle-to-Gate’
environmental impact of producing the vehicle, including extract of raw materials, processing, component
manufacture, logistics, vehicle assembly and painting
Vehicle cycle “Embedded” emissions result from vehicle manufacturing, maintenance and end-of-life (EoL) disposal
Well-to-Wheel (WTW) Analysis on the production of
fuels and electricity, and operational emissions Fuel & Electricity
ProductionAssessment of (WTT)
environmental impact of producing the energy vector(s) from primary energy source, generation plants,
through to distribution point
Our EC Vehicle Policy LCA project considers environmental impacts over the whole life of the vehicle
Vehicle Life Cycle
Use/Operation• Environmental impact of driving
(TTW emissions)
• Impact from maintenance and servicing
Study Boundary: The whole vehicle life cycleincludes embedded emissions
from vehicle production, maintenance and servicing, and end-of-life activities, and WTW (WTT+TTW) emissions
from fuels and electricity
Transport Infrastructure - charging/ refuelling; roads etc. Not in scope
Ele
ctric
ity S
tora
geVe
hicl
e M
anuf
. Pla
nts
Not
in s
cope
6G20 TTG 2020Public© Ricardo plc 7 October 2020
The EC Vehicle LCA project has a number of unique selling points and has delivered significant added value compared to existing studies in this area
• The project covered a wide range of (14) LCA impact metrics, not just GHG emissions (GWP) and Cumulative Energy Demand (CED)(i.e. AP, POCP, ODP, PMF, HTP, FA ETP, IRP, ARD minerals & metals, ARD fossil energy, land use, water scarcity)
• 7 light- and heavy-duty road vehicle types, and different duty cycles were analysed using a consistent and harmonised methodology
• Accounting for end-of-life impacts: application of PEF CFF*, and estimation of benefits resulting from second-life of xEV batteries*Product Environmental Footprint – Circular Footprint Formula
• Alignment with the EC’s 1.5 Tech scenario*: Accounting for temporal effects on materials, energy carriers and vehicle characteristics* Long-Term Strategy to reach a climate-neutral Europe by 2050 - scenario consistent with the EU contribution to meeting the Paris Agreement objective of keeping global temperature increase to a maximum of 1.5 oC; https://ec.europa.eu/clima/policies/strategies/2050_en
• Development and application of a new methodology, supported by testing of the results using a thorough set of sensitivity analyses
3
LiLithium
1.5 oC
7G20 TTG 2020Public© Ricardo plc 7 October 2020
The EC Vehicle Policy LCA covered many different dimensions – this required a streamlined approach for the development and application of the methodology
Scope of our study vis-à-vis reference studies
0%
20%
40%
60%
80%
100%GHG
Other impacts
No. vehicle types
No. powertrain types
VehicleProd./Use/EoL
No./detail on fuelchains
No./detail onelectricity chains
Temporal variation(2020-2050)
Spatial variation
Our Study THELMA Project JEC WTW Study GREET Model
Level of coverage and detail
Options for LCA coverage, detail
DG CLIMA Vehicle LCA Project
Many choicesè needed to manage both robustness
and consistency
Future Work
65 Vehicle /Powertrain
combinations14 generation types + 34 Generation Mix
60 fuel production chains + 12 Fuel Blends
EU + 28 countries, CN,
KR, JP, US, World
14 impact categories,
+ 12 individual pollutants
8G20 TTG 2020Public© Ricardo plc 7 October 2020
0%20%40%60%80%
100%120%140%
GWP
CED
POCP
PMFHTP
ARD_MM
WaterS
ICEV-G [2020]ICEV-GHEV-GPHEV-GBEVFCEV
2020
Reference powertrain
0%20%40%60%80%
100%120%140%
GWP
CED
POCP
PMFHTP
ARD_MM
WaterS
ICEV-G [2020]ICEV-GHEV-GPHEV-GBEVFCEV
2050
�
EC Vehicle Policy LCA results are provided for each impact category, with a wide range of sensitivities – e.g. for Lower Medium Cars (i.e. European Segment C)
Ope
ratio
n
Sensitivity Impact1 Regional Variation High
2 Lifetime km Medium
3 PHEV fuel share Medium4 Loading Medium5 Future ICE air quality
plan (AQP)Low
6 Ambient temperature Low7 Fuels methodology Low-Mid8 Trajectories for glider
material compositionLow
9 Electric range Low
10 Battery energy density
Low
11 Battery EU sustainable value chain
Low
12 Battery 2nd life Low
13 Vehicle EU sustainable value chain
Low
Notes: GWP = Global Warming Potential; CED = Cumulative Energy Demand; POCP = Photochemical Ozone Creation Potential, PMF = Particulate Matter Formation; HPT = Human Toxicity Potential; ARD_MM = Abiotic Resource Depletion, minerals and metals; WaterS = Water Scarcity
Additional information: 225,000km, 15 year lifetime. 2020 BEV battery 57 kWh, 300km range, with av. lifetime EU28 fuel/electricity mix (age-dependant mileage weighted). No battery replacement calculated to be needed for xEVs.
Veh.
Spe
c.
Prod
.+ E
oL
269164
229121
253222
197135
208119
187101
14352
13851
12033
18654
-50 0 50 100 150 200 250 300
20202050202020502020205020202050202020502020205020202050202020502020205020202050
ICEV
-G
ICEV
-D
ICEV
-LP
GIC
EV-
CNG
HEV
-G
HEV
-D
PHEV -G
PHEV -D
BEV
FCEV
GWP [gCO2e/vehicle-km]
Production WTT TTW Maintenance End-of-Life Total
Lower Medium Car – Tech1.5 Scenario � �
9G20 TTG 2020Public© Ricardo plc 7 October 2020
• Modelled variation in impacts due to ICEV powertrains is much lower (with a range of approx. +-10% of the EU av.), due to a combination of variation in driving shares by road type and temperature variations (other impacts not modelled)
Example – Regional variation impacts of comparison of ICEVs vs BEVs shows that in the vast majority of EU countries BEVs already show significant GHG benefits
100%
85%
45%
105%
83%
75%
60%57%56%51%50%50%47%47%46%46%44%44%44%
38%38%37%37%37%36%36%36%35%35%
26%25%
-50
0
50
100
150
200
250
300
350IC
EV-G
ICEV
-DBE
V EE PL CZ
DE
BG MT
GR NL
RO SI CY
HR IT LT IE LU BE ES AT SK HU
DK LV PT UK FI FR SE
EU28 BEV
GW
P [g
CO2e
/veh
icle
-km
]
% EU28 ICEV-GEnd-of-LifeMaintenanceTTWWTTProductionTotal 2030
EU28 BEV, 2020
Source: Ricardo LCA modelling, July 2020. Results shown for the lower medium car in the baseline scenario. Production = production of raw materials, manufacturing of components and vehicle assembly; WTT = fuel/electricity production cycle; TTW = impacts due to emissions from the vehicle during operational use; Maintenance = impacts from replacement parts and consumables; End-of-Life = impacts/credits from collection, recycling, energy recovery and disposal of vehicles and batteries. Additional information on key input assumptions and derived intermediate data include the following: a lifetime activity of 225,000 km over 15 years. 2020 BEV battery has a 58 kWh, a 300km WLTP range, and with average lifetime EU28 fuel/electricity mix (age-dependant mileage weighted). No battery replacement is calculated to be needed for BEVs, based on the assumptions on the capacity of the battery, battery cycle life and lifetime km of the vehicle.
Lower Medium Car
10G20 TTG 2020Public© Ricardo plc 7 October 2020
Ricardo developed a bespoke and flexible LCA framework, which was used to provide results1. A harmonised/consistent comparison of the environmental performance of vehicles has been developed for
all stages of the vehicle life-cycle, with a number of unique aspects and novel approaches implemented
2. Results prove the significant potential benefits of xEVs, whilst highlighting key dependencies and hotspots: – Benefits increase with degree of electrification and over time– Production and EoL stages responsible for larger share of impacts in xEVs compared to conventional powertrains– Benefits vary with EU Member State
3. Results show that natural (and bio-/synthetic-) gas fuelled vehicles can provide significant benefits vs conventional alternatives
4. Conclusions shed light on key areas/factors that determine relative performance of vehicles: – Benefits of BEV, PHEV, FCEV significantly enhanced with decarbonised electricity/H2, battery improvements, EU manuf.– Benefits increase with improved process efficiency and generation mix used in the production of key raw materials– Potential benefits of improved recycling material recovery rates and shift to lower carbon electricity in recycling
processes (EU Circular Economy)– Cumulative energy demand BEV << FCEVs << e-fuels due to the less efficient end-to-end energy chain
5. Findings for low carbon fuels are less clear, need further work particularly on low carbon fuel options that are not yet commercially mature (i.e. synthetic bio- and e-fuels)
Key conclusions and achievements
11G20 TTG 2020Public© Ricardo plc 7 October 2020
Recommendations for future work
Area Methods Data Comment
Vehicle Specification
Refine current assumptions based on improved data and/or expand analysis to include other vehicle types
Vehicle / Battery Manufacturing
- Improved characterisation of battery manufacturing, particularly for newer and advanced battery chemistries. - More information / data on efficiency improvements in recent years and on effects of future improvements
Electricity Chains - Updated input data on future electricity mix projections- Further review and enhancement of underlying datasets
Fuel Chains / - - Some methodological areas need further consideration e.g. counterfactual
and substitution scenarios, LUC - Development of improved datasets for new processes - particularly for synthetic fuels- Improvements in data/methodological consistency and modelling of additional fuel chains
Vehicle Operation Further enhancement to methodologies to enable capturing of sensitivities due to other effects such as climatic impacts on energy consumption and emissions for heavy duty vehicle applications (buses and coaches)
Vehicle / Battery End-of-Life
Improved datasets for certain recycled materials;Further research on of end-of-life recycling and battery second life: LCA methodologies and data
12G20 TTG 2020Public© Ricardo plc 7 October 2020
Recommendations for future work
Area Methods Data Comment
Refuelling, recharging, and ERS infrastructure (i.e. catenary)
- Not covered in this study- Methodologies and datasets need developing to characterise existing and new infrastructure- Fleet-level modelling/assessment may be needed to appropriately allocate impacts on a vehicle-basis
Other transport infrastructure
- Not covered in this study- Expansion of boundary to also consider other road infrastructure elements
System/Fleet impacts modelling
- Not covered in this study- Complimentary whole vehicle fleet/system modelling is needed to capture resource flows / life-cycle impacts using outputs from this study. In particular, resource issues are not always captured well by current LCA impact categories (e.g. Li /Co /Ni)
Effects of new technologies and trends
- Not covered in this study- Estimation of further operational effects due to new technology or trends: e.g. effects of C-ITS / ITS and autonomous vehicle technologies on (a) production/disposal of new systems added to the vehicle, (b) impacts of infrastructure, (c) impacts on vehicle operational efficiency / emissions
Creating a world fit for the future
© Ricardo plc 2020
Questions & Answers
Creating a world fit for the future
© Ricardo plc 2020
Thank you!
Nikolas HillRicardo Energy & EnvironmentThe Gemini BuildingFermi AvenueHarwell, Didcot OX11 0QRUnited Kingdom
T: +44 (0)1235 75 3522 E: [email protected]: [email protected]
Creating a world fit for the future
© Ricardo plc 2020
Additional slides
16G20 TTG 2020Public© Ricardo plc 7 October 2020
Our ambition is to create a world fit for the future,meeting the challenges within the markets of Transport & Security, Energy and Scarce Natural Resources & Waste
3,000+ staff 88 nationalities
51 sites in 26 countries
SectorsAutomotive & IndustrialCommercial Vehicles
Defence
Energy & Environment
Motorsport
Motorcycle
Off-Highway Vehicles
Rail
17G20 TTG 2020Public© Ricardo plc 7 October 2020
Note: * Based on EU registrations-weighted averages for: Lower Medium = defined as segment C vehicles (e.g. VW Golf) and medium SUVs (e.g. Nissan Qashqai); Large SUV = Large SUVs / Crossovers (e.g. BMW X5, Land Rover Range Rover, Volkswagen Touareg, Volvo XC90, etc.). **Urban bus using regular ultra-rapid charging via a pantograph connection at stops along its route, enabling a significantly smaller on-board battery. Not a trolleybus. *** Modelled with two variants each: -CNG and -CNG lean-burn; -LNG and -LNG/Diesel HPDI.
A modular approach was used to define/characterise generic vehicles and to estimate changes 2020-2050 for a wide range of vehicle types and powertrains
Body type: Passenger Car Van Rigid Lorry Articulated Lorry Urban Bus Coach
Segment/Class: 1. Lower Medium; 2. Large SUV *
N1 Class III (3.5 t GVW)
12 t GVW, Box Body
40 t GVW, Box Trailer
Full Size (12m) Single Deck
Typical Single-Deck, 24 t GVW
Gasoline ICEV Y YDiesel ICEV Y Y Y Y Y YCNG ICEV *** Y Y Y Y YLPG ICEV Y YLNG ICEV *** Y Y Y YGasoline HEV Y YDiesel HEV Y Y Y Y Y YGasoline PHEV Y YDiesel PHEV Y Y Y Y Y YBEV Y Y Y Y Y YFCEV Y Y Y Y Y YFC-REEV Y Y YDiesel HEV-ERS YBEV-ERS Y Y**
18G20 TTG 2020Public© Ricardo plc 7 October 2020
EU fuel blend/production mix assumptions used in the overall Vehicle LCA modelling, as a percentage of the total including conventional fossil fuels
5.6% 5.6% 6.3% 5.6%17.1%
30.7%
0%10%20%30%40%50%
2020 2030Baseline
2050Baseline
2030TECH1.5
2040TECH1.5
2050TECH1.5
% B
lend
with
con
vent
iona
l
Gasoline Blends
BioE-Crop BioE-Waste BioE-Other SynGasoline Total Non-Fossil
8.1% 8.1% 9.2% 8.0%
21.6%
40.0%
0%10%20%30%40%50%
2020 2030Baseline
2050Baseline
2030TECH1.5
2040TECH1.5
2050TECH1.5
% B
lend
with
con
vent
iona
l
Diesel Blends
FAME-Crop FAME-Waste HVO-CropHVO=Waste SynDiesel Total Non-Fossil
4.0% 4.0%12.9%
3.9%11.4%
26.8%
0%10%20%30%40%50%
2020 2030Baseline
2050Baseline
2030TECH1.5
2040TECH1.5
2050TECH1.5
% B
lend
with
con
vent
iona
l
CNG/LNG Mix
BioM-AD BioM-Gas SynGas Total Non-Fossil
100% 90%
30%
80%
10%
50%
20%
50%30%
20%
10%20%
40% 50%
0%20%40%60%80%
100%
2020 2030Baseline
2050Baseline
2030TECH1.5
2040TECH1.5
2050TECH1.5
% s
hare
of p
rodu
ctio
n
Hydrogen Mix
SMR (NatGas) Electrolysis (GridAv)Electrolysis (RenEn) SMR+CCS (NatGas)
Source: The blend/mix of fuel production chains assumed are only indicative as these were limited by the subset of the currently available fuels that have been modelled as part of this project. BioE = bioethanol, BioM-AD = biomethane from anaerobic digestion process chains, BioM-Gas = biomethane from gasification process chains, SynGasoline / SynDiesel includes e-fuel / PtX chains as well as biomass-to-liquid (BtL) chains.
19G20 TTG 2020Public© Ricardo plc 7 October 2020
The methodology has been implemented in our bespoke Vehicle LCA Model, with:
• A Modular Excel-based modelling framework developed by Ricardo
• A Results Viewer to review the final outputs
The EC Vehicle Policy LCA project methodology was applied in a modular framework developed by Ricardo to generate results and conclusions for the project:
Electricity Production
Chains
Fuel Production
Chains
Results Viewer
Underlying background LCI / materials data base(s) (ecoinvent, GREET, etc.)
Generic LCA dataset, incl. temporal development of materials impacts, etc.
Vehicle Chain: Vehicle
Specification, Manufacturing, Use and EoL
Key interfaces
Indirect interfaces /links
Outputs
General conclusions and reporting Delivered to DG CLIMA
Application of the LCA methodologyRicardo internal models*
1
23 4
5
0
ifeu Refinery Model
ifeu Umberto Model
20G20 TTG 2020Public© Ricardo plc 7 October 2020
Key findings and benefits of vehicle LCA
+ Helped to confirm significant GWP benefits for xEVs over other types of powertrain that also increase over time• Also helped identify the significance of key
uncertainties and assumption via sensitivities+ Highlighted hotspots, e.g. for xEVs due to
certain materials through Abiotic Resource Depletion and Human Toxicity Potential
+ Cumulative energy demand is much higher for FCEVs than BEVs due to the less efficient end-to-end energy chain (more so for e-fuels)
+ EoL methodologies help illustrate the benefits (also for the circular economy) for vehicle recycling and battery 2nd life applications
Summary: What has / can vehicle LCA tell us about the impacts of different vehicles / powertrains / fuels, and circular economy? What are the key challenges for LCA and areas where other complementary approaches are needed?
Challenges for LCA and future improvements
! Highly complex; further standardisation / vehicle LCA PCR (product category rules) needed to facilitate comparisons Ü EU policy?• Different methodologies and assumptions can
have significant impacts on the result! Resource issues not always captured well by
current LCA impact categories (e.g. Li /Co /Ni)• Complimentary fleet/system modelling needed
to capture resource flows / implications! Uncertainty on future battery recycling /
recovery levels and impacts! Improved policy needed on 2nd life batteries,
and methodologies for assessing repurposing and 2nd life impact/credits are needed