department of mechanical engineering university of ... · pdf fileno table of contents entries...
TRANSCRIPT
No table of contents entries found. [Pick the date]
Department of Mechanical Engineering
University of Moratuwa
Sri Lanka
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 1
Contents
Introduction ................................................................................................................................................................................................. 02
Objectives ..................................................................................................................................................................................................... 03
Entry Requirements ................................................................................................................................................................................. 03
Scheme of Evaluation ............................................................................................................................................................................... 04
Duration ........................................................................................................................................................................................................ 04
Curriculum ................................................................................................................................................................................................... 05
Syllabi of Course Units ............................................................................................................................................................................. 10
Course Fees .................................................................................................................................................................................................. 11
Resource Persons ...................................................................................................................................................................................... 11
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 2
The whole world is facing a daunting array of energy & environment related challenges, which would be decisive factors in sustainable economic and industrial growth and technological innovations. There is a necessity for utilisation of energy in a rational manner without overloading the carrying capacity of ecosystem and depriving the survival of the future generation. In fact, sustainable development with minimal environmental degradation has become the motto of energy engineering. The importance of these aspects has received a new momentum in the recent past with the concerns and mechanisms originated by international level initiatives such as ISO14000 on environmental aspects in the industrial sector, and Montreal protocol and Kyoto protocol in relation to climate change. Therefore, the energy sector should not be analysed in isolation and must be dealt considering its interrelation to environment and society. For such analysis, a sound knowledge on all the related areas and associated skills are vital not only for technical aspects of energy but also for managing, advising and policy making in the sector, through well structured and planned educational framework. As such, the postgraduate programme in Energy Technology is developed with reference to synthesis of trends in sources, technologies and relevant environmental and social aspects. Detailed design aspects of energy systems and related issues are also incorporated in the programme. The knowledge and experience imparted by the programme will flow downwards to the technician level where operational & maintenance aspects of energy technology occur.
Diffuse the fundamental knowledge and state of the art of the Engineering Science involved in Energy
conservation & utilisation.
Provide an environment to foster the attainment of Research & Development targets related to the
Energy sector.
Enhance the knowledge of Engineers in contributing to national, regional 7 global energy
environmental issue and clean & efficient technologies.
Master of Engineering/Postgraduate Diploma Programme in
Energy Technology
OBJECTIVES :
INTRODUCTION :
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 3
The Degree of Bachelor of Science of Engineering of the University of Moratuwa in Mechanical
Engineering/Chemical Engineering/Electrical Engineering/Materials Science and Engineering, OR
Any other engineering degree of at least four years duration, from a recognised University, in a
relevant field of specialization as may be approved by the Senate, OR
Any recognized category of membership of a recognized professional institute, obtained through an
academic route, with a minimum of one year of recognized appropriate experience obtained after the
membership, as may be approved by the Senate.
Postgraduate Diploma
12 Months – Part Time (Friday & Saturday)
Master of Engineering
24 Months – Part Time (Friday & Saturday)
ENTRY REQUIREMENTS:
DURATION :
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 4
The curriculum of the postgraduate programme in Energy Technology is developed to enhance the knowledge and skills of the participants in many areas such as:
Fundamentals of Energy Engineering which enhance the analytical abilities, Renewable Energy Technologies such as Bio energy, Wind, Solar and Hydel Energy and Modern
Energy Technologies which could contribute to reduce environmental degradation while improving energy security,
Waste Heat Recovery Technologies, which can be extensively applied in many local industries to
increase the overall energy efficiency, Energy Conservation and Management that lead the engineers to gain the knowledge of energy
auditing, energy conservation and management, not only to reduce cost of energy of their factories/organizations, but also to assist the nation building process,
Design of Energy Systems and Energy Economics, which strengthen the competence in solving
practical problems and tackling crisis situations, Building Energy that covers air-conditioning and lighting systems, thermal comfort, heat transfer
in building envelopes, and energy efficiency, Energy and Environment that highlights the adverse effects of energy usage on environment
together with technical and non-technical options available for mitigation.
All lectures and tutorials, assignments, laboratory work, seminars, etc. will normally be conducted in a three
term academic year on Fridays and Saturdays. Those who proceed to the M.Eng. degree will be required to do
a Research Project in the second year.
CURRICULUM :
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 5
Master of Engineering
YEAR 1
Postgraduate Diploma
Fuels & Combustion
Wind Energy
Hydel Energy
Solar Energy
Bio Energy
E
lect
ive
s
(tw
o t
o b
e S
ele
cte
d)
Energy Economics
Energy Conservation &
Management
Instrumentation &
Experimental Techniques
Transfer Processes
Co
mp
uls
ory
Mathematical techniques
Industrial fluid Dynamics
Energy Sources
Transfer Processes
Co
mp
uls
ory
Research Project [Study area of the Research Project is preferably to be identified and proposed by the candidate related to his/her present employment in the industry]
La
bo
rato
ry w
ork
, Ass
ign
me
nt,
Se
min
ars
, Fie
ld V
isit
Design of Energy Systems
Boiler & Furnace Systems
Energy & Environment
Special Study
Co
mp
uls
ory
Rural Energy Systems
Building Energy
Waste Heat Recovery &
Upgrading Systems
Emerging Energy
Technologies
Bio Energy
Ele
ctiv
es
(o
ne
to
be
Se
lect
ed
)
YE
AR
1
TE
RM
1
TE
RM
2
TE
RM
3
YE
AR
2
YE
AR
1
TE
RM
1
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 6
First Year: PG Diploma Component
Term 1:
Duration: 14 Weeks
Compulsory Courses:
Course Credits
Evaluation
Final Continuous Assessment
ME5001 Mathematical Techniques 03 75% 25%
ME5002 Industrial Fluid Dynamics 03 50% 50%
ME5003 Energy Sources 03 75% 25%
ME5004 Transfer Processes 03 50% 50%
Total Credit Requirement in Term 1 = 12
Term 2:
Duration: 14 Weeks
Compulsory Courses:
Course Credits
Evaluation
Written Exam.
CA
ME5020 Energy Economics 2.5 75% 25%
ME5021 Energy Conservation and Management 03 75% 25%
ME5022 Instrumentation and Experimental Techniques 1.5 75% 25%
Elective Courses (Two to be selected):
Course Credits Evaluation
Written Exam.
CA
ME5023 Fuels and Combustion 03 50% 50%
ME5024 Solar Energy 03 50% 50%
ME5025 Wind Energy 03 50% 50%
ME5026 Bio-Energy 03 50% 50%
ME5027 Hydel Energy 03 50% 50%
Total Credit Requirement in Term 2 = 13
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 7
Term 3:
Duration: 14 Weeks
Compulsory Courses:
Course Credits Evaluation
Written Exam.
CA
ME5040 Design of Energy Systems 03 75% 25%
ME5041 Boiler and Furnace Systems 1.5 75% 25%
ME5042 Energy and Environment 2.5 75% 25%
ME5090 Special Study 05 - 100%
Elective Courses (One to be selected):
Course Credits Evaluation
Written Exam.
CA
ME5043 Waste Heat Recovery and Upgrading Systems 03 50% 50%
ME5044 Building Energy 03 50% 50%
ME5045 Rural Energy Systems 03 50% 50%
ME5046 Modern Energy Technologies 03 75% 25%
Total Credit Requirement in Term 3 = 15
Total credit requirement for PG Diploma: 40 Credits
Second Year: M.Eng. Research Project
MEng Project Credits Evaluation
Written Exam.
CA
ME5090 Research Project 20 - 100%
Total credit requirement for M.Eng.: 40 + 20 Credits = 60 Credits
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 8
Benchmark
Percentage Grade
Grade
Point Description
85 and above A+
4.2
75 to 84 A 4.0 Excellent
70 to 74 A-
3.7
65 to 69 B+
3.3
60 to 64 B 3.0 Good
55 to 59 B-
2.7
50 to 54 C+
2.3 Pass
I 0.0 Incomplete
F 0.0 Fail
N --- Academic concession
The Grade Point Average (GPA) is calculated based on the summation of Grade Points earned for all
modules registered for credit (except those awarded with academic concession or withdrawn) weighted
according to number of credits, as follows.
where ni is the number of credits for the ith module and gi is the grade points earned for that module.
The GPA is rounded to the nearest second decimal place and reported on the transcript.
Eligibility for the award of PG Diploma in Energy Technology with an overall GPA not less than 2.5.
80% attendance is usually required in lectures, as specified under clause 4.1.1(a) of the By-Law.
Participation is compulsory in assignments, as specified under clause 4.1.1(b) of the By-Law
Undertaking research in a specific area is compulsory, as specified in clause 4.1.1(c) of the By-Law.
The Masters degree programme is expected to be completed in the normal duration, but may go on till
the permitted duration of study without the need of an extension as specified under section 5 of the By-
Law.
It is the responsibility of the student to obtain an extension to the permitted duration, through the Head
of Department. Such requests to extend the duration will be taken, considering the progress of the
student at the time of request.
Prior approval must be obtained in writing from the University, with the necessary documentation, for
leave of absence (as defined by the Senate). Only such leave will be considered for any official purpose,
such as considering a subsequent attempt as a first attempt.
i
i i
n
g n GPA
EVALUATION AND GRADING:
Participation in the academic programme:
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 9
Only approved leave obtained on medical grounds will be normally be considered by the Senate in
extending the maximum duration of study.
The performance of each student in each module will be evaluated by continuous assessment (CA) and
end-of-semester examination (WE).
The CA component in a module normally carries a weightage of not less than 30% and not more than
60% of the total marks.
The continuous assessment of a student may be based on a specified combination of assignments
including coursework, project work, design project work, laboratory work, tutorials, field trips, field
camps, quizzes, presentations, term papers and participation in the course activities.
Each Candidate should obtain at least 40% from each of CA and WE components to obtain a pass grade
for a module.
Grade C+ or above is required to earn credit for and pass a module.
A student failing to reach 40% in one of CA or WE components receives an incomplete grade I, and is
required to repeat only the failed component/s as a repeat candidate to complete the module.
A student obtaining at least 40% in each of CA and WE components but fails to pass a module receives
an incomplete grade I, and is required to repeat either of the component as a repeat candidate to
complete the module.
A student failing to reach 40% in both CA and WE components receives an F grade, and must repeat
both components in order to upgrade the result.
The grades F or I can be improved up to a C+ grade and considered for calculating the GPA. Students
who wish to upgrade need to complete their examinations and obtain the upgraded grade before the
relevant final board of examiners after the graduation requirements are met.
The grade achieved for each module will be entered on the student’s permanent record in the registry.
The grade at the first attempt or the improved grade earned at a subsequent attempt, if any, will be
recorded.
Except when an Academic Concession has been granted, the highest grade obtainable at a repeat
attempt is the grade “C+” and it will be used for calculating Grade Point Average (GPA).
Grade N signifies an Academic Concession granted, in the event a student is unable to sit for the WE
component due to illness or other compelling reason accepted by the Senate. In such instances the
student must make an appeal, with supporting documents, to the Senate through the Director
Postgraduate Studies for an Academic concession.
Letter grades based on the Grade point system and corresponding description, as illustrated in the Table
5.1 will be used to express the performance at each module. Benchmark percentages are given for the
guidance of the examiner and may be changed upwards or downwards by the moderator in consultation
with the examiner.
EVALUATION AND GRADING:
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 10
ME 5001 - Mathematical Techniques Partial differential equations – classification, modelling, solutions using Fourier series, Fourier transform;
Numerical methods – finite difference methods, finite element methods, solutions of ordinary and partial
differential equations, applications using computer software; Optimisation – Non-linear optimisation
involving multivariate function, dynamic programming; Methods of applied statistics – sampling, hypothesis
tests, basic ideas of linear models, time series modelling.
ME 5002 -Industrial Fluid Dynamics Introduction; Fluid flow analysis techniques; Governing equations in fluid mechanics - conservation of mass,
momentum and energy, constitutive relations; Flow through bounded systems – circular and non-circular
sections, curved ducts, frictional losses, fitting and valve losses, leakage flow, complex fluid flow systems;
Industrial ventilation – active and passive ventilation, ventilating devices; Agitation – types of agitators, flow
patterns, design parameters, dimentional analysis; Fluid machinery – classifications, pumps, turbines, fans
and blowers, basic performance characteristics, hydraulic losses, cavitation, noise; Particle mechanics –
motion of particles, flow through packed bed of particles, fluidisation, fluid conveying, particle separation;
Industrial flow and pressure measurements – devices, theory and design aspects; Design aspects and
numerical modelling of typical industrial applications – flow in stacks/chimneys, cyclone separators, dust
extraction systems, fan & blower design and testing, duct design, industrial drying systems.
ME 5003 - Energy Sources Fossils and minerals – World energy resources from oil, gas, coal and nuclear and their availability,
development of resources, technologies of conversion, environmental aspects; New and renewable energies –
characteristics of renewable sources, solar, wind, biomass, hydel, geothermal, OTEC, resources and
availability, current technologies of conversion, environmental aspects; Energy storage systems.
ME 5004 - Transfer Processes Fundamentals of heat transfer; Conduction – steady and unsteady state, multi-dimension systems, analytical
& numerical solutions and charts, typical industrial applications; Convection – estimation of convective heat
transfer coefficients, laminar and turbulent flow, dimensional analysis, empirical correlation, two phase flow;
Radiation – basic laws, black-body radiation, radiation in black and grey enclosures with non-participating
medium, gas radiation, applications to boiler and furnace systems; Mass transfer – laws and definitions,
diffusion and convective mass transfer, film theory, interface flow, dimensional analysis, empirical
correlation, industrial applications.
ME 5020 - Energy Economics General background; Local energy scenario; Availability of different sources; Supply and demand projection;
Integrated energy planning; Energy pricing;
Financial evaluation of projects; Environmental impact assessments, Project financing options; Energy sector
restructuring; Related policy issues.
SYLLABI :
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 11
ME 5021 - Energy Conservation and Management Introduction – basic approaches, benefits & trends; Energy conservation programme – organisation, energy
auditing, analysis, formulation of energy management options, economic evaluation, implementation &
control; Energy conservation technologies – conservation in energy intensive industries, steam generation &
distribution systems and electrical systems, demand-side management, co-generation, total energy schemes,
thermal insulation, energy storage; Economic evaluation of conservation technologies; Analysis of typical
applications.
ME 5022 - Instrumentation & Experimental Techniques Measuring techniques and instrumentation for temperature, pressure, velocity, flow rates, solar radiation,
sound, chemical composition; Controllers – working principles, selection; Data logging; Signal conditioning
ME 5023 - Fuels and Combustion Classification of fuels – solid, liquid & gaseous; Characteristics of fuels – factors related to energy &
environment; Thermodynamics of combustion – first and second law analysis, degradation of
thermodynamic potential in combustion systems, estimation of heats of formation & reaction; Kinetics of
combustion – definitions & laws, kinetics of combustion of typical fuels; Kinetically controlled combustion –
characteristics, analysis, self ignition & quenching phenomena; Diffusionally controlled combustion –
characteristics, analysis; Premixed flames; Droplet combustion and solid particle combustion analysis;
Combustion systems in boilers, furnaces & kilns, combustion chambers, stability of flames;
ME 5024 - Solar Energy Solar Geometry – introduction to sun-earth angles & charts, calculation of shading; Solar radiation –
definitions, availability, measurements & instrumentation, estimation through correlations, statistical
analysis; Solar Thermal systems – concentrating and non-concentrating collectors, theory of flat plate
collectors – characteristics to radiation, thermal losses, performance analysis, transient behaviour;
Applications – typical heating & cooling systems, drying systems; Introduction to system design methods –
charts & utilizability concept; Solar Photovoltaic systems – basic theory of photo-electricity, characteristics of
solar cells and of systems with storage, system sizing for typical applications; Case studies.
ME 5025 - Wind Energy Characteristics of wind – wind shear, turbulence, wind measurements and energy estimation, site selection;
Wind energy conversion systems – classifications, applications, basic sub-systems and components, design
parameters, aerodynamics of drag and lifting translators, operational characteristics; Theory of wind turbine
rotors – aerodynamics of wind rotors, aerodynamic losses, wake modelling, performance characteristics and
rotor design; Control systems; Load matching; Wind farms; Water pumping systems; Electricity generating
system; Structural dynamics and design; Energy storage systems; Maintenance; Environmental aspects; Case
studies.
ME 5026 - Bio-Energy Assessments of biomass resources, availability and potential, energy plantation; Fuel characteristics of
biomass; Biomass conversions; Bio-fuels – combustion characteristics; Direct heating; Thermochemical
convesion – pyrolysis, carbonization, gasification, liquefaction, densification; Biochemical conversion –
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 12
Biogas, ethenol; Conventional and new biomass energy conversion devices & technologies – household &
community combustion systems, industrial & commercial applications, Stirling cycle engines, Biogas
digestors, gasifiers, integrated gasification combined cycle, direct fired biomass fuelled steam power plant,
biomass co-firing in energy systems, sizing, design and performance characteristics; Environmental aspects.
ME 5027 - Hydel Energy Resource estimation, technologies, performance characteristics and cost of energy associated with Small
Hydro, Wave and Tidal energy systems.
ME 5040 - Design of Energy Systems Introduction; Models and modelling - general concepts of modelling, classification of models, Modelling of
thermal systems - modelling of thermal equipment, behaviour of processes and thermodynamics properties;
Modelling of renewable energy systems; System simulation – steady and unsteady state simulation;
Optimisation – calculus methods of optimisation, search methods, linear models and linear programming,
non-linear programming and its application, dynamic programming and its application, geometric
programming; Probabilistic approaches to design.
ME 5041 - Boiler & Furnace Systems Boilers - classification, configurations based on type of fuel and others, types of burners and working
mechanisms, thermo-hydraulic analysis, water treatment, controls; Furnaces – configurations, batch and
continuous function modes, refractories, fuels and burners, heat transfer analysis, controls.
ME 5042 - Energy and Environment Types and sources of wastes; Waste as a resource; Methods of treatment and disposal; Waste minimisation
and recycling; Air pollution – energy generating activities, impact assessment and impact mitigation; Water
pollution - waste water treatment and disposal; Integrated solid waste management; Environment impact
assessment related to energy projects. Transport Energy/Emission, indoor air pollution
ME 5090 – Special Study A study on a special topic leading to the formulation of the research project to be carried out in the second
year.
ME 5043 - Waste Heat Recovery and Upgrading Systems Introduction; Classification – sources and levels of waste heat; Evaluation of heat content; Methods/equipment of waste heat recovery - recuperators, run-around coils, regenerators, heat pumps, heat pipes; Fundamentals of exergy analysis – theory, typical application; Heat exchangers – classification, analysis, performance comparisons, industrial applications of liquid to liquid, gas to liquid and gas to gas heat exchnagers; Theory of heat exchanger assembly; Heat and power integration – basics, stream networks, tabular methods, stream splitting, process retrofit, installation of heat pumps and heat engines; Heat pumps – classification, mechanical compression, thermo-mechanical and chemical heat pumps, working fluids, application of technologies, case studies.
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 13
ME 5044 - Building Energy Introduction – energy use in buildings, factors effecting energy use, energy conservation options; External factors – climate, shading, sizing of shading devices; Thermal comfort – variables, comfort indices, comfort zones, assessment; Building air-conditioning systems – components, performance characteristics, conservation and controlling strategies; Building lighting systems – lighting fundamentals, visual performance, calculation of lighting levels, day lighting, energy efficient lighting, application through software; Heat transfer in building envelopes – basics, governing equations, thermal networks, finite difference and state space solutions, modelling and simulation of building internal climate & energy use, application through software.
ME 5045 - Rural Energy Systems Energy demand for rural community, Cooking & Drying applications, Rural Electrification, Energy supply options, Economic analysis of rural energy systems, social impacts
ME 5046 - Modern Energy Technologies Both Conversion and Utilization technologies: Advanced thermodynamics cycles, Clean Coal Technologies, Fuel Cells, Modern Renewable Energy Technologies, Cleaner Production, Transport System, Lighting, cooking, heating.
Tuition fees : PG Diploma - Rs. 200,000/=
MEng. Registration – an additional - Rs. 50,000/=
Every subsequent year - Rs. 30,000/=
Other Fees : Registration Fee (First Year) - Rs. 2,000/=
Registration Fee (Second Year) - Rs. 2,000/=
Registration (Subsequent Years) - Rs. 2000/=
Examination Fee - Rs. 1000/=
Re-Examination Fee - Rs. 1000/=
(Additional Rs. 100/= per subject)
Library Deposit : Normal Deposit - Rs. 2,500/= per book (up to
6 books)
Deposit with guarantee - Rs. 7,500/= for 6 books
Concessionary Deposit* - Rs. 2,500/= for 2 books
COURSE FEES :
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 14
Candidates who earn 40 credits in the PG Diploma phase may register for the PG Diploma or
the M.Eng. Degree.
Course Coordinator
Dr HKG Punchihewa Senior Lecturer Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 640 475
Email: [email protected]
Key Resource Personnel
Prof RA Attalage Professor Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0113 139 398
Email: [email protected]
Prof KKCK Perera Professor Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 640 470
Email: [email protected]
Prof AAP De Alwis Senior Lecturer Dept. of Chemical & Process Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4118
Email: [email protected]
Prof HSC Perera Professor Dept. of Management of Technology, University of Moratuwa.
Tele: 0112 650 301 Ext: 5202
Email: [email protected]
Prof TSG Peiris Professor Dept. of Mathematics, University of Moratuwa
Tele: 0112 650 301 Ext: 6201
Email: [email protected]
Dr MARV Fernando Senior Consultant Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4508
Email: [email protected]
Dr AGT Sugathapala Senior Lecturer Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 640 475
Email: [email protected]
Dr MZM Malhardeen Senior Lecturer Dept. of Mathematics, University of Moratuwa.
Tele: 0112 650 301 Ext: 6206 Email: [email protected]
DEGREE AWARDING:
RESOURCE PERSONS:
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 15
Dr VPC Dassanayake Senior Lecturer Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4501
Email: [email protected]
Dr MW Jayaweera Senior Lecturer Dept. of Civil Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 2019
Email: [email protected]
Dr HKG Punchihewa Senior Lecturer Dept. of Mechanical Engineering, University of Moratuwa
Tele: 0112 640 475
Email: [email protected]
Dr YWR Amarasinghe Senior Lecturer Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4506
Email: [email protected]
Dr (Mrs) MMID Manthilake Senior Lecturer Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4505
Email: [email protected]
Dr M Narayana Senior Lecturer Dept. of Chemical & Process Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4107
Email: [email protected]
Dr MA Wijewardane Senior Lecturer Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4516
Dr RACP Ranasinghe Senior Lecturer Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4503
Email: [email protected]
Mr. ATD Perera Lecturer (Contract) Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301 Ext: 4009
Email: [email protected]
Mr. MPG Sirimanna Lecturer (Contract) Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301
Email: [email protected]
Mr. KKMNP Samraweera Lecturer (Contract) Dept. of Mechanical Engineering, University of Moratuwa.
Tele: 0112 650 301
Email: [email protected]
Mr. K Illeperuma Visiting Lecturer Ceylon Electricity Board
Tele: 0714 150 724
Email: [email protected]
Mr. MMR Pathmasiri Visiting Lecturer Sri Lanka Sustainable Energy Authority
Tele:
Email:
Mr RNR Jayarathne Visiting Lecturer Central Environmental Authority
Tele: 0718 012 177
Email: [email protected]
MEng/PG Diploma in Energy Technology
Dept. of Mechanical Eng., University of Moratuwa Page 16
Notes: