denkovi assembly electronic

Categories

Relay Boards

USB Relay Boards

LPT Relay Boards

SNMP Controllers

SNMP Data Acquisition Kits

Converters

Packing machines

Components

All products

New Products

BP5221

Price: $5.90

Home › SNMP Data Acquisition Kits › Internet/Ethernet Four Channel Relay Board

Internet/Ethernet Four Channel Relay Board

Description

Set of IP SNMP controller and Four channel Relay crad. The system may be controlled by WEB browser, windows

application or SNMP commands.

Shopping Cart

Cart is empty.

Currencies

Recently Viewed

Internet/Ethernet Four

Channel Relay Board

Price: $87.50

Bestsellers

USB Eight Channel Relay

Board for Automation - 12V

Select Language Skype View Cart

Home Our conditions Partners Contact Us

Welcome Francesco Rago! Log Out

Denkovi Assembly Electronics ltd: Internet/Ethernet Four Channel Relay Board http://www.denkovi.com/product/40/internet-ethernet-four-channel-relay-board.html

1 di 10 12/10/2010 11.58

SNMP and Web based Data

Acqusition I/O Module

Price: $126.00

USB Eight Channel Relay

Board for Automation - 12V

Price: $46.50

Latest News

Store Is Open

29 Jul 2009

Subscribe | View all news

Code: DAEnetIP1 + DAE-RB/Ro4_v2

Manufacturer: Denkovi Assembly Electronics ltd.

Weight: 0.150 Kgs

Buy

Price: $87.50

Quantity:

General description

This is set of DAEnetIP1 and Relay card with 4 relays. It is autonomic ethernet device. Just connect the set into your local

network or internet and control it from remote PC. You may use special software (DAEnetIP1 manager) or web browser toswitch ON/OFF each relay. The relay card is connected to JP3 of DAEnetIP1. You are free to use the rest of DAEnetIP1

ports for your needs.

Application examplesSecurity and fire alarm systems

Manual or automatic device restart if event occur

Management/monitoring for industrial

Sensor information processing

Remote electrical devices control

Remote Lock/unlock doors

Suitable for school and university education

The kit:

DAEnetIP1 Ethernet controller - DAEnetIP1

4 Channel Relay Board - DAE-RB/Ro4_v2

3 metal self-tracking spacers

You will receive the kit assembled

4 Channel Relay Board description

4 relays (SPDT) OMRON G5LA-1-CF

Led indicator for each relay

Price: $46.50

4 Relay Board for your PIC,

AVR Project - 24V

Price: $16.50

8 Relay Board for your PIC,

AVR Project - 24V

Price: $30.35

Send to friendRate this productAdd to wishlist

Detailed Description Related Products


2 di 10 12/10/2010 11.58

Supply: 12VDC - from DAEnetIP1. The power source must be STABILIZED 12VDC.

The low input level means the relay is ON, the high - OFF

DAEnetIP1 description

DAEnetIP1 is powerful and easy for use at the same time ethernet controller for remote monitoring and control via internet.

No programing skills needed. Just connect DAEnetIP1 to your LAN or wireless router for example and you may control

different elcetrical devices, scan sensors, make pulses with adjustable width and so on. If you connect for example in

suitable way thermo sensor to one of the eight analog inputs and relay to one of the eight digital outputs you have

standalone thermoregolator without even need of LAN connection. The auction contains some additional instructions how to

access input/output lines of DAEnetIP1(via WEB browser IE/Mozilla, DAEnetIP1 manager or SNMP commands via

command promt).

DAEnetIP1 Parameters

10/100 Full duplex Ethernet interface

SNMP v1 TRAP

SNMP v.1 (snmpget,snmpset)

WEB interface with authorization

8 Digital inputs/outpus

8 Digital outputs

4 Digital outputs for relays

8 Analog inputs (each is with 10 bit resoution)

Onboard temperature sensor

Power supply: 12V DC (the middle pin is +12VDC)

Consumtion: 117mA/12V DC

Integrated overvoltage protection

Working temperature from 0 to +70 Celsius

Storage temperature from -40 to +125 Celsius

Humidity from 10% to 80% non-condensing

DAEnetIP1 connection to the Ethernet network is done with UTP Cat.5 cable with RJ45 connector. Auto MDIX. 8 seconds

after power on, the device is ready for work. For more information - user manual

Connecting DAEnetIP1 to router


3 di 10 12/10/2010 11.58

Connecting DAEnetIP1 to PC


4 di 10 12/10/2010 11.58

DAEnetIP1 schematic description

JP4 – 8 x ADC inputs

JP1 – 8 x digital outputs (GPO)

JP2 – 8 x digital I/O (GPIO)

J1 – Unused

RJ-45 – UTP cable connector

Power jack – power connector

Relay board terminal – 4 digital outputs for relays

LEDs:

“power” – power 12V DC ready

“link” – Ethernet activity LED.

“voltage control” – power 3.3V DC ready


5 di 10 12/10/2010 11.58

DAEnetIP1 I/O ports description - GPO (JP1)

Pin No. bit Func direction pull-up buffer

1 0 GPO OUT 3v3/4k7 100 ohm








9 - GND - - -

10 - 3v3 - - -

DAEnetIP1 I/O ports description - GPIO (JP2)


1 0 GPIO IN/OUT 3v3/4k7 100 ohm








9 - GND - - -

10 - 3v3 - - -

DAEnetIP1 I/O ports description - Relay outputs (JP3)



6 di 10 12/10/2010 11.58

1 0 GPO OUT 3v3/2k2 -

2 1 GPO OUT 3v3/2k2 -

3 2 GPO OUT 3v3/2k2 -

4 3 GPO OUT 3v3/2k2 -

5 - PWR_EN OUT - -

6 - Vin OUT - -

7 - Vin OUT - -

8 - GND - - -

9 - GND - - -

10 - GND - - -

DAEnetIP1 I/O ports description - ADC (JP4)


1 0 Channel 0 Ain - -








9 - GND - - -

10 - V ref - - -

DAEnetIP1 Configuration

Fisrt of all when run DAEnetIP1 for first time you have to connect it to the PC - directly to the LAN card. This is initializing

and test procedure. The steps you have to do :

Connect DAEnetIP1 to the PC via "crossover" UTP network cable.

Supply the controller with 12 VDC. The middle pin in the power terminal is "+".

Adjust your PC LAN properties. The IP must be 192.168.0.x ( We recommend 192.168.0.1 ). The mask must be

255.255.255.0

Use DAEnetIP1 manager, web browser or command line (type directly SNMP commands via net-snmp) to manage

DAEnetIP1.

These steps are common, it doesn't matter what is the way in you controll the DAEnetIP1.

Access JP1 via DAEnetIP1 manager


7 di 10 12/10/2010 11.58




8 di 10 12/10/2010 11.58

Access JP4 via DAEnetIp1 manager


9 di 10 12/10/2010 11.58

Email: [email protected] Phone: +359883367051

Useful links

DAEnetIP1 manager - you may access the ethernet module directly via windows with user-friendly interface. This is java

application so you need to have JVM installed on your PC before use DAEnetIP1 manager. The source of DAEnetIP1manager is not free, but I am ready to give you hints by email or skype.

DAEnetIP1 user manual (English)

3CServer - free TFTP server. It is necessary to run this application before update DAEnetIP1 via TFTP

Guide how to use 3CServer with DAEnetIP1

Netsnmp - free windows command line tool for executing SNMP commands

Step by step guide how to install windows command line application (netsnmp) for executing SNMP commands

The .mib file for DAEnetIP1

The .bin file with the current actual version for DAEnetIP1

Free powerful SNMP java library - here

Home | Returns | About Us | Member Login | F.A.Q. | Register | Contact Us | Search | Privacy Policy | Terms & Conditions

Powered by Summer Cart


10 di 10 12/10/2010 11.58

denkovi assembly electronic

Documents