dehylub 4039 request quote or samples€¦ · emery oleochemicals gmbh t: +49 211 5611 2000 e:...

Composition : 2-EthylhexylaAzelate Typical Properties : Parameter Range Appearance Slightly yellow liquid Acid Value (mg KOH/g) 0 - 1.0 Refractive Index (20 °C) 1.4450 - 1.4510 Moisture (%) 0 - 0.1 Hydroxyl Value (mg KOH/g) 0 - 2.2 Flashpoint (°C) > 210 Pour Point (°C) < -70 Density @ 20°C (g/cm³) 0.9130 - 0.9190 Kinematic Viscosity @ 40°C (mm²/s) 10 - 13 Applications : DEHYLUB ® 4039 is a lubricant which can be used in: • Engine oils • Gear and transmission oils • Greases Forms of Delivery : Liquid in drums and bulk containers Storage : Product stored in the original closed packaging under ambient conditions should Information be stable for at least 2 years DEHYLUB ® 4039 www.emeryoleo.com Emery Oleochemicals GmbH T: +49 211 5611 2000 E: [email protected] Emery Oleochemicals LLC T: +1 513 762 2500 E: [email protected] Emery Oleochemicals (M) Sdn Bhd T: +603 3326 8686 E: [email protected] Disclaimer: The content in this document is provided on an “as is” and “as available” basis purely for informational purposes and, unless and to the extent speciﬁcally agreed otherwise for a sales transaction, does not constitute any warranty, whether express, implied or statutory, including but not limited to warranties or guarantees of merchantability, ﬁtness or suitability for a particular purpose nor any representations of a binding nature. EMERY OLEOCHEMICALS EXPRESSLY DISCLAIMS ANY RESPONSIBILITY FOR THE SUITABILITY OF THE PRODUCTS FOR ANY SPECIFIC OR PARTICULAR PURPOSES INTENDED BY THE USER. Suggestions for the use and application of the products and guide formulations are for informational purposes only and you are advised to carry out any necessary steps to test the suitability of the products for your intended processes and purposes. You are solely responsible for compliance with all applicable laws and regulations in use of the products including any third party intellectual property rights and shall bear all liability or risk arising from use of the products. All indications marked with a TM or ® symbol are trademarks belonging to legal entities within the Emery Oleochemicals group of companies. Updated: 01-03-2017 distributed by: Request Quote or Samples distributed by: Request Quote or Samples

Upload: others

Post on 19-Oct-2020

1 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Composition : 2-EthylhexylaAzelate

Typical Properties : Parameter Range Appearance Slightly yellow liquid Acid Value (mg KOH/g) 0 - 1.0 Refractive Index(20°C) 1.4450 - 1.4510 Moisture (%) 0 - 0.1 Hydroxyl Value (mg KOH/g) 0 - 2.2 Flashpoint (°C) > 210 PourPoint(°C) <-70 Density @ 20°C (g/cm³) 0.9130 - 0.9190 KinematicViscosity@40°C(mm²/s) 10-13

Applications : DEHYLUB®4039isalubricantwhichcanbe usedin: • Engine oils • Gear and transmission oils • Greases

Forms of Delivery : Liquid in drums and bulk containers

Storage : Product stored in the original closed packaging under ambient conditions shouldInformation be stable for at least 2 years

DEHYLUB® 4039

www.emeryoleo.com

Emery Oleochemicals GmbHT:+4921156112000 E: [email protected]

Emery Oleochemicals LLCT:+15137622500E: [email protected]

Emery Oleochemicals (M) Sdn BhdT:+60333268686 E: [email protected]

Disclaimer: The content in this document is provided on an “as is” and “as available” basis purely for informational purposes and, unless and to the extent specifically agreed otherwise for a sales transaction, does not constitute any warranty, whether express, implied or statutory, including but not limited to warranties or guarantees of merchantability, fitness or suitability for a particular purpose nor any representations of a binding nature. EMERY OLEOCHEMICALS EXPRESSLY DISCLAIMS ANY RESPONSIBILITY FOR THE SUITABILITY OF THE PRODUCTS FOR ANY SPECIFIC OR PARTICULAR PURPOSES INTENDED BY THE USER. Suggestions for the use and application of the products and guide formulations are for informational purposes only and you are advised to carry out any necessary steps to test the suitability of the products for your intended processes and purposes. You are solely responsible for compliance with all applicable laws and regulations in use of the products including any third party intellectual property rights and shall bear all liability or risk arising from use of the products. All indications marked with a TM or ® symbol are trademarks belonging to legal entities within the Emery Oleochemicals group of companies.

Updated:01-03-2017

distributed by:

Request Quote or Samples

distributed by:

Request Quote or Samples
https://www.tri-iso.com/request-quote.htmlhttps://www.tri-iso.com/request-quote.html