• If there is no fire, stay in the vehicle. Wait for rescue.
• If the vehicle catches fire do not exit using 3-point method.
• Jump from the vehicle landing feet close together.
• Shuffle step away with small foot movements not lifting your feet.
15
Underground HazardUnderground Hazard
16
Electrical Tool HazardElectrical Tool Hazard
17
Get Them Repair or Replace.
Extension Cord HazardExtension Cord Hazard
18
Remove and replace damaged electrical cords.
Extensions CordsExtensions Cords
19
DO NOT REPAIR WITH ELECTRICAL
TAPE
Welding Safety MatWelding Safety Mat
20
Arc Flash HazardArc Flash Hazard
21
Arc Flash HazardArc Flash Hazard
22
Arc Flash SimulationArc Flash Simulation
23
Take The TestTake The Test
• What Hazards are there in the following scenes.
24
25
Recognize Any Hazard(s)?Recognize Any Hazard(s)?
26
YesYesNo employer shall permit a worker to work in such proximity to any part of an electric power circuit that the worker could contact the electric power circuit in the course of work
27
Recognize Any Hazard(s)?Recognize Any Hazard(s)?
28
YesYes
Crossing electrical line Crossing electrical line must be supported, must be supported,
protected or removed to protected or removed to safeguard workerssafeguard workers
1. No GFCI2. System not grounded3. Openings where conductors entered not closed4. No cover on boxes 5. Panel boards were not dead front
33
Recognize Any Hazard(s)?Recognize Any Hazard(s)?
34
YESYES
Electric drill flexible cord
was spliced to a non-flexible conductor with
damaged insulation
35
Recognize Any Hazard(s)?Recognize Any Hazard(s)?
36
Yes Yes
Scaffold was erected 4 ½ feet from 7.2 kV power lines
37
Recognize Any Hazard(s)?Recognize Any Hazard(s)?
38
YESYESContinuous
path to ground not maintained;
multiple cords used
for fixed equipment
39
Recognize Any Hazard(s)?Recognize Any Hazard(s)?
40
YESYESEmployer was
operating a stand fan without
grounding protection
41
Recognize Any Hazard(s)?Recognize Any Hazard(s)?
42
YesYes
Conductors entering boxes, Conductors entering boxes, cabinets, or fittings shall be cabinets, or fittings shall be protected from abrasion. protected from abrasion. Openings through which Openings through which conductors enter shall be conductors enter shall be effectively closedeffectively closed
43
Recognize Any Hazard(s)?Recognize Any Hazard(s)?
44
YesYes
Flexible cords and cables may pass through doorways
or other pinch points, if protection is provided to avoid