datacart dct-1b part guide
DESCRIPTION
DataCart by Lund Industries DCT-1B Part GuideTRANSCRIPT
Part Guide
(847) - 459 - 1460Mobile Point-Of-Care Computing Anytime. Anywhere.
DCT-1B and DCT-1B3 Laptop DataCart
Bumper Pads(P/N: P1036M)
5 Inch Wheel without Brake (4 Inch available)
5 Inch Wheel With Brake (4 Inch available)
DCT-1-Base
½” Spacing Nut
4” Wheel without BrakeP/N: DCT-TWUNS100GGT25
5” Wheel without BrakeP/N: DCT-TWUNS125UT26GR
4” Wheel with BrakeP/N: DCT-TWUNS100GGT26B
5” Wheel with BrakeP/N: DCT-TWUNS125UT26GRB
Varistand Strut
(3) M6 x 1.0 x 30Upper Strut
Mounting Bumpers
(2) M6 x 1.0 x 20Bottom Mounting Bolts
Bottom Mounting Pin
Collar Mounting Pin
Cylinder
Collar(P/N: 065-52015)
Bottom of DCT-1 Base
Reinforcement Disk(2) ¼ - 20 Nylock
(P/N: DCT-150-150)
Bottom ofVaristand StrutM6 x 1.0 x 20
Part Guide
DCT-Top
(847) -459 -1460Mobile Point-Of-Care Computing Anytime. Anywhere.
Slide OutKey Board Tray
(P/N: 150-119-ST)
(5) 1 Inch Spacers for Laptop Height Adjustment
(P/N: DN205-481-18)Requires (5) 8-32 x 1¼ ”
Laptop Shelf(P/N: 150-001-15-3)
Lock Cam(P/N: 150-123)
Combi Cam Lock(P/N: 7805S-BLK)
(Front)
Mouse Holder(P/N: 133-691)
(2) 8/32x ½” Nut and Bolt
Cord Holder Bracket(P/N: 133-039)
(2) 10/32x3/8 Bolt
Height Adjust Lever(P/N: 169-52000)
OptionalAdjustable Screen Support
(P/N: 150-A15)
OptionalScanner Bracket(P/N: SB-9535)10/32x1/2 Bolt, Washer and Nut
Laminate Top(P/N: 150-146-L)
Handle(P/N: 150-147-S)
¼-20 x1” Bolt and Washer
Tension Adjustment¼ -20 x 7/8”
Carriage Bolt with ¼ -20 Nylock Nut
Optional Scanner Clip(P/N: 150-162)(2) 10/32x1/2”
Nylock Nut and Bolt
Mouse Tray(P/N: 133-690)
Optional Wire Basket
(P/N: BA-45128)4.5x12x8”
(2) 10/32x1/2” Nylock Nut and
Bolt
Basket Bracket(P/N: BSK-BRKT)
(2) ¼ -20x3/4”Nylock Nut, Bolt
and Washer
AC Power CordAvailableLengths: 10’ Coil Cord
12’ Straight Cord14’ Coil Cord