danielle fleming\'s creative portfolio
TRANSCRIPT
KitchenAid® Architect® Series II...Build the Kitchen of Your Dreams
2
KitchenAid® ARCHITECT® SERIES II
Architect Series II Appliances showcase thoughtful innovations that are essential in the avid cook’s kitchen.
Good cooking doesn’t simply happen. There can be hours, days, even weeks of planning,
shopping and preparing. It’s a process that requires passion and commitment – that’s why
it’s called artistry. And nothing complements your artistry more than appliances that respond
to your touch in the same way a trusted spatula fits in your hand.
Since introducing our legendary stand mixer in 1919, followed by our dishwasher in
1949, KitchenAid has created appliances that heighten every cook’s passion for a great
kitchen. All of our products and innovations are designed to delight your senses, reward
your creativity, and to enhance your cooking experience – giving you the freedom to
experiment in ways you’ve always dreamed.
The Architect Series II is an evolution of performance and intuitive design that captures
the attention of all your senses. We’ve combined the best of our original Architect Series
with a host of enhancements, offering an enticing suite of kitchen appliances inspired by,
and created for, those who love to cook and entertain.The timeless appearance of the
Architect Series II comes in the form of robust contoured knobs, rounded corners, and
seamless stainless steel edges. Efficient performance is reflected in adjustable settings,
intuitive displays and control graphics, and complementary features designed to work
together for a smooth cooking experience. Achieve Your Home and Culinary Dreams
14 15
18 / "15 / "
29 / "18 / "
KHMS2050S 81572/3/4/9
2" x 4"
12"13"
69"
33"
30"
{ELECTRIC RANGE}{DUAL FUEL RANGE AND GAS RANGE}
*When installed in a 24" base cabinet with 25" countertop; front of oven door protrudes 1" beyond 24" base cabinet.
30"
*27 / " to handle
Cabinet opening dimensions shown are for 25" countertop depth, 24" base cabinet depth, and 36" countertop height.
Note: 24" minimum when bottom of wood or metal cabinet is protected by not less than / " flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
30" minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
18"upper cabinet to countertop
For minimum clearance to top of cooktop, see Note.*
Cab inet door or hinge should not
ext end in to the cut out.
30"
5 / "
41 / " overall height
36" cooktop height with leveling legs in lowest position
30" min.opening width
13" max. upper cabinet depth
Junction box –8" to 22"
from either cabinet, 7" max. from floor.
*
If inst alling a hood or m icro wave hood c omb inatio n abov e the range , follow hoo d or micro wave hood c omb inatio n inst allatio n inst ruct ion s for dime nsional clea ran ces above the cook top sur face.
30" min.opening width
4" min.clearance from both sides of range to side wall or other combustible material.
*When installed in a 24" base cabinet with 25" countertop; front of oven door protrudes 1 / " beyond 24" base cabinet.
30 / "
35 / " cooktop height with leveling legs in lowest
position
*27 / " to handle
23"
from notch to the back of range
side panels
Cabinet opening dimensions shown are for 25" countertop depth, 24" base cabinet depth, and 36" countertop height.
Note: 24" minimum when bottom of wood or metal cabinet is protected by not less than / " flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
30" minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
30" min.opening width
18"upper cabinet to countertop
4" min.clearance from both sides of range to side wall or other combustible material between upper cabinet and countertop.
223/4"opening depth
30" min.opening width
For minimum clearance to top of cooktop, see Note.*
1/4"radius both
corners
30"
13" max. upper cabinet depth
Junction box –8" to 22"
from either cabinet, 7" max. from floor.
*
If installing a hood or microwave hood combination above the range, follow hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
Cabinet door or hinge should not
extend into the cutout.
KDSS907S21383
KGSS907S21272/3/4/9
KGSK901S21262/3/9
KDRS807S67643
KGRS807S67632/3/4/9
*When installed in a 24" base cabinet with 25" countertop; front of oven door protrudes 1" beyond 24" base cabinet.
Cabinet opening dimensions shown are for 25" countertop depth, 24" base cabinet depth, and 36" countertop height.
For minimum clearance to top of cooktop, see Note.*
30" min.opening width
41/2"
8"
8"7"
41/2"
30" min.opening width
18"upper cabinet to countertop
13" max. upper cabinet depth
5" min. clearance from both sides of range to side wall or other combustible material.
Note: 24" minimum when bottom of wood or metal cabinet is protected by not less than / " flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
30" minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a hood or microwave hood combination above the range, follow hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
*
This shaded area recommended for installation
of rigid gas pipe.
Grounded outlet
11/2"
5 / "
30"
41 / " overall height
27 / " from handle to
standoff at back of range*
36" cooktop height with leveling legs in lowest position
Cabinet door or hinge should not
extend into the cutout.
Cabinet opening dimensions shown are for 25" countertop depth, 24" base cabinet depth, and 36" countertop height.
Note: 24" minimum when bottom of wood or metal cabinet is protected by not less than / " flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
30" minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a hood or microwave hood combination above the range, follow hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
*
41/2"
11/2"
8"7"
41/2"
30" min.opening width
35 / " cooktop height with leveling legs in lowest
position
27 / " from handle to
standoff at back of range*
30"
*When installed in a 24" base cabinet with 25" countertop; front of oven door protrudes 1 / " beyond 24" base cabinet.
23"from notch to
the back of range side panels
30 / "
8"
13" max. upper cabinet depth
30" min. opening width
3/4" radius both
corners
Grounded outletThis shaded area
recommended for installation of rigid gas pipe.
2215/16" opening depth
For minimum clearance to top of cooktop, see Note.*
18"upper cabinet to countertop
5" min. – KGSS907S
2" min. – KGSK901Sclearance from both sides of range to side wall or other combustible material.
Cabinet door or hinge should not
extend into the cutout.
KESS908S21212/3/9
KESS907S21202/3/4/9
KESK901S21192/3/9
KERS807S 67622/3/4/9
COOKING RANGES DIMENSIONS MICROWAVE DIMENSIONS
5 / " dia. vent collar
interchangeable front trim
20 / "
Width
9 / "
KHTU705S (30”)58243
KHTU765S (36”) 58253
UNDER-THE-CABINET HOOD DIMENSIONS
KUDS03FS 19512/3/4/9
KSCS25FS2702/3/9
237/ 8"Recessed
width
491/ 2"
241/ 2"
313/ 16"115/ 16"
337/ 8" min.
341/ 2" max.
Cut openings in shaded area of cabinetwalls or floor as specified in chart:
Measured from the lowest point on theunderside of countertop. May be reduced to33 / " by removing wheels from dishwasher.Minimum, measured from narrowest pointof opening.
***
*
**
May be increased to 6 / " if height of opening is 34 / " at its lowest point.
24"**
24" min.
All surfaces must be free from intrusions
OPENING FOR: DIAMETER:water linedrain linedirect wirepower supply cord
/ "1 / "/ "1 / "
34" min.*
3 / "
5 / "2"
6"***
2 / " 3 / "
9"2"
10"3 / " 2 / "
6"***
3 / "
2"
DISHWASHER DIMENSIONS
REFRIGERATOR DIMENSIONS{COUNTER DEPTH SIDE-BY-SIDE}
3 / 35 /
67 /
21 /
66
3 /
71 /
24"
1
35 / "
27 / "
30 / "
2 / "19 / "15 / "
71 / 71 /
FRONT VIEW SIDE VIEW
TOP VIEW
Rob GarrettCEO
4409 Hoffner Ave. #317 M 407-448-1919 T 1-888-638-3772 Orlando, FL 32812 E [email protected] www.liquidsiding.com
Street Number/Name, City, State Zip Code ● T 407.XXX.XXXX ● F 407. XXX.XXXX ● E [email protected] ● www.liquidsiding.com
Street Number/Name, City, State Zip Code
2 0 1 1 R E T A I L O P E R A T I O N S C O N F E R E N C E
WeWill LEADING THE WAY
2011 RETAIL OPERATIONS CONFERENCE
LEADING THE WAY
2011 RETAIL OPERATIONS CONFERENCE
Color Combination 1
Color Combination 2