czech vocational projects – engineering and plastic industries by requalification centre opava
TRANSCRIPT
„RETRAIN YOUR EMPLOYEES IN OUR CENTRE or
SELECT FROM OUR SUCCESSFUL GRADUATES!“
1.
2.
3.
EU Projects of Requalification Centre Opava
Requalification Centre for Multidemensional ProcessingProject 1
Within this project the „Requalification Centre for Multidemensional Processing“ was established. The retraining pilot course „OPERATOR AND PROGRAMMER OF CNC MACHINES” have taken place there.
Budget: 125 716 EURExecution of project: 2005 – 2006Grant Programme: PHARE 2003, Human Recourses Development
Requalification Centre for Multidemensional ProcessingProject 1
PROJECT OUTPUTS» 3 rounds of the course» 62 people were retrained» 55 successful graduates» 43 people were given job after graduation
Precision Machining Retraining Centre (PMRC)Project 2
PMRC represents an educational project under which the „PROGRAMMING AND OPERATION OF CNC MACHINES” retraining course takes place. The course concerns the programming and operation of multi-dimensional 3D and 5D machines used in automotive and aerospace precision engineering.
Budget: 5 944 535 CZKExecution of project: 2006 - 2008Grant Programme: European Social Fund (OP RLZ)
Precision Machining Retraining Centre (PMRC)Project 2
PROJECT OUTPUTS» 5 rounds of the course» 76 people were retrained» 61 successful graduates» 47 people were given job after graduation
PMRC II is a project, under which the following retraining courses have taken place:
PROGRAMMING AND OPERATION OF CNC MACHINES
CNC PROGRAMMING AND OPERATION INSTRUCTORS
Key idea of the project: to create convenient, compact and functioning methodology focused on instructor training.
Precision Machining Retraining Centre II (PMRC II)Project 3
Budget: 5 482 530 CZKExecution of project: 2006 - 2008Grant Programme: European Social Fund (OP RLZ)
Precision Machining Retraining Centre II (PMRC II)Project 3
PROJECT OUTPUTS» 12 instructors were retrained» 12 successful graduates
Building-up the Training Centre in KBA-Grafitec
ABOUT PROJECTBudget: 21 230 000 CZK
Execution of project: 2008 - 2011
Grant Programme: European Social Fund (OPPI – Training Centres)
Aim of the project: to provide high-quality backround for management and
implementation of human recourses development activities within the company.
Training Centre in KBA-Grafitec
ABOUT COMPANYKoenig & Bauer AG is a German multinational - the
second largest printing presses producer in the world. KBA employs more than 7000 employees, primarily in Germany and the U.S.A. In 2004, company's turnover reached 1.423 billion Euro.
Training Centre in KBA-Grafitec
Specifics of Training centre:» building capacity: 112 seats» utilization: 77 %» 4 classrooms (50 seats)» Hands-on training centre (6 work places)» Auditorium (56 seats)» barier free entrance» lift, outside circular stair» parking area (19 pull-in)» changing rooms, toilet facilities» kitchenette
Building-up the Training Centre in KBA-Grafitec
Training Centre in IVAX Pharmaceuticals
ABOUT PROJECTBudget: 18 030 000 CZK
Execution of project: 2009 - 2010
Grant Programme: European Social Fund (OPPI – Training Centres)
Aim of the project: to provide high-quality backround for management and
implementation of human recourses development activities within the company.
Training Centre in IVAX
ABOUT COMPANYIVAX Pharmaceuticals s.r.o., originally known as Galena, is an
important traditional producer of pharmaceuticals. Trhe products are exported to many countries of the world including the USA and Western Europe. The company successful operation is accomplished by approximately 850 employees. In 2006 the company became a part of the multinational group TEVA.
Training Centre in IVAX Pharmaceuticals
Specifics of Training centre:» building capacity: 78 seats» utilization: 74 %» 2x classrooms (40 seats)» 1x computer classrom (18 seats)» Hands-on training centre (4 work places)» Laboratory (16 seats)» changing rooms, toilet facilities» kitchenette
Training Centre in IVAX Pharmaceuticals
LINASET Training Centre
ABOUT PROJECTBudget: 23 716 000 CZK
Execution of project: 2006 - 2008
Grant Programme: European Social Fund (OPPP – Training Centres)
Aim of the project: to provide high-quality backround for management and
implementation of human recourses development activities within the company.
LINASET Training Centre
ABOUT COMPANYLinaset is a producer of thermosetting plastics through direct
pressing, transfer and injection molding. Linaset offers a comprehensive service starting with the
development of molding, through working out of drawing documentation and production of mold to deliveries of individual moldings and/or finished parts. Company employs more than 550 employees.
LINASET Training Centre
LINASET Training Centre
Specifics of Training centre:» building capacity: 20 seats» utilization: 78 %» classroom (20 seats)» Hands-on training centre» changing rooms, toilet facilities» kitchenette
CORPECI Training Centre
ABOUT PROJECTBudget: 13 630 248 CZK
Execution of project: 2006 - 2008
Grant Programme: European Social Fund (OPPP – Training Centres)
Aim of the project: to provide high-quality backround for management and
implementation of human recourses development activities within the company.
COPRECI Training Centre
ABOUT COMPANYCOPRECI has been producing and supplying components for the
household appliance sector since 1963.COPRECI is part of Mondragón Corporación Cooperatiova (MCC),
the foremost business group in the Basque Country and seventh in the ranking of Spain´s largest businesses.
COPRECI CZ employs more than 200 employees.
CORPECI Training Centre
COPRECI Training Centre
Specifics of Training centre:» building capacity: 72 seats» utilization: 75 %» 2 classrooms (72 seats)» changing rooms, toilet facilities» kitchenette
děkuje za pozornost
DC VISION, s.r.o. – Krnovská 58 – 746 01 Opava www.dcvision.cz tel/fax +420 553 654 816 e-mail [email protected]
Contact PersonLibor Witassektel/fax +420 123 456 789 e-mail [email protected]
DC VISION, s.r.o. – ZIRKON Office Center – Sokolovská 84-86 – 186 00 Prague - Karlín www.dcvision.cz tel/fax +420 e-mail [email protected]