customs tariff - schedule · customs tariff - schedule tariff item ss description of goods unit of...

CUSTOMS TARIFF - SCHEDULE

73 - i

Issued January 1, 2018

Chapter 73

ARTICLES OF IRON OR STEEL Notes

1. In this Chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.

2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional

dimension exceeds 16 mm.

73 - 1

Issued December 30, 2018


Tariff Item SS Description of Goods Unit of

Meas.MFNTariff

ApplicablePreferential Tariffs

73.01 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel.

7301.10.00 00 -Sheet piling TNE Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7301.20.00 -Angles, shapes and sections Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Of a height not exceeding 635 mm ........................................................ TNE20 - - - - -Of a height exceeding 635 mm .............................................................. TNE

73.02 Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails.

7302.10.00 -Rails Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

- - - - -Heat treated:11 - - - - - -Of a weight not exceeding 57 kg/m ..................................................... KGM12 - - - - - -Of a weight exceeding 57 kg/m but not exceeding 67 kg/m ................ KGM13 - - - - - -Of a weight exceeding 67 kg/m ........................................................... KGM

- - - - -Not heat treated:21 - - - - - -Of a weight not exceeding 57 kg/m ..................................................... KGM22 - - - - - -Of a weight exceeding 57 kg/m ........................................................... KGM

7302.30 -Switch blades, crossing frogs, point rods and other crossing pieces

7302.30.10 00 - - -For use with grooved or girder guard rail KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

Revised December 30, 2018


73 - 2

7302.30.90 00 - - -Other KGM 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7302.40.00 00 -Fish-plates and sole plates TNE Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7302.90.00 00 -Other KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7303.00.00 Tubes, pipes and hollow profiles, of cast iron. Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Soil pipes................................................................................................ KGM20 - - - - -Pressure pipes........................................................................................ KGM90 - - - - -Other ...................................................................................................... KGM

73.04 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel.

-Line pipe of a kind used for oil or gas pipelines:

7304.11.00 00 - -Of stainless steel KGM Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7304.19.00 - -Other Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Of iron or non-alloy steel ........................................................................ KGM20 - - - - -Of alloy steel........................................................................................... KGM

-Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:



Meas.MFNTariff



73 - 3


7304.22.00 00 - -Drill pipe of stainless steel KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7304.23.00 - -Other drill pipe Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Of iron or non-alloy steel ........................................................................ KGM20 - - - - -Of alloy steel .......................................................................................... KGM

7304.24.00 00 - -Other, of stainless steel KGM Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7304.29.00 - -Other Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

- - - - -Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm:

11 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification ......................................................................................... KGM

19 - - - - - -Other .................................................................................................... KGM- - - - -Casing, of an external diameter exceeding 177.8 mm but not exceeding

298.5 mm:21 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary

specification ......................................................................................... KGM29 - - - - - -Other .................................................................................................... KGM

- - - - -Casing, of an external diameter exceeding 298.5 mm:31 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary

specification ......................................................................................... KGM39 - - - - - -Other .................................................................................................... KGM

- - - - -Tubing:81 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification .. KGM89 - - - - - -Other .................................................................................................... KGM

-Other, of circular cross-section, of iron or non-alloy steel:

7304.31.00 - -Cold-drawn or cold-rolled (cold-reduced) Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Mechanical tubes and pipes................................................................... KGM90 - - - - -Other ...................................................................................................... KGM



Meas.MFNTariff




73 - 4


60 - - - - -Tubes and pipes, for boilers ................................................................... KGM70 - - - - -Mechanical tubes and pipes................................................................... KGM80 - - - - -Standard pipes ....................................................................................... KGM90 - - - - -Other ...................................................................................................... KGM

-Other, of circular cross-section, of stainless steel:

7304.41 - -Cold-drawn or cold-rolled (cold-reduced)

- - -Of an external diameter of less than 19 mm:

7304.41.11 00 - - - -For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the distillation or recovery of products from natural gas

KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7304.41.19 00 - - - -Other KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

- - -Other:

7304.41.91 00 - - - -For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the distillation or recovery of products from natural gas


7304.41.99 00 - - - -Other KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


40 - - - - -Hollow profiles ........................................................................................ KGM90 - - - - -Other ...................................................................................................... KGM



Meas.MFNTariff



73 - 5


-Other, of circular cross-section, of other alloy steel:

7304.51.00 00 - -Cold-drawn or cold-rolled (cold-reduced) KGM Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


50 - - - - -Mechanical tubes and pipes................................................................... KGM90 - - - - -Other ...................................................................................................... KGM

7304.90.00 -Other Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


73.05 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel.


7305.11.00 - -Longitudinally submerged arc welded Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


7305.12.00 - -Other, longitudinally welded Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free





Meas.MFNTariff




73 - 6


7305.20.00 00 -Casing of a kind used in drilling for oil or gas KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

-Other, welded:

7305.31.00 - -Longitudinally welded Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

- - - - -Of iron or non-alloy steel:11 - - - - - -Standard pipes ..................................................................................... KGM19 - - - - - -Other .................................................................................................... KGM20 - - - - -Of alloy steel........................................................................................... KGM



7305.90.00 -Other Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


73.06 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.


7306.11.00 00 - -Welded, of stainless steel KGM Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free



Meas.MFNTariff



73 - 7



10 - - - - -Of an A.P.I. grade not exceeding X-52................................................... KGM90 - - - - -Other ...................................................................................................... KGM

-Casing and tubing of a kind used in drilling for oil or gas:

7306.21.00 00 - -Welded, of stainless steel KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


- - - - -Casing, of an external diameter of 114.3 mm or more but not exceeding 177.8 mm:


19 - - - - - -Other .................................................................................................... KGM- - - - -Casing, of an external diameter exceeding 177.8 mm:


59 - - - - - -Other .................................................................................................... KGM- - - - -Tubing:

61 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification .. KGM69 - - - - - -Other .................................................................................................... KGM

7306.30.00 -Other, welded, of circular cross-section, of iron or non-alloy steel Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Galvanized, of an external diameter not exceeding 114.3 mm .............. KGM20 - - - - -Other, of an external diameter not exceeding 114.3 mm ....................... KGM30 - - - - -Of an external diameter exceeding 114.3 mm ....................................... KGM

7306.40.00 -Other, welded, of circular cross-section, of stainless steel Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Of an external diameter not exceeding 25.3 mm ................................... KGM20 - - - - -Of an external diameter exceeding 25.3 mm but not exceeding 114.9

mm ......................................................................................................... KGM30 - - - - -Of an external diameter exceeding 114.9 mm ....................................... KGM



Meas.MFNTariff




73 - 8

7306.50.00 00 -Other, welded, of circular cross-section, of other alloy steel KGM Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

-Other, welded, of non-circular cross-section:

7306.61.00 - -Of square or rectangular cross-section Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


7306.69.00 - -Of other non-circular cross-section Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


7306.90.00 -Other Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


73.07 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel.

-Cast fittings:

7307.11.00 00 - -Of non-malleable cast iron KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7307.19.00 - -Other Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Unions .................................................................................................... KGM90 - - - - -Other ...................................................................................................... KGM



Meas.MFNTariff



73 - 9


-Other, of stainless steel:

7307.21.00 00 - -Flanges KGM Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7307.22.00 - -Threaded elbows, bends and sleeves Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Sleeves .................................................................................................. KGM90 - - - - -Other ...................................................................................................... KGM

7307.23.00 00 - -Butt welding fittings KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7307.29 - -Other

7307.29.10 00 - - -To be employed in pneumatically breaking down the working face of a mine in mining, quarrying or developing mineral deposits


7307.29.20 00 - - -For installation between the wellhead assembly or surface oil pumping unit and the field marketing valve at oil or natural gas wells

KGM 4.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 4.5%

- - -Other:

7307.29.91 00 - - - -Not further worked than forged or bent to shape KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free



Meas.MFNTariff




73 - 10

7307.29.99 00 - - - -Other KGM Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

-Other:

7307.91.00 - -Flanges Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


7307.92.00 - -Threaded elbows, bends and sleeves Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Of iron or non-alloy steel ........................................................................ KGM20 - - - - -Of alloy steel, other than stainless steel ................................................. KGM

7307.93.00 - -Butt welding fittings Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Of iron or non-alloy steel ........................................................................ KGM20 - - - - -Of alloy steel, other than stainless steel ................................................. KGM

7307.99.00 - -Other Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

- - - - -Of iron or non-alloy steel:11 - - - - - -Couplings ............................................................................................. KGM19 - - - - - -Other .................................................................................................... KGM

- - - - -Of alloy steel, other than stainless steel:21 - - - - - -Couplings ............................................................................................. KGM29 - - - - - -Other .................................................................................................... KGM

73.08 Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel.



Meas.MFNTariff



73 - 11


7308.10.00 00 -Bridges and bridge-sections KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7308.20.00 00 -Towers and lattice masts KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7308.30.00 -Doors, windows and their frames and thresholds for doors Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Sash, casement or frame sections, not punched, drilled or further manufactured, whether or not coated, and similar material formed from hot- or cold-rolled strip, whether or not coated, for use in the manufacture of window sash, casements or frames .............................. TNE

- - - - -Doors and their frames:21 - - - - - -Sliding .................................................................................................. NMB22 - - - - - -Domestic garage.................................................................................. NMB28 - - - - - -Other roll-up ......................................................................................... NMB29 - - - - - -Other .................................................................................................... NMB30 - - - - -Windows and their frames...................................................................... NMB40 - - - - -Thresholds for doors .............................................................................. NMB

7308.40.00 00 -Equipment for scaffolding, shuttering, propping or pit-propping KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free


10 - - - - -Ceilings, including frames for suspended ceilings ................................. KGM20 - - - - -Roofing................................................................................................... - 30 - - - - -Siding, including soffit or fascia.............................................................. - 40 - - - - -Assembled fences, including barriers or crossing gates ........................ - 50 - - - - -Flooring; Roof drainage equipment........................................................ KGM60 - - - - -Columns, pillars, posts, beams, girders and similar structural units....... KGM

- - - - -Other:95 - - - - - -Grills, air diffusers or ducts .................................................................. KGM96 - - - - - -Other architectural or ornamental work................................................ KGM99 - - - - - -Other .................................................................................................... KGM



Meas.MFNTariff




73 - 12

7309.00.00 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment.

Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

70 - - - - -Tanks ...................................................................................................... NMB90 - - - - -Other ...................................................................................................... NMB

73.10 Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment.

7310.10.00 -Of a capacity of 50 litres or more Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Cans ....................................................................................................... - 20 - - - - -Tanks ...................................................................................................... - 30 - - - - -Drums..................................................................................................... - 90 - - - - -Other ...................................................................................................... -

-Of a capacity of less than 50 litres:

7310.21.00 - -Cans which are to be closed by soldering or crimping Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -For food .................................................................................................. NMB90 - - - - -Other ...................................................................................................... NMB


10 - - - - -Tanks or drums....................................................................................... NMB20 - - - - -Cans ....................................................................................................... NMB90 - - - - -Other ...................................................................................................... NMB

7311.00.00 00 Containers for compressed or liquefied gas, of iron or steel. NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

73.12 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated.



Meas.MFNTariff



73 - 13


7312.10.00 -Stranded wire, ropes and cables Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

- - - - -Stranded wire, alloyed steel:11 - - - - - -Of a diameter not exceeding 5 mm...................................................... KGM12 - - - - - -Of a diameter exceeding 5 mm............................................................ KGM

- - - - -Stranded wire, non-alloyed steel:21 - - - - - -Of a diameter not exceeding 5 mm...................................................... KGM22 - - - - - -Of a diameter exceeding 5 mm............................................................ KGM

- - - - -Ropes and cables, containing not more than eight strands, new:31 - - - - - -Of a diameter not exceeding 25 mm.................................................... KGM32 - - - - - -Of a diameter exceeding 25 mm but not exceeding 50 mm ................ KGM33 - - - - - -Of a diameter exceeding 50 mm.......................................................... KGM

- - - - -Ropes and cables, containing more than eight strands, new:41 - - - - - -Of a diameter not exceeding 25 mm.................................................... KGM42 - - - - - -Of a diameter exceeding 25 mm but not exceeding 50 mm ................ KGM43 - - - - - -Of a diameter exceeding 50 mm.......................................................... KGM50 - - - - -Ropes and cables, used......................................................................... KGM

7312.90.00 00 -Other KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7313.00.00 00 Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel.

KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

73.14 Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel.

-Woven cloth:

7314.12.00 00 - -Endless bands for machinery, of stainless steel KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7314.14.00 00 - -Other woven cloth, of stainless steel KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free



Meas.MFNTariff




73 - 14

7314.19.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7314.20.00 00 -Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more

KGM Free CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

-Other grill, netting and fencing, welded at the intersection:

7314.31.00 00 - -Plated or coated with zinc KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7314.39.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

-Other cloth, grill, netting and fencing:

7314.41.00 00 - -Plated or coated with zinc KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7314.42.00 00 - -Coated with plastics KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7314.49.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free



Meas.MFNTariff



73 - 15


7314.50.00 00 -Expanded metal KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

73.15 Chain and parts thereof, of iron or steel.

-Articulated link chain and parts thereof:

7315.11.00 00 - -Roller chain KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7315.12.00 00 - -Other chain KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7315.19.00 00 - -Parts KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7315.20.00 00 -Skid chain KGM 6% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 3%

-Other chain:

7315.81.00 00 - -Stud-link KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7315.82.00 - -Other, welded link Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free




Meas.MFNTariff




73 - 16

7315.89.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7315.90.00 00 -Other parts KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7316.00 Anchors, grapnels and parts thereof, of iron or steel.

7316.00.10 00 - - -Of a weight of 18 kg or more NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7316.00.20 00 - - -Of a weight of less than 18 kg NMB 6% CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7317.00.00 00 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper.


73.18 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel.

-Threaded articles:

7318.11.00 00 - -Coach screws KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7318.12.00 00 - -Other wood screws KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free



Meas.MFNTariff



73 - 17


7318.13.00 00 - -Screw hooks and screw rings KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7318.14.00 00 - -Self-tapping screws KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7318.15.00 - -Other screws and bolts, whether or not with their nuts or washers Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Screws ................................................................................................... KGM- - - - -Bolts:

42 - - - - - -Hex head or machine........................................................................... KGM45 - - - - - -Studs .................................................................................................... KGM49 - - - - - -Other .................................................................................................... KGM

7318.16.00 - -Nuts Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Lock........................................................................................................ KGM90 - - - - -Other ...................................................................................................... KGM

7318.19.00 00 - -Other KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

-Non-threaded articles:

7318.21.00 00 - -Spring washers and other lock washers KGM Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free



Meas.MFNTariff




73 - 18

7318.22.00 00 - -Other washers KGM Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7318.23.00 00 - -Rivets KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7318.24.00 00 - -Cotters and cotter-pins KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7318.29.00 00 - -Other KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

73.19 Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included.

7319.40 -Safety pins and other pins

7319.40.10 00 - - -Specially designed for marking systems - Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7319.40.90 00 - - -Other - 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 3%

7319.90 -Other



Meas.MFNTariff



73 - 19


7319.90.10 00 - - -Sewing, darning or embroidery needles - 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 3%

7319.90.90 00 - - -Other - 7% CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

73.20 Springs and leaves for springs, of iron or steel.

7320.10.00 00 -Leaf-springs and leaves therefor KGM Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7320.20.00 -Helical springs Free AUT, NZT, CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -For furniture............................................................................................ KGM20 - - - - -For motor vehicles.................................................................................. KGM90 - - - - -Other ...................................................................................................... KGM


20 - - - - -Of wire.................................................................................................... KGM90 - - - - -Other ...................................................................................................... KGM

73.21 Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel.

-Cooking appliances and plate warmers:

7321.11 - -For gas fuel or for both gas and other fuels



Meas.MFNTariff




73 - 20

7321.11.10 00 - - -Non-portable stoves or ranges (including those specially designed for use on boats)

NMB 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7321.11.90 - - -Other 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

10 - - - - -Counter top units .................................................................................... NMB30 - - - - -Grills ....................................................................................................... NMB40 - - - - -Portable stoves or ranges....................................................................... NMB90 - - - - -Other ...................................................................................................... NMB

7321.12.00 00 - -For liquid fuel NMB 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7321.19 - -Other, including appliances for solid fuel

7321.19.10 00 - - -Non-portable stoves or ranges (including those specially designed for use on boats)

NMB 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7321.19.90 00 - - -Other NMB 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

-Other appliances:

7321.81.00 00 - -For gas fuel or for both gas and other fuels NMB 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%



Meas.MFNTariff



73 - 21


7321.82.00 00 - -For liquid fuel NMB 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7321.89.00 00 - -Other, including appliances for solid fuel NMB 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7321.90 -Parts

7321.90.10 - - -Cast iron grilles, of a weight not exceeding 3 kg, not further worked than as cast, cut and ground, for use in the manufacture of finished grilles for non-industrial non-portable stoves or ranges, for gas fuel or for both gas or other fuels;For appliances, excluding cooking appliances and plate warmers;For cooking appliances and plate warmers for gas fuel or for both gas and other fuels, excluding non-portable stoves or ranges (including those specially designed for use on boats)

Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -For appliances, excluding cooking appliances and plate warmers ........ - 90 - - - - -Other ...................................................................................................... -

- - -For non-portable stoves or ranges (including those specially designed for use on boats), for gas fuel or for both gas or other fuels:

7321.90.21 00 - - - -Cooking chambers - 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7321.90.22 00 - - - -Top surface panels - 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7321.90.23 00 - - - -Door assemblies, incorporating at least two of the following: inner panel, outer panel, window, insulation

- 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%



Meas.MFNTariff




73 - 22

7321.90.24 00 - - - -Oven pilot burners, top burners of other than cast iron, oven burners and lighter cones, for use in the manufacture of ranges

- Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7321.90.29 00 - - - -Other - 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7321.90.90 00 - - -Other - 8% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

73.22 Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel.

-Radiators and parts thereof:

7322.11.00 00 - -Of cast iron NMB 7% CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7322.19.00 00 - -Other NMB 7% CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7322.90 -Other

7322.90.10 - - -For heating buildings 7.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

- - - - -Warm air furnaces and parts thereof:21 - - - - - -Gas....................................................................................................... NMB29 - - - - - -Other .................................................................................................... NMB



Meas.MFNTariff



73 - 23


30 - - - - -Gas fired unit heaters, including parts.................................................... NMB90 - - - - -Other ...................................................................................................... NMB

7322.90.20 00 - - -Process air heaters;Switch heaters and sensing heads (hot air and oil fired), horizontal air curtains, for railway tracks

NMB 7.5% CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7322.90.90 00 - - -Other NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

73.23 Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel.

7323.10.00 00 -Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like

KGM 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 3%

-Other:

7323.91.00 00 - -Of cast iron, not enamelled - 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7323.92.00 00 - -Of cast iron, enamelled - 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7323.93.00 - -Of stainless steel 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

50 - - - - -Cooking utensils and kitchenware............................................................................................................... NMB

90 - - - - -Other ...................................................................................................... NMB



Meas.MFNTariff




73 - 24

7323.94.00 - -Of iron (other than cast iron) or steel, enamelled 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

10 - - - - -Cooking utensils ..................................................................................... NMB- - - - -Other:

91 - - - - - -Subject to customs duty based on excise duty .................................... NMB99 - - - - - -Other .................................................................................................... NMB

7323.99.00 00 - -Other - 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

73.24 Sanitary ware and parts thereof, of iron or steel.

7324.10.00 -Sinks and wash basins, of stainless steel 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

10 - - - - -Kitchen sinks .......................................................................................... NMB90 - - - - -Other ...................................................................................................... NMB

-Baths:

7324.21.00 00 - -Of cast iron, whether or not enamelled NMB 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7324.29 - -Other

7324.29.10 00 - - -Stampings and assemblies thereof, for use in the manufacture of bath tubs NMB Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free



Meas.MFNTariff



73 - 25


7324.29.90 00 - - -Other NMB 7% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7324.90.00 00 -Other, including parts - 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

73.25 Other cast articles of iron or steel.

7325.10.00 -Of non-malleable cast iron 6% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

10 - - - - -In the rough ............................................................................................ KGM90 - - - - -Other ...................................................................................................... KGM

-Other:

7325.91.00 - -Grinding balls and similar articles for mills Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

10 - - - - -Of cast iron............................................................................................. KGM90 - - - - -Other ...................................................................................................... KGM

7325.99 - -Other

7325.99.10 00 - - -The following, to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:


Flanged casing heads; Screwed casing heads for surface casings of an external diameter

exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas)

- - -Other:



Meas.MFNTariff




73 - 26

7325.99.91 00 - - - -In the rough KGM 6% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7325.99.99 00 - - - -Other KGM 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

73.26 Other articles of iron or steel.

-Forged or stamped, but not further worked:

7326.11.00 00 - -Grinding balls and similar articles for mills KGM Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7326.19 - -Other

7326.19.10 00 - - -Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools, rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas), to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells;Wick sustainers for use in the manufacture of candles


7326.19.90 00 - - -Other KGM 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7326.20.00 00 -Articles of iron or steel wire - 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 5%

7326.90 -Other



Meas.MFNTariff



73 - 27


7326.90.10 00 - - -Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles

- Free CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: Free

7326.90.90 - - -Other 6.5% CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT: FreeGPT: 3%

10 - - - - -Articles of tinplate................................................................................... - 20 - - - - -Ladders .................................................................................................. NMB30 - - - - -Hangers and similar supports, for tubes and pipes................................ KGM50 - - - - -Containers, of a kind normally carried on the person, in the pocket or in

the handbag ........................................................................................... NMB



Meas.MFNTariff




73 - 28

90 - - - - -Other ...................................................................................................... -



Meas.MFNTariff


customs tariff - schedule · customs tariff - schedule tariff item ss description of goods unit of...

Documents