customer training catalog training programs singleranservice.huaweils.com/file/01 wireless/2019...
TRANSCRIPT
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 1
Customer Training Catalog
Training Programs
SingleRAN
HUAWEI Learning Service
2019
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 2
CONTENTS
1 Training Solution ................................................................................................................................. 3
1.1 Overview ............................................................................................................................... 3
1.2 SingleRAN Training Solution ................................................................................................ 4
1.2.1 GSM/UMTS/LTE Back Office O&M Engineer Learning Solution .................................. 5
1.2.2 GSM/UMTS/LTE Field O&M Engineer Learning Solution ............................................ 5
1.3 SingleRAN Course Description ............................................................................................ 7
1.3.1 GSM/UMTS/LTE MBTS Hardware Introduction and Installation Training(MOOC) ...... 7
1.3.2 GSM/UMTS/LTE SingleRAN MBTS Integration and Maintenance Training ................ 8
1.3.3 GSM/UMTS SingleRAN BSC6900 Operation and Maintenance Training ................... 11
1.3.4 GSM/UMTS SingleRAN BSC6910 Operation and Maintenance Training .................. 13
1.3.5 GSM/UMTS SingleRAN BSC6900 Initial Configuration Training ............................... 15
1.3.6 GSM/UMTS SingleRAN BSC6910 Initial Configuration Training ............................... 17
1.3.7 GSM/UMTS SingleRAN Expansion and Reconfiguration Training(with BSC6900) ... 19
1.3.8 GSM/UMTS SingleRAN Expansion and Reconfiguration Training(with BSC6910) ... 23
1.3.9 GSM/UMTS Equipment Troubleshooting Skill Improvement Training ........................ 27
1.3.10 GSM/UMTS Voice and Data Service Troubleshooting Training ................................. 31
1.3.11 GSM/UMTS Emergency Maintenance Training .......................................................... 33
1.3.12 GSM/LTE MBTS Evolution Solution Training .............................................................. 35
1.3.13 UMTS/LTE MBTS Evolution Solution Training ............................................................ 37
1.3.14 GSM/UMTS/LTE MBTS Synchronization Solution Training ....................................... 39
1.3.15 UMTS/LTE Security Feature Basic Training ............................................................... 41
1.3.16 GSM/UMTS SingleRAN MBTS Field Operation and Maintenance Training .............. 42
1.3.17 GSM/UMTS/LTE SingleRAN MBTS Field Operation and Maintenance Training ....... 44
1.3.18 GSM/UMTS MBTS Field Site Troubleshooting Training ............................................. 46
1.3.19 GSM/UMTS/LTE MBTS Field Site Troubleshooting Training ..................................... 48
1.3.20 GSM/UMTS/LTE Auxiliary Cabinet Operation and Maintenance Training ................. 50
1.3.21 GSM/UMTS/LTE MBTS Field ALD Equipment Management Training ....................... 52
1.3.22 GSM/UMTS/LTE AAS Solution Training ..................................................................... 54
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 3
1 Training Solution
1.1 Overview
By the end of 2017, 708 operators in 186 countries are investing in LTE, 480 of them commercially
launched LTE or LTE-Advanced, also the GSA forecasts that by the end of 2016, 550 more LTE
networks will be commercially launched.
For the operators, how to achieve skill convergence and talent transformation on the base of 2G/3G
is a challenge, based on multiple learning method and phase based learning design; Huawei
Learning service will provide an efficient and effective solution.
SingleRAN Learning Solution
SRAN
Basics
Training
SRAN
Intermediate
Training
SRAN
Advanced
Training
SRAN
Advanced
Training
HOT
Topic
SRAN
Intermediate
Training
SRAN
Basics
Training
Back Office
Operation&MaintenanceFiled Operation&Maintenance
MOOC+Lecture+Hands-on(1W+8D)
GSM/UMTS MBTS Integration and
Maintenance Training
MOOC+Lectue+Hands-on (1W+4D)
GSM/UMTS MBSC Operation and
Maintenance Training
MOOC+Lectue+Hands-on (1W+5D)
GSM/UMTS MBSC Initial Configuration
Training
MOOC+Lectue+Hands-on (1W+3D)
GSM/UMTS MBTS Field Operation and
Maintenance Training
MOOC+Lectue+Hands-on (1W+3D)
GSM/UMTS/LTE MBTS Field Operation
and Maintenance Training
MOOC+Lectue+Hands-on (1W+2D)
GSM/UMTS/LTE MBTS Field Site
Troubleshooting Training
Lectue(2D)
GSM/UMTS/LTE Auxiliary Cabinet
O&M Training
MOOC+Lectue+Hands-on(1W+8D)
GSM/UMTS/LTE MBTS Integration and
Maintenance Training
MOOC+Lectue+Hands-on (1W+7D)
GSM/UMTS SRAN Expansion and
Reconfiguration Training
MOOC+Lectue+Hands-on (1W+7D)
GSM/UMTS Equipment Troubleshooting
Skill Improvement Training
ILT(5days)
GSM/UMTS Voice and Data Service
Troubleshooting Training
Lecture+Hands-on(2D)
GSM/UMTS Emergency
Maintenance Training
Lectue (2D)
GSM/UMTS/LTE MBTS
Synchronization Solution Training
MOOC+Lecture(1W+2D)
GSM/LTE MBTS Evolution Solution
Training
MOOC(1W)
GSM/UMTS/LTE MBTS Hardware Introduction and Installation Training
Lectue+Hands-on (3D)
GSM/UMTS/LTE MBTS Field ALD
Equipment Management Training
Lecture (2D)
GSM/UMTS/LTE AAS Solution Training
MOOC+Lectue+Hands-on(1W+2D)
GSM/UMTS MBTS Field Site
Troubleshooting Training
MOOC+Lectue(1W+2D)
UMTS/LTE MBTS Evolution Solution
Training
Lecture (1D)
UMTS/LTE Security Feature Basic
Training
The learning solution is “Job role Based”, according to your department structure, learning path for
different staffs will be customized.
Multiple learning method will be applied: E-learning, Lecture, Practice, e-Lab, simulation practice ,
workshop and seminar, we can expect the learning to be a efficient and effective one.
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 4
What’s MOOC:
MOOC means: massive open online courses, s an online course aimed at unlimited participation and open access via the web. In
addition to traditional course materials such as filmed lectures, readings, and problem sets, Huawei MOOCs provide interactive user
forums to support community interactions among students, professors, and teaching assistants . The LTE beginner can join the
MOOC course to learning the basic and background knowledge of LTE principles and device basic.
1.2 SingleRAN Training Solution
The standard SingleRAN learning solution is designed for the 2 job roles:
Training Programs
GSM/UMTS/LTE Back Office O&M Engineer Learning Solution(1.3.1)
GSM/UMTS/LTE Field O&M Engineer Learning Solution(1.3.2)
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 5
1.2.1 GSM/UMTS/LTE Back Office O&M Engineer Learning Solution
Learning
Phase Training Program Level
MOOC
(week)
Centralized
Training (Workda
ys)
S-OJT Class Size
(Person)
SRAN
Basics
Training
GSM/UMTS/LTE MBTS Hardware
Introduction and Installation Training Ⅰ 1 / / 6~12
GSM/UMTS/LTE MBTS Integration and
Maintenance Training Ⅱ 1 8 / 6~12
GSM/UMTS MBSC Operation and
Maintenance Training Ⅱ 1 4 / 6~12
GSM/UMTS MBSC Initial Configuration
Training Ⅱ 1 5 / 6~12
SRAN
Advanced
Training
GSM/UMTS SRAN Expansion and
Reconfiguration Training Ⅲ 1 7 / 6~12
GSM/UMTS Equipment Troubleshooting
Skill Improvement Training Ⅲ 1 7 / 6~12
GSM/UMTS Voice and Data Service
Troubleshooting Training Ⅲ / 5 / 6~12
GSM/UMTS Emergency Maintenance
Training Ⅲ / 2 / 6~12
HOT Topic
GSM/LTE MBTS Evolution Solution
Training Ⅲ 1 2 / 6~12
UMTS/LTE MBTS Evolution Solution
Training Ⅲ 1 2 / 6~12
GSM/UMTS/LTE MBTS Synchronization
Solution Training Ⅱ / 2 / 6~12
UMTS/LTE Security Feature Basic
Training Ⅱ / 1 / 6~12
GSM/UMTS/LTE AAS Solution Training Ⅱ / 2 / 6~12
Level Description:Ⅰ: Basic Course Ⅱ: Intermediate Course Ⅲ: Advanced Course Ⅳ: Expert
Course
1.2.2 GSM/UMTS/LTE Field O&M Engineer Learning Solution
Learning
Phase Training Program Level
MOOC
(week)
Centralized
Training (Workda
ys)
S-OJT
Class
Size
(Person)
SRAN Field
Basics
GSM/UMTS/LTE MBTS Hardware
Introduction and Installation Training Ⅰ 1 / / 6~12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 6
Training
GSM/UMTS MBTS Field Operation and
Maintenance Training Ⅱ 1 3 / 6~12
GSM/UMTS/LTE MBTS Field Operation
and Maintenance Training
(BTS3900/BTS5900)
Ⅱ 1 3 / 6~12
SRAN Field
Advanced
Training
GSM/UMTS MBTS Field Site
Troubleshooting Training Ⅲ 1 2 / 6~12
GSM/UMTS/LTE MBTS Field Site
Troubleshooting Training Ⅲ 1 2 / 6~12
GSM/UMTS/LTE Auxiliary Cabinet O&M
Training Ⅱ / 2 / 6~12
GSM/UMTS/LTE MBTS Field ALD
Equipment Management Training Ⅱ / 3 / 6~12
HOT Topic GSM/UMTS/LTE AAS Solution Training Ⅱ / 2 / 6~12
Level Description:Ⅰ: Basic Course Ⅱ: Intermediate Course Ⅲ: Advanced Course Ⅳ: Expert
Course
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 7
1.3 SingleRAN Course Description
1.3.1 GSM/UMTS/LTE MBTS Hardware Introduction and Installation
Training(MOOC)
Training Path
Target Audience
Field Operation and Maintenance Engineers and Routine Operation and Maintenance Engineers
Prerequisites
Basic knowledge of mobile communications
Objectives
On completion of this program, the participants will be able to:
Outline functions of MBTS hardware modules, detail procedure of installation
Perform main equipment cables connection independently
Training Content
GSM/UMTS/LTE MBTS Hardware Introduction and Installation (MOOC)
GSM/UMTS/LTE MBTS Hardware Introduction (MOOC)
MBTS System Overview (Video,15min)
MBTS Hardware Structure (Video,15min)
MOOC Test
GSM/UMTS/LTE MBTS Hardware Installation (MOOC)
MBTS BBU hardware installation (Video,13min)
MBTS RRU hardware installation (Video,7min)
MBTS Cable assembly installation (Video,30min)
MOOC Test
Duration
1 week (80mins, study 20mins per day)
GSM/UMTS/LTE MBTS Hardware Introduction and Installation Video
OST00 MOOC 1W
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 8
1.3.2 GSM/UMTS/LTE SingleRAN MBTS Integration and Maintenance Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Outline BTS3900 product functions and hardware structure, explain hardware typical
configuration and cables connection
Master the commissioning procedure of MBTS using U2000, complete the MBTS initial data
configuration and integration based on CME or MML tools
Conclude the operation of signaling trace, and perform monitor the performance of cell
Training Content
MBTS Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
MBTS Operation and Maintenance Tool Introduction and Application (MOOC)
OST00 MOOC 1W
MBTS GUL Product Description
OST02 1D Lecture
MBTS GUL Remote Commissioning
OST22 1D Lecture, Hands-on
MBTS GUL Initial Data Configuration
OST32 3.5D Lecture, Hands-on
MBTS GUL Routine Operation and Maintenance
OST12 2.5D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 9
Login MBTS by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MOOC Test
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
MBTS BTS3900/BTS5900 GUL Product Description
MBTS GUL Product Description
MBTS System Overview
MBTS Technical Specifications
MBTS Hardware Structure
MBTS Topology and Cable Connection
MBTS Typical Configuration
MBTS GUL Remote Commissioning
MBTS GUL Software Commissioning
Overview of MBTS Commissioning
Commissioning the MBTS based on U2000
Commissioning the MBTS based on U2000 + USB
MBTS GUL Software Commissioning Practice Guide
MBTS GUL Initial Data Configuration
MBTS GUL Initial Data Configuration based on CME
MBTS Data Configuration Introduction based on CME
Preparing MBTS Data based on CME
Creating MBTS Data based on CME
Exporting MBTS Data based on CME
Creating MBTS Data in Batches (Summary Data File)
MBTS GUL Initial Data Configuration based on MML(Optional)
Configure global data by MML
Configure equipment data by MML
Configure transmission data by MML
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 10
Configure radio data by MML
MBTS GUL Routine Operation and Maintenance
MBTS GUL Routine Operation and Maintenance
Alarm Management via U2000
MBTS Device maintenance
MBTS Transmission Layer Maintenance
MBTS Radio Layer maintenance
MBTS Tracing Management
MBTS Monitoring Management
MBTS System Management
Duration
8 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 11
1.3.3 GSM/UMTS SingleRAN BSC6900 Operation and Maintenance Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Detail the system structure and signal flows in BSC6900, isolate service trouble via interface
signaling trace
Inspect BSC running state, manage routine maintenance task, such as alarm operation
Backup and restore configuration of BSC, prepare for network equipment reconfiguration
Training Content
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBSC by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MOOC Test
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
OSS00 MOOC 1W
BSC6900 GU Product Description
OSS01 1D Lecture
BSC6900 GU Operation and Maintenance
OSS11 3D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 12
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
BSC6900 GU Product Description
BSC6900 GU Product Description
BSC6900 System Overview
BSC6900 Hardware Structure
Cabinets and Subracks
Subsystems and Boards
Cables
BSC6900 Signal Flows
BSC6900 UMTS Signal Flows
BSC6900 GSM Signal Flows
BSC6900 Typical Configuration
BSC6900 GU Operation and Maintenance
BSC6900 GU Operation and Maintenance
OM System Introduction
Alarm Monitoring
Device Maintenance
Transmission Detecting
Troubleshooting Assistant
Hardware Replacement
Data Backup and Restore
Other OM Functions
Duration
4 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 13
1.3.4 GSM/UMTS SingleRAN BSC6910 Operation and Maintenance Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Detail the system structure and signal flows in BSC6910, isolate service trouble via interface
signaling trace
Inspect BSC running state, manage routine maintenance task, such as alarm operation
Backup and restore configuration of BSC, prepare for network equipment reconfiguration
Training Content
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBSC by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MOOC Test
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
OSS00 MOOC 1W
BSC6910 GU Product Description
OSS02 1D Lecture
BSC6910 GU Operation and Maintenance
OSS12 3D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 14
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
BSC6910 GU Product Description
BSC6910 GU Product Description
BSC6910 System Overview
BSC6910 Hardware Structure
Cabinets and Subracks
Subsystems and Boards
Cables
BSC6910 Signal Flows
BSC6910 UMTS Signal Flows
BSC6910 GSM Signal Flows
BSC6910 Typical Configuration
BSC6910 GU Operation and Maintenance
BSC6910 GU Operation and Maintenance
OM System Introduction
Alarm Monitoring
Device Maintenance
Transmission Detecting
Troubleshooting Assistant
Hardware Replacement
Data Backup and Restore
Other OM Functions
Duration
4 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 15
1.3.5 GSM/UMTS SingleRAN BSC6900 Initial Configuration Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS SingleRAN BSC6900 Operation and Maintenance Training
Objectives
On completion of this program, the participants will be able to:
Complete BSC6900 commissioning and configuration independently via U2000 and MML tools
Outline MBSC data configuration procedure based on CME, export and activate the
configuration data, and observe configuration result and equipment running state
Training Content
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBSC by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
OSS00 MOOC 1W
BSC6900 GU Installation and Commissioning
OSS21 1D Lecture, Hands-on
BSC6900 GU Initial Data Configuration
OSS31 4D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 16
MOOC Test
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
BSC6900 GU Installation and Commissioning
BSC6900 GU Installation and Commissioning
BSC6900 O/M System Introduction
BSC6900 Software Installation
BSC6900 Commissioning
BSC6900 Commissioning Introduction
BSC6900 Commissioning Procedure
BSC6900 GU Initial Data Configuration
BSC6900 GU Initial Data Configuration Based on CME
Configuration Preparation based on CME
BSC6900 Data Configuration based on CME
BSC6900 Data Export based on CME
BSC6900 GU Initial Data Configuration Based on MML
Data Configuration Overview based on MML
BSC6900 Global Data Configuration based on MML
BSC6900 Equipment Data Configuration based on MML
BSC6900 Interface Data Configuration based on MML
BSC6900 Cell Data Configuration based on MML
Duration
5 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 17
1.3.6 GSM/UMTS SingleRAN BSC6910 Initial Configuration Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS SingleRAN11 BSC6910 Operation and Maintenance Training
Objectives
On completion of this program, the participants will be able to:
Complete BSC6910 commissioning and configuration independently via U2000 and MML tools
Outline MBSC data configuration procedure based on CME, export and activate the
configuration data, and observe configuration result and equipment running state
Training Content
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBSC by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
OSS00 MOOC 1W
BSC6910 GU Installation and Commissioning
OSS22 1D Lecture, Hands-on
BSC6910 GU Initial Data Configuration
OSS32 4D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 18
MOOC Test
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
BSC6910 GU Installation and Commissioning
BSC6910 GU Installation and Commissioning
BSC6910 O/M System Introduction
BSC6910 Software Installation
BSC6910 Commissioning
BSC6910 Commissioning Introduction
BSC6910 Commissioning Procedure
BSC6910 GU Initial Data Configuration
BSC6910 GU Initial Data Configuration Based on CME
Configuration Preparation based on CME
BSC6910 Data Configuration based on CME
BSC6910 Data Export based on CME
BSC6910 GU Initial Data Configuration Based on MML
Data Configuration Overview based on MML
BSC6910 Global Data Configuration based on MML
BSC6910 Equipment Data Configuration based on MML
BSC6910 Interface Data Configuration based on MML
BSC6910 Cell Data Configuration based on MML
Duration
5 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 19
1.3.7 GSM/UMTS SingleRAN Expansion and Reconfiguration Training(with
BSC6900)
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS SingleRAN MBTS Integration and Maintenance Training
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
OSS00 MOOC 1W
BSC6900 GU Dynamic Data Configuration
OSS33 1.5D Lecture, Hands-on
MBTS GU Dynamic Data Configuration
OST34 1.5D Lecture, Hands-on
BSC6900 GU Migration Data Configuration
OSS34 1D Lecture, Hands-on
MBTS GU Re-parent Data Configuration
OST33 1.5D Lecture, Hands-on
BSC6900 GU Capacity Expanding
OSS71 1D Lecture, Hands-on
MBTS GU Capacity Expanding
OST71 0.5D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 20
GSM/UMTS SingleRAN BSC6900 Operation and Maintenance Training
GSM/UMTS SingleRAN BSC6900 Initial Configuration Training
Objectives
On completion of this program, the participants will be able to:
Reconfiguring the Transmission Mode in transmission interface, adjust the parameters of cells
and neighboring cells in batches
Outline the procedure of the MBSC migration in CS and PS domain, and expand the capacity
of transmission interface and resource board, such as data and signal process board
Perform the MBTS re-parent and adjustment of base station resource independently via CME
tool
Training Content
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBSC by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MOOC Test
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
BSC6900 GU Dynamic Data Configuration
BSC6900 GU Dynamic Data Configuration based on CME
Modify global parameters of BSC/RNC
Adjust subracks and boards
Expand the transmission resource in interface
Reconfiguring the Transmission Mode
Adjust the cell processing in DPU board
MBTS GU Dynamic Data Configuration
MBTS GU Dynamic Data Configuration based on CME
Reconfiguring Cell Parameters
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 21
Figuring Neighboring Cells
Dynamic Data Adjustment Introduction
Adjusting the Global/Device/Transmission Parameters
Adjusting the Cells/TRXs/Channels Parameters
Adjusting the BTS Parameters
BSC6900 GU Migration Data Configuration
BSC6900 GU Migration Data Configuration based on CME
BSC/RNC Migration Summary
Re-parenting BSC/RNC Between MSC Servers
Re-parenting BSC/RNC Between SGSN
Changing the Connection Between the BSC and the MSC
Cutting Over an MSC (with IP Transmission Mode Retained over the A Interface)
Cutting Over an MSC (TDM to TDM Transmission Mode over the A Interface)
Cutting Over an MSC (TDM to IP Transmission Mode over the A Interface)
Describe RNC Migration Scenarios
Adjusting the Connection Between the RNC and MSC (ATM to IP over the Iu-CS
interface)
Adjusting the Connection Between the RNC and MSC Without Changing the ATM
Transmission Scheme on the Iu-CS Interface)
Adjusting the Connection Between the RNC and MSC (ATM to IP over the Iu-CS
Interface)
MBTS GU Re-parent Data Configuration
MBTS GU Re-parent Data Configuration based on CME
BTS Re-parenting Overview
Re-parenting BTSs within a BSC
Re-parenting BTSs between BSCs
NodeB Re-parenting Scenarios
Re-parenting NodeBs Under an RNC
Re-parenting NodeBs Between RNCs of the Same Version
BSC6900 GU Capacity Expanding
BSC6900 GU Capacity Expanding
Overview of Expanding the BSC Capacity
Adding BSC Board
Adding EPS Subrack
Overview of Expanding the RNC Capacity
Adding Board for BSC6900
Adding Interface Board
Adding Subrack
Interface Capacity Expansion
MBTS GU Capacity Expanding
MBTS GU Capacity Expanding
Overview of Expanding the MBTS Capacity
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 22
Adding Radio Cell
Adding Baseband Board
Adding RF/RRU Unit
Duration
7 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 23
1.3.8 GSM/UMTS SingleRAN Expansion and Reconfiguration Training(with
BSC6910)
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS SingleRAN MBTS Integration and Maintenance Training
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
OSS00 MOOC 1W
BSC6910 GU Dynamic Data Configuration
OSS33 1.5D Lecture, Hands-on
MBTS GU Dynamic Data Configuration
OST34 1.5D Lecture, Hands-on
BSC6910 GU Migration Data Configuration
OSS34 1D Lecture, Hands-one
MBTS GU Re-parent Data Configuration
OST33 1.5D Lecture, Hands-on
BSC6910 GU Capacity Expanding
OSS71 1D Lecture, Hands-on
MBTS GU Capacity Expanding
OST71 0.5D Lecture, Hands-one
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 24
GSM/UMTS SingleRAN BSC6910 Operation and Maintenance Training
GSM/UMTS SingleRAN BSC6910 Initial Configuration Training
Objectives
On completion of this program, the participants will be able to:
Reconfiguring the Transmission Mode in transmission interface, adjust the parameters of cells
and neighboring cells in batches
Outline the procedure of the MBSC migration in CS and PS domain, and expand the capacity
of transmission interface and resource board, such as data and signal process board
Perform the MBTS re-parent and adjustment of base station resource independently via CME
tool
Training Content
MBSC Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBSC by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MOOC Test
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
BSC6910 GU Dynamic Data Configuration
BSC6910 GU Dynamic Data Configuration based on CME
Modify global parameters of BSC/RNC
Adjust subracks and boards
Expand the transmission resource in interface
Reconfiguring the Transmission Mode
Adjust the cell processing in DPU board
MBTS GU Dynamic Data Configuration
MBTS GU Dynamic Data Configuration based on CME
Reconfiguring Cell Parameters
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 25
Figuring Neighboring Cells
Dynamic Data Adjustment Introduction
Adjusting the Global/Device/Transmission Parameters
Adjusting the Cells/TRXs/Channels Parameters
Adjusting the BTS Parameters
BSC6910 GU Migration Data Configuration
BSC6910 GU Migration Data Configuration based on CME
BSC/RNC Migration Summary
Re-parenting BSC/RNC Between MSC Servers
Re-parenting BSC/RNC Between SGSN
Changing the Connection Between the BSC and the MSC
Cutting Over an MSC (with IP Transmission Mode Retained over the A Interface)
Cutting Over an MSC (TDM to TDM Transmission Mode over the A Interface)
Cutting Over an MSC (TDM to IP Transmission Mode over the A Interface)
Describe RNC Migration Scenarios
Adjusting the Connection Between the RNC and MSC (ATM to IP over the Iu-CS
interface)
Adjusting the Connection Between the RNC and MSC Without Changing the ATM
Transmission Scheme on the Iu-CS Interface)
Adjusting the Connection Between the RNC and MSC (ATM to IP over the Iu-CS
Interface)
MBTS GU Re-parent Data Configuration
MBTS GU Re-parent Data Configuration based on CME
BTS Re-parenting Overview
Re-parenting BTSs within a BSC
Re-parenting BTSs between BSCs
NodeB Re-parenting Scenarios
Re-parenting NodeBs Under an RNC
Re-parenting NodeBs Between RNCs of the Same Version
BSC6910 GU Capacity Expanding
BSC6910 GU Capacity Expanding
Overview of Expanding the BSC Capacity
Adding BSC Board
Adding EPS Subrack
Overview of Expanding the RNC Capacity
Adding Board for BSC6910
Adding Interface Board
Adding Subrack
Interface Capacity Expansion
MBTS GU Capacity Expanding
MBTS GU Capacity Expanding
Overview of Expanding the MBTS Capacity
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 26
Adding Radio Cell
Adding Baseband Board
Adding RF/RRU Unit
Duration
7 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 27
1.3.9 GSM/UMTS Equipment Troubleshooting Skill Improvement Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS MBTS Integration and Maintenance Training
Wireless Network IP Fundamental Introduction (MOOC)
OSP00 MOOC 1W
GU SRAN Fault Information Collecting
OSC40 1D Lecture, Hands-on
MBSC GU Troubleshooting
OSC41 2D Lecture, Hands-on
UMTS BSC Troubleshooting Case Discussion Training
OSC41 0.5D Case Study
MBTS GU Troubleshooting
OSB40 2D Lecture, Hands-on
UMTS NodeB Troubleshooting Case Discussion Training
OSB40 0.5D Case Study
GU SRAN Top Alarm Handling
OSC43 1D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 28
GSM/UMTS MBSC Operation and Maintenance Training
GSM/UMTS MBSC Initial Configuration Training
Objectives
On completion of this program, the participants will be able to:
Collect the fault information for equipment faults independently
Comprehend the basic concepts of alarms, perform the methods of handling typical alarms via
U2000/LMT, compare methods of handling thoughts, conclude troubleshooting experience for
typical equipment trouble
Training Content
Wireless Network IP Fundamental Introduction (MOOC)
Wireless IP Basic Principle (MOOC)
OSI model and TCP/IP protocol structure(Video,10min)
IP address Introduction(Video,5min)
IP subnet division and Exchange Foundation(Video,15min)
MOOC Test
WCDMA IP Operation and Maintenance Tools (MOOC)
Overview of IP Troubleshooting (Video,5min)
Application of IP Tools (Video,10min)
Ping and Tracert (Video,15min)
MOOC Test
MOOC Duration
1 week (60mins, study 15mins per day)
GU SRAN Fault Information Collecting
WCDMA Fault Information Collecting
OMU Overview
Equipment information collecting
Accident information collecting
WRAN problems information collecting
RNC Fault information collecting
NodeB Fault information collecting
Equipment Problems
Upgrade Problems
Loading Problems
RTWP Problems
Clock Problems
Hardware and OM Problems
RF Problems
GSM Fault Information Collecting
OMU overview
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 29
BSC fault information collecting
Equipment problems information collecting
CS Fault information collecting
PS Fault information collecting
MBSC GU Troubleshooting
BSC6900/BSC6910 WCDMA Troubleshooting
OMU Service Abnormality
Equipment Troubleshooting
Service Setup Failure Troubleshooting
BSC6900/BSC6910 GSM Troubleshooting
OMU Service Abnormality
Equipment Troubleshooting
Service Setup Failure Troubleshooting
UMTS BSC Troubleshooting Case Discussion Training
UMTS BSC Troubleshooting Case Discussion
Hardware related Case
Transmission and Interface related Case
OMU and M2000 related Case
MBTS GU Troubleshooting
MBTS WCDMA Troubleshooting
RTWP Fault
CE Fault
Clock Reference Fault
CPRI Link Fault
RF Channel Failure
MBTS GSM Troubleshooting
Clock Reference Fault
CPRI Link Fault
RF Channel Failure
UMTS NodeB Troubleshooting Case Discussion
UMTS NodeB Troubleshooting Case Discussion
Hardware Case
Cell Case
RTWP Case
CE Faulty Case
OMCH Case
Clock Case
License Case
Transmission Case
GU SRAN Top Alarm Handling
WCDMA Top Alarm Handling
Basic Concept/Operation of Alarm
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 30
Procedure of Alarm Handling
UMTS Top Alarm Handling
GSM Top Alarm Handling
Basic Concept/Operation of Alarm
Procedure of Alarm Handling
GSM Top Alarm Handing
Duration
7 working days
Class Size
Min 6,max 12
Training Timetable (Optional)
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 31
1.3.10 GSM/UMTS Voice and Data Service Troubleshooting Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS MBTS Integration and Maintenance Training
GSM/UMTS MBSC Operation and Maintenance Training
GSM/UMTS MBSC Initial Configuration Training
Objectives
On completion of this program, the participants will be able to:
Discriminate normal signaling flow in typical service scenario, master how to analyze fault
using signaling flow
Analyze the possible causes for voice and data service faults from various perspectives, locate
and determine the exact causes
Provide probable location information about complicated service faults for technical support,
such as noise and echo trouble for voice service, data rate and access fault trouble for data
service
Training Content
GSM/UMTS Service Signaling Flow Analysis
WCDMA Signaling Flow Analysis
UTRAN Network Overview
Basic Concepts about UTRAN
GSM/UMTS Service Signaling Flow Analysis
OSC42 2D Lecture
GSM/UMTS Services Troubleshooting
OSC40 2D Lecture, Hands-on
WCDMA Service Troubleshooting Case Discussion
1D Case Study, Scenario-Based Practice
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 32
UTRAN Signaling Procedure
Cell Setup
CS Call Process
PS Call Process
GSM Signaling Flow Analysis
GBSS Network Overview
Basic Concepts about GBSS
GBSS Signaling Procedure
CS Call Process
PS Call Process
GSM/UMTS Services Troubleshooting
GSM and WCDMA CS Troubleshooting
CS Fault Troubleshooting flow
Single pass and no voice Troubleshooting
Cross pass Troubleshooting
Noise Troubleshooting
Echo Troubleshooting
GSM and WCDMA CS Troubleshooting
PS Fault Troubleshooting flow
PS Data rate Troubleshooting
PS Access Troubleshooting
WCDMA PS Troubleshooting
HSPA+ and HSPA Data Transmission
HSUPA Data Transmission Fault Analysis
HSDPA Data Transmission Fault
Cell Setup Failure
WCDMA Service Troubleshooting Case Discussion Training
WCDMA Service Troubleshooting Case Discussion
CS related Case
PS related Case
Scenario-Based Practice on eLab
Duration
5 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 33
1.3.11 GSM/UMTS Emergency Maintenance Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS MBTS Integration and Maintenance Training
GSM/UMTS MBSC Operation and Maintenance Training
GSM/UMTS MBSC Initial Configuration Training
Objectives
On completion of this program, the participants will be able to:
Execute the quick emergency handling methods, grasp some typical emergency faults
troubleshooting
Revise the scheme of heavy traffic precaution, and estimate execution risks, deal with typical
heavy traffic caused fault
Training Content
GU SRAN Emergency Maintenance
GBSS Emergency Maintenance
Emergency Maintenance Overview
Basic symptoms about the accident
Collect related information
Quick emergency handling methods
WCDMA Emergency Maintenance
Emergency maintenance overview
Brief guide to troubleshoot fault
Collecting fault information
Measures for accident recovery
GU SRAN Emergency Maintenance
OSC50 Lecture 1D
GU SRAN Heavy Traffic Precaution
OSC51 Lecture 1D
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 34
Typical emergency fault scenarios
Upgrade-related Faults
Operation-related Faults
Dysfunctional Iub Interface
Dysfunctional Iu Interface
Congestion on the Iu Signaling Plane
UE Access Restricted by the License
Low Success Rate of SCCP Connection Establishment
GU SRAN Heavy Traffic Precaution
GBSS Heavy Traffic Precaution
Precautions and Emergency Maintenance for Large Traffic Overview
Adjusting BSC Parameters Before Large Traffic
Emergency Maintenance for Large Traffic
WCDMA Heavy Traffic Precaution
The overview of the heavy traffic precaution
Pre-Festival network evaluation and expansion
Important KPIs
General overview and basic skills introduction
Backup and restore Configuration Data
View the CPU Usage of SPU and DPU
Preparation and suggestions on parameter adjustment before a heavy traffic
Preparation before heavy traffic
Parameter adjustment before heavy traffic
Emergency measures for heavy traffic fault
Final precaution
CPU overload on the SPU
Traffic volume over an SPU subsystem is 0
CPU overload on the MPU
CPU overload on the Interface board
Congestion on the Iu Signaling Plane
CN overload
Duration
2 working days
Class Size
Min 6,max 12
Training Timetable (Optional)
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 35
1.3.12 GSM/LTE MBTS Evolution Solution Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS/LTE MBTS Integration and Maintenance Training
Objectives
On completion of this program, the participants will be able to:
Outline the merits and demerits of mode transition schemes concerning transmission, co-MPT,
and CPRI for base station evolution, evaluate risks of schemes
Experiment to configure hardware and software script for Multiple base station from GBTS to
GL Multi-BTS
Training Content
MBTS Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBTS by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MOOC Test
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
MBTS Operation and Maintenance Tool Introduction and Application (MOOC)
OST00 MOOC 1W
GSM/LTE MBTS Evolution from GO to GL
OST74 2D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 36
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
GSM/LTE MBTS Evolution from GO to GL
GSM/LTE MBTS Evolution Overview
Transition Paths
Transition Process
Network Impacts
Restrictions
GSM/LTE MBTS Reconstruction from GO to GL
Co-MPT Reconstruction
Overview of Co-MPT Reconstruction
GO Co-MPT Reconstruction
Co-MPT Reconstruction from G+L to GL
Multi-site Combination Through Co-MPT Reconstruction
Co-MPT Reconstruction Process
Typical Examples About Configuration Data Conversion and PNP Operations
Duration
2 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 37
1.3.13 UMTS/LTE MBTS Evolution Solution Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS/LTE MBTS Integration and Maintenance Training
Objectives
On completion of this program, the participants will be able to:
Outline the merits and demerits of mode transition schemes concerning transmission, co-MPT,
and CPRI for base station evolution, evaluate risks of schemes
Experiment to configure hardware and software script for Multiple base station from NodeB to
UL Multi-BTS
Training Content
MBTS Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBTS by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
CME Introduction and Application
Outline workflow of the CME (Video,15min)
Describe the application of CME’s features during initial configuration and
reconfiguration scenario (Video,10min)
MOOC Test
U2000 Client Introduction and Application
U2000 client overview (Video,5min)
MBTS Operation and Maintenance Tool Introduction and Application (MOOC)
OST00 MOOC 1W
UMTS/LTE MBTS Evolution from UO to UL
OST70 2D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 38
Application of U2000 client for SRAN data configuration (Video,10min)
Application of U2000 client for SRAN O&M (Video,15min)
MOOC Test
MOOC Duration
1 week (80mins, study 20mins per day)
UMTS/LTE MBTS Evolution from UO to UL
UMTS/LTE MBTS Evolution Overview
Transition Paths
Transition Process
Network Impacts
Restrictions
UMTS/LTE MBTS Reconstruction from UO to UL
Co-MPT Reconstruction
Overview of Co-MPT Reconstruction
Co-MPT Reconstruction from UO to UL
Multi-site Combination Through Co-MPT Reconstruction
Co-MPT Reconstruction Process
Typical Examples About Configuration Data Conversion and PNP Operations
Duration
2 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 39
1.3.14 GSM/UMTS/LTE MBTS Synchronization Solution Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Grasp the IPCLK equipment specification and selection, detail the hardware and software
architecture, perform the IPCLK equipment cable connection and deployment data
configuration
Detail the future evolution strategy of IPCLK synchronization scheme to meet the all-IP network
scene and time synchronization requirement
Training Content
Synchronization Feature and Solution on Wireless Network
Synchronization Feature and Solution Description
Overview
Synchronization Sources
GPS/RGPS
IEEE1588 V2
Clock over IP
Synchronous Ethernet
1PPS+TOD
BITS
E1/T1
Configuration
Troubleshooting
IPCLK3000/IPCLK1000 Product Description and Operation Maintenance
IPCLK3000/IPCLK1000 Product description
Synchronization Feature and Solution on Wireless Network
OSP64 1D Lecture
IPCLK3000/IPCLK1000 Product Description and Operation Maintenance
OSP64 1D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 40
IPCLK System Overview
IPCLK Hardware Introduction
IPCLK Software Introduction
IPCLK3000/IPCLK1000 Operation and Maintenance
IPCLK OM Network
Commissioning Overview
IPCLK Initial Data Configuration
IPCLK CPU Usage Monitoring and Trace
IPCLK Routine Maintenance
Duration
2 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 41
1.3.15 UMTS/LTE Security Feature Basic Training
Training Path
Target Audience
Routine Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Detail the network infrastructure security solution, review security implementation scheme and
provide technical guide and suggestion
Training Content
SRAN Security Solution Introduction
SRAN Security Solution Introduction
SRAN security solution overview
Air interface security solution
Equipment security solution
Network infrastructure security solution
Duration
1 working day
Class Size
Min 6, Max 12
SRAN Security Solution Introduction
OSP67 1D Lecture
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 42
1.3.16 GSM/UMTS SingleRAN MBTS Field Operation and Maintenance Training
Training Path
Target Audience
Field Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Outline functions of MBTS hardware modules, detail procedure of installation
Perform main equipment cards installation and cables connection, judge health of equipment
via LED running state
Training Content
GSM/UMTS MBTS Hardware Introduction and Installation (MOOC)
GSM/UMTS MBTS Hardware Introduction (MOOC)
MBTS System Overview (Video,15min)
MBTS Hardware Structure (Video,15min)
MOOC Test ()
GSM/UMTS MBTS Hardware Installation (MOOC)
MBTS BBU hardware installation (Video,13min)
GSM/UMTS MBTS Hardware Introduction and Installation Video
OST00 MOOC 1W
MBTS GU Product Description
OST01 1D Lecture
MBTS GU Field Installation and Commissioning
OST24 1D Lecture, Hands-on
MBTS GU Field Operation and Maintenance
OST13 1D Lecture, Hands-one
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 43
MBTS RRU hardware installation (Video,7min)
MBTS Cable assembly installation (Video,30min)
MOOC Test ()
Duration
1 week (80mins, study 20mins per day)
MBTS GU Product Description
MBTS GU Product Description
MBTS System Overview
MBTS Technical Specifications
MBTS Hardware Structure
MBTS Topology and Cable Connection
MBTS Typical Configuration
MBTS GU Field Installation and Commissioning
MBTS Hardware Installation
List the procedures of installing the MBTS cabinet
Describe how to install the MBTS cables
Understand MBTS cabinet structure
MBTS GU Local Commissioning
Commissioning Introduction
Local Commissioning through the USB Disk
Procedure
Preparation
Commissioning
Local Commissioning through the WEB LMT
MBTS GU Field Operation and Maintenance
MBTS GU Field Operation and Maintenance
Checking Hardware
Replacing Cards
Routine Maintenance List
Duration
3 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 44
1.3.17 GSM/UMTS/LTE SingleRAN MBTS Field Operation and Maintenance Training
Training Path
Target Audience
Field Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Outline functions of MBTS hardware modules, detail procedure of installation
Perform main equipment cards installation and cables connection, judge health of equipment
via LED running state
Training Content
GSM/UMTS/LTE MBTS Hardware Introduction and Installation (MOOC)
GSM/UMTS/LTE MBTS Hardware Introduction (MOOC)
MBTS System Overview (Video,15min)
MBTS Hardware Structure (Video,15min)
MOOC Test ()
GSM/UMTS/LTE MBTS Hardware Installation (MOOC)
MBTS BBU hardware installation (Video,13min)
GSM/UMTS/LTE MBTS Hardware Introduction and Installation Video
OST00 MOOC 1W
MBTS GUL Product Description
OST02 1D Lecture
MBTS GUL Field Installation and Commissioning
OST23 1D Lecture, Hands-on
MBTS GUL Field Operation and Maintenance
OST14 1D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 45
MBTS RRU hardware installation (Video,7min)
MBTS Cable assembly installation (Video,30min)
MOOC Test ()
Duration
1 week (80mins, study 20mins per day)
MBTS GUL Product Description
MBTS GUL Product Description
MBTS System Overview
MBTS Technical Specifications
MBTS Hardware Structure
MBTS Topology and Cable Connection
MBTS Typical Configuration
MBTS GUL Field Installation and Commissioning
MBTS Hardware Installation
List the procedures of installing the MBTS cabinet
Describe how to install the MBTS cables
Understand MBTS cabinet structure
MBTS GUL Local Commissioning
Commissioning Introduction
Local Commissioning through the USB Disk
Procedure
Preparation
Commissioning
Local Commissioning through the WEB LMT
MBTS GUL Field Operation and Maintenance
MBTS GUL Field Operation and Maintenance
Checking Hardware
Replacing Boards
Routine Maintenance List
Duration
3 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 46
1.3.18 GSM/UMTS MBTS Field Site Troubleshooting Training
Training Path
Target Audience
Field Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS MBTS Field Operation and Maintenance Training
Objectives
On completion of this program, the participants will be able to:
Perform main equipment cards installation and cables connection, judge health of equipment
via LED running state
Handle with the main faults of equipment level independently, draw antenna system fault
diagnosis process
Execute MML command to query equipment running state and run command to complete
VSWR test for RF unit
Training Content
MBTS Field Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBTS by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
MBTS Field Operation and Maintenance Tool Introduction and Application (MOOC)
OST00 MOOC 1W
MBTS GU Inspection
OST41 Lecture, Hands-on 1D
MBTS Antenna/Feeder/CPRI Interface Troubleshooting
OST42 Lecture, Hands-on 1D
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 47
MOOC Duration
1 week (25mins, study 5mins per day)
MBTS GU Inspection
MBTS GU Inspection
Equipment status inspection
Network performance inspection
Device work-load assessment
Special scenario inspection
MBTS Antenna/Feeder/CPRI Interface Troubleshooting
MBTS Antenna/Feeder/CPRI Interface Troubleshooting
Faults related to antenna & feeder system
PIM principle and fault analysis
VSWR principle and fault analysis
TMA working principle and power supply
Location by section method in PIM and VSWR troubleshooting
Troubleshooting with help of LMT
Duration
2 working days
Class Size
Min 6,max 12
Training Timetable (Optional)
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 48
1.3.19 GSM/UMTS/LTE MBTS Field Site Troubleshooting Training
Training Path
Target Audience
Field Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS/LTE MBTS Field Operation and Maintenance Training
Objectives
On completion of this program, the participants will be able to:
Perform main equipment cards installation and cables connection, judge health of equipment
via LED running state
Handle with the main faults of equipment level independently, draw antenna system fault
diagnosis process
Execute MML command to query equipment running state and run command to complete
VSWR test for RF unit
Training Content
MBTS Field Operation and Maintenance Tool Introduction and Application (MOOC)
WEBLMT Introduction and Application(MOOC)
Login MBTS by WEBLMT (Video,5min)
Execute MML command by WEBLMT (Video,5min)
Check the health of MBTS by WEBLMT (Video,15min)
MOOC Test
MBTS Field Operation and Maintenance Tool Introduction and Application (MOOC)
OST00 MOOC 1W
MBTS GUL Inspection
OST41 1D Lecture, Hands-on
MBTS Antenna/Feeder/CPRI Interface Troubleshooting
OST42 1D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 49
MOOC Duration
1 week (25mins, study 5mins per day)
MBTS GUL Inspection
MBTS GUL Inspection
Equipment status inspection
Network performance inspection
Device work-load assessment
Special scenario inspection
MBTS Antenna/Feeder/CPRI Interface Troubleshooting
MBTS Antenna/Feeder/CPRI Interface Troubleshooting
Faults related to antenna
feeder system
PIM principle and fault analysis
VSWR principle and fault analysis
TMA working principle and power supply
Location by section method in PIM and VSWR troubleshooting
Troubleshooting with help of LMT
Duration
2 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 50
1.3.20 GSM/UMTS/LTE Auxiliary Cabinet Operation and Maintenance Training
Training Path
Target Audience
Field Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Familiar with the checklist of APM30H Hardware Installation, recognize the different cabinets
installation requirements and cables installations procedure
Replace the APM30H, TMC11H, IBBS200D/200T, RFC, OMB cabinets components, and
complete monitoring system configuration
Training Content
APM30H IBBS TMC RFC OMB Hardware Description
APM30H IBBS TMC RFC OMB Hardware Description
Cabinet Functions
Cabinet Description
APM30H
TMC11H
IBBS
RFC
APM30H IBBS TMC RFC OMB Hardware Description
OST80 Lecture 0.5D
APM30H IBBS TMC RFC OMB Hardware Installation
OST81 Lecture 0.5D
APM30H IBBS TMC RFC OMB Hardware Maintenance
OST82 Lecture, Hands-on 0.5D
APM30H IBBS TMC RFC OMB GUL Monitoring
OST83 Lecture, Hands-on 0.5D
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 51
OMB
Component Description
APM30H IBBS TMC RFC OMB Hardware Installation
APM30H IBBS TMC RFC OMB Hardware Installation
Hardware Installation Overview
Cabinets Installation
Installing APM30H TMC11H RFC IBBS Cabinet
Installing OMB Cabinet
Cables Installation (APM IBBS TMC RFC)
Cables Installation (OMB)
Checklist for Hardware Installation
APM30H IBBS TMC RFC OMB Hardware Maintenance
APM30H IBBS TMC RFC OMB Hardware Maintenance
Vendor Safety Information
Overview
Electricity Safety
Working at height
Mechanical Safety
Routine Maintenance
Components Normal Power Supply Status
Replacing Components in an APM30H or TMC11H
Querying Electronic Cabinet Label
Replacing Components in an IBBS200T or IBBS200D
Replacing Components in an RFC
Replacing Components in an OMB
APM30H IBBS TMC RFC OMB GUL Monitoring
APM30H IBBS TMC RFC OMB GUL Monitoring
Monitoring System Overview
Monitoring Data Configuration
Data Configuration Principle
Monitoring signal Data Configuration (UMTS<E)
Monitoring signal Data Configuration (GSM)
Example of Monitoring Configurations
Duration
2 working days
Class Size
Min 6,max 12
Training Timetable (Optional)
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 52
1.3.21 GSM/UMTS/LTE MBTS Field ALD Equipment Management Training
Training Path
Target Audience
Field Operation and Maintenance Technicians and Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Successful completion of the following program(s):
GSM/UMTS/LTE MBTS Field Operation and Maintenance Training
Objectives
On completion of this program, the participants will be able to:
Grasp how to install, configure, and commission the ALD module, and verify the ALD-related
features deployment
Revise scheme of RF redundancy and CPRI sharing and CPRI MUX feature application
Complete PIM interference troubleshooting with understanding of PIM principle, and apply
location by section method in PIM and VSWR troubleshooting with help of LMT
Training Content
Antenna Feeder and RF Product Basic Knowledge
Antenna Feeder and RF Product Basic Knowledge
Antenna & Feeder System Components Overview
Antenna Basic Knowledge
Feeder and Jumper
ALD Installation and Commissioning
Installation and Commissioning of RET Antenna and TMA(GSM)
Installation and Commissioning of Electrical Tilt Antenna
Antenna Feeder and RF Product Basic Knowledge
OMB10 1D Lecture
ALD Installation and Commissioning
OMB10 1D Lecture, Hands-on
MBTS ALD Troubleshooting
OMB10 1D Lecture, Hands-on
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 53
Installation and Commissioning of TMA
Installation and Commissioning of RET Antenna and TMA(UMTS)
Installation and Commissioning of Electrical Tilt Antenna
Installation and Commissioning of TMA
Installation and Commissioning of RET Antenna and TMA(LTE)
Installation and Commissioning of Electrical Tilt Antenna
Installation and Commissioning of TMA
MBTS ALD Troubleshooting
SiteMaster Operation Introduction
Measuring VSWR
Locating Antenna-Feeder Fault
Antenna and Transmission Feed-Line Analysis
RET Antenna Alarm Trouble Shooting
Analysis and Solution
Suggestion for Installation and Maintenance
Case Analysis
Duration
3 working days
Class Size
Min 6, Max 12
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 54
1.3.22 GSM/UMTS/LTE AAS Solution Training
Training Path
Target Audience
Field Operation and Maintenance Engineers and Routine Operation and Maintenance Engineers
Prerequisites
Basic knowledge of mobile communications
At least 1 year relevant working experience in wireless network with operation and
maintenance
Objectives
On completion of this program, the participants will be able to:
Forecast the trends of Macro Base Station site, grasp AAS to redefine site architecture, and
understand how to install, configure and maintain AAS equipment
Training Content
AAS Solution Overview
AAS System Overview
Evolution of Base Station
Active Antenna System Overview
AAS Status and Trends in the Industry
AAS Solution Description
Typical Application Scenarios
Easy Macro Hardware
Site Design
Site Configurations
CPRI Principles
AAS Product Description
AAU Product Description
Functions and Features of the AAU
Hardware Architecture of the AAU
Typical Configurations and Upgrade of the AAU
Installation and Maintenance of the AAU
AAS Solutions Overview
OST81 1D Lecture
AAS Product Description
OST81 1D Lecture
SingleRAN Product Technical Training Proposal
COMMERCIAL IN CONFIDENCE 55
Product Configuration Specifications of the AAU
Mapping Strategies for the AAU
Duration
2 working days
Class Size
Min 6, Max 12