cs unitec hacksaws catalog pages
DESCRIPTION
CS Unitec offers Pneumatic, Electric and Hydraulic models and a wide range of options for portable cutting of pipe, structural steel, tanks and other materials.TRANSCRIPT
PORT
ABL
E H
AC
KSA
WS
14 • 1-800-700-5919 • Visit our Web site at www.csunitec.com
Portable Hacksaws for Tough DutyPortable Hacksaws for Tough DutyOn-site cutting of pipe up to 24" OD and structural steel
Pneumatic • Electric • Hydraulic
CS Unitec's power hacksaws offer a wide rangeof options for portable cutting of pipe, structuralsteel, tanks and other materials. Our saws aredesigned for the toughest service in refineries,power plants, utilities, offshore oil, constructionand demolition applications and are ideal forshutdowns and turnarounds in process pipingindustries. CS Unitec's pneumatic saws aresafer than cutting with a welding torch inhazardous areas or confined spaces.
• Compact size, ideal for cutting in confined spaces• 2 3/8" blade stroke• Pipe clamps for 90˚ cutting of up to 24" OD pipe• Profile clamps for structural steel• Wide variety of blades and accessories for
cutting steel, stainless steel, aluminum, plastic,wood and ductile iron
• Optional blade guide to ensure right-angle cuts• Automatically cut pipe with our optional self-
feeding, pneumatic-powered pipe clamp system
Heavy-duty sawblades from 8" to37" long
HSS, HSS-SL,carbide-coatedand Diamond-coated bladesavailable(see page 19)
Pneumatic, electricor hydraulic motor
Twist or lever throttle
Optional saw blade guidefor added blade stability –ensures straight cutting!
Two sizes available (Not required – see page 18)
Assorted pipe clamps forpipes up to 24" OD or profileclamps for structural steel(see page 17)
Manual or automatic feed
Pneumatic: 3/4" NPT ConnectionElectric: 110 Volt (220V available)Hydraulic: 1/2" FF (HTMA) Couplings
PORT
ABL
E H
AC
KSAW
S
15• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Portable Pneumatic Power HacksawsPortable Pneumatic Power HacksawsPneumatic power for hazardous environments
• HSS (High-speed Steel), HSS-SL (forstainless steel and hard metal), CarbideCoated and Diamond Coated
Accessory Saw Blades(see page 19)
Pneumatic - 3/4" ID NPT Air Connection
5 1212 0010
5 1212 00501.5 HP
1.5 HP
Power
Roll
Lever
Air Consumption: 51 CFM
Air Pressure: 90 PSI
Throttle Motor Specifications
23/8"
2 3/8"
BladeStroke
15.4
15.4
Weight(lbs.)
100-350
100-350
Strokesper Min.
1/2" ID1/2" ID
HoseModelNo.
• Pneumatic motor with variable speeds
• Ideal for cutting pipe, tanks, structuralsteel, profiles and other materials
• Designed for the toughest service inrefineries, chemical plants, utilities,pipelines,construction,offshore oil anddemolitionapplications
• Cut pipe up to 24"OD in one pass
• Chain clamps and profile clampsavailable for accurate 90˚ cutting ofpipe and structural steel
• 2 3/8" stroke for heavy-duty cutting
• Ideal for cutting in confined spaces
• Accommodate heavy-duty blades upto 37" long
• Optional saw blade guides to increaseblade stability (see page 18)
• Pneumatic pipe clamp systemavailable for automatically cuttingpipe; easily attaches to pneumatichacksaw and shares same air supply(see accessory No. 5 1208 9980 onpage 18)
Throttle Types for Pneumatic Saws:Roll Throttle(air model 5 1212 0010 only) –used only with automatic feedpipe clamp (see page 18)
Lever Throttle(model 5 1212 0050) – provideson/off paddle switch for manualcutting with clamp
Pipe Capacity24" OD
Profile Capacity21 3/4" h x 11 1/2" w
Clamps for Pipes and Profiles – manual andautomatic-feed clamps for straight, 90˚ cuttingof pipes and profiles (see pages 17-18)
ClampsManual Automatic
Model 5 1212 0050 with lever throttlePneumatic
3/4" NPT Air Connection
ATEX CertifiedATEX Certified
ATEX Certified for Ex Zone EX II 2 GcT5
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
PORT
ABL
E H
AC
KSA
WS
16
Portable Power HacksawsPortable Power HacksawsElectric and hydraulic power
Model 5 1215 0070with variable speedElectric
Model 5 1220 0050with lever throttleHydraulic
11 Amps / 110 Volt (220 Volt Available)
1/2" FF Couplings
• HSS (High-speed Steel), HSS-SL(for stainless steel and hard metal),Carbide Coated and Diamond Coated
AccessorySaw Blades(see page 19)
Electric - 11 Amps / 110 Volt**
5 1215 0070*
Hydraulic - 1/2" FF (HTMA) Couplings
5 1220 0050
* Model 5 1215 0070 has an electronic speed control dial. **Also available as 220 Volt/50 Hz
1.5 HP
3.8 HP
Power
Trigger
Lever
110V/60 Hz (220V/50Hz is available)
Oil Flow: 4 GPM at 2000 PSI
Throttle Motor Specifications
23/8"
2 3/8"
BladeStroke
13
13.5
Weight(lbs.)
200-400
100-500
Strokesper Min.
Cable
1/2" ID
HoseModelNo.
• Electric or hydraulic motor with variable speeds
• Ideal for cutting pipe, tanks, structural steel,profiles and other materials
• Designed for the toughestservice in refineries, chemicalplants, utilities, pipelines,construction, offshore oil anddemolition applications
• Cut pipe up to 24" OD in onepass
• Chain clamps and profile clamps available foraccurate 90˚ cutting of pipe and structural steel
• 2 3/8" stroke for heavy-duty cutting
• Ideal for cutting in confined spaces
• Accommodate heavy-duty blades up to 37" long
• Optional saw blade guides to increaseblade stability (see page 18)
• Automatic-feed pipe clamp system availablefor automatically cutting pipe – saves operatortime and makes work easier(see accessory No. 5 1208 9990 on page 18)
Pipe Capacity24" OD
Profile Capacity21 3/4" h x 11 1/2" w
Clamps for Pipes and Profiles – manual andautomatic-feed clamps for straight, 90˚ cuttingof pipes and profiles (see pages 17-18)
ClampsManual Automatic
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
HA
CKS
AW
AC
CES
SORI
ES
17
Hacksaw AccessoriesHacksaw Accessories
Model No. CP1 – Universal Clamp
• Self-aligning feet adjust to the form of theworkpiece (round, square and angled)
• Accommodates 1/2" to 123/4" OD [up to 24" ODwith extension chain no. CP1/10 (393/8" long)]
• CP1 easily attaches to most of ourreciprocating saws for 90˚ cuts in tight spaces
Extension Chains for Pipe ClampsExtension Chains for Pipe Clamps• Extend capacity of pipe clamps up to 24" ODModel No. 5 1201 9010 – 17 3/4" chain extensionModel No. 5 1201 9030 – 39 3/8" chain extension(allows pipe clamp Nos. 5 1202 9960 and 5 1208 9940 to fit 24" OD pipe)
Model No. 5 1207 99102" to 6" OD pipe clamp
Model No. 5 1202 9950 4" to 12 3/4" OD pipe clamp –lever lock provides no-tools tightening of chain (up to24" OD with extension chain shown below)
Model No. 5 1202 99604" to 12 3/4" OD pipe clamp –manual tightening of chain (up to 24" OD with extension chain shown below)
Lever Lock AssemblyPart No. 5 1202 9970Can be used to retrofitmanual clamp 5 1202 9960 for no-tools tightening ofchain. Also fits similar clamps.
Clamps for Pipes and ProfilesClamps for Pipes and ProfilesEnsure 90˚ cuts through pipe and profiles
Clamps for Pipes and ProfilesClamps for Pipes and Profiles
Large Pipe Clamp,Model 5 1202 9960
Profile Clamp,Model 5 1207 8970
Small Pipe Clamp,Model 5 1207 9910
Up to 6"pipe dia.
Heavy-duty cutting of pipe and structural steel
Model No. 5 1207 897021 5/8" x 11 3/8" profileclamp
Large Pipe Clamp with leverlock for no-tools tightening, Model 5 1202 9950 (below)
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
HA
CKS
AW
AC
CES
SORI
ES
18
Hacksaw AccessoriesHacksaw AccessoriesAutomatic feed pipe clamps save time and effort
Model No. 5 1208 9980 – Automatic Clamp
• Save time and effort by automatically cuttingpipe up to 12 3/4" OD (up to 24" OD withextension chain – see page 17)
• Self-feeding device savesoperator time, increasessafety and makes work easier
• Easily attaches to CS Unitec air hacksawand shares same 90 PSI air supply (Pipeclamp for use only with CS Unitec airhacksaw Model No. 5 1212 0010)
• Blade guide for straight cutting throughpipe and difficult materials is optional (see below)
Model No. 5 1208 9990 – Automatic Clamp
• Save time and effort by automatically cutting pipe up to123/4" OD (up to 24" OD withextension chain – see page 17)
• Self-contained gas cylinderprovides constant feed pressure tosaw blade
• Saves operator time, increasessafety and makes work easier
• Easily attaches to CS Unitecelectric hacksaw 5 1215 0070 orhydraulic hacksaw 5 1220 0050
• Optional blade guide for straightcutting through pipe and difficultmaterials (see below)
Self-feeding Pipe Clamp for Pneumatic SawsSelf-feeding Pipe Clamp for Pneumatic Saws
Self-feeding Pipe Clamp for Electric and Hydraulic SawsSelf-feeding Pipe Clamp for Electric and Hydraulic Saws
Blade GuidesBlade Guides
• Ensure straight cutting through pipe and difficult materialsModel No. 5 1207 9970 for pipes up to 13" (20" min. blade length required)
Model No. 5 1207 8910 for pipes up to 21" (30" min. blade length required)
Optional guides with two roller bearings
Air-PoweredClamp
Self-FeedingMechanicalClamp
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
HA
CKS
AW
BLA
DES
19
Hacksaw BladesHacksaw Blades - 8" up to 37" long
Z22-9 HSSZ22-10 HSSZ22-11 HSS
Z22-6 HSSZ22-6 HSS-SL*Z22-6 CarbideZ22-31 HSSZ22-71 HSS
Z22-83 TDS
Z22-7 HSSZ22-7 CarbideZ22-29 HSSZ22-32 HSSZ22-33 HSS
Z22-86 TDS
Z22-72 HSSZ22-72 Carbide
Z22-30 HSSZ22-30 HSS-SL*Z22-40 HSS
Z22-73 HSSZ22-73 CarbideZ22-74 HSS
Z22-75 HSSZ22-75 HSS-SL*Z22-76 HSS
Z22-37 HSS
Heavy-duty cutting of pipe and structural steel
*Use HSS-SL Blades for best cuttingperformance on stainless steel and hard metal.
HSS or HSS-SL Saw Blade Shown
Order No. Steel andNonferrous Metal
Plasticand Wood
Ductile/Cast Ironand Masonry
Max. Dia.of Cut
DimensionsLength Teeth/Inch Thickness
8"8"8"
12"12"12"12"12"
12"
16"16"16"16"16"
19"
20"20"
21"21"21"
24"24"24"
30"30"30"
37"
81624
1616
Coated124
Coated
1616846
Coated
14Coated
12124
14Coated8
12126
12
Steel/AluminumSteel
Sheet Metal
SteelStainless Steel
–Steel–
–
Steel–
Steel/Aluminum–
Cast Iron
–
Steel–
SteelStainless Steel
–
Steel–
Steel/Aluminum
SteelStainless SteelPlastics/Wood
Steel
Plastics––
––––
Plastics/Wood
–
––
PlasticsPlastics/WoodPlastics
–
––
––
Plastics/Wood
––
Plastic
––
–
–
–––
––
Masonry––
Ductile Iron
–Masonry
––
Cast Iron
Ductile Iron
–Masonry
–––
–Masonry
–
––
–
–
1/16" 1/16"1/16"1/16"1/16"3/16"1/16"1/16"3/32"1/16"1/16"1/16"1/16"1/16"7/64"5/64"3/16"1/16"1/16"1/16"5/64"3/16"5/64"5/64"5/64"5/64"5/64"
31/8" 31/8" 31/8"
65/8" 65/8"65/8"65/8"65/8"
65/8"
105/8"105/8"105/8"105/8"105/8"
13"
145/8"145/8"
155/8"155/8"155/8"
181/2"181/2"181/2"
247/8"247/8"247/8"
317/8"
Use ProLube™ Specialty Lubricants with Hacksaw Blades to help tools work cooler, longer and more efficiently. ProLube Lubricants are non-toxic and ideal for stainless steel and hard metal cutting applications. See page 34.
Extra thick for 90˚ cutting