cs unitec portable magnetic drilling machine
DESCRIPTION
A complete overview of CS Unitec's Portable Magnetic Drilling Machines.TRANSCRIPT
PORT
ABL
E M
AG
NET
IC D
RILL
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com2
Fast, accurate hole cutting…on the job site or in the shop!Designed for continuous operation, CS Unitec's portable magnetic drills are ideal for drilling structural steeland virtually any metal. We offer the most compact, powerful and reliable series of portable magnetic drillsfor holes up to 5-1/8" diameter. All CS Unitec drills are heavy-duty for use in construction and industry. Ourcomplete line includes electric, pneumatic and hydraulic tools. They are available for prompt delivery.
COOLMAG ™ Electromagnets
ensure that the magnet does not overheat. When themagnet is switched on for long periods of time, the coilscould overheat or even burn out. The CoolMag featurereduces the power of the magnets when the drill motor isnot active. Therefore, it won't build up heat.
CS Unitec high-density dual-coil magnets are ground, notcast, and are wound into two circles to increase thesurface area and density of the magnetic field.
CS Unitec is the industry leader in:• Power-to-weight ratios• Strongest clamping force with
high-density (HD) dual-coil magnets• Magnetic drills for tapping• Annular Cutters: TiAlN, HSS, cobalt
steel and carbide-tipped
Our drills have unique features:• Variable-speed, multiple-geared models• Electric, pneumatic and hydraulic power• Reversible motors for tapping
and machining• Swivel base stand for
hard-to-reach areas
Rugged construction andsophisticated functionality.
Custom machines for unique applications
CountersinkingReamingTappingTwist Drilling
OverheatingProtection with CoolMagCoolMag
Made in GermanyPowered by
Portable Magnetic Drilling Machines
Intuitive magnets, ergonomic controlsand simple operation for superior cuts.
Our engineers can create a drill, drill rig, or otherapplication-specific arrangement to meet your needs.See page 51 for more information, or call 1-800-700-5919 for design assistance.
ARMOR-PLATED™TiAlN Cutters
are ideal for all drillingapplications. A highsurface hardness andgreater lubricity allow fordrilling at high operatingtemperatures with morepower and speed.
Keyless, quick-change
system for annularcutters saves time
and money.Just twist and lock.
Magnetic force is the key to safety and success.The magnetic force of your magnet depends on a number of factors: æ Thickness of material being drilled æ Coatings or paint layers on material æ Chips, dirt or grease between the magnet and the material
Simple, ergonomic arrangementof controls for one-handedoperation. Emergency-offfunction for quick shutdown.
High power at low speeds.Electronic torque controlprevents damage to motor.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
PORT
ABL
E M
AG
NET
IC D
RILL
S
3
Integrated cable routing: MAB Series
The new generation of our MAB portable magnetic drillingmachines has been developed for increased safety. Thisincludes complete cable routing within the casing.
æ No threading and getting caught
æ No tearing or snapping off
the payback is in the performance.
Our Electronic Safety Shutoff Sensorautomatically shuts down the drill motor if the magnetloses contact with the material. This emergency-offfeature helps to protect both operator and equipment.
Electronic SafetyShutoff Sensor
SafeMagSystem
for Active SafetyIQ Magnetic System
LED green... the magneticadhesion meets the minimumrequirements. Drilling can take place.
LED red… insufficient magnetic force.Drilling should not take place. Possible causes aretoo-thin material, coatings of paint, scale or zinc.
The SAFEMAG™ System measures whether the magnet has sufficient adhesive force onthe material. An LED indicator on the switch panel warns you of insufficient magnetic force(Red Light) or tells you if the correct force is present (Green Light).
The value is in the engineering…
WarrantyProducts of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase. This warranty doesnot apply to normal wear or products which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its AuthorizedService Representatives.If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center,transportation prepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.CS Unitec, Inc.’s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product. There are noother warranties expressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses exceptingonly the cost or expense of repair or replacement as described above.
SafetyOperators of any power tool should use appropriate safety precautions for work being performed. This includes safety chains, eye protection, hearingprotection, gloves and more. Follow instructions included in operating manual.
MA
CH
INES
AN
D A
NN
ULA
R C
UTT
ERS
Tool and Accessory Index
• 1-800-700-5919 • Visit our Web site at www.csunitec.com4
Portable Magnetic Drills p. 8-33
P1 p. 8ø 1-3/8" cutter capacityø 1/2" twist drill capacity
MAB 150 p. 12ø 1-1/2" cutter capacityFor drilling in tight spaces
MAB 425 p. 14ø 1-3/8" cutter capacityø 5/8" twist drill capacity
MAB 455 p. 16ø 2" cutter capacityø 7/8" twist drill capacity2 speeds
MAB 485 p. 18ø 2" cutter capacityø 7/8" twist drill capacityø 15/16" tapping capacityReversible, 2-gear motor
MAB 525 p. 20ø 2-1/2" cutter capacityø 1" twist drill capacityø 15/16" tapping capacityReversible, 2-gear motor
MAB 825 & 845 p. 22ø 4" cutter capacityø 1-1/4" twist drill capacityø 1-1/8" tapping capacitySwivel base (MAB 845)Reversible, 4-gear motor
MAB 1300 p. 24ø 5-1/8" cutter capacityø 1-3/4" twist drill capacityø 1-5/8" tapping capacityReversible, 4-gear motorThe ultimate in power
AutoMAB 1500 p. 27ø 1-1/2" cutter capacityAutomatic feed
AIRBOR™ AB-4300 p. 32Pneumatic powerø 2-1/16" cutter capacityø 1/2" twist drillATEX for hazardous environments
HB-4400 p. 33Hydraulic powerø 2-1/16" cutter capacityø 1/2" twist drillFor marine, construction and underwater applications
CSU Series p. 28-31ø 1-1/4" to 4" cutter capacityReversible for tapping
MDM 40 p. 10ø 1-1/2" cutter capacity
AC
CES
SORI
ES A
ND
OTH
ER T
OO
LS
5
Made in GermanyPowered by
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Lubricants p. 42
Pilot Pins, Drill Chucks and Tapping Tools p. 42-43
Arbors and Extensions p. 44-45
Power Assist p. 44
Countersinks, Drill/Taps and Chip Guard p. 45
Drilling Starter Kits p. 46
Power Worker Magnetic Stick p. 46
MOBIL CLAMP p. 47Convert magnetic drilling machine to bench drill
Drilling Stand and Vise p. 48Convert hand drill to drill press
Vacuum Plates p. 49For channeled plates and smooth surfaces
Pipe Saddle Clamp System p. 50Safe, secure drilling of pipes and tubular material
Annular Cutters p. 34-41
HSS Unibroach® p. 36-37High-speed steel7/16" to 5-1/8" diameter1", 2" and 3" depthSpecial sizes available
TiAlN ARMOR-PLATEDUnibroach™ p. 38-39For higher working temperatures7/16" to 5-1/8" diameter1", 2" and 3" depth
TCT Hornet p. 40-41Tungsten carbide-tipped5/8" to 5-1/8" diameter1", 2-3/8" and 3-3/8" depth
Cobalt/Large-dia. Cutters p. 40Cobalt CuttersLarge-diameter Cutters
Custom-engineered Machines p. 51
Electric, Slow-speed Electric p. 55-56
Electric Drive Units/Special Motors p. 57
Pneumatic Drills/Drive Units p. 58
Pneumatic/Hydraulic Corner Drills p. 59
Pneumatic/Hydraulic Rotary Hammers p. 60
Pneumatic Woodboring Drills p. 61
Pneumatic/Hydraulic Nut Runners p. 62
Pneumatic/Hydraulic Drive Units p. 63
Beveling, Deburring, Faceting and Finishing Machines p. 52-54
EKF Multi-purpose Beveling Machine p. 52
SKF Portable Beveling Machine for Plates and Pipes p. 53
PTX Eco Smart Linear Grinding System p. 54
ROLEI® BE 5 Sheet Metal Deburring Machine p. 54
Custom Machines & Motors, Hand-held Drills, Drive Units and More p. 51, 55-63
Accessories p. 42-50
PORT
ABL
E M
AG
NET
IC D
RILL
SMagnetic Drill Comparison Chart
• 1-800-700-5919 • Visit our Web site at www.csunitec.com6
P1Page 8
MDM 40Page 10
MAB 150Page 12
MAB 425 Page 14
MAB 455 Page 16
MAB 485 Page 18
MAB 525 Page 20
MAB 825MAB 845Page 22
Annular CuttersDiameter (ø)
up to ø 1-3/8" up to ø 1-1/2" up to ø 1-1/2" up to ø 1-3/8" up to ø 2" up to ø 2" up to ø 2-1/2" up to ø 4"
Twist DrillsDiameter (ø)
up to ø 1/2" up to ø 5/8" up to ø 7/8" up to ø 7/8" up to ø 1" up to ø 1-1/4"
TappingDiameter (ø)
up to ø 15/16" up to ø 15/16" up to ø 1-1/8"
CountersinkingDiameter (ø)
up to ø 1-9/16" up to ø 2" up to ø 2"
ReamingDiameter (ø)
up to ø 3/4" up to ø 7/8" up to ø 1-1/4"
Stroke 6-1/3" 3-1/8" 1" 6-1/3" 6-1/3" 6-1/3" 6-1/3" 10"
Weight 26-1/2 lbs. 24 lbs. 24 lbs. 29 lbs. 29 lbs. 29 lbs. 35 lbs. 55 lbs.
Speed Range 1(RPM)
400 440 400 430 250 50-250 70-280 40-110
Speed Range 2(RPM)
760 450 100-450 180-580 65-175
Speed Range 3(RPM)
140-360
Speed Range 4(RPM)
220-600
� � �
� � �
� � � � �
Electronic SafetyShutoff Sensor
� � � � � �
Tool Holder Set Screw Set Screw Set Screw Set Screw Quick-changekeyless
Quick-changekeyless
Quick-changekeyless
Quick-changekeyless
Morse Taper (MT) MT2 MT2 MT3 MT3
Safety FrictionClutch
�
Torque Control � �
Swivel Base �
Magnet Size 6-5/8" x 3-1/3" 6-1/2" x 3-1/4" 6-5/16" x3-3/16"
6-5/8" x 3-1/3 6-5/8" x 3-1/3 6-5/8" x 3-1/3 7-1/8" x 3-1/2" 8-5/8" x 4-1/3"
SafeMagSystem
CoolMAGCoolMag
PORT
ABL
E M
AG
NET
IC D
RILL
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 7
Made in GermanyPowered by
Max. hole diameterup to 5-1/8"
Max. twist drillingup to 1-3/4"
Max. tappingup to 1-5/8"
PneumaticHydraulic
Allows thread cutting
Overheatingprotection
Magnet adhesionindicator
Shuts down motor ifmagnetic contact lost
Swivel base through30˚ and 3/4"
MAB 1300Page 24
AIRBOR™
Page 32
HB 4400Page 33
AutoMAB1500Page 27
CSU 32ACCSU 32RLPage 28
CSU 50ACCSU 50RLPage 29
CSU 80ACPage 30
CSU 100/3Page 31
up to ø 5-1/8" up to ø 2-1/16" up to ø 2-1/16" up to ø 1-1/2" up to ø 1-1/4" up to ø 2" up to ø 3-3/16" up to ø 4"
up to ø 1-3/4" up to ø 1/2" up to ø 1/2" up to ø 1/2" up to ø 7/8" up to ø 1-1/4" up to ø 1-1/4"
up to ø 1-5/8" up to ø 3/4"
(CSU 32RL only)
up to ø 15/16"
(CSU 50RL only)
up to ø 1-1/8"
up to ø 3"
up to ø 2"
3.35"(12" w/out retainer)
up to 10-1/4" 3-3/4" 3" 5-3/4" 6" 10" 10"
112 lbs. 43 lbs. 48-1/2 lbs. 37-1/2 lbs. 24 lbs. 29 lbs. 57 lbs. 57 lbs.
30-80 400 0-630 360 450 250 100 40-140
50-120 450 175 120-480
130-350 245
210-550 385
� �(CSU 32RL only)
�(CSU 50RL only)
�
� � � � �
� � � � �
�
Set Screw Set Screw Set Screw Set Screw Set Screw Quick-changekeyless
Quick-changekeyless
Quick-changekeyless
MT4 MT2 MT3 MT3
�
� � � � � �
�
14" x 4-3/4" 8-3/4" x 3-1/2" 7-1/4" x 3" 7-1/8" x 3-1/2" 6-5/16" x 3-1/4" 6-1/2 x 3-1/2" 9" x 4-3/8" 9" x 4"
SpecialFeaturesSpecialFeatures
PORT
ABL
E M
AG
NET
IC D
RILL
SP1Lightweight, powerful drill for holes up to 1-3/8" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Powerful • Reliable
• 10 Amp double-insulated motor
• Compact, 13" high
• Lightweight, 26.5 lbs.
• Designed for heavy-duty use
Drill up to 1-3/8" dia.
• Uses annular cutters or twistdrills
• Twist drilling up to 1/2" diameterwith optional 3-jaw chuck(IBC 18), stroke length 4"
• Internal lubrication withpressure pump bottle
Made in GermanyPowered by
Integrated Safety
• Simple, ergonomic arrangementof controls for one-handedoperation
• Emergency-off function
8
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
Cutter capacity 1 3/8" dia.
400ø 13/8"
Cutter Capacity Speed Range (RPM)
ø 1/2"
Twist Drill /Countersink
61/3"
Stroke(length)
Equipped with Electronic Safety Shutoff Sensor
With a 1/2" chuck (Part No.IBC 18), this model easilyconverts to a standard drillpress with a 4" stroke forconventional twist drills.
Pressure pumpbottle providesautomaticinternallubrication(included).
4"stroke
Adjustable Precision Guidance
Switches forPower andMagneticAdhesion
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 1 3/8" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Model P1
312
334
41,9
246
269 163
84
117
168
48
P1 Specifications
Model P1 Specifications
Motor Power 10 Amp / 110 Volt
Weight 26.5 lbs.
Hole Capacity 13/8" dia.
Speed 400 RPM
Magnet Base Size 31/3" W x 65/8" L
Dimensions 13" H x 11" L x 61/2" W
Magnetic Force (1" plate) 3750 lbs.
Arbor Bore 3/4"
Lubrication Manual, with pressure pump
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
9
10.59" 6.42"
4.61"
9.69"1.65"
13.1
5"
12.2
8"
See pages 34-41 for our HSS, TiAlNand Carbide-tipped cutters.
See page 42-50for lubricants, including cutting oil and pastes, as well asother portable magnetic drill accessories.
1.89"
3.31"6.61"
StandardEquipmentalso includesauto lubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
1 Magnetic drilling machine
1 Pilot pin
1 Plastic carrying case
1 Safety chain
1 Hexagon socket screw key SW 4
1 Cutting oil pump bottle
1 Operating manual
1 Warranty certificate
Standard Equipment
Optional 1/2" gearedchuck (Part No. IBC 18) to convert theP1 to a standard drillpress with a 4" stroke.
Made in GermanyPowered by
MDM 40Heavy-duty compact hole drilling machinewith internal cable routing
Powerful • Reliable
• 9.25 Amp double-insulated motor
• Compact, 13" high
• Lightweight, 24 lbs.
• Designed for continuous use
• Intelligent electronic torquecontrol
Drill up to 1-1/2" dia.
• Uses annular cutters
• Integrated cutting oil reservoir
• Automatic internal lubrication
440ø 11/2"
Cutter Capacity Speed Range (RPM)
Made in GermanyPowered by
Special Feature
• Internal cable routing protects themotor power cord from externaldamage
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
31/8"
Stroke(length)
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
PORT
ABL
E M
AG
NET
IC D
RILL
S
10
Cutter capacity 1 1/2" dia.
All CS Unitechigh-density
dual-coil magnetsare ground, not cast,and are wound into twocircles to increase the
surface area and density ofthe magnetic field.
StandardEquipmentalso includesauto lubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
† Steel case intendedmainly for shippingpurposes; damagemay occur in transit.
Model MDM 40
MDM 40 Specifications
Model MDM 40 Specifications
Motor Power 9.25 Amp / 110 Volt
Weight 24 lbs.
Hole Capacity 11/2" dia.
Speed 440 RPM
Magnet Base Size 61/2" L x 31/4" W
Dimensions 13" H x 91/2" L x 7" W
Magnetic Force (1" plate) 2640 lbs.
Arbor Bore 3/4"
Automatic Lubrication Included
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Steel shipping case†
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
1 Warranty certificate
Made in GermanyPowered by
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
PORT
ABL
E M
AG
NET
IC D
RILL
S
11
Cutter capacity 1 1/2" dia.
6.5"
9.5" 7"
13"
3.25"
400ø 11/2"
Cutter Capacity Speed Range (RPM)
1"
Stroke(length)
PORT
ABL
E M
AG
NET
IC D
RILL
SMAB 150Horizontal motor mount for drilling in tight spacesCutter capacity
1 1/2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
* Model MAB 150 accepts cutters with a 3/4" weldonshank and a maximum depth of cut of 1".
Switches for powerand magnet adhesion
are arranged forsimple,
uncomplicatedoperation.
Powerful • Reliable
• 9.25 Amp double-insulated motor
• Ultra compact, 7" high
• Lightweight, 24 lbs.
• Designed for continuous use
• Intelligent electronic torquecontrol
Drill up to 1-1/2" dia.*
• Uses annular cutters
• Integrated cutting oil reservoir
• Automatic internal lubrication
Made in GermanyPowered by
Integrated Safety
• Internal cable routing
• Simple, ergonomic arrangementof controls for one-handedoperation
12
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
Internalcable routing
protects the motorpower cord fromexternal damage
Optional ratchet-styleadvancing mechanismfor work in spaces with
limited clearance.(14mm square drive)
Automatic internallubrication withpressure pump bottle
MAB 150 uses standard3/4" shank annular cutters
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity1 1/2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
StandardEquipmentalso includesauto lubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
† Steel case intendedmainly for shippingpurposes; damagemay occur in transit.
Advancing lever can be mounted on eitherthe left or right side of the MAB 150.
Model MAB 150
MAB 150 Specifications
Model MAB 150 Specifications
Motor Power 9.25 Amp / 110 Volt
Weight 24 lbs.
Hole Capacity 11/2" dia.
Speed 400 RPM
Magnet Base Size 65/16" L x 33/16" W
Dimensions 7" H x 127/8" L x 71/2" W
Magnetic Force (1" plate) 2640 lbs.
Arbor Bore 3/4"
Automatic Lubrication Included
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
13
Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Steel shipping case†
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
1 Warranty certificate
Made in GermanyPowered by
7.0
9"
Model MAB 150 accepts cutters with3/4" weldon shank. This unit has amaximum depth of cut of 1".
See pages 34-41 for our HSS, TiAlNand Carbide-tipped cutters.
1.30" 6.30"
12.87" 7.44"
3.15"
1.73"
430 / 760ø 13/8"
Cutter Capacity Speed Range (RPM)
ø 5/8"
Twist Drill /Countersink
SafeMag™
Magnet ForceIndicator
61/3"
Stroke(length)
PORT
ABL
E M
AG
NET
IC D
RILL
SMAB 425High speed and two gears for cutting and twist drillingCutter capacity
1 3/8" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
With a 1/2" chuck (Part No.IBC 17), this model easilyconverts to a standard drillpress with a 7 1/2" stroke for
conventional twist drills.
Powerful • Reliable
• 9.25 Amp double-insulated motor
• 15-1/2" high, 29 lbs.
• High-speed, 2-speed gearbox,ideal for annular cutters andtwist drills
• Designed for continuous use
• Intelligent electronic torquecontrol
Drill up to 1-3/8" dia.
• Uses annular cutters
• Twist drilling up to 5/8" diameterwith optional chuck (IBC 17)
• Integrated cutting oil reservoir
• Automatic internal lubrication
Made in GermanyPowered by
Integrated Safety
• Green/Red LED magnetic forceindicator for safe operation
• Internal cable routing
• Simple, ergonomic arrangementof controls for one-handedoperation
• Emergency-off function
14
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
The high speed of the MAB 425 is a great match forthe TCT Hornet series of sintered carbide annular
cutters. See page 40-41 for more information.
Internalcable routing
protects the motorpower cord fromexternal damage
Equipped with Electronic Safety Shutoff Sensor (see p. 3)
71/2"stroke
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 1 3/8" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
StandardEquipmentalso includesauto lubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
Model MAB 425
MAB 425 Specifications
Model MAB 425 Specifications
Motor Power 9.25 Amp / 110 Volt
Weight 29 lbs.
Hole Capacity 13/8" dia.
Twist Drill Capacity 5/8" dia.
Speeds 430 / 760 (2 gears)
Magnet Base Size 31/3" W x 65/8" L
Dimensions 151/2" H x 111/2" L x 61/3" W
Magnetic Force (1" plate) 3080 lbs.
Arbor Bore 3/4"
Automatic Lubrication Included
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
15
Standard Equipment
1 Magnetic drilling machine
1 Pilot pin
1 Molded plastic carrying case
1 Safety chain
1 Hexagon socket screw key SW 4
1 Operating manual
1 Warranty certificate
Made in GermanyPowered by
3.31"2.40"
15.4
7 -
21.4
6"
11.50" 6.30"
14.6
1"
6.61"
1.22"
250 / 450ø 2"
Cutter Capacity Two-Speed (RPM)
ø 7/8"
Twist Drill /Countersink
SafeMag™
Magnet ForceIndicator
61/3"
Stroke(length)
PORT
ABL
E M
AG
NET
IC D
RILL
SMAB 455High power with keyless quick-change chuck systemCutter capacity
2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
With a 3/4" chuck (Part No.IBC 22), or MT2, this modeleasily converts to a standarddrill press with a 5" stroke for
conventional twist drills.
Powerful • Reliable
• 10.5 Amp double-insulated motor
• 17-1/4" high, 29 lbs.
• High-speed, 2-speed gearbox,ideal for annular cutters andtwist drills
• Designed for continuous use
• Intelligent electronic torquecontrol
Drill up to 2" dia.
• Uses annular cutters
• Twist drilling up to 7/8" (with optional chuck IBC 22)
• Integrated cutting oil reservoir
• Automatic internal lubrication
Made in GermanyPowered by
Keyless Cutter Mount
• Quick-change keyless cuttersystem for 3/4" Weldon shank
Integrated Safety
• Green/Red LED magneticforce indicator for safeoperation
• Internal cable routing
• Simple, ergonomicarrangement of controls forone-handed operation
• Emergency-off function
16
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
Internalcable routing
protects the motorpower cord fromexternal damage
Equipped with Electronic Safety Shutoff Sensor (see p. 3)
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
StandardEquipmentalso includesmolded plasticcarrying case,operatingmanual, autolubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
Model MAB 455
MAB 455 Specifications
Model MAB 455 Specifications
Motor Power 10.5 Amp / 110 Volt
Weight 29 lbs.
Hole Capacity 2" dia.
Twist Drill Capacity 7/8" dia.
Speeds 250 / 450 RPM (2 gears)
Magnet Base Size 31/3" W x 65/8" L
Dimensions 171/4" H x 115/8" L x 7" W
Magnetic Force (1" plate) 3750 lbs.
Arbor Bore 3/4"
Spindle MT2
Automatic Lubrication Included
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
17
Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
2 Pilot pins - 1" and 2" depth
1 Safety chain
1 Drift key MT2
1 Warranty certificate
Made in GermanyPowered by
2.24"
1.50"
3.4
6"
11.61" 7.01"
14.6
1"
6.61"
17.2
4 -
23.5
4"
3.31"
50-250100-450
ø 2"
Cutter Capacity 2-gear VariableSpeed (RPM)
ø 7/8" / ø 19/16
Twist Drill /Countersink
SafeMag™
Magnet ForceIndicator
61/3"
Stroke(length)
PORT
ABL
E M
AG
NET
IC D
RILL
SMAB 485Versatile for workshop and assembly applicationsCutter capacity
2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Powerful • Reliable
• 10.5 Amp double-insulated motor
• 17-1/4" high, 29 lbs.
• High-speed, variable-speedoilbath gearbox, ideal forannular cutters and twist drills
• Designed for continuous use
• Intelligent electronic torquecontrol
Drill up to 2" dia.Tap up to 15/16" dia.
• Uses annular cutters
• Twist drilling up to 7/8" dia.(with optional chuck IBC 22)
• Tapping capacity 3/16"to 15/16" dia.
• Integrated cutting oil reservoir
• Automatic internal lubrication
Made in GermanyPowered by
Keyless Cutter Mount
• Quick-change keyless cuttersystem for 3/4" Weldon shank
Integrated Safety
• Green/Red LED magnetic forceindicator for safe operation
• Internal cable routing
• Simple, ergonomicarrangement of controls forone-handed operation
• Emergency-off function
18
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
Variable-speedControl
Electronics
CoolMag™
OverheatProtection
Reversible(CW/CCW)
ø 3/4" /ø 15/16"
Ream /Tap
Optional Geared Chuck
With a 3/4" chuck (Part No. IBC 22), or MT2, thismodel easily converts to a standard drill presswith a 5" stroke for conventional twist drills.
Internalcable routing
protects the motorpower cord fromexternal damage
Equipped with Electronic Safety Shutoff Sensor (see p. 3)
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
StandardEquipmentalso includesmolded plasticcarrying case,operatingmanual, autolubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
Model MAB 485
MAB 485 Specifications
Model MAB 485 Specifications
Motor Power 10.5 Amp / 110 Volt
Weight 29 lbs.
Hole Capacity 2" dia.
Twist Drill Capacity 7/8" dia.
Tapping Capacity 15/16" dia.
Speeds 50-250 and 100-450 RPM
Magnet Base Size 31/3" W x 65/8" L
Dimensions 171/4" H x 115/8" L x 7" W
Magnetic Force (1" plate) 3750 lbs.
Arbor Bore 3/4"
Spindle MT2
Automatic Lubrication Included
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
19
Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
2 Pilot pins - 1" and 2" depth
1 Safety chain
1 Drift key MT2
1 Geared drill chuck with MT2
Tap collet adapters - 3/8", 1/2"
and 3/4"
1 Warranty certificate
Made in GermanyPowered by
1.50"
3.4
6"
Shown with optional Pipe Saddle ClampSystem for safe, secure drilling of pipes andtubular material. See page 50 for details.
11.61" 7.01"
14.6
1"
6.61"
17.2
4 -
23.5
4"
2.24" 3.31"
70-280180-580
ø 21/2"
Cutter Capacity 2-gear VariableSpeed (RPM)
ø 1" / ø 2"
Twist Drill /Countersink
SafeMag™
Magnet ForceIndicator
61/3"
Stroke(length)
MAB 525High power, ideal for production useCutter capacity
2 1/2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Powerful • Reliable
• 14.5 Amp double-insulated motor
• 19" high, 35 lbs.
• High-speed, 2-speed oilbathgearbox, ideal for annularcutters and twist drills
• Designed for continuous use
• Intelligent electronic torquecontrol
Drill up to 2-1/2" dia.Tap up to 15/16" dia.
• Uses annular cutters
• Twist drilling up to 1"(with optional chuck IBC 21)
• Tapping capacity 15/16"
• Integrated cutting oil reservoir
• Automatic internal lubrication
Made in GermanyPowered by
Keyless Cutter Mount
• Quick-change keyless cuttersystem for 3/4" Weldon shank
20
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
Variable-speedControl
Electronics
CoolMag™
OverheatProtection
ø 7/8" /ø 15/16"
Ream / Tap
Reversible(CW/CCW)
PORT
ABL
E M
AG
NET
IC D
RILL
S
Internalcable routing
protects the motorpower cord fromexternal damage
Equipped with Electronic Safety Shutoff Sensor (see p. 3)
With a 3/4"chuck (Part No.IBC 21), or MT3,this model easilyconverts to astandard drillpress with a 5"
stroke forconventionaltwist drills.
Integrated Safety
• Green/Red LED magnetic force indicator for safe operation
• Internal cable routing
• Simple, ergonomic arrangement of controls for one-handed operation
• Emergency-off function
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 2 1/2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
StandardEquipmentalso includesmolded plasticcarrying case,operatingmanual, autolubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
Model MAB 525
19.1
7 - 2
5.08
”
14.6
0”
3.54
”
1.33”
2.08” 7.09”
6.73”
3.54”
11.65”
MAB 525 Specifications
Model MAB 525 Specifications
Motor Power 14.5 Amp / 110 Volt
Weight 35 lbs.
Hole Capacity 21/2" dia.
Twist Drill Capacity 1" dia.
Tapping Capacity 15/16" dia.
Speeds 70-280 and 180-580 RPM
Magnet Base Size 31/2" W x 71/8" L
Dimensions 19" H x 113/4" L x 63/4" W
Magnetic Force (1" plate) 8000 lbs.
Arbor Bore 3/4"
Spindle MT3
Automatic Lubrication Included
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
21
Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
2 Pilot pins - 1" and 2" depth
1 Safety chain
1 Drift key MT3
1 Geared drill chuck with MT3
Tap collet adapters - 1/4", 3/8",
1/2" and 3/4"
1 Warranty certificate
Made in GermanyPowered by
See pages 34-41 for our HSS, TiAlNand Carbide-tipped cutters.
ø 4"
Cutter Capacity 4-gear VariableSpeed (RPM)
ø 11/4" / ø 2"
Twist Drill /Countersink
SafeMag™
Magnet ForceIndicator
10"
Stroke(length)
PORT
ABL
E M
AG
NET
IC D
RILL
S
Ideal for steel engineering, plant construction and moreCutter capacity 4" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Powerful • Reliable
• 16 Amp double-insulated motor
• 4-speed oilbath gearbox forapplications requiring highpower
• Designed for continuous use
• Infinitely variable torque control and full-wave control electronics
Drill up to 4" dia.Tap up to 1-1/8" dia.
• Uses annular cutters
• Twist drilling and reaming up to 1-1/4" dia.
• Tapping up to 1-1/8"
• Optional geared chuck IBC 21
• Integrated cutting oil reservoir
• Automatic internal lubrication
• Swivel base (model MAB 845)
MAB 825
Made in GermanyPowered by
Keyless Cutter Mount
• Quick-change keyless cuttersystem for 3/4" Weldon shank
• Arbor for 1-1/4" Weldon shank
Integrated Safety
• Green/Red LED magnetic forceindicator for safe operation
• Internal cable routing
• Simple, ergonomic arrangement of controls for one-handed operation
• Emergency-off function
22
Variable-speedControl
Electronics
CoolMag™
OverheatProtection
ø 11/4" / ø 11/8"
Ream / Tap Reversible(CW/CCW)
40-11065-175140-360220-600
Internalcable routing
protects the motorpower cord fromexternal damage
Equipped with Electronic Safety Shutoff Sensor (see p. 3)
For swivelbase, orderMAB 845(see page 23)
MAB 825 &MAB 845
OptionalPower AssistSee page 44
4 Gearswith Variable
Speed
Countersinking
Reaming
Tapping
Twist Drilling
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 4" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
StandardEquipmentalso includesoperatingmanual, autolubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
Model MAB 825 & 845
MAB 825 &MAB 845 Specifications
Model MAB 825 & 845 Specifications
Motor Power 16 Amp / 110 Volt
Weight 55 lbs.
Hole Capacity 4" dia.
Twist Drill Capacity 11/4" dia.
Tapping Capacity 11/8" dia.
Speeds 40-110, 65-175140-360, 220-600 RPM
Magnet Base Size 41/3" W x 85/8" L
Dimensions 185/8" H x 147/16" L x 97/16" W
Magnetic Force (1" plate) 6600 lbs.
Arbor Bore 3/4" and 11/4", standard
Spindle MT3
Automatic Lubrication Included
Swivel Base Order MAB 845
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
23
Standard Equipment
1 Magnetic drilling machine
1 Quick-change arbor system
KEYLESS Weldon 3/4"
1 Arbor 11/4" Weldon, MT3
4 Pilot pins - 1", 2", 3" and 4" depth
1 Safety chain
1 Hexagon socket screw key SW 6
1 Drift key MT3
1 Warranty certificate
1 Carrying case
Made in GermanyPowered by
Model MAB 845 features a swivelbase providing 30˚ movement leftand right and 3/4" forward andbackward.
3/4"
30°
4.33"1.65"2.58"
1.85"
14.41" 9.41"
22.0
5"
8.66"
18.7
0 -
28.5
4"
Rolling Transport Case
Optional robust transport case withwheels, carrying handle and sturdyclosures. Protect your MAB825/845 from water and dust withthis rugged case.
Order No. ZHK 825
PORT
ABL
E M
AG
NET
IC D
RILL
SMAB 1300Large holes – up to 51/8" diameterTapping up to 15/8" diameter
Cutter capacity 5 1/8" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Powerful • Reliable
• 20 Amp double-insulated motor
• 34-1/2" high, 112 lbs.
• 4-speed oilbath gearbox forapplications requiring high power
• Designed for continuous use
• Infinitely variable torque controland full-wave control electronics
Drill up to 5-1/8" dia.Tap up to 1-5/8" dia.
• Uses annular cutters7/16" to 5-1/8" dia., 1" and 2" depth13/16" to 4-3/4" dia. for 4" depth
• Twist drilling up to 1-3/4" - usesMT4, countersinking up to 3" dia.
• Tapping up to 1-5/8"
• Reaming up to 2"
• Automatic internal lubrication
Made in GermanyPowered by
Integrated Safety
• Green/Red LED magnetic forceindicator for safe operation
• Equipped with Electronic SafetyShutoff Sensor (see p. 3)
• Emergency-off function
24
ø 5-1/8"
Cutter Capacity 4-gear VariableSpeed (RPM)
ø 1-3/4" / ø 3"
Twist Drill /Countersink
SafeMag™
Magnet ForceIndicator
3.35"(12" withoutretainer)
Stroke(length)
Variable-speedControl
Electronics
CoolMag™
OverheatProtection
ø 2" / ø 1-5/8"
Ream / Tap Reversible(CW/CCW)
30-8050-120130-350210-550
Ideal for use with TCT Carbide cutters
up to 51/8" dia. –see pages 40-41.
Power Assist,standard
See page 44
4 Gearswith Variable
Speed
OptionalSpecial-PurposeCutting Tool
Countersinking
Reaming
Tapping
Twist Drilling
Equipped withElectronic
Safety ShutoffSensor (see p. 3)
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 5 1/8" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
StandardEquipmentalso includesauto lubrication,safety strap,carabin hook,gloves, safetyglasses, earprotection andallen keys.
Model MAB 1300
MAB 1300 Specifications
Model MAB 1300 Specifications
Motor Power 20 Amp / 110 Volt
Weight 112 lbs.
Hole Capacity 51/8" dia.**
Twist Drill Capacity 13/4" dia.
Tapping Capacity 15/8" dia.
Speeds 30-80, 50-120130-350, 210-550 RPM
Magnet Base Size 43/4" W x 14" L
Dimensions 341/2" H x 191/2" L x 10" W
Magnetic Force (1" plate) 23,600 lbs.
Arbor Bore 11/4" (3/4" adapter included)
Spindle MT4
Automatic Lubrication Included
* 220 Volt / 50 Hz also available** Maximum hole diameter is with TCT Carbide cutters - see p. 40-41.
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
25
Standard Equipment
1 Magnetic drilling machine
1 Carrying case on wheels
1 Arbor adapter to 3/4" Weldon
1 Safety chain
1 Hexagon socket screw key SW6
1 Drift key MT4
1 Operating manual
1 Warranty certificate
Made in GermanyPowered by
4.72"3.26"
2"
Accessories
10"
27"
14.17"
22.0
5 -
34.4
5"
19.5"
See page 26for tappingaccessoriesand wheeledcarrying case.
ZHK 1300wheeled
carrying caseincluded with
MAB 1300
PORT
ABL
E M
AG
NET
IC D
RILL
SMAB 1300 Accessories
Cutter capacity 5 1/8" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Made in GermanyPowered by
26
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
Tap Collets and Reducing Adapters
Thread Order No.1/4 ZGT-1/45/16 ZGT-5/163/8 ZGT-3/87/16 ZGT-7/161/2 ZGT-1/29/16 ZGT-9/16
Thread Order No.5/8 ZGT-5/811/16 ZGT-11/163/4 ZGT-3/41 ZGA 033
(1-1/4" Weldon shank)1-1/4 ZGA 042 (1-1/4" Weldon shank)
Order Morse Tap Tap Shank Tap ShankNumber Taper Size Diameter SquareCS 70308 3 5/8" .480 .366CS 70301 3 3/4" .590 .442CS 70302 3 7/8" .697 .523CS 70303 3 1" .800 .600CS 70304 3 1-1/8" .896 .672CS 70403 4 1" .800 .600CS 70404 4 1-1/8" .896 .672CS 70405 4 1-1/4" 1.021 .766CS 70406 4 1-3/8" 1.108 .831CS 70407 4 1-1/2" 1.233 .925CS 70408 4 1-5/8" 1.305 .979
Tap Collets with 3/4" or 1-1/4" Weldon shankall threads shown are ASA Standard (or DIN 376 for metric)
Watertight, shock-proof and robust –the right protection for your machine.
Four large ABS locks securethe robust plastic case
Order No. ZHK 1300
Robust transport case with wheels, carrying handle andsturdy closures. Protect your investment from water anddust with this rugged case. Four large ABS locks and an
interior configuration customized for machine to securedrill and accessories during
transit. Lightweight, heavy-duty plastic constructionand robust ABS wheels.
Drill not included withZHK 1300. Purchase of MAB 1300 drill includes ZHK 1300 case. See page 23 for MAB 825/845 case.
Rolling Transport Case for MAB 1300
• Positive, accurate driving of larger-sized taps• No slippage or tap damage• Tap shank square engages with square drive socket• 3 set screws secure tap in holder
Heavy-duty Tap Holder
Bushing – Reduces1-1/4" Weldon shank to3/4" Weldon shankOrder No. ZAP 200
Reducing SleeveDIN 2185Order No. ZRH 430 for MT 4:3(adapts MT4 to MT3)
Tap Collets and Reducing Adapters
Heavy-duty Tap Holder
Rolling Transport Case for MAB 1300
See page 43for additionaltapping options.
360ø 11/2"
Cutter Capacity Speed Range (RPM)
3"
Stroke(length)
Heavy-duty compact drill with automatic feed
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 1 1/2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Powerful • Reliable
• 10.5 Amp double-insulated motor
• Compact, lightweight andportable: 16-1/8" high, 37-1/2 lbs.
• Power feed automaticallycontrols drill pressure tomaintain optimal RPM and feedrate
• Designed for continuous use
• Ideal hole cutting machine forsteel fabricators, contractorsand plant maintenanceprofessionals
Drill up to 1-1/2" dia.
• Uses annular cutters
• Automatic feed mechanismwith automatic stop and manual retraction
• Integrated cutting oil reservoir
• Automatic internal lubrication
Made in GermanyPowered by
Integrated Safety
• Internal cable routing
• Simple, ergonomicarrangement of controls forone-handed operation
• Emergency-off function
AutoMAB 1500
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
27
Standard Equipmentalso includes autolubrication, safetystrap, carabin hook,gloves, safety glasses,ear protection andallen keys.
† Steel case intended mainly for shipping purposes; damage may occur in transit.
Standard Equipment
1 Magnetic drilling machine
1 Steel carrying case†
1 Safety chain
1 Operating manual
1 Warranty certificate
Model AutoMAB 1500 Specifications
Motor Power 10.5 Amp / 110 Volt
Weight 371/2 lbs.
Hole Capacity 11/2" dia.
Speed 360 RPM
Magnet Base Size 31/2" W x 71/8"
Dimensions 161/8" H x 11" L x 713/16" W
Magnetic Force (1" plate) 2640 lbs.
Arbor Bore 3/4"
Automatic Lubrication Included
* 220 Volt / 50 Hz also available
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
PORT
ABL
E M
AG
NET
IC D
RILL
SCSU 32AC & CSU 32RLBest power-to-weight performance in the industryCutter capacity
1 1/4" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Standard Equipment includes autolubrication, auto chuck cutter holder,1/2" geared chuck, safety chain,carabin hook, allen keys, pilot pins andcarrying case. (CSU 32AC shown)
Powerful • Reliable
• Strong 8.2 Amp motor
• Compact, lightweight andportable – 14-1/4" high, 24 lbs.
• Designed for continuous use
• Model CSU 32RL variable speed
Drill up to 1-1/4" dia.
• Uses annular cutters; 5-3/4" stroke
• Twist drilling up to 1/2" dia.;7-1/2" stroke with chuck
• Tapping up to 3/4" dia.*
• Automatic lubrication system
Integrated Safety
• SafeMag™ Green/Red LEDmagnetic force indicator for safeoperation
• Equipped with CoolMag™ overheatprotection
• Emergency-off function
28
CSU 32AC Specifications
Motor Power 8.2 Amp / 110 Volt
Weight 24 lbs.
Hole Capacity 11/4" dia.
Twist Drill Capacity 1/2" dia.
Tapping Capacity 3/4" (CSU 32RL only)
Speed 450 RPM
Magnet Base Size 65/16" W x 31/4" H
Dimensions 141/4" H x 91/2" L x 43/8" W
Magnetic Force (1" plate) 3080 lbs.
Arbor Bore 3/4"
Spindle 1/2"-20 UNF Thread
Automatic Lubrication Included
Reversible Motor Order CSU 32RL
Power Assist Order Accessory ZPA 401
* Model CSU 32RL for tapping up to 3/4" dia.
With a 1/2" chuck (PartNo. IBC 17), these
models easily convert tostandard drill presseswith a 61/2" stroke for
conventional twist drills.
Tap collet set includedwith Model CSU 32RL
Model CSU 32RLhas a variable-speed
(100-450 RPM),reversible motor fortapping up to 3/4"
Lightweight, two-speed, high-performance drills
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 2" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
CSU 50AC & CSU 50RL
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
29
With a 3/4" chuck (Part No.IBC 22) or MT2, these
models easily convert tostandard drill presses with
a 5" stroke forconventional twist drills.
Standard Equipment includes auto lubrication, autochuck cutter holder, 1/2" geared chuck, safety chain,carabin hook, allen keys, pilot pins and carrying case.(CSU 50RL shown)
Keyless Cutter Mount
• Easy "twist and lock" keyless arbor
CSU 50AC Specifications
Motor Power 10.5 Amp / 110 Volt
Weight 29 lbs.
Hole Capacity 2" dia.
Twist Drill Capacity 7/8" dia.
Tapping Capacity 15/16" (CSU 50RL only)
Speeds 1: 250 RPM, 2: 450 RPM
Magnet Base Size 61/2" W x 31/2" H
Dimensions 161/2" H x 9" L x 63/8" W
Magnetic Force (1" plate) 3750 lbs.
Arbor Bore 3/4"
Spindle MT2
Automatic Lubrication Included
Reversible Motor Order CSU 50RL
Power Assist Order Accessory ZPA 401
* Model CSU 50RL for tapping up to 15/16" dia.
Powerful • Reliable
• Strong 10.5 Amp motor
• Compact, lightweight andportable – 16-1/2" high, 29 lbs.
• 2-gear variable speed gearbox
• Designed for continuous use
Integrated Safety
• SafeMag™ Green/Red LEDmagnetic force indicator for safeoperation
• Equipped with CoolMag™ overheatprotection
• Emergency-off functionDrill up to 2" dia.
• Uses annular cutters; 10" stroke
• Twist drilling up to 7/8" dia.
• Tapping up to 15/16" dia.*
• Automatic lubrication system
Tap collet set includedwith Model CSU 50RL
Model CSU 50RLhas a variable-speed,reversible motor fortapping up to 15/16"
Optional quick-change tappingchuck with MT2 connection(Model GSW.222) has flexiblecollet to fit taps 5/16" to 5/8"
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
PORT
ABL
E M
AG
NET
IC D
RILL
SCSU 80ACPowerful high-torque motor with multiple speedsCutter capacity
3 3/16" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Standard Equipment includes autolubrication, auto chuck cutter holder,safety chain, carabin hook, allen keys,pilot pins and carrying case†.
† Steel case intended mainly for shippingpurposes; damage may occur in transit.
Powerful • Reliable
• 15 Amp double-insulated motor
• 19-1/2" high, 57 lbs.
• High-speed, 4-speed gearbox,ideal for annular cutters andtwist drills
• Designed for continuous use
Drill up to 3-3/16" dia.
• Uses annular cutters; 10" stroke
• Twist drilling up to 1-1/4" (withoptional chuck IBC 21); 6-1/2"stroke
• Automatic lubrication system
Made in GermanyPowered by
Integrated Safety
• SafeMag™ Green/Red LEDmagnetic force indicator for safeoperation
• Equipped with CoolMag™ overheatprotection
• Emergency-off function
Keyless Cutter Mount
• Quick-change keyless cuttersystem for 3/4" Weldon shank
30
CSU 80AC Specifications
Motor Power 15 Amp / 110 Volt*
Weight 57 lbs.
Hole Capacity 33/16" dia.
Twist Drill Capacity 11/4" dia.
Speeds 1: 100 RPM, 2: 175 RPM
3: 245 RPM, 4: 385 RPM
Magnet Base Size 9" W x 43/8" H
Dimensions 191/2" H x 133/8" L x 71/2" W
Magnetic Force (1" plate) 7040 lbs.
Arbor Bore 3/4" (11/4" also available)
Spindle MT3
Automatic Lubrication Included
Power Assist Order Accessory ZPA 402
* 220 Volt / 50 Hz also available
With a 3/4" chuck (Part No. IBC 21)or MT3, this model easily converts
to a standard drill press with astroke of 61/2".
Powerful reversible motor for drilling and tapping
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 4" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
CSU 100/3RL
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
31
Made in GermanyPowered by
Standard Equipment includes autolubrication, auto chuck cutter holder,safety chain, carabin hook, allen keys,pilot pins and carrying case†.
† Steel case intended mainly for shippingpurposes; damage may occur in transit.
Keyless Cutter Mount
• Quick-change keyless cuttersystem for 3/4" Weldon shank
• Optional 1-1/4" arbor
CSU 100/3RL Specifications
Motor Power 16 Amp / 110 Volt*
Weight 57 lbs.
Hole Capacity 4" dia.
Twist Drill Capacity 11/4" dia.
Tapping Capacity 11/8" dia.
Speeds (variable) 40-140 RPM, 120-480 RPM
Magnet Base Size 9" W x 4" H
Dimensions 191/2" H x 133/8" L x 71/2" W
Magnetic Force (1" plate) 6600 lbs.
Arbor Bore 3/4" (11/4" also available)
Spindle MT3
Automatic Lubrication Included
Power Assist Order Accessory ZPA 402
* 220 Volt / 50 Hz also available
Powerful • Reliable
• 16 Amp double-insulated motor
• 19-1/2" high, 57 lbs.
• 2-gear variable speed gearbox
• Designed for continuous use
Integrated Safety
• SafeMag™ Green/Red LEDmagnetic force indicator for safeoperation
• Equipped with CoolMag™ overheatprotection
• Emergency-off function
Drill up to 4" dia.
• Uses annular cutters; 10" stroke
• Twist drilling up to 1-1/4" dia.; 6-1/2" stroke with geared chuck
• Tapping up to 1-1/8" dia.
• Automatic lubrication system
2 Gearswith Variable
Speed
CountersinkingReaming
TappingTwist Drilling
Optional quick-changetapping chuck with MT2
connection (Model GSW.222)has flexible collet to fit taps
5/16" to 5/8"
PORT
ABL
E M
AG
NET
IC D
RILL
SAIRBOR™ AB-4300
Cutter capacity 2 1/16" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Model AB-4300-2
Safe • Reliable
• Inherently safer than electromagnetic drills inhazardous atmospheres and wet environmentswhere electricity requires "hot work permits"
• ATEX approved
• Industry’s first completely air-operatedmagnetic drill – NO ELECTRICITY!
• Fail-safe permanent magnet isactivated "on" and "off" by airpressure; in the event of a loss ofair flow, the magnet will notdisengage
• 1600 lbs. magnet holdingstrength
32
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
Model AB-4300-2 / AB-4300-2R Specifications
Motor Power (Pneumatic) 1.6 HP
Air Consumption @ 90 PSI 64 CFM (1/2" NPT Air Connection)
Hole Capacity 21/16" dia.
No Load Speed 400 RPM
Magnet Base Size 83/4" W x 31/2" L
Dimensions 131/2" H x 121/2" L x 43/4" W
Magnetic Force (1" plate) 1600 lbs.
Arbor Bore 3/4"
Automatic Lubrication Included
Stroke Length 47/8" Order Model AB-4300-2
Stroke Length 101/4" Order Model AB-4300-2R
With a geared chuckadapter (Part No. IBC 18) andextra rack (Model No. AB-4300-2R), AIRBOR™ easilyconverts to a standard drillpress with a 7 1/2" stroke.
Motor and magnetare powered completely
by compressed air
Model Comparison
AB-4300-2R shown with extra rack up (left)and extra rack down (right).
closed
13 1/2"open
22"closed
13 1/2"open
17 1/2"
w/cutters
4 7/8"w/chuck
1 3/4"Height
Weightlbs.
43kg
20lbs.
38kg
18
Drill Strokew/cutters
10 1/4"w/chuck
7 1/2"
AB-4300-2R AB-4300-2
Drill up to 2-1/16" dia.
• Uses annular cutters
• Twist drilling up to 5/8"
• Powerful 1.6 HP drill motor
• Long drill stroke – up to 101/4"
• Pressurized coolant system lubricatescutter and reduces risk of sparking
400ø 21/16"
Cutter Capacity Speed Range (RPM)
Up to 101/4"
Stroke(length)
1/2"
Twist Drill /Countersink
Pressurizedlubrication system (Part No.9 4002 0020)
Pneumatic power for hazardous environmentsATEX ApprovedATEX Approved
Hydraulic for marine and construction – works underwater
PORT
ABL
E M
AG
NET
IC D
RILL
S
Cutter capacity 2 1/16" dia.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
HB 4400 for Subsea Drilling
�Annular Cutters: pages 34-41 �Accessories: pages 42-50
33
With a 3/4"chuck (Part No.602045A), thismodel easilyconverts to astandard drillpress with a 3"stroke.
Safe • Reliable
• Ideal for industrial, construction, marineand mining applications
• Drill structural steel and other metals
• Hydraulic motor safe for underwater use
• Manually operated permanent magnetwith ratchet control has holding strengthof 1300 lbs.
Drill up to 2-1/16" dia.
• Uses annular cutters
• Twist drilling up to 1/2" dia.
• Automatic lubrication
Model HB 4400 Specifications
Motor Power (Hydraulic) 1.5 HP
Weight 481/2 lbs.
Hole Capacity 21/16" dia.
Twist Drill Capacity 1/2" dia.
No Load Speed, Variable 0-630 RPM
Hydraulic Supply Flow 6.5 GPM @ 2000 PSI
Magnet Base Size 71/4" W x 3" L
Dimensions 181/2" H x 121/2" L x 7" W
Magnetic Force (1" plate) 1300 lbs.
Automatic Lubrication Included
0-630ø 21/16"
Cutter Capacity Speed Range (RPM)
Up to 33/4"
Stroke(length)
1/2"
Twist Drill /Countersink
Model HB 4400Hoses not included
AN
NU
LAR
CU
TTER
SAnnular CuttersAchieve burr-free finished holes, without predrilling or stepdrilling
• 1-800-700-5919 • Visit our Web site at www.csunitec.com34
Precision-ground flutes provide efficient chip clearance,increasing drilling productivity and decreasing cutter breakage
Hardened, high-speed tool steel Weldon Shank
Perfect drilling to close tolerances without runout.The result: a burr-free finished hole.
Benefits of CS Unitec's Cutter Design:
Double-action tooth geometry cuts, splitsand ejects chips more efficiently,
• increasing cutting speed• reducing tooth load • minimizing tool wear• lengthening cutter life
Engineered with a tapered innerwall for smooth, easy slug ejection.
Center hole forpilot pin accuratelyaligns the cutter, allows for internallubrication and removes the slug.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Pilot Pins: How they work…
The pilot pin accuratelycenters cutter over areato be drilled.
During drilling, the pilotpin retracts and allowsinternal coolant to reachthe cutting teeth.
When hole is complete,the slug is automaticallyejected from the cutter.
1: Centering 2: Oiling 2: Ejecting
6-Series HSS Unibroach™ Annular Cutters – Pages 36-37 Fully ground HSS annular cuttersCutting depth: 1" 2" 3" 4"
Drilling ø: 7/16" - 5-1/8" 7/16" - 5-1/8" 3/4" - 5-1/8" 3/4" - 5-1/8"
8-Series ARMOR-PLATED Unibroach™ Annular Cutters – Pages 38-39
Fully ground HSS annular cutters with TiAlN hard coatingCutting depth: 1" 2" 3"
Drilling ø: 7/16" - 5-1/8" 7/16" - 5-1/8" 3/4" - 5-1/8"
9-Series Unibroach™ TCT Hornet Annular Cutters – Pages 40-41
Sintered carbide annular cutters with Tungsten Carbide tipsCutting depth: 1"* 2-3/8" 3-3/8"
Drilling ø: 1/2" - 2" 1/2" - 5-1/8" 3/4" - 5-1/8"
For Cobalt Cutters and special sizes, see page 40.
* 1-3/8" depth for diameters larger than 1-1/2"A
NN
ULA
R C
UTT
ERS
35
� See pages 42-50 for Drill Accessories.
AN
NU
LAR
CU
TTER
SUnibroach® Annular CuttersHigh-speed steel for drilling 3x faster than twist drills
• 1-800-700-5919 • Visit our Web site at www.csunitec.com36
• CNC precision ground for fast penetration, accuracy andlong life
• Flutes run the length of the cutter for efficient chipclearance, increased drilling productivity anddecreased cutter breakage
• Drill holes 3 times faster than twist drills
• Produce reamed-quality, burr-free holes and solid slugs
• Reduce machine size and weight
• Cutting edges are resharpenable
• Eliminate time-consuming, costly pilot holes and step drilling
Annular Cutters are the standard hole-making drills in theindustry. Ideal for heavy-duty use on-site or in the shop, ourHSS Unibroach™ cutters are available in the following sizes:
1" drill depth – ø 7/16" to ø 51/8"2" drill depth – ø 7/16" to ø 51/8"3" drill depth – ø 3/4" to ø 51/8"Special sizes available
• Metric cutters available on request
Unibroach® Stack Cutters are available in diameters from 7/16" to 1 1/8" in 1", 2" and 3" depths. Drill multiple layersof steel without stopping to remove the center slug. Please contact us or consult our price list for more information.
* HSS Cutters must be used with lubricant.See page 42 for CS Unitec lubricants and cutting oil.
See page 46 for HSS Annular Cutter Starter Kit.
6-Series HSS
AN
NU
LAR
CU
TTER
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
� See pages 42-50 for Drill Accessories.
37
Cutter KitsEach HSS steel cutter kit comes with thefollowing: 9/16",11/16", 13/16", 15/16", 1-1/16", pilot pin & carrying case.
Order No. Description
6-1-0016-1-002
1" depth Cutter Kit2" depth Cutter Kit
Pilot Pins for 6-SeriesOrder No. Description
For 3/4" Shanks7-3-102
7-3-202
7-3-302
1/2" - 3" dia., 1" depth
1/2" - 3" dia., 2" depth
3/4" - 3" dia., 3" depth
For 1-1/4" Shanks7-3-1002
7-3-2002
7-3-3002
3-1/16" - 5" dia., 1" depth
3-1/16" - 5" dia., 2" depth
3-1/16" - 5" dia., 3" depth
† We also stock 4" depth HSS cutters and MetricHSS cutters. Larger diameters and special sizesavailable upon request. Please call us for pricingand delivery.
Shank size:
3/4" for cutters up to 3" dia.
1-1/4" for cutters 3-1/16" to 4" dia.
6-1-1146-1-1166-1-1186-1-1206-1-1226-1-1246-1-1266-1-1286-1-1306-1-1326-1-1346-1-1366-1-1386-1-1406-1-1426-1-1446-1-1466-1-1486-1-1506-1-1526-1-1546-1-1566-1-1586-1-1606-1-1626-1-1646-1-166
6-1-1686-1-1706-1-1726-1-1746-1-1766-1-1786-1-1806-1-1826-1-1846-1-1866-1-1886-1-1906-1-1926-1-1946-1-196
6-1-1986-1-11006-1-11026-1-11046-1-11066-1-11086-1-11106-1-11126-1-11146-1-11166-1-11186-1-11206-1-11226-1-11246-1-11266-1-1128
7/16" 1/2" 9/16"5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16"1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2" 2-1/16"
2-1/8" 2-3/16" 2-1/4" 2-5/16" 2-3/8" 2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"
3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8"3-7/16"3-1/2"3-9/16"3-5/8"3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"
Order No. Diameter
Option for Cutters 3" and 4" Depth
7-3-402 2-piece pin for 3" and 4" depthcutters with 8mm pilot hole.
1" Depth*
N/AN/AN/AN/AN/A6-1-3246-1-3266-1-3286-1-3306-1-3326-1-3346-1-3366-1-3386-1-3406-1-3426-1-3446-1-3466-1-3486-1-3506-1-3526-1-3546-1-3566-1-3586-1-3606-1-3626-1-3646-1-366
6-1-3686-1-3706-1-3726-1-3746-1-3766-1-3786-1-3806-1-3826-1-3846-1-3866-1-3886-1-3906-1-3926-1-3946-1-396
6-1-3986-1-31006-1-31026-1-31046-1-31066-1-31086-1-31106-1-31126-1-31146-1-31166-1-31186-1-31206-1-31226-1-31246-1-31266-1-3128
3/4" 13/16" 7/8"15/16" 1"1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16"1-5/8" 1-11/16"1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"2-1/16"
2-1/8" 2-3/16" 2-1/4" 2-5/16" 2-3/8" 2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"
3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8"3-7/16"3-1/2"3-9/16"3-5/8"3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"
Order No. Diameter3" Depth**
6-1-2146-1-2166-1-2186-1-2206-1-2226-1-2246-1-2266-1-2286-1-2306-1-2326-1-2346-1-2366-1-2386-1-2406-1-2426-1-2446-1-2466-1-2486-1-2506-1-2526-1-2546-1-2566-1-2586-1-2606-1-2626-1-2646-1-266
6-1-2686-1-2706-1-2726-1-2746-1-2766-1-2786-1-2806-1-2826-1-2846-1-2866-1-2886-1-2906-1-2926-1-2946-1-296
6-1-2986-1-21006-1-21026-1-21046-1-21066-1-21086-1-21106-1-21126-1-21146-1-21166-1-21186-1-21206-1-21226-1-21246-1-21266-1-2128
7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8"15/16" 1"1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16"1-3/4" 1-13/16" 1-7/8"1-15/16" 2" 2-1/16"
2-1/8" 2-3/16" 2-1/4" 2-5/16" 2-3/8" 2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"
3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8"3-7/16"3-1/2"3-9/16"3-5/8"3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"
Order No. Diameter2" Depth*
* Cutters in shaded area above include a Pilot Pin.
** Cutters with 3" depth have an 8mm dia. pilot hole.
AN
NU
LAR
CU
TTER
SUnibroach® Annular CuttersTiAlN coating for up to 4x tool life, less friction and more power
• 1-800-700-5919 • Visit our Web site at www.csunitec.com38
• 3 to 4 times longer tool life with TiAlN coating
• Drill with less friction and more power
• Withstands higher working temperatures –up to 1480˚F (800˚C)
• Dry drilling or lubricating with water simplifiesworking conditions and cleanup*
• Prevents cold weld – metal chips do not adhere to the cutter
• Ideal for structural steel and hard metal
• 3/4" dia. shank (11/4" dia. shank available)* After the TiAlN coating is worn, lubricate with cutting oil
ARMOR-PLATED Unibroach™ cutters are available inthe following sizes:
1" drill depth – ø 7/16" to ø 51/8"2" drill depth – ø 7/16" to ø 51/8"3" drill depth – ø 3/4" to ø 51/8"
• Metric and larger diameter cutters available on request
ARMOR-PLATED Unibroach™ Cutters, at 90Rc hardness, are the state-of-the-art in hole cutting technology. They multiply service life, reduce cost andincrease productivity.
Less Friction = Less Heat = More Holes!
See page 46 for ARMOR-PLATED Unibroach™TiAlN Annular Cutter Starter Kit.
8-Series ARMOR-PLATED TiAlN
AN
NU
LAR
CU
TTER
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
� See pages 42-50 for Drill Accessories.
39
ARMOR-PLATED Unibroach™ TiAlN Cutters:
• Drill with less friction and more power• Withstand higher working temperatures – up to 1480˚F (800˚C) • Dry drill or lubricate with water to simplify working conditions and cleanup**• Prevent cold weld – metal chips do not adhere to the cutter• Are ideal for structural steel and hard metal
** After the TiAlN coating is worn, lubricate with cutting oil
8-1-114 T8-1-116 T8-1-118 T8-1-120 T8-1-122 T8-1-124 T8-1-126 T8-1-128 T8-1-130 T8-1-132 T8-1-134 T8-1-136 T8-1-138 T8-1-140 T8-1-142 T8-1-144 T8-1-146 T8-1-148 T8-1-150 T8-1-152 T8-1-154 T8-1-156 T8-1-158 T8-1-160 T8-1-162 T8-1-164 T8-1-166 T
7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2" 2-1/16"
Order No. Diameter1" Depth
N/AN/AN/AN/AN/A8-1-324 T8-1-326 T8-1-328 T8-1-330 T8-1-332 T8-1-334 T8-1-336 T8-1-338 T8-1-340 T8-1-342 T8-1-344 T8-1-346 T8-1-348 T8-1-350 T8-1-352 T8-1-354 T8-1-356 T8-1-358 T8-1-360 T8-1-362 T8-1-364 T8-1-366 T
3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2" 2-1/16"
Order No. Diameter3" Depth*
8-1-214 T8-1-216 T8-1-218 T8-1-220 T8-1-222 T8-1-224 T8-1-226 T8-1-228 T8-1-230 T8-1-232 T8-1-234 T8-1-236 T8-1-238 T8-1-240 T8-1-242 T8-1-244 T8-1-246 T8-1-248 T8-1-250 T8-1-252 T8-1-254 T8-1-256 T8-1-258 T8-1-260 T8-1-262 T8-1-264 T8-1-266 T
7/16" 1/2" 9/16" 5/8" 11/16"3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16"1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16"1-7/8" 1-15/16" 2" 2-1/16"
Order No. Diameter2" Depth
* Cutters with 3" depth have an 8mm dia. pilot hole.
ARMOR-PLATED Cutter KitsEach armor-plated cutter kit comes withthe following: 9/16",11/16", 13/16", 15/16", 1-1/16", pilot pin & carrying case.
Order No. Description
8-1-001 T8-1-002 T
1" depth Cutter Kit2" depth Cutter Kit
Pilot Pins for 8-SeriesOrder No. Description
For 3/4" Shanks7-3-102
7-3-202
7-3-302
1/2" - 3" dia., 1" depth
1/2" - 3" dia., 2" depth
3/4" - 3" dia., 3" depth
Option for Cutters 3" and 4" Depth
7-3-402 2-piece pin for 3" and 4" depthcutters with 8mm pilot hole.
3"+ Diameter CuttersMetric and larger diameter cuttersavailable on request.
Shank size: 3/4" up to 3" dia.
ARMOR-PLATEDUnibroach™ Cutters, at90Rc hardness, are thestate-of-the-art in holecutting technology.They multiply servicelife, reduce cost andincrease productivity.
ARMOR-PLATED = Less Friction = Less Heat = More Holes!Increase tool life and achieve faster feed rates
Unibroach® Annular CuttersTungsten carbide-tipped for high-speed cutting
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
• Use high-speed RPM for best resultsand faster holemaking
• Ideal for drilling steel with rust or paint• Will outlast High-speed Steel cutters• Leaves a burr-free finished hole• Available in all sizes (fractional and
metric) • 3/4" or 11/4" shank
TCT Hornet cutters are availablein the following sizes:
1" drill depth – ø 1/2" to ø 11/2"1-3/8" drill depth – ø 19/16" to ø 2"2-3/8" drill depth – ø 1/2" to ø 51/8"3-3/8" drill depth – ø 3/4" to ø 51/8"• Metric cutters available on request
Closeup of tungsten-carbide teeth.
See following page forpart numbers.
Drill perfect holes up to 51/8" diameter without runout
• Standard with 3/4" or 11/4" shank diameters
• More cutting teeth to distribute the load evenly
• Increase tool life and achieve faster feed rates
• Use on milling machines, drill presses, CNC and otherequipment
• A solid slug has a higher value for scrap metal
• Available in TCT Carbide, HSS, Cobalt and ARMOR-PLATED Unibroach™
Unibroach® Large-diameterHole Cutting
Unibroach® Cobalt Cutters
• 3/4" shank is standard for cutters up to 3" dia. • Metric cutters available on request • See our price list for part numbers
• Unibroach®
Cobalt Cutters are made with 5% cobalt toincrease resistance to wear
• Excellent results when drilling high-tensile steel anddifficult-to-machine materials
• Available with TiAlN coating upon request
• Available for hole sizes up to 5" dia.
AN
NU
LAR
CU
TTER
S
40
9-Series - TCT Carbide Hornet
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
� See pages 42-50 for Drill Accessories.
Cutter KitsEach hornet carbide cutter kit comes withthe following: 9/16",11/16", 13/16", 15/16",1-1/16", pilot pin & carrying case.
Order No. Description
9-1-001 C9-1-002 C
1-3/8" depth Cutter Kit2-3/8" depth Cutter Kit
**We also stock Metric Carbide cutters.Please call us for pricing and delivery.Larger diameters and special sizes areavailable upon request.
Shank size:3/4" for cutters up to 3" dia.
1-1/4" for cutters 3-1/16 to 5-1/8" dia.
9-1-116 C9-1-118 C9-1-120 C9-1-122 C9-1-124 C9-1-126 C9-1-128 C9-1-130 C9-1-132 C
1/2"9/16"5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1"
Order No. Diameter
1" Depth
9-1-324 C9-1-326 C9-1-328 C9-1-330 C9-1-332 C9-1-334 C9-1-336 C9-1-338 C9-1-340 C9-1-342 C9-1-344 C9-1-346 C9-1-348 C9-1-350 C9-1-352 C9-1-354 C9-1-356 C9-1-358 C9-1-360 C9-1-362 C9-1-364 C9-1-366 C9-1-368 C
3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"2-1/16"2-1/8"
Order No. Diameter
9-1-216 C9-1-218 C9-1-220 C9-1-222 C9-1-224 C9-1-226 C9-1-228 C9-1-230 C9-1-232 C9-1-234 C9-1-236 C9-1-238 C9-1-240 C9-1-242 C9-1-244 C9-1-246 C9-1-248 C9-1-250 C9-1-252 C9-1-254 C9-1-256 C9-1-258 C9-1-260 C9-1-262 C9-1-264 C
1/2"9/16"5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"
Order No. Diameter
2-3/8" Depth
9-1-266 C9-1-268 C9-1-270 C9-1-272 C9-1-274 C9-1-276 C9-1-278 C9-1-280 C9-1-282 C9-1-284 C9-1-286 C9-1-288 C9-1-290 C9-1-292 C9-1-294 C9-1-296 C9-1-298 C9-1-2100 C9-1-2102 C9-1-2104 C9-1-2106 C9-1-2108 C9-1-2110 C9-1-2112 C
2-1/16"2-1/8"2-3/16"2-1/4"2-5/16"2-3/8"2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8"3-7/16"3-1/2"
Order No. Diameter
9-1-2114 C9-1-2116 C9-1-2118 C9-1-2120 C9-1-2122 C9-1-2124 C9-1-2126 C9-1-2128 C9-1-2130 C9-1-2132 C9-1-2134 C9-1-2136 C9-1-2138 C9-1-2140 C9-1-2142 C9-1-2144 C9-1-2146 C9-1-2148 C9-1-2150 C9-1-2152 C9-1-2154 C9-1-2156 C9-1-2158 C9-1-2160 C9-1-2162 C
3-9/16"3-5/8"3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"4-1/16"4-1/8"4-3/16"4-1/4"4-5/16"4-3/8"4-7/16"4-1/2"4-9/16"4-5/8"4-11/16"4-3/4"4-13/16"4-7/8"4-15/16"5"5-1/8"
Order No. Diameter
9-1-370 C9-1-372 C9-1-374 C9-1-376 C9-1-378 C9-1-380 C9-1-382 C9-1-384 C9-1-386 C9-1-388 C9-1-390 C9-1-392 C9-1-394 C9-1-396 C9-1-398 C9-1-3100 C9-1-3102 C9-1-3104 C9-1-3106 C9-1-3108 C9-1-3010 C9-1-3112 C9-1-3114 C9-1-3116 C
2-3/16"2-1/4"2-5/16"2-3/8"2-7/16"2-1/2"2-9/16"2-5/8"2-11/16"2-3/4"2-13/16"2-7/8"2-15/16"3"3-1/16"3-1/8"3-3/16"3-1/4"3-5/16"3-3/8'3-7/16"3-1/2"3-9/16"3-5/8"
Order No. Diameter
3-3/8" Depth
9-1-3118 C9-1-3120 C9-1-3122 C9-1-3124 C9-1-3126 C9-1-3128 C9-1-3130 C9-1-3132 C9-1-3134 C9-1-3136 C9-1-3138 C9-1-3140 C9-1-3142 C9-1-3144 C9-1-3146 C9-1-3148 C9-1-3150 C9-1-3152 C9-1-3154 C9-1-3156 C9-1-3158 C9-1-3160 C9-1-3162 C
3-11/16"3-3/4"3-13/16"3-7/8"3-15/16"4"4-1/16"4-1/8"4-3/16"4-1/4"4-5/16"4-3/8"4-7/16"4-1/2"4-9/16"4-5/8"4-11/16"4-3/4"4-13/16"4-7/8"4-15/16"5"5-1/8"
Order No. Diameter
9-1-134 C9-1-136 C9-1-138 C9-1-140 C9-1-142 C9-1-144 C9-1-146 C9-1-148 C
9-1-150 C9-1-152 C9-1-154 C9-1-156 C9-1-158 C9-1-160 C9-1-162 C9-1-164 C
1-9/16" 1-5/8" 1-11/16" 1-3/4" 1-13/16" 1-7/8" 1-15/16" 2"
1-3/8" DepthOrder No. Diameter
1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-7/16" 1-1/2"
Order No. Diameter
Pilot Pins for 9-SeriesOrder No. Description
For 3/4" Shanks9-3-102 C
9-3-202 C
9-3-302 C
5/8" - 2" dia., 1-3/8" depth
11/16" - 2-5/16" dia., 2" depth
13/16" - 2" dia., 3" depth
For 1-1/4" Shanks9-3-202A C
9-3-302A C
2-3/8" - 5-1/8" dia., 2" depth
2-3/8" - 5-1/8" dia.,3" depth
Option for Cutters 3" Depth
7-3-402 2-piece pin for 3" depth cutterswith 8mm pilot hole.
AN
NU
LAR
CU
TTER
S
41
LUBR
ICA
NTS
AN
D P
ILO
T PI
NS
LubricantsCoolant extends the life of cutting tools
• 1-800-700-5919 • Visit our Web site at www.csunitec.com42
Cutting Oil• High-performance, biodegradable,
non-hazardous oils and pastes
• Oils for heavy removal of metal,including stainless steel
• Chlorine-free (MSDS on bottle/tub)
• Not necessary to dilute with water
Pressurized Coolant BottleUse with any automatic internal lubrication system.Part No. 9 4002 0020
Upgrade your drill's cooling system: see page 44 for arbors with automatic cooling.
• Milled channel efficiently supplies internallubrication to cutting teeth
• Available for cutter diameters ranging from7/16" to 51/8" and 1", 2", 3" and 4" depth of cut
• See price list for part numbers
Pilot Pins for Cutters
Cutting Oil:Part No. ZHS 006 (quart)Part No. ZHS 005 (gallon)
Your cutting tools will work cooler, longer and moreefficiently with ProLube™ Lubricants from CS Unitec.• Prolong tool life by reducing friction and wear
• Unique composition provides excellent adhesionto cutting tools for maximum lubrication
• Corrosion inhibitor• Non-toxic
ProLube™ Ideal for cutting steel, stainless steel and hard metals
ProLube PasteCS 7030-71212 oz. tub
ProLube LiquidWater soluble 16:1
CS 7010-504 - 1 gal. bottle
Accessories
DRI
LL C
HU
CKS
AN
D TA
PPIN
G T
OO
LS
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 43
• Two capacities: 1/2" and 3/4"
• Four chucks and adapters to fit all magnetic drills:
A) IBC 17 – 1/2" chuck for MAB 425 and CSU 32 series
B) IBC 18 – 1/2" chuck with 3/4" shank for AIRBOR™ and HB 4400 (fits all drills with 3/4" arbor bore)
C) IBC 21 – 3/4" chuck with MT3 shank for MAB 825, CSU 80AC and CSU 100/3RL
D) IBC 22 – 3/4" chuck with MT2 shank for MAB 455, MAB 525 and CSU 50 series
Drill Chucks for Straight Shank Twist Drills
A
B
CD
• Manufactured from high-quality HSS to ASAStandard (or DIN 376 for metric)
• Ideal for CS Unitec's portable drilling andtapping machines and other drills
Quick-change Tapping Tools, Collets and Chucks
Quick-change tapping chuck, Part No. GSW-222, with MT2connection, complete with flexible collet to tap 5/16" to 5/8". For use with CSU 50RL and MAB 485 magnetic drills.
Tap collets fit magnetic drills with 3/4" arbor bore.Available for taps 1/4" through 3/4".Hold standard USA taps conforming to ASA.
Part No. GSW-830C tapping chuck includes two variableclamp collets to tap 3/8" to 1 1/8". It is the least expensivesystem if you will tap more than 4 sizes. GSW-830C has anMT3 connection. For use with all MT3 drills.
Variable clamp collets for use in tap chuck No. GSW-830:Part No. GST-160 variable clamp collet for shanks 3/8" – 5/8".Part No. GST-230 variable clamp collet for shanks 5/8" – 7/8".
Part No. GSW-444 quick-change tapping chuck withMT4 connection (for MAB 1300). Collets not included.GSS-420 collet for 1/2" shanks GSS-433 collet for 1" shanks
GSS-422 collet for 5/8" shanks GSS-442 collet for 11/4" shanks
GSS-427 collet for 3/4" shanks
See page 26 for additional tapping accessories.
Tap up to1-5/8"
max. dia.
GSW-830C
AccessoriesArbors for Annular Cutters
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
• Use on any magnetic drill stand, drill press or shop equipmentwith a Morse Taper intake of No. 2, 3 or 4
• Available for Annular Cutter shank sizes of 3/4" or 11/4" Weldon
• Available for automatic internal cooling or manual cooling
• Keyless for fast, no-tools changeoverfor 3/4" dia. shank annular cutters
• Automatic internal cooling
• Turn, click… go!
ZSS 200 – Morse Taper No. 2for 3/4" dia. shankannular cutters
ZSS 300 – Morse Taper No. 3for 3/4" dia. shankannular cutters
turn,click…
GO!GO!
Quick-lock Arbor with Automatic Internal Cooling
Keyless,quick-change
system for annular cutters saves time
and money.
Just twist and lock!
ZIA 219M – Morse Taper No. 23/4" arbor bore
ZIA 319M – Morse Taper No. 33/4" arbor bore
ZIA 30/75 – Morse Taper No. 33/4" arbor bore, 3" depth
ZIA 419M – Morse Taper No. 43/4" arbor bore
ZIA 219KN – Morse Taper No. 23/4" arbor bore
ZIA 319KN – Morse Taper No. 33/4" arbor bore
ZIA 30/32 – Morse Taper No. 311/4" arbor bore
Manual Cooling Automatic Cooling
The Power Assist is a standard capstan, designed with delayed torquetransfer. This decreases the load on both cutter and drilling machine,allowing the machine to maintain max. RPM under full load.
• Reduces drilling time • Prevents cutter breakage• Extends lifespan of cutter/drill bit and machine
Power Assist
ZPA 401 – Power Assist for CSU 32 and CSU 50 series
ZPA 402 – Power Assist for CSU 80 and CSU 100/3 series
PowerAssistCapstan
ARB
ORS
AN
D P
OW
ER A
SSIS
T
44
Accessories
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Extra-long holders extend stroke of drillsExtensions for Annular Cutters
• Extend cutter reach up to 18"
• Available for magnetic drills with 3/4" arbor bore or MT3
• Also available with 3 flats for straight shank drillchucks and R8 shanks for drill presses
• Drill difficult-to-reach areas
• Extend cutter reach over theside or through an existing hole*
* Hole diameter must be larger than 1 5/16"to accommodate width of extension
R8
3 Flats forGearedChucks x3/4" arbor
MT2 orMT3 x3/4" arbor
7-9-902 – 2" extension7-9-903 – 3" extension7-9-906 – 6" extension7-9-912 – 12" extension7-9-918 – 18" extension
We also offer extensions with the following connections:
3/4" WeldonShank
(2 Flats)
We also offer extensions with the following connections:
2-in-1 Drill/TapsDrill and tap with one tool
82˚ and 90˚ Countersinks
ZSS 050 – for MAB 150, MAB 425, MAB 485 and MAB 525
Protects against flying chips when drillingDetachable Chip Guard
• Manufactured of HSS with 5% cobalt
• 3/4" Weldon shank
Countersink hole sizes:
CTS 30 from 5/8" to 2 " / 82˚
CTS 50 from 5/8" to 2 1/8" / 90˚
National Coarse Threads (UNC) – sizes available:
CS500 – 1/2" x 13 UNCCS625 – 5/8" x 11 UNCCS750 – 3/4" x 10 UNC
AN
NU
LAR
CU
TTER
EX
TEN
SIO
NS
45
CS875 – 7/8" x 9 UNCCS1000 – 1" x 8 UNCCSDT-UNCKIT – 1/2", 5/8", 3/4" & 1" drill/taps
STA
RTER
KIT
S A
ND
PO
WER
WO
RKER
MA
GN
ETAccessories
• 1-800-700-5919 • Visit our Web site at www.csunitec.com46
Rare earth magnet cleans metal parts and shavingsPower Worker – simple cleanup of steel chips
POW 100 • Easily clean up sharp-edged drill chips, screws and other metal parts
• Items are safely ejected off of Power Worker without hand contact
• Ideal for hard-to-reach spaces
Starter Kits
ZST 100P Kit Includes:
Set of 5 annular cutters (one each of the following):
9/16" dia. x 1" depth (8-1-118) 11/16" dia. x 1" depth (8-1-122)
13/16" dia. x 1" depth (8-1-126) 15/16" dia. x 1" depth (8-1-130)
1-1/16" dia. x 1" depth (8-1-134)
2 pilot pins • 1 cutter storage box • 1 Power Worker magnetic stick (POW 100)
1 quart high-performance cutting oil (ZHS 006)
See pages 38-39 for more information on Armor-Plated TiAlN annular cutters.
ZST 100S Kit Includes:
Set of 5 annular cutters (one each of the following):
9/16" dia. x 1" depth (6-1-118) 11/16" dia. x 1" depth (6-1-122)
13/16" dia. x 1" depth (6-1-126) 15/16" dia. x 1" depth (6-1-130)
1-1/16" dia. x 1" depth (6-1-134)
2 pilot pins • 1 cutter storage box • 1 Power Worker magnetic stick (POW 100)
1 quart high-performance cutting oil (ZHS 006)
See pages 36-37 for more information on HSS annular cutters.
HSS Steel Cutter Starter Kit
Armor-Plated TiAlN Cutter Starter Kit
CS Unitec starter kits offer the essentials you needto begin drilling. We have two options that provide acost-effective tool set for your application.
Other annular cutter kits are available –contact CS Unitecfor details.
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Clamping DevicesMOBIL CLAMP
Powerful grip
Jaws with step andprism for clamping offlat and round material.
Fine adjustment
in longitudinalmovement by anadjusting screwaccurately set tothe machiningpoint.
A true advance in magnetic drilling technology: The new clamping system MOBIL CLAMP can be used toconvert a magnetic drilling machine into a bench drill.
Extends the functionality of your portable magnetic drill. Ideal forparts that previously could only be drilled in the workshop – theycan now be machined on site. MOBIL CLAMP makes it possibleto drill, countersink, ream or tap small parts, since these can bemounted into the quick clamping device.
With the mounting of a magnetic drilling machine onto thesurface of the vice and the subsequent activation of the magnet,you will have a versatile, stationary drilling machine in next to notime. The magnetic drilling machine becomes a multi-purposemachine: whether large or small applications, flat or high, with the twist drill or the reamer,everything is possible. A stable support, designed for the MOBIL CLAMP clampingdevice, ensures the correct workingheight and a comfortable and reliableoperation.
MOBIL CLAMP
Order No. Jaw Quick-action V-blockwidth clamping jaw clamping jaw
ZMC 180 4" 3.15" (80mm) •(100mm) clamping width
ZMC 300 Base stand for clamping device
ZMC 180
ZMC 300
CLA
MPI
NG
DEV
ICES
47
Clamping DevicesDrilling stand and vise for hand drillsIndustrial drilling pillars for commercial hand drills with 43mm chuck journal diameter.Optimum stability by cast base plate combined with a pillar top of the MAB series. Versatile usability by a drill vise with 4" (100mm) jaw width (special accessories).Screws for slots are available for additional security under higher loads (special accessories).Working stroke of 9" - 17" (230 - 425mm).
Drill not included.Dimensions shown in mm.
Drilling Pillar
Order No. ZBS 100
Vise
Order No. ZST 100jaw width: 4" (100mm) clamping range: 4" (100mm)
Accessories
Screws for T-SlotsOrder No. ZTN 100
Hexagon Nut with CollarOrder No. ZSM 100
CLA
MPI
NG
DEV
ICES
• 1-800-700-5919 • Visit our Web site at www.csunitec.com48
VAC
UU
M P
LATE
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 49
Vacuum PlatesFor applications where drill alone will not adhere to surface
Vacuum Plate for Channeled Plates
Order No. ZAV 301 (vacuum plate only)
Order No. ZAV 310 (vacuum plate andvacuum pump, 110V)
Ideal for channeled plates. High-performancevacuum pump with circular oil lubrication.Clamping plate diameter: 11.8"
Vacuum Plate for Smooth Surfaces
Order No. ZAV 401 (vacuum plate only)
Order No. ZAV 410 (vacuum plate andvacuum pump, 110V)
Ideal for smooth surfaces. High-performancevacuum pump with circular oil lubrication.Clamping plates with two suction surfaces andcut-through drilling area.
PIPE
SA
DD
LE C
LAM
PPipe Saddle Clamp SystemEnsures safe, secure drilling of pipes and tubular material
• 1-800-700-5919 • Visit our Web site at www.csunitec.com50
ZRO 250 Pipe Saddle Clamp System
Pipe diameters 31/4" - 10"Chain length: 351/2"For models: MAB 425, MAB 455, MAB 485,P1, MDM 40 and CSU 32
ZRO 500 Pipe Saddle Clamp System
Pipe diameters 6" - 20" (extension chain available)Chain length: 65"For models: MAB 525, MAB 825, MAB 845, CSU 50,CSU 80, CSU 100/3, AB-4300-2 and HB 4400
Dimensions shown in mm.Dimensions shown in mm.
Ideal for applications requiring the flexibility of clamping on pipesfrom 3-1/4" to 20" diameter, these pipe clamp systems are flexibleand easy-to-use. Swivelling V-blocks fit the contour of the pipe whilethe heavy-duty tension chains securely affix the clamps to the piecebeing drilled. The drilling position can be easily and safely adjusted.
Order No. ZRO 001 – extension chain for ZRO 500pipe saddle clamp.
CU
STO
M-E
NG
INEE
RED
MA
CH
INES
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 51
Custom-engineered MachinesDesign a custom machine for your specific needs
Unusual applications require unique solutions. Wecan help you build custom drills for a wide variety ofapplications. With our considerable experiencebuilding custom drills, our engineers can assist youto create machines that can drill on unevensurfaces, in various directions, and more.
We enjoy a challenge! Contact ustoday for a professional solutionfor your unique application.Our capabilities include:
• In-house CAD design
• Prototype construction
• Manufacturing of specialaccessories
Custom MachineOptions Include:� Reverse Drilling
� Alternative Mounting Configurations
� Magnet Variations
� Motor Customization
� Adjustable Drilling Depth
Call 1-800-700-5919for design assistance.
Machinerendering
above showsreverse-mount
motor fordrilling upside
down.
PORT
ABL
E M
ULT
I-PU
RPO
SE B
EVEL
ING
MA
CH
INE
• 1-800-700-5919 • Visit our Web site at www.csunitec.com52
Multi-purpose Beveling Machine
Portable Beveler Specifications
EKF300.3 EKF450.3 EKF452.3
Beveling angle* 30˚ 45˚ 2.5mm
Bevel width (max.)** 1/4" 1/4" 1/4"
Motor power/Voltage 13.5 Amp / 110 V (220 V / 50 Hz also available)
Cutting speed 3000 SFPM
Cutting inserts 3
Dimensions (L x W x H) 12-1/2" x 5-1/2" x 11-5/8"
Weight 10.5 lbs.
* EKF milling heads are interchangeable. ** Max. bevel width may require several passes, depending on material hardness.
The optimum fixture for stationary deburring of small parts (Order No. ZKF 100)
The EKF multi-purpose beveling machine is designed to bevel30˚ or 45˚ weld seams on steel, stainless steel, nonferrousmetals, brass and plastics. It can also be used to deburr andchamfer; straighten edges, internal and external radii; andcountersink holes from 7/8" diameter.
• Fine adjustment feature for slight chamfers when deburringfor the preparation of weld seams
• Three milling head options – 30˚, 45˚ and 2.5mm
• Ideal for the following applications: Moldmaking (straightenedges, internal and external radii and countersink holesfrom 7/8" dia.); Boiler and process plant construction(prepare weld seams on heat exchangers); Mechanicalengineering (deburr machine parts, chamfer edges toprotect against paint peeling and create visible edges);Sheet metal (deburr cut edges)
Standard equipmentincludes milling head and twoinserts, SW22 key, carryingcase and user’s manual.Please see our Price List foravailable accessories.
Cutting Plates - Sold as pack of 10Order No. SHM 200: 30˚ and 45˚
Order No. SHM 200-E: 30˚ and 45˚ for stainless steelOrder No. SHM 202: 2.5mm radius
30˚ 45˚ 2.5mm radius
One Machine, Three Milling Options
Milling cutter 30°,Chamfer 0 - 1/4"
Milling cutter 45°,Chamfer 0 - 1/4"
Milling cutter 2.5 radius (optional)
EKF300.3 EKF450.3 EKF452.3
Bevel, deburr & chamfer edges of steelplate faster and cleaner than angle grinders
Fine adjustmentPrecise control of
chamfer whendeburring for weldseam preparation
PORT
ABL
E BE
VEL
ING
MA
CH
INE
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 53
Bevel angles from 0˚ to 60˚ on plate and pipes
Precise roller guidance,low friction resistance
Single-operator,straightforward handling
Ideal for beveling pipe6.25" OD and larger
Portable Beveler Specifications
SKF 25
Standard equipment includes one milling head, 10 sintered carbide reversible cutting inserts, toolsfor assembly, built-in pipe roller guide, steelcarrying case and user’s manual. Please see ourPrice List for available accessories.
Cutting Plates - Sold as pack of 20Order No. SHM 800: for beveling carbon and
stainless steel
Beveling angle 0˚ - 60˚
Bevel width (max.)** 3/4"
Motor power 10 Amp
Voltage 110 V (220 V / 50 Hz also available)
Cutting speed 1800 SFPM
Cutting inserts 10
Dimensions (L x W x H) 16-1/2" x 13"
Weight 43 lbs.
** Max. bevel width may require several passes, depending on materialhardness. Steel case intended mainly for shipping purposes; damagemay occur in transit.
CS Unitec’s SKF 25 Beveling Machine provides fast andeasy preparation of weld seams and bevels 0˚ to 60˚ angleson plate or pipe. It is ideal for use on steel, stainless steel,aluminum and nonferrous metals and offers high-qualityperformance that allows for superior weld connections.
• Continuously adjustable angle (0˚ to 60˚) and land width up to 3/4"
• Robust design, single operator control and easyhandling; designed for continuous operation with smoothroller guides
• Anti-vibration system protects electronics and allows formore comfortable operation
• Includes one milling head and 10 indexable insertsfor fast metal removal and extended tool life
• Work on welding angles and weld preparation onpipes/tubes with a minimum OD of 6-1/4" (160mm) withbuilt-in pipe roller guide; ideal for beveling pipe6-1/4" OD and larger
SKF 25
Portable Beveling Machine
LIN
EAR
GRI
ND
ING
SYS
TEM
PTX Eco Smart
• 1-800-700-5919 • Visit our Web site at www.csunitec.com54
Power 12.27 Amp (1350 Watts) 110 Volt / 60 Hz (Also available: 230 Volt / 50 Hz)
Variable speed Variable speed control from 950 to 3700RPM with tachogenerator for constantspeed, even under load
Speed control dial With fine adjustment for using abrasivesat optimum efficiency
Wheel width up to 4" (or 6" wide abrasives)
Wheel diameter up to 4-1/2"
Weight 7.25 lbs. (3.3 Kg)
Sheet Metal Deburring Machine – ROLEI® BE 5
Simple, one-step deburring of sheet metal up to 0.2" thick can be achievedin a single operation with no additional treatment. Two-speed operation –1200 RPM for standard deburring and 600 RPM for fine deburring.
A wide selection ofhollow-core abrasivesis available for thePTX Eco Smart andMULTI-MAX. The lackof a core insert meansthat the abrasives arelighter, easier to useand less expensive.
PTX Eco Smart Specifications
Order Number: 47002A
110 Voltor 230 Volt
The professional surface finisherfor hard, continuous useA revolution in linear grinding! Simply slide on theabrasives and they secure themselves automaticallywhen the machine turns. Fast and easy!
PTX Eco Smart is a multi-functional grinding andpolishing system for flat surfaces and open or closedpipe constructions. It grinds from coarse to very finefinishes and burnishes to a high-gloss finish. It
enhances stainless steel, steel andnonferrous metals including
aluminum, brass, bronze andcopper, as well as wood andrigid plastic.
Sheet with burr after cutting
Deburring on both sidesof the sheet edges2 1
ELEC
TRIC
DRI
LLS
AN
D D
RIV
E U
NIT
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 55
Electric Drills and Drive UnitsHigh-torque, multi-geared and variable-speed motors
Heavy-duty Drills for Industrial and Construction Applications:
• High-torque output
• Variable-speed, two- and four-geared drillsfor optimum speed selection
• Reversible motors and electronic torque controlon selected models
• Ideal for special applications including valve turning, tube rolling and other jobs
• Safety slip clutch on 11/4" capacitiesto protect operator and tool
• Drilling capacities up to 11/4" in steel
• Special OEM motors available on request
• One-year warranty
EHB 16/1.4 S
EHB 16/2.4 S
EHB 16/2.4 S/RL
EAW 16/2 R/L
EHB 20/2.4EHB 32/4.2EAU 34/4EAU 36/4with 4-speed gearboxand variable speed
* All units available in 220 Volt / 50Hz Special Motors available upon request.
7.3
10
10
9
10.5
15.5
20
22
MotorPower(Amps)
110V
110V
110V
110V
110V
110V
110V
110V
Voltage*
5/8"5/8"5/8"
N/A3/4"
11/4"
–
DrillingCapacityin Steel
12
19
19
8
32
112
133
Max.TorqueOutput(ft./lbs.)
NO
NO
YES
YES
NO
NO
YES
Revers-ible
6.8
7
7
7
9.2
15.2
19.5
20
Weight(lbs.)
5/8" Keyless5/8" Geared5/8" Geared5/8" X 16 UN
MT2
MT3
MT3
MT3
Chuck/Arbor
0-500
0-430/0-760
0-430/0-760
510/950
250/450
110/175/245/385
80/130/360/570
50-12080-190110-270180-420
Load Speed (RPM)
Model No.
ModelEHB 20/2.4
Model EHB 16/1.4 S
Model EHB 16/2.4 SModel EHB 16/2.4 S/RL
ModelEHB 32/4.2
SLO
W-S
PEED
ELE
CTR
IC D
RILL
S A
ND
DRI
VE
UN
ITS
• 1-800-700-5919 • Visit our Web site at www.csunitec.com56
Slow Speed: two-geared, variable-speed reversible motors
1/2" and 3/4" Square Driveaccessories allow motorcompatibility for variousdrive applications.*
Up to 11/4" twistdrill capacity
Model EHB 32/2.2 R/RLModel ETE 32/2.3 R/RL
Model ETE 32/2.3 R/RL(shown with optionalSquare Drive adapter)
• High-torque, two-geared and variable-speedreversible motors
• Ideal for drilling, reaming and tapping steel
• Driving applications include mills, spindles, barboring, pipe beveling and valve turning
• Perfect for tube rolling and expanding for fire tube and water tube boilers
• Mechanical safety clutch prevents operator injury ordamage to the tool
• Morse Taper #3 arbor
• One-year warranty
EHB 32/2.2 R/RL
ETE 32/2.3 R/RL
** All units available in 220 Volt / 50Hz*** With Expander (Up to 2 1/2" with Bead Roller)
* 1/2" Square Drive with MT3 – Part No. 830-1230-0503/4" Square Drive with MT3 – Part No. 830-1230-075
16.3
16.3
MotorPower(Amps)
110V
110V
Voltage**
11/4"
N/A
DrillingCap. inSteel
2"
3" ***
TubeRolling(max.)
YES
YES
Revers-ible
14
15
Weight(lbs.)
MT3
MT3
Arbor
92 max.
174 max.
TorqueOutput(ft./lbs.)
YES
NO
TorqueControl
60-140 /200-470
30-75 /90-230
LoadSpeed (RPM)
Model No.
Electric Drills and Drive Units
ELEC
TRIC
DRI
VE
UN
ITS
/ SP
ECIA
L M
OTO
RS
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 57
Special Electric Motor Options
Forward/Reverse Control
Electronic Torque Control
Variable-speed Dial
Gear Selection Knob
Holes for Mounting(EAU 34/4 shown)
Custom DesignOptions Include:� Forward/Reverse
� Variable Speeds
� Multiple Gears
� Spindle: MT or Special
� MultifunctionalControl Boxesor Handles
� 1/2 to 4 HP
� Modular Design
Contact us today toconfigure the motorthat meets your specificdriving applications.
Spindle Options: MT2 / MT3
Square Driveor Threaded
Driving applicationsinclude mills, spindles,bar boring, tube rolling,valve turning and more.
High-torque, reversible electric drill motors for custom applications
Control Boxeswith On/Off,
Variable Speed
PNEU
MA
TIC
DRI
LLS
AN
D D
RIV
E U
NIT
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com58
Pneumatic Drills and Drive UnitsHigh-torque reversible drilling and tapping machines
Model2 1261 0010
• High-torque reversible drilling, tapping and threading machines
• Ideal for drilling, reaming, tube rolling, tube expanding and tapping
• Use for special applications including mills, spindles, slides, controllers,pipe tapping, valve turning and more
• Drill chucks and Morse Taper arbors
• Hammer drills for drilling concretewith up to 2200 blows per minute
• Special OEM air motors available on request
• One-year warranty
Pistol Drills
2 1261 0010
Hammer Drills (for concrete and underwater applications)
2 1266 0010
D-handle Drills
2 1310 0010
2 1311 0010
Morse Taper Drills w/ Feed Spindle
2 2089*
2 2506*
2 2502*
* The last four digits of the Model No. identify the type of throttle.Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
0.7
0.75
0.8
0.8
1.7
2.5
2.5
MotorPower(HP)
850
950
650
650
250
220
80
LoadSpeed(RPM)
1/2"
1/2"
1/2"5/8"
11/4"
11/4"
2"
DrillingCap. inSteel
N/A
N/A
N/A
N/A
1"
2"
21/2"
TubeRollingCap.
7 max.
7 max.
8 max.
8 max.
36 max.
63 max.
173 max.
TorqueOutput(ft./lbs)
93/4"
12"
121/2"
11"
261/2"
261/2"
261/2"
Length
N/A
N/A
N/A
N/A
15/8"
21/2"
21/2"
FeedLength
4.6
6.7
12
12
28
32
37
Weight(lbs.)
21
21
24
24
24
70
70
CFMat 90PSI
1/2" Chuck
1/2" Chuck
1/2" Chuck
MT1
MT3
MT3
MT4
Chuck/Arbor
NO
NO
NO
NO
YES
YES
YES
Revers-ibleModel No.
Model2 1310 0010
See page 60for Rotary
Hammer Drills
Pneumatic Pistol DrillsPneumatic Hammer Drills
Morse Taper Drills w/ Feed Spindle
D-handle Drills
Model2 2089 0030with reverse andsafety twist throttle
Model 2 1266 0010
ATEXATEX
Corner Drills and Drives
CO
RNER
DRI
LLS
AN
D D
RIV
ES
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 59
ATEXATEX
Pneumatic and hydraulic: high-torque drilling, reaming and driving units
Model 2 1801 0030
• Small side-to-side distancefor working in tight spaces
• Self-closing roll throttle
• Built-in oiler for motor
• Ideal for bridge reamingand drilling applications
• One-year warranty
• Visit www.csunitec.comfor dimensions
2 2081*
2 2087*†
2 2088*†
* The last four digits of the Model No. identify the type of throttle. † Square drive accessories available (see above). Please specify the four digits when ordering: 0010 for Lever Throttle or 0030 for Safety Twist Throttle.
13/16"7/8"7/8"
SquareDriveID
413
413
138
TorqueOutput(ft./lbs.)
YES
YES
YES
Revers-ible
3"
3"
2"
TubeRollingCap.
11/2"
11/2"3/4"
TappingCap.
53
53
53
CFM at90 PSI
10.9" x 26.5"
10.9" x 26.5"
10.9" x 26.5"
Height xLength
29
29
29
Weight(lbs.)
1.35
1.35
1.35
MotorPower(HP)
20
20
60
LoadSpeed (RPM)
PneumaticDrive UnitModel No.
Nonreversible
2 1602 0030
2 1701 0030
2 1801 0030
Reversible
2 2104 0030
Model No. 2 1602 0030 has a 3/8" NPT air inlet. 1/2" (13mm) hose is recommended. All other models have 3/4" NPT air inlet. A 1/2" (13mm)hose is recommended for model 2 1701 0030. A 5/8" (15mm) hose is recommended for models 2 1801 0030 and 2 2104 0030.
#1
#2
#3
#4
MorseTaper
5/8"7/8"
11/4"
21/8"
Drilling(in steel)
N/A
N/A
N/A
2"
TubeRollingCap.
7
35
53
86
TorqueOutput(ft./lbs.)
500
270
260
180
LoadSpeed(RPM)
21
49
63
71
CFM at90 PSI
12.5"
20.9"
22.5"
23.8"
Length
7
19
25
37
Weight(lbs.)
0.7
1.8
2.6
3.0
MotorPower(HP)
1/2"5/8"
1"
2"
Reaming(in steel)
PneumaticCorner DrillModel No.
2 1806 0010 #3
MorseTaper
11/4"
Drilling(in steel)
N/A
TubeRollingCap.
60
Torque Output(ft./lbs.)
220
LoadSpeed(RPM)
4 GPM@2000
OilFlow/PSI
21"
Length
25
Weight(lbs.)
3.8
MotorPower(HP)
1"
Reaming(in steel)
HydraulicCorner DrillModel No.
Corner Drills and Bridge Reamers
• Ideal for heavy-duty reaming, tube expandingand tapping
• Perfect for special driving applications,including pipe tapping and valve turning
Slow-speed, High-torqueStraight Drive Units
Model 2 2087 0010with reverse and lever throttle
Square Drive Accessories 2 2089 7020 – 7/8" Male Square Drive to 3/4" Male Square Drive2 2089 7070 – 7/8" Male Square Drive to 1" Male Square Drive6 1016 7940 – 7/8" Male Square Drive to 1" Male Square Drive
with retaining pin
ROTA
RY H
AM
MER
DRI
LLS
• 1-800-700-5919 • Visit our Web site at www.csunitec.com60
Rotary Hammer DrillsPneumatic and hydraulic: powerful percussion drilling forconcrete and masonry
Air Model 2 2404 0010SDS Plus up to 1" dia.
2 2406 0010
2 2418 0010Hydraulic Hammer Drills operate at hydraulic pressures of 1,450 - 2,000 PSI. Available with optional closed center.
0-3400
0-2500
Blows/Minute(BPM)
0-625
0-250
DrillSpeed(RPM)
3" dia.
6" dia.
3/4" dia.
11/4" dia.
TwistDrill
(wood)
0.8 HP
1.8 HP
FlowRange at1450 PSI(GPM)
Powerat 2000PSI
SDS Plus
SDS Max
Dimensions(inches)
18x101/4x4
191/2x111/8x71/2
Weight(lbs.)
15
37
5.8-13.2
2.6-13.2
ToolSystem
1" dia.
2" dia.
Solid BitCapacity(Concrete)
Core BitCapacity(Concrete
)
HydraulicHammer DrillModel No.
Large Masonry BitsSDS Max up to 2" dia.
Small Masonry BitsSDS Plus up to 1" dia.
Hydraulic Model2 2406 0010 SDS Plus
SDS Drill BitsClosed Center Flow Control Valve
2 1266 0010*
2 2404 0010
2 2404 0030*
2 2417 0010** Underwater model – Optional underwater air tool line conditioner to displace moisture, Part No. MS 9105. See page 61.
0-2000
0-3000
0-3000
0-2500
Blows/Minute(BPM)
0-950
0-625
0-625
0-250
DrillSpeed(RPM)
1" dia.
3" dia.
3" dia.
6" dia.
3/8" dia.3/4" dia.3/4" dia.
11/4" dia.
TwistDrill
(wood)
0.75 HP
0.7 HP
0.7 HP
1.6 HP
AirConsum-ption at90 PSI
Powerat 90PSI
1/2" Chuck
SDS Plus
SDS Plus
SDS Max
Dimensions(inches)
12x 81/2x 4
16x 81/2x 4
16x 81/2x 4
191/2x9.8x41/2
Weight(lbs.)
7
11
11
26
21 CFM
21 CFM
21 CFM
53 CFM
ToolSystem
1/2" dia.
1" dia.
1" dia.
2" dia.
Solid BitCapacity(Concrete)
Core BitCapacity(Concrete)
PneumaticHammer DrillModel No.
SDS Plus – Hammer and Drill1" bit capacity for drilling concrete and masonry
SDS Max – Modes of Operation2" bit capacity for drilling concrete and masonry
HydraulicModel
2 2418 0010SDS Max
Hammer with RotationIdeal for concrete drilling
Rotation OnlyFor drilling steeland wood (not reversible)
Drill concrete anchor holes, thru holes,piping and mechanical openings for
construction and repair work. Switches torotary drilling mode for steel and wood.
Air Model 2 2417 0010
SDS Max
Second handleposition
SAE #8 port forhydraulic hoseconnection SAE #8
oil port
ATEXATEX
Optional accessory for use with closed centerhydraulic power systems - adapts open centertools to closed center. [Part No. 38632]
• SDS chuck
• Safety clutch protects against overloading and jamming
• Hammer drill holes in concrete, brick and masonry
• Rotary drilling mode for straight drilling of steel and wood
• Open center hydraulic standard, closed center optional
WO
OD
BORI
NG
AIR
DRI
LLS
• 1-800-700-5919 • Visit our Web site at www.csunitec.com 61
Woodboring Air Drills, ReversibleHeavy-duty power for underwater drillingand other wood boring applications
• Ideal for drilling wood in marine timbers,underwater use and railroad repair work
• Thrust bearing support for long life andefficient operation
• Lever throttle and durable spur gearing
• Breast plate and dead handle included
• Includes threaded exhaust port
• Use underwater with Air Tool LineConditioner (shown below)
Capacity in WoodReversiblePowerChuck StyleSpindleFree SpeedRecommended Hose SizeOverall HeightWeightAir Inlet ThreadAir Exhaust ThreadAir Consumption at 90 PSIOptional Geared Drill Chuck
1" DiameterYes 2 HP
1/2" WoodboringStub Taper750 RPM
1/2"171/2"
141/2 lbs.1/2" ID
1/2" NPT39 CFM
Part no. DE-99C
2" DiameterYes3 HP
1/2" Woodboring#2 Morse Taper
700 RPM1/2"181/2"
243/4 lbs.1/2" ID
1/2" NPT50 CFM
Part no. IBC 22 (MT2)
3" DiameterYes3 HP
1/2" Woodboring#2 Morse Taper
380 RPM1/2"181/2"
243/4 lbs.1/2" ID
1/2" NPT50 CFM
Part no. IBC 22 (MT2)
Model 2 1924 0010 Model 2 1932 0010Model 2 1903 0010
Accessories and woodboringdrill bits from 1/2" dia. to 11/8"dia. in lengths from 12" to 36"
Air Tool Line Conditioner
Underwater air tool conditionerfor marine applications.Displaces moisture andinhibits rust/corrosion of airmotors.
MS 9105 – 1 quart/liter
• Removes moisture and dirtfrom air lines; a float valveautomatically ejects water and dirt
• Includes automatic oiler;prevents tools from freezing in cold environments
• Eliminates air motor downtime caused by water and dirt
• Connections for two tools; max. air flow 185 CFM
AirPac Extends life of pneumatic power tools
Model CSAP-2
Model 2 1903 0010with lever throttleUp to 1" for boring wood
Model 2 1924 0010with self-closing roll throttleUp to 2" for boring wood
PNEU
MA
TIC
AN
D H
YDRA
ULI
C N
UT
RUN
NER
S
• 1-800-700-5919 • Visit our Web site at www.csunitec.com62
Nut Runners - High TorquePneumatic and hydraulic: ideal for turning valves, tightening,
tapping, reaming, pipe beveling, expanding and more
Model numbers pictured above (listed from top to bottom): 6 1055 0075 (with male drive), 6 1055 0010 (female), 6 1014 0075 (with male drive)
6 1014 00106 1014 00756 1014 00996 1055 00106 1055 00756 1055 00996 1056 00106 1056 00756 1056 00996 1057 00106 1057 00756 1057 00996 1061 0010
3/4" F3/4" M1/2" M3/4" F3/4" M1/2" M3/4" F3/4" M1/2" M3/4" F3/4" M1/2" M7/8" F
SquareDrive
F=FemaleM=Male
100100100423423423141141141606060423
StallTorqueat 90 PSI(ft-lbs.)
10010010022222267676712512512522
LoadSpeed(RPM)
0.90.90.90.90.90.90.90.90.90.90.90.90.9
Power(HP)
42424245454542424246464645
CFM at90 PSI
22222221212121212121212121
Length(inches)
10111110101010111111111111
Weight(lbs.)
NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8NPT 3/8
AirConn-ection(inches)
1/21/21/21/2 1/21/21/21/21/21/21/21/21/2
HoseID
(inches)
1111111111111
Side toCenterDistance(inches)
18018018044444412012012026026026044
FreeSpeed(RPM)
PneumaticNut RunnerModel No.
1/2" or 3/4" 3/4" or 7/8" (7/8" pneumatic only)
Available with Male or FemaleSquare Drives, in a variety of sizes
Male Sq. Drive Head Female Sq. Drive Head
3 6242 0010*
3 6243 0010** Also available with 1/2" (3 6242 0099) and 3/4" (3 6242 0075) Male Square Drive
3/4" F3/4" F
SquareDrive
F=FemaleM=Male
554
223
StallTorqueat 90 PSI(ft-lbs.)
22
90
LoadSpeed(RPM)
1.6
1.6
Power(HP)
4 - 13
4 - 13
OilPressure(GPM)
OilFlow(GPM)
1
1
Length(inches)
20
20
Weight(lbs.)
22
22
Conn-ectionQuick
Couplers
1/2" FF1/2" FF
1000
1000
Side toCenterDistance(inches)
44
44
FreeSpeed(RPM)
HydraulicNut RunnerModel No.
Square Drive Accessories
6 1015 7030 3/4" Male Square Drive with retaining hole(included with model numbers 6 1014 0075,6 1055 0075 and 6 1056 0075)
6 1017 7940 3/4" Male Square Drive with retaining pin
3 6339 4910 1/2" Male Square Drive with retaining hole(included with model numbers 6 1014 0099,6 1055 0099 and 6 1056 0099)
6 1018 7940 1/2" Male Square Drive with retaining pin
• Worm gear drive provides high torque – up to 554 ft.-lbs.• Lightweight and reversible• Compact angle head allows access to confined spaces• Both pneumatic and hydraulic models available• One-year warranty
Model 6 1055 0075
ATEXATEX
• 1-800-700-5919 • Visit our Web site at www.csunitec.com
Custom DesignsAvailable
Drive Units - High TorquePneumatic and hydraulic: high torque and slow speed for specialdriving and tapping applications
2 2804 0010 1-1/8" F
SquareDrive
1327
StallTorqueat 90 PSI(ft-lbs.)
20
LoadSpeed(RPM)
5
Power(HP)
141
CFM at90 PSI
82
Weight(lbs.)
NPT 1"
Air Connection(inches)
1"
HoseID
(inches)
3.6
Side toCenterDistance(inches)
40
FreeSpeed(RPM)
PneumaticDrive UnitModel No.
2 2090 0010
2 2810 0010
3/4" F1-1/8" F
SquareDrive
376
1550
StallTorqueat 90 PSI(ft-lbs.)
20
12
LoadSpeed(RPM)
1.5
3.5
Power(HP)
4 - 13
4 - 13
OilPressure(PSI)
OilFlow(GPM)
2.2
3.6
Weight(lbs.)
28
77
ConnectionQuick Couplers
1/2" FF1/2" FF
1000
1000
Side toCenterDistance(inches)
40
24
FreeSpeed(RPM)
HydraulicDrive UnitModel No.
• Both pneumatic and hydraulicmodels available
• Integrated torque reactionstabilizers
• One-year warranty
Torquereactionstabilizers
Torquereactionstabilizers
Request our catalog:• Non-sparking Hand Tools
For use in ATEXand EX ZonesFor use in ATEXand EX Zones
• High-quality non-sparking and non-magnetic safety tools
• Aluminum Bronze (AlBr)or Copper Beryllium (CuBe) alloy
• Hammers, wrenches, sockets, wedges, chisels and more
• For ATEX and Ex zones where hazardous,flammable or combustible materials are present
Non-sparkingNon-magnetic
Also Available: Safety Tools
PNEU
MA
TIC
AN
D H
YDRA
ULI
C D
RIV
E U
NIT
S
63
CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email [email protected] • www.csunitec.com
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2012, CS Unitec, Inc., 07-12-4M
Also available from :CS Unitec, Inc. specializes in electric, pneumatic and hydraulic power tools for construction and industry.
Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company inventedthe first pneumatic portable band saw. CS Unitec has added to its list of industry firsts with the widestrange of portable magnetic drills and hand-held concrete core drills. The line also includes electric,pneumatic and hydraulic portable band saws, reciprocating saws, hack saws, nut runners, rotary hammerdrills, rolling motors, metal finishing tools, non-sparking safety tools, portable mixers, dust extraction toolsand vacuum systems.
… the power of innovation!®
Surface finishersfor sanding andpolishing steel
Angle grinders and flap discs for grinding,sanding and polishing, even in corners
Pipe sandersfor eliminatingweld seamsand polishingstainless steel
Electric, Pneumatic and Hydraulic ToolsElectric, Pneumatic and Hydraulic Tools
For more information, please visit our Web site at www.csunitec.com.
View product demonstrations at www.csunitec.com.
Polish In Corners!Polish In Corners!
Grind In Corners!Grind In Corners!