crosswalk for ccna 2 labs and activities.xls
DESCRIPTION
Crosswalk for CCNA 2 LabsTRANSCRIPT
What is this?This document outlines the course content for CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3) and details all labs and activities, including hands-on labs, Packet Tracer activities, media activities, simulations, games, NETLAB-friendly lab activities, and Supplemental PT Activities.
Why do I want this document?This document is intended to show instructors how each chapter's labs and activities integrate into the course content, and to assist instructors in planning how students can complete those activities within the time constraints of their course offering. An instructor might use this as a resource while creating weekly lesson plans. For example, an instructor will make decisions on when to provide direct instruction; and will plan when and where students will complete labs and activities both in class and outside of class.
How is this document structured?There is a worksheet for each chapter of this course which provides an outline of the chapter content and how the activities are placed within that content.
There are tabs for each course chapter. Each tab outlines the chapter and details all labs and activities. The details of each lab or activity include its page within the course, the type of activity, the learning objectives, and equipment needed to complete the lab.
How do I display specific types of activities for a chapter?Each column contains an AutoFilter dropdown list.• Selecting (NonBlanks) in the Activity/Lab column will display all of the labs and activities for that chapter.• Additional filters can be use to display only the Hands-on Labs, PT Activities, Media Activities, Linksys GUI activities, and E-Lab Activities.
What are the different types of Packet Tracer activities?There are three types of PT activities included in the course:• PT Activity: Skills Practice -- These e-doing activities guide students through a specific skillset, providing just-in-time skills reinforcement and practice.• PT Activity: Companion to Hands-on Lab -- These activities may be used in conjunction with hands-on labs.• PT Activity: Skills Integration Challenge -- These summary activities provide a skills integration challenge which build upon skills learned in this chapter and in previous chapters.• Supplemental PT Activities -- These activities complement the CCNA Discovery and CCNA Exploration curricula and utilize technologies new to PT with the release of PT5.0 including activities demonstrating OSPF, IPv6, SSH, RSTP, Spanning Tree, VLANs, and Frame Relay.
It is important to note that Packet Tracer was not designed to replace the use of physical equipment in a classroom. Packet Tracer is more than a network lab simulator, providing many other opportunities for instruction and learning.
CCNA Discovery Working at a Small-to-Medium Business or ISP and details all labs and activities, including hands-on labs, Packet Tracer activities, media activities,
This document is intended to show instructors how each chapter's labs and activities integrate into the course content, and to assist instructors in planning how students can complete those activities within the time constraints of their course offering. An instructor might use this as a resource while creating weekly lesson plans. For example, an instructor will make decisions on when to provide direct instruction; and will plan when and where students will complete labs and activities both
There is a worksheet for each chapter of this course which provides an outline of the chapter content and how the activities
There are tabs for each course chapter. Each tab outlines the chapter and details all labs and activities. The details of each lab or activity include its page within the course, the type of activity, the learning objectives, and equipment needed to
Selecting (NonBlanks) in the Activity/Lab column will display all of the labs and activities for that chapter.Additional filters can be use to display only the Hands-on Labs, PT Activities, Media Activities, Linksys GUI activities, and
PT Activity: Skills Practice -- These e-doing activities guide students through a specific skillset, providing just-in-time skills
PT Activity: Companion to Hands-on Lab -- These activities may be used in conjunction with hands-on labs.PT Activity: Skills Integration Challenge -- These summary activities provide a skills integration challenge which build upon
-- These activities complement the CCNA Discovery and CCNA Exploration curricula and utilize technologies new to PT with the release of PT5.0 including activities demonstrating OSPF, IPv6, SSH, RSTP,
It is important to note that Packet Tracer was not designed to replace the use of physical equipment in a classroom. Packet Tracer is more than a network lab simulator, providing many other opportunities for instruction and learning.
PT Activity PT files word files Objectives
IPV6 RIP.pka IPV6 RIP.doc
Configuring SSH.pka Configuring SSH.doc
Configuring RSTP.pka Configuring RSTP.doc
Configuring STP Configuring_STP.pka Configuring STP.doc
Supplemental PT 5.0 activities that complement the CCNA Discovery and CCNA Exploration curricula are available for download from the Packet Tracer resource page, including activities demonstrating OSPF, IPv6, SSH, RSTP, Spanning Tree, VLANs, and Frame Relay.
These supplemental activities can be downloaded from the Packet Tracer resource page on Academy Connection. To access this page, log in to Academy Connection and click the Packet Tracer graphic on the left of the page, then select the appropriate download package for your needs.
Troubleshooting OSPF Frame-Relay
OSPFFR_troubleshooting.pka
OSPFFR_troubleshooting.doc
• Use various tools and show commands to troubleshoot connectivity issues.
Configuring IPv6 RIP
• Enable IPv6 Unicast Routing. • Configure IPv6 addresses. • Enable RIPng on appropirate interfaces. • Verify the IPv6 configuration.
Configuring SSH
• View the default internetwork configuration. • Enable SSH. • Interconnect using SSH.
Configuring RSTP
• View the default Layer 2 configuration.• Enable RSTP. • Configure primary and secondary root bridges.
• View the default configuration of the spanning tree protocol. • Select and enable the root bridge. • Enable portfast on ports connected directly to host devices• View how these configurations change the way in which traffic is forwarded.
EtherChannel.pka EtherChannel.doc
Port Security.pka Port Security.doc
Configuring InterVlan Routing with Multilayer Switch
Configuring InterVLAN Routing.pka
Configuring InterVLAN Routing.doc
• View the default Layer 2 configuration. • Configure the switch virtual interfaces (SVIs). • Verify inter-VLAN routing.
Configuring Frame-Relay
Configuring Frame Relay.pka
Configuring Frame Relay.doc
• View the default internetwork configuration. • Configure Frame Relay connectivity. • Configure Static and Default routing.• Verify connectivity.
Configuring Etherchannel
• View the default Layer 2 configuration. • Configure EtherChannel.
Configuring Port Security
• View the default Layer 2 configuration. • Configure port security.
MultiUser_RIP_Configuration
MU_RIP_instructor.pktMU_RIP_Peer0.pktMU_RIP_Peer1.pktMU_RIP_Peer2.pktMU_RIP_Peer3.pktMU_RIP_Peer4.pktMU_RIP_Peer5.pkt
MU_ACL_Requirements.docMU_ACL_Solution.doc
Connections to CCNA Discovery Courses Connections to CCNA Exploration Courses
Supplemental PT 5.0 activities that complement the CCNA Discovery and CCNA Exploration curricula are available for download from the Packet Tracer resource page, including activities demonstrating OSPF, IPv6, SSH, RSTP, Spanning Tree, VLANs, and Frame Relay.
These supplemental activities can be downloaded from the Packet Tracer resource page on Academy Connection. To access this page, log in to Academy Connection and click the Packet Tracer graphic on the left of the page, then select the appropriate download package for your needs.
CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0.3.0)9.3.3 OSPF Issues
CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0)8.2.5 Troubleshooting Frame Relay Operation
CCNA Exploration: Routing Protocols and Concepts (E2 v4.0.4)11.6 OSPF Configuration Labs
CCNA Exploration: Accessing the WAN (E4 v4.0.2)3.4.3 Troubleshooting Frame Relay Configuration
CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0)6.3.3 Implementing IPv6 on a Cisco Device
CCNA Exploration: Accessing the WAN (E4 v4.0.2)7.3.9 Verifying and Troubleshooting RIPng
CCNA Discovery: Working at a Small-to-Medium Business or ISP (D2 v4.1.3.0)9.5.3 Using Telnet to Check Upper Layer Connectivity
CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2)2.4.3 Configure Telnet and SSH
CCNA Exploration: Accessing the WAN (E4 v4.0.2)4.2.4 Securing Remote Administrative Access to Routers
CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0)7.3.3 Validating Device and Topology Selection
CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2)5.4 PVST+, RSTP and Rapid-PVST+
CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0.3.0)3.2 Preventing Switching Loops
CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2)5.2.5 STP Port States and BPDU Timers
CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0.3.0)3.4.3 Inter-VLAN Routing
CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2)6.4.2 Challenge Inter-VLAN Routing
CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0)8.2.4 Prototyping the WAN
CCNA Exploration: Accessing the WAN (E4 v4.0.2)3.2 Configuring Frame Relay
CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2)5.1.3 Real-world Redundancy Issues
CCNA Discovery: Working at a Small-to-Medium Business or ISP (D2 v4.1.3.0)5.5.4 Connecting the LAN Switch to the Router
CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0.3.0)3.1.4 Switch Security
CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0)1.4.6 Security Measures
CCNA Exploration: LAN Switching and Wireless (E3 v4.0.2)2.4.6 Configuring Port Security
CCNA Discovery: Introducing Routing and Switching in the Enterprise (D3 v4.0.3.0)8.3.4 Configuring Numbered Extended ACLs
CCNA Discovery: Designing and Supporting Computer Networks (D4 v4.0.2.0)1.3.4 Traffic Filtering at the Distribution Layer
CCNA Exploration: Accessing the WAN (E4 v4.0.2)5.3.4 Configuring Extended ACLs
DsmbISP_v40_ActivityMap June 2007 page 7 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 1: The Internet and Its Uses
TLO: 1.0 Chapter IntroductionELO: 1.0.1 Introduction
TLO: 1.1 What is the Internet?ELO: 1.1.1 The Internet and StandardsELO: 1.1.2 ISP and ISP Services
1.1.2.2 Media Activity not applicable
TLO: 1.2 ISPsELO: 1.2.1 Delivering Internet Services to End UsersELO: 1.2.2 Internet HierarchyELO: 1.2.3 Using Tools to Map the Internet
1.2.3.3 Hands-on Lab
1.2.3.4
TLO: 1.3 ISP ConnectivityELO: 1.3.1 ISP Requirements
1.3.1.3
ELO: 1.3.2 Roles and Responsibilities within an ISP
ISP and ISP Services
Match the requirements of a end-user to various ISPs. After reading the scenario, place a check in the box that would be the most appropriate ISP for each user.
Mapping ISP Connectivity Using Traceroute
Lab 1.2.3 Mapping ISP Connectivity Using Traceroute
Use traceroute to check ISP connectivity through the Internet.• Run the Windows tracert utility from a local host computer to a website on a different continent.• Interpret the traceroute output to determine which ISPs the packets passed through on their way from the local host to the destination website.• Draw a diagram of the traceroute path, showing the routers and ISP clouds passed through from the local host to the destination website, including IP addresses for each device.
PT Activity: Skills Practice
Interpreting Ping and Traceroute Output
Interpret the output of ping and traceroute.• Distinguish the difference between successful and unsuccessful ping attempts. • Distinguish the difference between successful and unsuccessful traceroute attempts.
PT Activity: Skills Practice
Identifying Equipment to Meet Customer Requirements
1.3.1.3_printable-instructions.pdf
Identify appropriate equipment to meet the business needs of ISP customers.• Select the appropriate interface cards for the needs and budget of an organization.• Compare the trade-off between cost and flexibility.• Add new equipment to accommodate expansion and allow for future growth.
DsmbISP_v40_ActivityMap June 2007 page 8 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
1.3.2.3 Media Activity not applicable
TLO: 1.4 Chapter SummaryELO: 1.4.1 Summary
TLO: 1.5 Chapter QuizELO: 1.5.1 Quiz
Roles and Responsibilities within an ISP
Match the ISP role to its responsibility. Drag the role to its defined description.
DsmbISP_v40_ActivityMap June 2007 page 9 of 55
Equipment Needed
• Host computer with the Windows operating system• Access to the command prompt• Internet connection• Routes Traced worksheet for each destination URL. The worksheet is attached to this lab. Each student completes their own worksheets and gives them to the instructor.• Global Connectivity Map, which is attached at the end of this lab• Access to the PC command prompt
DsmbISP_v40_ActivityMap June 2007 page 10 of 55
Equipment Needed
DsmbISP_v40_ActivityMap June 2007 page 11 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives Equipment Needed
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 2: Help Desk
TLO: 2.0 Chapter IntroductionELO: 2.0.1 Introduction
TLO: 2.1 Help Desk TechniciansELO: 2.1.1 ISP Help Desk OrganizationELO: 2.1.2 Roles of ISP Technicians
2.1.2.3 Media Activity not applicable
ELO: 2.1.3 Interacting with Customers
2.1.3.4 Media Activity not applicable
TLO: 2.2 OSI ModelELO: 2.2.1 Using the OSI ModelELO: 2.2.2 OSI Model Protocols and Technologies
2.2.2.4 Media Activity not applicable
ELO: 2.2.3 Troubleshooting the OSI Model
2.2.3.5 Media Activity not applicable
TLO: 2.3 ISP TroubleshootingELO: 2.3.1 Help Desk Troubleshooting Scenarios
2.3.1.4 not applicable
ELO: 2.3.2 Creating and Using Help Desk RecordsELO: 2.3.3 Customer Site Procedures
TLO: 2.4 Chapter SummaryELO: 2.4.1 Summary
TLO: 2.5 Chapter QuizELO: 2.5.1 Quiz
Roles of ISP Technicians
Identify the responsibilities of each level of network technician. For each task, select the appropriate technician.
Interacting with Customers
Examine each statement and decide to which part of the customer support process it belongs. For each statement, select the appropriate item.
OSI Model Protocols and Technologies
Identify the layer to which the protocol or technology belongs. For each Protocol or Technology displayed, click the appropriate layer.
Troubleshooting the OSI Model
Identify if a network issue occurs at Layer 1, Layer 2, Layer 3, Layer 4, or Layers 5-7. Based on the scenario, check the appropriate Layer.
PT Activity: Skills Practice
Troubleshooting and Resolving Network Issues
Troubleshoot and resolve a network connectivity issue.• Diagnose a network connectivity issue. • Implement a proposed solution to restore network connectivity.
DsmbISP_v40_ActivityMap June 2007 page 12 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives Equipment Needed
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 3: Planning a Network Upgrade
TLO: 3.0 Chapter IntroductionELO: 3.0.1 Introduction
TLO: 3.1 Documenting the Existing NetworkELO: 3.1.1 Site SurveyELO: 3.1.2 Physical and Logical TopologiesELO: 3.1.3 Network Requirements Documentation
3.1.3.2
TLO: 3.2 PlanningELO: 3.2.1 Network Upgrade Planning Phases
3.2.1.4 Media Activity not applicable
ELO: 3.2.2 Physical EnvironmentELO: 3.2.3 Cabling ConsiderationsELO: 3.2.4 Structured Cable
3.2.4.2 Hands-on Lab
TLO: 3.3 Purchasing and Maintaining EquipmentELO: 3.3.1 Purchasing EquipmentELO: 3.3.2 Selecting Network DevicesELO: 3.3.3 Selecting LAN Devices
3.3.3.4 not applicable
ELO: 3.3.4 Selecting Internetworking Devices
3.3.4.3 not applicable
ELO: 3.3.5 Network Equipment Upgrades
PT Activity: Skills Practice
Creating Network Diagrams
3.1.3.2_printable-instructions.pdf
Create a logical and physical network diagram.• Investigate the customer network.• Create a network inventory list.• Create a logical topology diagram.
Network Upgrade Planning Phases
Determine if an action is part of the Requirements Gathering, Selection and Design, Implementation, Operation, or Review and Evaluation phase. Based on the statement, select appropriate phase.
Evaluating a Cabling Upgrade Plan
Lab 3.2.4.2 Evaluating a Cabling Upgrade Plan
Evaluate a floor plan and propose upgrades to accommodate extra floor space.• Examine the existing floor plan of a customer.• Propose a cable upgrade plan to accommodate extra floor space.
Existing Floor Plan (provided in lab)
PT Activity: Skills Practice
Exploring Different LAN Switch Options
Explore different LAN switch options.• Determine the cable types to use to connect all devices to the switch. • Add appropriate modules to switches and routers. • Connect the devices to the switch using the appropriate cable types.
PT Activity: Skills Practice
Exploring Internetworking Devices
Explore different internetworking device options.• Describe the different options available on an ISR and a router. • Determine which options provide the needed connectivity.• Add the correct modules and interfaces to the ISR and the router, and interconnect the devices.
DsmbISP_v40_ActivityMap June 2007 page 13 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives Equipment Needed
ELO: 3.3.6 Design ConsiderationsTLO: 3.4 Chapter Summary
ELO: 3.4.1 SummaryTLO: 3.5 Chapter Quiz
ELO: 3.5.1 Quiz
DsmbISP_v40_ActivityMap June 2007 page 14 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives Equipment Needed
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 4: Planning the Addressing Structure
TLO: 4.0 Chapter IntroductionELO: 4.0.1 Introduction
TLO: 4.1 IP Addressing in the LANELO: 4.1.1 Review of IP AddressesELO: 4.1.2 Subnetting a NetworkELO: 4.1.3 Custom Subnet Masks
4.1.3.4 Media Activity not applicable
4.1.3.5 not applicable
ELO: 4.1.4 VLSM and Classless Inter-Domain Routing (CIDR)ELO: 4.1.5 Communicating Between Subnets
4.1.5.2 not applicable
4.1.5.3 Hands-on Lab Create an IP addressing scheme for a small network. Pencil and paper
TLO: 4.2 NAT and PATELO: 4.2.1 Basic Network Address Translation (NAT)ELO: 4.2.2 IP NAT Terms
4.2.2.2 Media Activity IP NAT Terms not applicable
ELO: 4.2.3 Static and Dynamic NAT
4.2.3.3 not applicable
ELO: 4.2.4 Port-based Network Address Translation (PAT)
Custom Subnet Masks
Determine the network ID of each IP address. Enter the binary and decimal values of each octet in the spaces provided.
PT Activity: Skills Practice
Implementing an IP Addressing Scheme
Subnet a network to meet the requirements of multiple LANs.• Subnet an address space based on host requirements. • Assign host addresses to devices. • Configure devices with IP addressing. • Verify the addressing configuration.
PT Activity: Companion to Hands-on Lab
Communicating Between Subnets
Modify the addresses, subnet masks and device default gateways to enable routing between subnets. Describe how hosts on separate subnets communicate to share resources.
Subnetting a Network
Lab 4.1.5 Subnetting a Network
Match the NAT address terminology to the source and destination of the datagram. Drag and drop the Inside and Outside options to the correct Address Type.
PT Activity: Skills Practice
Examining Network Address Translation (NAT)
Examine the contents of the IP header as traffic crosses the NAT border.
DsmbISP_v40_ActivityMap June 2007 page 15 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives Equipment Needed
4.2.4.3 Hands-on Lab
ELO: 4.2.5 IP NAT IssuesTLO: 4.3 Chapter Summary
ELO: 4.3.1 SummaryTLO: 4.4 Chapter Quiz
ELO: 4.4.1 Quiz
Determining PAT Translations
Lab 4.2.4 Determining PAT Translations
Determine the number of port address translations being performed.• Explain the active network connections open on a computer when viewing a particular web page.• Determine what an internal IP address and port number are translated to using port address translation (PAT).
• Computer running Windows XP Professional• Connection to a gateway router or an ISR using PAT• Internet connection• Access to the PC command prompt.
DsmbISP_v40_ActivityMap June 2007 page 16 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 5: Configuring Network Devices
TLO: 5.0 Chapter IntroductionELO: 5.0.1 Introduction
TLO: 5.1 Initial ISR Router ConfigurationELO: 5.1.1 ISRELO: 5.1.2 Physical Setup of the ISRELO: 5.1.3 Bootup Process
5.1.3.5 Hands-on Lab
ELO: 5.1.4 Cisco IOS Programs
5.1.4.5 Media Activity not applicable
TLO: 5.2 Using Cisco SDM Express and SDMELO: 5.2.1 Cisco SDM ExpressELO: 5.2.2 SDM Express Configuration Options
5.2.2.5 Media Activity not applicable
ELO: 5.2.3 Configuring WAN Connections Using SDM Express
5.2.3.3 Hands-on Lab
ELO: 5.2.4 Configuring NAT Using Cisco SDM
Powering Up an Integrated Services Router
Lab 5.1.3 Powering Up an Integrated Services Router
Power up an ISR and view the router system and configuration files using show commands. • Set up a new Cisco 1841 Integrated Services Router (ISR).• Connect a computer to the router console interface.• Configure HyperTerminal so that the computer can communicate with the router and observe the router startup sequence.• Display router configuration information using the show running-config and show startup-config commands and restart the router using the reload command.• Display router system, Cisco IOS software and configuration register information using the show version command.
Cisco IOS Programs
Determine when to use CLI or SDM. Based on the description, check CLI or SDM.
SDM Express Configuration Options
Identify the configuration parameters from the SDM Express. Drag the Configuration Parameter to the information that must be entered.
Configuring an ISR with SDM Express
Lab 5.2.3 Configuring an ISR with SDM Express
Configure an ISR using Cisco SDM Express • Configure basic router global settings – router name, users, and login passwords – using Cisco SDM Express.• Configure LAN and Internet connections on a Cisco ISR using Cisco SDM Express.
DsmbISP_v40_ActivityMap June 2007 page 17 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
5.2.4.2 Hands-on Lab
TLO: 5.3 Configuring a Router Using IOS CLIELO: 5.3.1 Command Line Interface Modes
5.3.1.3 E-Lab Activity not applicable Using the Cisco CLI explore the various configuration modes.
ELO: 5.3.2 Using the Cisco IOS CLI
5.3.2.4 Media Activity not applicable
5.3.2.5 not applicable
ELO: 5.3.3 Using Show Commands
5.3.3.2 E-Lab Activity not applicable
5.3.3.3 not applicable
Configuring Dynamic NAT with SDM
Lab 5.2.4 Configuring Dynamic NAT with SDM
Configure Dynamic NAT using the Cisco SDM basic NAT wizard.• Configure Network Address Translation (NAT) using Port Address Translation (PAT) on a Cisco ISR router with the Cisco SDM Basic NAT Wizard.
Entering Command Modes
Using the Cisco IOS CLI
Match the commands to their function. Drag the correct keystroke combination to the proper definition.
PT Activity: Skills Practice
Exploring the Cisco IOS CLI
Explore the features of the Cisco IOS CLI.• Use the Cisco IOS CLI context-sensitive Help feature.• Explore command shortcuts.• Learn about error detection features.• Use command history.
Viewing the Router Interface Information
Use the show run and show interface commands to answer questions about the router configuration.
PT Activity: Skills Practice
Using the Cisco IOS Show Commands
Use Cisco IOS show commands on a router located at the ISP.
DsmbISP_v40_ActivityMap June 2007 page 18 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
ELO: 5.3.4 Basic Configuration
5.3.4.4 not applicable
ELO: 5.3.5 Configuring An Interface
5.3.5.3 E-Lab Activity not applicable Configure the serial interfaces on two routers.
5.3.5.4 not applicable
5.3.5.5 Hands-on Lab
ELO: 5.3.6 Configure a Default Route
5.3.6.2 not applicable
ELO: 5.3.7 Configuring DHCP Services
5.3.7.2 not applicable
PT Activity: Skills Practice
Performing an Initial Router Configuration
Use Cisco IOS CLI to perform an initial router configuration.• Configure the router host name. • Configure passwords. • Configure banner messages. • Verify the router configuration.
Configuring a Serial Interface on Routers for Communication
PT Activity: Skills Practice
Configuring Ethernet and Serial Interfaces
Configure the Ethernet and Serial interfaces of a router. • Configure a LAN Ethernet interface. • Configure a WAN serial interface. • Verify the interface configurations.
Configuring Basic Router Settings with the Cisco IOS CLI
Lab 5.3.5 Configuring Basic Router Settings with the Cisco IOS CLI
Configure basic settings on a router using the Cisco IOS CLI.• Configure the device host name for a router.• Configure console, privileged EXEC mode, and vty passwords.• Configure Ethernet and serial interfaces, including description.• Configure a message of the day (MOTD) banner.• Configure the routers to not perform domain lookup of host names.• Configure synchronous console logging.• Verify connectivity between hosts and routers.
PT Activity: Skills Practice
Configuring a Default Route
Configure a default route on routers in a medium-sized business network topology.
PT Activity: Skills Practice
Configuring a Cisco Router as a DHCP Server
Configure a router as a DHCP server for attached clients. • Configure the customer Cisco 1841 ISR as a DHCP server.
DsmbISP_v40_ActivityMap June 2007 page 19 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
5.3.7.3 Hands-on Lab
ELO: 5.3.8 Configuring Static NAT Using Cisco IOS CLI
5.3.8.3 not applicable
5.3.8.4 Hands-on Lab
ELO: 5.3.9 Backing Up a Cisco Router Configuration
5.3.9.3 not applicable
Configuring DHCP with SDM and the other Cisco IOS CLI
Lab 5.3.7 Configuring DHCP with SDM and the other Cisco IOS CLI
Use the Cisco SDM and IOS CLI to configure a router as a DHCP server.• Configure a customer router for DHCP using SDM.• Configure a customer router for DHCP using the Cisco IOS CLI.• Configure a DHCP client.• Verify DHCP functionality.
PT Activity: Skills Practice
Configuring Static NAT on a Cisco Router
Configure static NAT on a router.• Configure the customer Cisco 1841 ISR to use NAT. • Verify the configuration.
Configuring PAT with SDM and Static NAT using Cisco IOS Commands
Lab 5.3.8 Configuring PAT with SDM and Static NAT using Cisco IOS Commands
Configure PAT using Cisco SDM and static NAT using Cisco IOS CLI.• Configure basic router settings using the Cisco IOS CLI.• Configure NAT Port Address Translation (PAT) with the Cisco SDM Basic NAT wizard.• Verify NAT translations using Cisco IOS commands.• Configure and verify static NAT using Cisco IOS commands.
PT Activity: Skills Practice
Backing Up a Cisco Router Configuration to a TFTP Server
Back up the running configuration to a TFTP server.• Save the current running configuration to the startup configuration.• Back up the configuration to a TFTP server.
DsmbISP_v40_ActivityMap June 2007 page 20 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
5.3.9.4 Hands-on Lab
5.3.9.5 Hands-on Lab
Managing Router Configuration Files Using HyperTerminal
Lab 5.3.9a Managing Router Configuration Files Using HyperTerminal
Use HyperTerminal to save and load the running configuration.• Establish a HyperTerminal session with a router, and use it to capture and save the running configuration as a text file for use as a backup.• Edit the file using the Notepad text editor, and use HyperTerminal to restore the backup configuration to the router.• Modify the file using Notepad, and use HyperTerminal to transfer the file and configure a different router.• Verify network connectivity.
Managing Router Configuration Files Using TFTP
Lab 5.3.9b Managing Router Configuration Files Using TFTP
Use TFTP to save and load the running configuration. • Download and install TFTP server software.• Use TFTP to copy the router running configuration from a router to the TFTP server.• Edit the file using the Notepad text editor, and copy the new configuration from the TFTP server to the router.
DsmbISP_v40_ActivityMap June 2007 page 21 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
TLO: 5.4 Connecting the CPE to the ISPELO: 5.4.1 Installing the CPEELO: 5.4.2 Customer Connections over a WANELO: 5.4.3 Choosing a WAN Connection
5.4.3.3 Hands-on Lab
ELO: 5.4.4 Configuring WAN Connections
5.4.4.2 not applicable
Planning a WAN Upgrade
Lab 5.4.3 Planning a WAN Upgrade
Complete a WAN upgrade plan based on the business scenario presented. • Create a business proposal based on a scenario of an organization that requires a WAN upgrade.
PT Activity: Skills Practice
Configuring a PPP Connection Between a Customer and an ISP
Configure a serial WAN connection from a Cisco ISR to a CSU/DSU at an ISP.• Configure PPP as the encapsulation type on a serial interface.• Verify the PPP configuration.
DsmbISP_v40_ActivityMap June 2007 page 22 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
TLO: 5.5 Initial Cisco 2960 Switch ConfigurationELO: 5.5.1 Standalone SwitchesELO: 5.5.2 Power Up the Cisco 2960 Switch
5.5.2.2 Hands-on Lab
ELO: 5.5.3 Initial Switch Configuration
5.5.3.3 E-Lab Activity not applicable Configure the basic settings on a Cisco Catalyst switch.
5.5.3.4 not applicable
ELO: 5.5.4 Connecting the LAN Switch to the Router
5.5.4.4 not applicable
5.5.4.5 Hands-on Lab
ELO: 5.5.5 Cisco Discovery Protocol
5.5.5.2 not applicable
TLO: 5.6 Chapter SummaryELO: 5.6.1 Summary
TLO: 5.7 Chapter QuizELO: 5.7.1 Quiz
Powering Up a Switch
Lab 5.5.2 Powering Up a Switch
Power up a Cisco 2960 switch.• Set up a new Cisco LAN switch.• Connect a computer to the router console interface.• Configure HyperTerminal so that the computer can communicate with the router.
Configuring a Cisco 2960 Switch
PT Activity: Skills Practice
Performing an Initial Switch Configuration
Perform a basic switch configuration.• Perform an initial configuration of a Cisco Catalyst 2960 switch.
PT Activity: Skills Practice
Connecting a Switch
Configure and connect the switch to the LAN using a configuration checklist.• Connect a switch to the network. • Verify the configuration on the switch.
Configuring the Cisco 2960 Switch
Lab 5.5.4 Configuring the Cisco 2960 Switch
Configure and connect the Cisco 2960 switch.• Configure initial switch global settings.• Configure host PCs and attach them to the switch.• Configure a router and attach it to the switch.• Configure a switch management VLAN IP address.• Verify network connectivity.• Configure basic port security.• Configure port duplex and speed settings.
PT Activity: Skills Practice
Using CDP as a Network Discovery Tool
Use the CDP show commands to discover information about devices in the network.• Examine CDP show commands.• Examine CDP configuration commands.
DsmbISP_v40_ActivityMap June 2007 page 23 of 55
Equipment Needed
Lab not supported
Supported by NETLAB
• Cisco 1841 ISR or other comparable router• Power cable• Windows PC with terminal emulation program• RJ45-to-DB9 connector console cable
• Cisco 1841 ISR router with SDM version 2.4 installed• Cisco 1841 ISR router configured with factory default settings and with a serial port add-in module • (Optional) Other Cisco router model with SDM installed• Windows XP computer with Internet Explorer 5.5 or higher and SUN Java Runtime Environment (JRE) version 1.4.2_05 or later (or Java Virtual Machine (JVM) 5.0.0.3810).• Straight-through or crossover category 5 Ethernet cable• Access to PC network TCP/IP configuration
CRP or BRPv2 podSDM is needed.
DsmbISP_v40_ActivityMap June 2007 page 24 of 55
Equipment Needed Supported by NETLAB
• Cisco 1841 ISR router with SDM version 2.4 or later installed and with basic configuration completed• (Optional) Other Cisco router model with SDM installed• Windows XP computer with Internet Explorer 5.5 or later and Sun Java Runtime Environment (JRE) version 1.4.2_05 or later (or Java Virtual Machine (JVM) 5.0.0.3810)• Straight-through or crossover Category 5 Ethernet cable• Access to PC network TCP/IP configuration
CRP or BRPv2 podSDM is needed.
DsmbISP_v40_ActivityMap June 2007 page 25 of 55
Equipment Needed Supported by NETLAB
CRP or BRPv2 pod
• Two routers, each with an Ethernet and serial interface. These should be non-SDM routers, if possible, because the required SDM startup configuration is deleted when the startup-config is erased.• Two Windows XP computers with HyperTerminal installed• Two straight-through Category 5 Ethernet cables (H1 to S1 and S1 to R2)• Crossover Category 5 Ethernet cable (H2 to R2)• Null serial cable (R1 to R2)• Console cables (H1 ro R1 and H2 to R2)• Access to the host H1 and H2 command prompt• Access to the host H1 and H2 network TCP/IP configuration
DsmbISP_v40_ActivityMap June 2007 page 26 of 55
Equipment Needed Supported by NETLAB
CRP or BRPv2 pod
CRP or BRPv2 pod
• Cisco 1841 ISR router (or comparable) with SDM version 2.4 or above installed to act as the customer router• Cisco 1841 router (or other router) to act as the ISP router• Cisco 2960 switch (or other switch/hub) to connect hosts H1, H2, and the customer router• Windows XP computer (host H1) with Internet Explorer 5.5 or later and Sun Java Runtime Environment (JRE) version 1.4.2_05 or later (or Java Virtual Machine (JVM) 5.0.0.3810)• Windows XP computer (host H2)• Straight-through Category 5 Ethernet cables• Null serial cable (R1 to R2)• Console cables (H1 to R1 and H2 to R2)• Access to the host H1 and H2 command prompt• Access to the host H1 and H2 network TCP/IP configuration
• Cisco 1841 ISR router (or comparable) with SDM version 2.4 or later installed to act as the customer router• Cisco 1841 router (or other router) to act as the ISP router• Cisco 2960 switch (or other switch/hub) to connect hosts H1, H2, and the customer router• Windows XP computer (host H1) with Internet Explorer 5.5 or higher and Sun Java Runtime Environment (JRE) version 1.4.2_05 or later (or Java Virtual Machine (JVM) 5.0.0.3810)• Windows XP computer (host H2)• Straight-through Category 5 Ethernet cables• Null serial cable (R1 to R2)• Console cables (H1 to R1 and H2 to R2)• Access to the host H1 and H2 command prompt• Access to the host H1 and H2 network TCP/IP configuration
DsmbISP_v40_ActivityMap June 2007 page 27 of 55
Equipment Needed Supported by NETLAB
Lab not supported
• Two routers, each with an Ethernet and serial interface• Two Windows XP computers• Straight-through Category 5 Ethernet cable (H1 to switch)• Crossover Category 5 Ethernet cable (H2 to router R2)• Null serial cable• Console cables (from H1 and H2 to routers R1 and R2)• Access to the computer host command prompt• Access to the computer host network TCP/IP configuration
• One router with an Ethernet interface• One Windows XP computer (or optional Discovery Server)• Crossover Category 5 Ethernet cable (H1 to router R1)• Console cable (from H1 to R1)• Access to the computer host command prompt• Access to the computer host network TCP/IP configuration
CRP or BRPv2 podTFTP Server is needed.
DsmbISP_v40_ActivityMap June 2007 page 28 of 55
Equipment Needed Supported by NETLAB
Pencil and paper No equipment is needed
DsmbISP_v40_ActivityMap June 2007 page 29 of 55
Equipment Needed Supported by NETLAB
Lab not supported
LSP or BSP pod
• Cisco 2960 or other comparable switch• Power cable• Windows PC with terminal emulation program• Console cable
• Cisco 2960 switch or other comparable switch• Router with Ethernet interface to connect to switch• Three Windows-based PCs, one with a terminal emulation program• RJ-45-to-DB-9 connector console cable• Three straight-through Ethernet cables• Access to the PC command prompt• Access to a PC network TCP/IP configuration
DsmbISP_v40_ActivityMap June 2007 page 30 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 6: Routing
TLO: 6.0 Chapter IntroductionELO: 6.0.1 Introduction
TLO: 6.1 Enabling Routing ProtocolsELO: 6.1.1 Routing Basics
6.1.1.5 not applicable
ELO: 6.1.2 Routing Protocols
6.1.2.4 Media Activity Routing Protocols not applicable
6.1.2.5 Hands-on Lab
ELO: 6.1.3 Common Interior Routing ProtocolsELO: 6.1.4 Routing Within An OrganizationELO: 6.1.5 Configuring and Verifying RIP
6.1.5.3 Configuring RIP not applicable
PT Activity: Skills Practice
Configuring Static and Default Routes
Manually configure and reconfigure static routes. • Configure static routes on each of the routers to allow all communication between all clients. • Test connectivity to ensure that each device can fully communicate with all other devices.
For each router, select the shortest path, based on the number of hops, to the destination Ethernet networks. Click each router to complete the routing table entries. To indicate a directly connected network, specify the exit interface. To indicate non-directly connected networks, specify the Next Hop Router. To proceed to another router, first click Check, then click the new router.
Creating a Network Diagram from Routing Tables
Lab 6.1.2 Creating a Network Diagram from Routing Tables
Create a network topology diagram based on the output of the show ip route command.• Interpret router outputs.• Identify networks and IP addresses for each router.• Draw a diagram of the network topology.• Reflect upon and document the network implementation.
PT Activity: Companion to Hands-on Lab
Configure and verify RIP. • Configure routers using basic interface configuration commands.• Enable RIP.• Verify the RIP configuration.
DsmbISP_v40_ActivityMap June 2007 page 31 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
6.1.5.4 Hands-on Lab Configuring and Verifying RIP
Lab 6.1.5 Configure and Verify RIP
Configure and verify RIP. • Implement RIP routing and verify that network routes are being exchanged dynamically.
DsmbISP_v40_ActivityMap June 2007 page 32 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
TLO: 6.2 Exterior Routing ProtocolsELO: 6.2.1 Autonomous Systems
6.2.1.3 Media Activity not applicable
ELO: 6.2.2 Routing Across the InternetELO: 6.2.3 Exterior Routing Protocols and the ISPELO: 6.2.4 Configuring and Verifying BGP
6.2.4.2 Hands-on Lab
TLO: 6.3 Chapter SummaryELO: 6.3.1 Summary
TLO: 6.4 Chapter QuizELO: 6.4.1 Quiz
Autonomous Systems
Identify which networks require shared or private AS numbers. For each scenario, select either shared or private.
Configuring BGP with Default Routing
Lab 6.2.5 Configuring BGP with Default Routing
Configure BGP on the external gateway router.• Configure the customer router with an internal network that will be advertised by ISP1 via Border Gateway Protocol (BGP).• Configure BGP to exchange routing information between ISP1 in AS 100 and ISP2 and AS 200.
DsmbISP_v40_ActivityMap June 2007 page 33 of 55
Equipment Needed
paper and pencil
DsmbISP_v40_ActivityMap June 2007 page 34 of 55
Equipment Needed
• Two routers, each with an Ethernet and serial interface. These should be non-SDM routers, if possible, because the required SDM startup configuration is deleted when the startup-config is erased.• Two Windows XP computers• Two straight-through Category 5 Ethernet cables (H1 to switch and switch to R1)• Crossover Category 5 Ethernet cable (H2 to router R2)• Null serial cable• Console cables (from H1 and H2 to routers R1 and R2)• Access to the H1 and H2 command prompt• Access to the H1 and H2 network TCP/IP configuration
DsmbISP_v40_ActivityMap June 2007 page 35 of 55
Equipment Needed
• Customer router (1841 or other)• Switch (optional if crossover cable is used between PC and customer router)• 2 ISP routers (1841 or other routers that support BGP)• Windows XP computer with terminal emulation program installed• Two straight-through Category 5 Ethernet cables (H1 to switch and switch to R1)• Two null serial cables• Console cable to configure routers• Access to host H1 command prompt• Access to host H1 network TCP/IP configuration
DsmbISP_v40_ActivityMap June 2007 page 36 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 7: ISP Services
TLO: 7.0 Chapter IntroductionELO: 7.0.1 Introduction
TLO: 7.1 Introducing ISP ServicesELO: 7.1.1 Customer RequirementsELO: 7.1.2 Reliability and Availability
TLO: 7.2 Protocols That Support ISP ServicesELO: 7.2.1 Review of TCP/IP ProtocolsELO: 7.2.2 Transport Layer ProtocolsELO: 7.2.3 Differences Between TCP and UDP
7.2.3.3 Media Activity not applicable
ELO: 7.2.4 Supporting Multiple ServicesTLO: 7.3 Domain Name System
ELO: 7.3.1 TCP/IP Host Name
7.3.1.3 Hands-on Lab
ELO: 7.3.2 DNS HierarchyELO: 7.3.3 DNS Name Resolution
7.3.3.2 Hands-on Lab
7.3.3.5 Hands-on Lab
ELO: 7.3.4 Implementing DNS SolutionsTLO: 7.4 Services and Protocols
ELO: 7.4.1 Services
7.4.1.2 Media Activity Services not applicable
ELO: 7.4.2 HTTP and HTTPS
7.4.2.5 Media Activity HTTP and HTTPS not applicable
ELO: 7.4.3 FTP
Differences Between TCP and UDP
Identify the characteristics and protocols of TCP and UDP. Drag the option to either TCP or UDP.
Editing the HOSTS File in Windows
Lab 7.3.1 Editing the HOSTS File in Windows
Set up name resolution using the HOSTS file. • Edit the local HOSTS file on a Windows PC to map a name to an IP address for easier identification.
Examining Cached DNS Information on a DNS Server
Lab 7.3.3.a Examining Cached DNS Information on a Windows DNS Server
Examine the interface of a Windows DNS server to view the cached DNS information from a DNS lookup. • View the cached DNS information on a Windows DNS server after making a DNS request that is looked up.
Creating Primary and Secondary Forward Lookup Zones
Lab 7.3.3.b Creating Primary and Secondary Forward Lookup Zones
Using a Windows server, create primary and secondary DNS zones. • Create primary and secondary forward lookup zones on Windows DNS servers.
Identify protocols that are required for each server type. Drag protocol to the correct server type.
Identify the characteristics of HTTP and HTTPS. Drag the characteristics to the correct protocol.
DsmbISP_v40_ActivityMap June 2007 page 37 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
ELO: 7.4.4 SMTP, POP3, and IMAP4
DsmbISP_v40_ActivityMap June 2007 page 38 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
TLO: 7.5 Chapter SummaryELO: 7.5.1 Summary
TLO: 7.6 Chapter QuizELO: 7.6.1 Quiz
DsmbISP_v40_ActivityMap June 2007 page 39 of 55
Equipment Needed
• PC running Windows XP• Administrator privileges on the PC
•Windows 2003 Server with DNS running• Administrative access to server• Internet connectivity
• Two Windows 2003 Servers with DNS running• Administrative access to servers• Internet connectivity
DsmbISP_v40_ActivityMap June 2007 page 40 of 55
Equipment Needed
DsmbISP_v40_ActivityMap June 2007 page 41 of 55
Equipment Needed
DsmbISP_v40_ActivityMap June 2007 page 42 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 8: ISP Responsibility
TLO: 8.0 Chapter IntroductionELO: 8.0.1 Introduction
TLO: 8.1 ISP Security ConsiderationsELO: 8.1.1 ISP Security ServicesELO: 8.1.2 Security PracticesELO: 8.1.3 Data Encryption
8.1.3.3 Hands-on Lab
TLO: 8.2 Security ToolsELO: 8.2.1 Access Control Lists and Port Filtering
8.2.1.3 Hands-on Lab
ELO: 8.2.2 Firewalls
8.2.2.3 not applicable
ELO: 8.2.3 IDS and IPS
8.2.3.4 Media Activity IDS and IPS not applicable
ELO: 8.2.4 Wireless Security
8.2.4.3 not applicable
ELO: 8.2.5 Host Security
8.2.5.4 Hands-on Lab
Securing Local Data and Transmitted Data
Lab 8.1.3 Securing Local Data and Transmitted Data
Perform the data security tasks need to analyze and secure local data and transmitted data. • Use Windows New Technology Files System (NTFS) permissions to secure local data on a Windows XP Professional edition computer.• Use Internet Explorer 7 to access secure web sites.
Planning for Access Lists and Port Filters
Lab 8.2.1 Planning for Access Lists and Port Filters
Determine where to implement ACLs and port filters to help protect the network.• Based on the predefined network diagram, determine where to implement access lists and port filters to help protect the network.
PT Activity: Skills Practice
Planning Network-based Firewalls
• Place firewalls in appropriate locations to satisfy security requirements.
Identify characteristics and features of IPS and IDS. Click each statement(s) that applies.
PT Activity: Skills Practice
Configuring WEP on a Wireless Router
• Configure WEP security between a workstation and a Linksys wireless router.
Researching an Anti-X Software Product
Lab 8.2.5 Researching an Anti-X Software Product
Recommend an anti-X software package for a small business.• Research an Anti-X software package that meets the requirements for a small business.
DsmbISP_v40_ActivityMap June 2007 page 43 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
TLO: 8.3 Monitoring and Managing the ISPELO: 8.3.1 Service Level Agreements
8.3.1.2 Hands-on Lab
ELO: 8.3.2 Monitoring Network Link Performance
8.3.2.2 Hands-on Lab
ELO: 8.3.3 Device Management Using In-band Tools
8.3.3.2 Hands-on Lab
Interpreting a Service Level Agreement
Lab 8.3.1 Interpreting a Service Level Agreement
Examine an SLA and practice interpreting the sections of the SLA.• Describe the purpose of a Service Level Agreement (SLA).• Review general customer SLA requirements.• Analyze a sample SLA and answer questions regarding content and suitability based on customer needs.
Conducting a Network Capture with Wireshark
Lab 8.3.2 Conducting a Network Capture with Wireshark
Download, install, and then conduct a network capture with Wireshark.• Perform a network traffic capture with Wireshark to become familiar with the Wireshark interface and environment.• Analyze traffic to a web server.• Create a filter to limit the network capture to ICMP packets.• Ping a remote host to observe how the ICMP packet filter operates during the network capture.
Managing Remote Network Devices with Telnet
Lab 8.3.3a Managing Remote Network Devices with Telnet
Use Telnet to manage remote network devices.• Establish a Telnet connection to a remote router.• Verify that the Application Layer between the source and destination is working properly.• Retrieve information about remote routers using show commands.• Retrieve CDP information from routers not directly connected.• Suspend and reestablish a Telnet session.• Disconnect from a Telnet session.• Engage in multiple Telnet sessions.• Display active Telnet sessions.
DsmbISP_v40_ActivityMap June 2007 page 44 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
8.3.3.4 Hands-on Lab
ELO: 8.3.4 Using SNMP and SyslogTLO: 8.4 Backups and Disaster Recovery
ELO: 8.4.1 Backup MediaELO: 8.4.2 Methods of File Backup
8.4.2.3 Hands-on Lab
ELO: 8.4.3 Cisco IOS Software Backup and Recovery
8.4.3.2 Hands-on Lab
8.4.3.4 Hands-on Lab
ELO: 8.4.4 Disaster Recovery Plan
8.4.4.4 Media Activity not applicable
TLO: 8.5 Chapter SummaryELO: 8.5.1 Summary
Configuring a Remote Router Using SSH
Lab 8.3.3b Configuring a Remote Router Using SSH
Configure a remote router using SSH.• Use SDM to configure a router to accept SSH connections.• Configure SSH client software on a PC.• Establish a connection to a Cisco ISR using SSH version 2.• Check the existing running configuration.• Configure a non-SDM router for SSH using the Cisco IOS CLI.
Planning a Backup Solution
Lab 8.4.2 Planning a Backup Solution
Plan a backup solution for a small business. • Based on the business scenario, plan an appropriate backup solution.
Managing Cisco IOS Images with TFTP
Lab 8.4.3a Managing Cisco IOS Images with TFTP
Use a TFTP to backup and restore a Cisco IOS image.• Analyze the Cisco IOS image and router flash memory.• Use TFTP to copy the software image from a router to a TFTP server.• Reload the backup software image from a TFTP server into flash on a router.
Managing Cisco IOS Images with ROMMON and TFTP
Lab 8.4.3b Managing Cisco IOS Images with ROMMON and TFTP
Use ROMmon and tftpdnld to manage an IOS image.• Analyze the Cisco IOS image and router flash memory.• Back up a Cisco IOS software image to a TFTP server.• Use ROM monitor (ROMmon) and the tftpdnld command to restore an image from a TFTP server.
Disaster Recovery Plan
Identify the actions that are associated with each phase of creating a disaster recovery plan. Drag each disaster recovery plan phase to the corresponding action.
DsmbISP_v40_ActivityMap June 2007 page 45 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
TLO: 8.6 Chapter QuizELO: 8.6.1 Quiz
DsmbISP_v40_ActivityMap June 2007 page 46 of 55
Equipment Needed
Pencil and paper
Computer with Internet access to conduct research
• Windows XP Professional computer with administrative access• NTFS File System on the computer and Simple File Sharing turned off (under the Folder Options of Windows Explorer.)• User accounts preconfigured for users Bob and Joe• Internet connectivity
*Note: WPA is not supported by Packet Tracer at this time. However, WEP and WPA are enabled by a similar process.
DsmbISP_v40_ActivityMap June 2007 page 47 of 55
Equipment Needed
Sample SLA (included in lab)
• A Windows XP-based PC with an Ethernet network and at least two hosts• Wireshark Version 0.99.5 software (or most current version)• Internet connectivity (optional but desirable)• Access to the PC command prompt• Access to PC network TCP/IP configuration
• One router with two serial interfaces and one Fast Ethernet (1841 or other)• Two routers with one serial interface and one Fast Ethernet (1841 or other)• One 2960 switch (or comparable) for the R2 LAN• Three windows XP computers (hosts H2 and H3 are mainly for configuring routers R2 and R3)• Straight-through and crossover Category 5 Ethernet cables as required• Two null serial cables• Console cable to configure routers• Access to host H1 command prompt• Access to host H1 network TCP/IP configuration
DsmbISP_v40_ActivityMap June 2007 page 48 of 55
Equipment Needed
Pencil and paper
• Cisco 1841 ISR router with SDM version 2.4 installed and with basic configuration completed• (Optional) Other Cisco router model with SDM installed• (Optional) Other Cisco router model without SDM installed (Cisco IOS software version 12.2 or later; must support SSH)• Windows XP computer with Internet Explorer 5.5 or later and Sun Java Runtime Environment (JRE) version 1.4.2_05 or later (or Java Virtual Machine (JVM) 5.0.0.3810)• Latest release of putty.exe client installed on the PC and accessible on the desktop• Straight-through or crossover Category 5 Ethernet cable (for SDM and SSH)• (Optional) Console cable, if router is to be configured using the CLI• Access to the PC command prompt• Access to PC network TCP/IP configuration
• One router with an Ethernet interface• One Windows XP computer (or Discovery Server)• Crossover Category 5 Ethernet cable (H1 to router R1)• Console cable (from H1 to R1)• Access to the computer host command prompt• Access to the computer host network TCP/IP configuration
• One router with an Ethernet interface• One Windows XP computer (or Discovery Server)• Crossover Category 5 Ethernet cable (H1 to router R1)• Console cable (from H1 to R1)• Access to the computer host command prompt• Access to the computer host network TCP/IP configuration
DsmbISP_v40_ActivityMap June 2007 page 49 of 55
Equipment Needed
DsmbISP_v40_ActivityMap June 2007 page 50 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 9: Troubleshooting
TLO: 9.0 IntroductionELO: 9.0.1 Introduction
DsmbISP_v40_ActivityMap June 2007 page 51 of 55
Equipment Needed
DsmbISP_v40_ActivityMap June 2007 page 52 of 55
Co
urs
e
Ch
apte
r
TL
O
EL
O
Pag
e
Activity/Lab Title Handout Learning Objectives
CCNA Discovery Working at a Small-to-Medium Business or ISP (DsmbISP) v4.1(3)Chapter 10: Course Summary
TLO: 10.0 Putting It All TogetherELO: 10.0.1 Summary
10.0.1.2
10.0.1.3
PT Activity: Skills Practice
Putting It All Together
D2_PTAct_10_0_1_2.pdf
Use the knowledge and skills presented in this course to perform a simulated network upgrade.• Create an IP addressing plan for a small network• Implement a network equipment upgrade • Verify device configurations and network connectivity
Hands-on Lab: Summary
Putting It All Together
Summary Lab 10.0.1 Putting It All Together
Use the knowledge and skills presented in this course to perform this lab activity.• Given a customer work order, implement a network upgrade .• Review an existing customer network. • Create an IP addressing scheme for the upgraded network. • Create a physical diagram of the new network. • Use a configuration checklist and configure networking devices. • Use an installation checklist and connect the networking devices. • Use a verification checklist and verify connectivity and routing table updates.
DsmbISP_v40_ActivityMap June 2007 page 53 of 55
Equipment Needed
• ISP router with two serial interfaces and one Fast Ethernet interface (preconfigured by instructor)• Ethernet 2960 switch to connect to the ISP router (preconfigured by instructor)• Customer 1841 router (or other router with two Fast Ethernet interfaces and at least one serial interface to connect to the ISP)• Linksys WRT300N (or other Linksys that supports wireless)• Ethernet 2960 switch to connect wired hosts• Windows XP-based host to act as a wireless client (wireless NIC)• Windows XP-based host to act as a wired client (Ethernet NIC)• Category 5 cabling as necessary• Serial cabling as necessary• ISP work order (in this lab)• Device Configuration Checklist (in this lab)• Network Equipment Installation Checklist (in this lab)• Configuration Verification and Connectivity Checklist (in this lab)
Ch 1 Ch 2 Ch 3 Ch 4Equipment-based Labs 0 0 0 1
Paper-based Labs 1 0 1 1
PT Activities 2 1 3 3
Media Activities 2 4 1 2
Simulations 0 0 0 0
Games 0 0 0 0
Critical Thinking 0 0 0 0
113 Total (Labs, PT Activities, Media Activities, E-Lab Activities, and Simulations)
Ch 5 Ch 6 Ch 7 Ch 8 Ch 9 Ch 1010 3 2 6 11 1 34
1 0 1 4 6 0 15
12 2 0 2 7 1 33
3 2 3 2 7 0 26
4 0 0 0 1 0 5
0 0 0 0 0 0 0
0 0 0 0 0 0 0
113
113 Total (Labs, PT Activities, Media Activities, E-Lab Activities, and Simulations)