Creating Jewelry- DIY Handmade Earrings with Copper Wire

Creating jewelry is a great fun for people of various ages

and occupations. You don’t need any preparation; just

join us for this handmade earrings tutorial.

Materials and tools:

White flat round glass beads

0.5mm red copper wire

2mm white seed beads

8mm white acrylic beads

Silvery iron chain

Ear hooks

Head pins

Round nose pliers

Flat nose pliers

Wire cutter

Instructions:

Step 1: Make a chain dangle Step 2: Finish wire wrapped focal

Creating jewelry can be simple! This tutorial will to teach you how to make a pair of handmade earrings

with copper wire and acrylic beads.

1st, snip a piece of chain that measures about 5cm;

2ndona head pin, slide a seed bead and an acrylic

bead on and thread it through an end link;

3rd, with round nose pliers make wire a wrapped

loop with the tail of the pin;

4th cut off excess tail and identically make the

second wire wrapped loop over the other end of the

chain, and the third one over the 4th link above.

1st, pick a piece of 15cm copper wire and

bend both ends into a right angle;

2nd, make a wire wrapped loop on one end;

3rd, make a wavy pattern on a flat glass bead

and wrap this end around the other;

4th, thread the other end through the fifth

link of chain and make a wire wrapped loop

with pliers;

Step 3: Add ear hook on

Tada! The handmade earrings tutorial is done. If you have any good idea about creating jewelry

whether based on this tutorial or not, just tells us!

Shop for a varied assortment of acrylic beads please click:

http://www.pandahall.com/wholesale-Acrylic-Beads/126.html

Slightly open the loop under the ear hook and

attach it to the whole earring dangle.

The final look is like this: