cost volume profit analysisamjadalikhancollege.edu.in/wp-content/uploads/2020/07/...dr. varadraj...
TRANSCRIPT
-
Dr. Varadraj Bapat, IIT Mumbai 1
Module 2.
Cost Volume Profit Analysis
Dr. Varadraj Bapat Indian Institute of Technology, Mumbai
[email protected] 9892413119
mailto:[email protected]�
-
Dr. Varadraj Bapat, IIT Mumbai 2
Cost Volume Profit (CVP)
Introduction Fixed costs Variable costs Semi-variable costs Contribution margin Break even point PV Ratio
-
Dr. Varadraj Bapat, IIT Mumbai 3
CVP Analysis
CVP analysis is the analysis of three variable viz. cost, volume and profit. Such analysis explores the relationship existing amongst costs, revenue, activity level and resulting profit. It aims at measuring variation of cost with profit.
-
Dr. Varadraj Bapat, IIT Mumbai 4
Fixed Cost
These are the costs which incurred for a period and which within certain output and turnover limits, tend to be unaffected by fluctuations in the levels of activity (Output or turnover).
-
Dr. Varadraj Bapat, IIT Mumbai 5
For example: Rent, insurance of factory building etc. remain the same for different levels of production.
-
Dr. Varadraj Bapat, IIT Mumbai 6
Fixed Cost Graph
-
50,000
100,000
150,000
200,000
250,000
300,000
350,000
- 100 200 300 400 500 600 700 800
FC TC
Fixed Cost
Total Cost
Am
t
Units
-
Dr. Varadraj Bapat, IIT Mumbai 7
Variable Cost
These costs tend to very with the volume of activity. Any increase in activity results in an increase in the variable cost and vice versa.
For example: Cost of direct labour, direct material, etc.
-
Dr. Varadraj Bapat, IIT Mumbai 8
Variable Cost Graph
-
10,000
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
- 100 200 300 400 500 600 700 800
VC
Variable Cost
`
Units
-
Dr. Varadraj Bapat, IIT Mumbai 9
These costs contain both fixed and variable components and thus partly affected by fluctuation in the level of activity.
Examples of semi variable costs are telephone bill, gas and electricity etc.
Semi-Variable Cost
-
Dr. Varadraj Bapat, IIT Mumbai 10
Semi-Variable Cost Graph
-5,000
10,00015,00020,00025,00030,00035,00040,00045,000
- 100 200 300 400 500 600 700
SVC
Semi-Variable Cost
`
Units
-
Dr. Varadraj Bapat, IIT Mumbai 11
Cost-Volume-Profit Analysis
CVP analysis: Takes into account
– the total costs (fixed and variable) –the total sales revenues –desired profits vis-a-vis the sales volume
-
Dr. Varadraj Bapat, IIT Mumbai 12
It is used for forecasting or predicting how the changes in costs and sales volume affect profit. It is also known as 'Break-Even Analysis'.
CVP analysis could be helpful in the following situations:
-
Dr. Varadraj Bapat, IIT Mumbai 13
Budget planning: for forecasting profit by considering cost and profit relation, and volume of production volume. This will help in determining the sales volume required to make a profit. –To make decisions regarding pricing and sales volume.
-
Dr. Varadraj Bapat, IIT Mumbai 14
Determining the sales mix of different products, in what proportions each of the products can be sold. –Preparing flexible budget considering costs at different levels of production
-
Dr. Varadraj Bapat, IIT Mumbai 15
Objectives of CVP Analysis
–Understand the interaction among Prices of products Volume or level of activity Per unit variable cost Total fixed cost Mix of product sold
-
Dr. Varadraj Bapat, IIT Mumbai 16
Assumptions of CVP Analysis
• Expenses can be classified as either variable or fixed. • CVP relationships are linear over a wide range of
production and sales. • Sales prices, unit variable cost, and total fixed
expenses will not vary within the relevant range.
-
Dr. Varadraj Bapat, IIT Mumbai 17
• Volume is the only cost driver. • The relevant range of volume is specified. • Inventory levels will be unchanged. • The sales mix remains unchanged during the
period.
-
Dr. Varadraj Bapat, IIT Mumbai 18
Profit Volume Ratio (PV)
The contribution margin ratio (CMR) i.e. PV ratio is the percentage by which the selling price (or revenue) per unit exceeds the variable cost per unit, or contribution margin as a percentage of revenue.
-
Dr. Varadraj Bapat, IIT Mumbai 19
Calculations
Profit Equation and Contribution Margin 1.Profit =Sales -Total costs 2.Profit = Sales -Total variable costs - Total Fixed costs 3.Contribution margin = Total revenue – Total variable
costs
-
Dr. Varadraj Bapat, IIT Mumbai 20
Sales XX -Variable Cost (XX) Contribution XX -Fixed Cost (XX) Profit XX
-
Dr. Varadraj Bapat, IIT Mumbai 21
Profit = (S-V)*Q – FC Q = (FC + Expected Profit) (S-VC) Q is the no. of units required to be sold to obtain
target profit. S=Selling Price p.u. VC=Variable cost p.u.
FC=Fixed Cost
-
Dr. Varadraj Bapat, IIT Mumbai 22
BEP analysis
Breakeven analysis is used to find the minimum level of production required
Evaluates both fixed and variable costs
-
Dr. Varadraj Bapat, IIT Mumbai 23
Uses: 1. To find a suitable product mix 2. To find the sales required to reach a desired
revenue. 3. The profits at certain price level and sales
-
Dr. Varadraj Bapat, IIT Mumbai 24
Break even Point (BEP)
A CVP analysis can be used to determine the BEP, or level of operating activity at which revenues cover all fixed and variable costs, resulting in zero profit. In other words, this is the point where no profit or losses have been made
-
Dr. Varadraj Bapat, IIT Mumbai 25
Break even Applications
• Pricing decisions:- Enables to study the effect of changing price and volume relationship on total profits.
• Make or Buy Decision:- • Temporary Shut Down:-
-
Dr. Varadraj Bapat, IIT Mumbai 26
• Modernizations or automation decisions:- • Analysis the profit in implication of a modernization or
automation programme. • Expansion Decisions :- • studies the aggregate effect of a general expansion in
production and sales. • New Product decisions :- • Enables to determine the sale volume required for a
firm (or an individual product) to breakeven , given expected sales price and expected costs.
-
Dr. Varadraj Bapat, IIT Mumbai 27
Formulae
BEP in units = Total fixed costs (Sales price – variable cost p.u.) = Fixed cost Contribution per unit BEP in sales value = Fixed cost PV Ratio
-
Dr. Varadraj Bapat, IIT Mumbai 28
-
50,000
100,000
150,000
200,000
250,000
300,000
350,000
400,000
450,000
- 100 200 300 400 500 600 700 800
Cost-Volume-Profit Graph
Fixed expenses
Units Sold
Sal
es in
Rup
ees
Total expenses
Total sales Break-even point
-
Dr. Varadraj Bapat, IIT Mumbai 29
Suppose that Krishna Games wants to produce a new toy bike and has forecast the following information.
Price per bike = `800 Variable cost per bike = ` 300 Fixed costs related to bike production = `
55,00,000 Target profit = ` 2,00,000 Estimated sales = 12,000 bikes
Illustration 1
-
Dr. Varadraj Bapat, IIT Mumbai 30
Kindly determine 1. the quantity of bikes needed for break even and
to earn the target profit 2. PV Ratio 3. BEP in Amount 4. Estimated Profit
-
Dr. Varadraj Bapat, IIT Mumbai 31
We determine the quantity of bikes needed for the target profit as follows:
Contribution per unit = SP – VC pu = 800 – 300 = 500 1. Break Even (Q) = Total FC/ Contr pu. = 5500000/500 = 11000 bikes 1. Target Quantity = (`55,00,000 + `2,00,000) / (`800 - `300) = 11,400 bikes
-
Dr. Varadraj Bapat, IIT Mumbai 32
2. PV RATIO = Contribution pu/ SP = 500/800 = 0.625 3. Break Even (Amt) = Total FC/ PV Ratio = 5500000/0.625 = Rs. 8800000
-
Dr. Varadraj Bapat, IIT Mumbai 33
4. Estimated Profit = Estimated Q* Contr pu – FC = 12000*500 - 5500000 = 6000000 – 5500000 = 500000
-
Dr. Varadraj Bapat, IIT Mumbai 34
Margin of safety
• Margin of Safety= Actual Sale – BEP Sale • Margin of Safety (%) = (Sales - BEP)/Sales x 100
• Represents the safety available to the business at
the current level of sales.
-
Dr. Varadraj Bapat, IIT Mumbai 35
Illustration2
• M/s. Prabha Devi Ornaments • Sales 5000 units • Sales price per unit Rs. 50 • Variable cost per unit Rs. 30 • Fixed cost Rs. 35000 • Compute BEP Quantity and Amount and MOS (%)
-
Dr. Varadraj Bapat, IIT Mumbai 36
Therefore, contribution per unit = 50-30 =Rs. 20 1. BEP in units = FC/Contr. Pu = 35000/20
= 1750 units 2. BEP in sales value = 1750 * 50 = Rs. 87500 BEP in sales value = FC/PV Ratio = 35000*20/50 = Rs. 87500
-
Dr. Varadraj Bapat, IIT Mumbai 37
• Margin of Safety (%) = (Sales - BEP)/Sales x 100
• Margin of safety = (5000-1750) 5000 =65%
• Hence even if the sales decrease by 65%, the business wont face any loss
-
Dr. Varadraj Bapat, IIT Mumbai 38
Slide Number 1Cost Volume Profit (CVP)CVP AnalysisFixed CostSlide Number 5Fixed Cost GraphVariable CostVariable Cost GraphSemi-Variable CostSemi-Variable Cost GraphCost-Volume-Profit AnalysisSlide Number 12Slide Number 13Slide Number 14Objectives of CVP AnalysisAssumptions of CVP AnalysisSlide Number 17Profit Volume Ratio (PV)CalculationsSlide Number 20Slide Number 21BEP analysisSlide Number 23Break even Point (BEP)Break even ApplicationsSlide Number 26FormulaeCost-Volume-Profit GraphSlide Number 29Slide Number 30Slide Number 31Slide Number 32Slide Number 33Margin of safetyIllustration2Slide Number 36Slide Number 37Slide Number 38