cordless grass trimmer/edger - yw 20v trimmer eng  · cordless grass trimmer/edger toll-free:

Download Cordless Grass Trimmer/Edger - YW 20V Trimmer ENG   · Cordless Grass Trimmer/Edger Toll-free:

Post on 21-Jun-2018

218 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • IMPORTANT:Read and follow all safety rules and operating instructions before using this product.

    Cordless Grass Trimmer/Edger

    Toll-free: 1 866 523 5218

    Instruction Manual

    model no. 060-2293-6

    IMPORTANT:Read and follow all safety rules and operating instructions before using this product.

  • model no. 060-2293-6 | contact us: 1 866 523 5218 model no. 060-2293-6 | contact us: 1 866 523 5218

    Kno

    w Y

    our

    Trim

    mer

    Tabl

    e of

    Con

    tent

    sS

    peci

    ficat

    ions

    CORDLESS GRASS TRIMMER/EDGER

    Type: Cordless Battery: 20 V, 2.0 Ah, Li-ionFeed: AutomaticSpeed: 8,500 RPM (no load)Line Size: 0.065 (1.65 mm)Cutting path: 10 (25.4 cm)Charging time: Approx.1 hourWeight: 6 lb 6 oz (2.9 kg)

    Spool line/ battery: 60-2267-6/60-2068-4

    1. Lock-out button2. Switch trigger3. Upper handle4. Battery5. Auxiliary handle6. Auxiliary handle

    adjustment knob7. Split and telescoping

    shaft

    8. Motor housing9. Edge guide10. Guard11. Single line cutting

    spool12. Charger

    KNOW YOUR GRASS TRIMMER/EDGER

    The safe use of this product requires an understanding of the information on the product, this operators manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

    Specifications 2

    Know Your Trimmer 3

    Exploded View 4

    Parts List 5

    Assembly 6-7

    Operation 8-11

    Maintenance 12

    Troubleshooting 13

    Symbols 14

    Electrical Information 15

    General Safety Rules 16

    Warranty 17

    1

    5

    7

    8

    910

    11

    3

    2

    4

    6

    12

    2 3

  • model no. 060-2293-6 | contact us: 1 866 523 5218 model no. 060-2293-6 | contact us: 1 866 523 5218

    Exp

    lode

    d V

    iew

    Par

    t Lis

    t

    Item Description Drawing QTY1 Handle Assembly 34101725A 12 Spring 33401725 1

    3 Button 34104725 1

    4 Spring 33405505 1

    5 Battery Jack 34103967 1

    6 Switch Button 34102719 1

    7 Switch 36303152 1

    8 Spring Wire 36901867 1

    9 Front Handle Assembly 34105185-3 1

    10 Upper Tube 31102725 1

    11 Knob 34101185-2 1

    12 Motor Housing Assembly 34101725 1

    13 Motor Fan Assembly 31105725 1

    14 Edge Guide 33306725 1

    15 Guard Assembly 31106725 1

    16 Battery Charger 31102967 117 Battery 31106905 1

    4 5

  • model no. 060-2293-6 | contact us: 1 866 523 5218 model no. 060-2293-6 | contact us: 1 866 523 5218

    Ass

    embl

    y

    BATTERY IMPORTANT! The battery is not shipped fully charged. It is recommended that the battery be fully charged before the initial use. With regular use, the battery pack will take 90 MINUTES or less to charge fully. It is recommended that the battery be charged every 3 months when the trimmer is not in use. The batterys run time will improve after the third or fourth charge.

    TO REMOVE ThE BATTERY

    1. Press in and hold the latch buttons ( 1 ) on both side s of the battery pack.2. Grasp the trigger handle (2) firmly. Pull the battery pack out of the handle.3. NOTE: The battery pack fits snugly into the handle to prevent accidental dislodging. It

    may require a strong pull to remove.

    TO INSTALL

    1. Align the tongue (3) of the battery pack with the cavity in the handle housing.

    2. Grasp the trigger handle (2) firmly.3. Push the battery pack into the handle until

    both sides lock. The latch buttons will click when they lock.

    4. Do not use force when inserting the battery pack. It should slide into place and click.

    ! WARNING! To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach when operating the grass trimmer. Keep proper balance at all times for better control of the tool in unexpected situations.

    GUARD1. Remove the battery pack.2. Invert the grass trimmer to access the trimmer

    head.3. Using a Phillips head screwdriver, remove th e pre-

    installed screw (1) from the trimmer head.4. Place the guard (2) on to the trimmer head and turn

    the guard 45 following the track on the head.5. Align the screw hole on the guard with the screw

    hole on the trimmer head.6. Insert the screw into the trimmer head, fastening

    the guard in place.

    ASSEMBLE ThE TWO hALVES Of ThE ShAfT

    1. Insert the lower shaft(3) into upper shaft(2).

    2. Then turn the upper shaft(2) until lock button clicks into place.3. Turn the lower shaft(3) collar until locked into place.

    Auxiliary handle

    1. Turn the handle lock knob (1) counter-clockwise several turns to loosen the auxiliary handle (2).

    2. Adjust the handle position to provide the best level of balance and control for the operator.

    3. Securely lock the handle in position by turning the knob clockwise.

    4. Before operating the grass trimmer, make sure the auxiliary handle is tightly locked into position.

    1

    2

    3

    ! WARNING! To avoid injury and to reduce the risk of electric shock or fire: Replace the battery pack or charger immediately if the battery

    case or charger cord is damaged. Always make sure the grass trimmer switch is Off before

    inserting or removing the battery pack. Always make sure the battery pack is removed and the switch

    turned Off before replacing spools or adjusting the line. Read, understand, and follow the Battery Charger instructions.

    Ass

    embl

    y

    31

    2

    2

    1

    Cutting Line:

    A spool of monofilament cutting line is preinstalled on the grass trimmer. When the cutting line needs replacing, insert a new spool.

    To remove the spool:

    1. Disconnect trimmer from the power supply.2. Turn grass trimmer over to access the spool.3. Remove spool cover by pressing on two tabs parallel to each other on the side of the cover (2).4. Remove the spool (1) from the spool housing (3).

    To replace the spool:

    1. Replace the spool (1) with a new pre-wound spool.2. Insert the end of line through the opening (4) in the spool housing (3).3. Align the tabs on the spool cover with the slots in the spoo l housing on the trimmer head.4. Push down on the spool cover, locking it to the spool housing.5. To advance the line when initially installed, you must pull the line while pressing the black line release button on the side of the spool housing (3).

    2

    1

    4

    3

    6 7

    1

    2

  • model no. 060-2293-6 | contact us: 1 866 523 5218 model no. 060-2293-6 | contact us: 1 866 523 5218

    Ope

    ratio

    n

    ! WARNING! To avoid injury:

    To Turn On/Off

    1. Press the safety lock out button (2) and squeeze the trigger switch (1) to start.2. Release the trigger switch (1) to stop.

    Split and telescoping tube

    The shaft can be extended or shortened for ease of use.

    1. Unscrew telescoping shaft coupler and slide to desired position.

    2. Tighten telescoping shaft coupler.

    The cutting path can be adjust from 10 to 12.Phillips screwdriver(not supply) will be used.

    Loosen the screw and turn the cutter 180 then tighten thescrew.

    10 12

    Adjust the cutting path

    Lengthening the Line

    While the grass trimmer is operating, thecutting line gets worn down andbecomes shorter. This trimmer isequipped with Automatic LineAdvancement, which automaticallyfeeds additional line to thecorrect length as it wears down.

    If the line does not automaticallyadvance, the trimmer line may betangled or empty.

    To advance the line, restart the trimmer.Upon starting, the line will automaticallyadvance.

    Edging function

    This trimmer is equipped with an edging feature for use on the sidewalks or walkways, patios and/or driveways to clear over-grown grass from manicured surfaces.

    1. Pull up edging coupler and turn handle end counterclockwise.2. Release edging shaft coupler when handle has been rotated 180.3. Flip the edging guide down until it locks into place.

    12

    TO ROTATEPULL UP BUTTON

    EDGER GUIDE

    REAR HANDLE

    Do not squeeze the trigger while the grass trimmer/edger is inverted.

    Do not carry the grass trimmer/edger with your finger on the switch. Avoid unintentional starting.

    Ope

    ratio

    nSPLIT AND TELESCOPING

    SHAFT

    8 9

  • model no. 060-2293-6 | contact us: 1 866 523 5218 model no. 060-2293-6 | contact us: 1 866 523 5218

    Ope

    ratio

    n

    ! WARNING! If the battery is inserted into the charger when warm or hot, the ChECK BATTERY indicator light may switch on. If this occurs allow the battery to cool outside of the charger for 30 minutes.

    Ope

    ratio

    n

    Operating instructions

    Trimmer Tips

    Checking the Charge

    If the battery pack does not charge properly: Check the current at the power outlet with another tool. Make sure that the outlet is not turned off.

    Charger mounting1. This charger can be installed hanging on a wall using two screws (not supplied).2. Locate the placement for the charger to be wall mounted.3. If fastening to wood studs, use 2 wood screws.4. Drill two holes 2 1/3 (6 cm) on centre, ensuring they are level.5. If fastening to drywall, use wall anchors and screws to secure the charger to the wall.

    Charging ProcedureWith regular use, the battery pack will need approx 1 hour or less to fully charge. Allow the battery to fully discharge before recharging. It is recommended to charge the battery pack ever

Recommended

View more >