copyright silca spa 2007 olympicsilca s.p.a. olympic
TRANSCRIPT
COPYRIGHT SILCA SpA 2007
OlympicSilca S.p.A.
OlympicOlympic
COPYRIGHT SILCA SpA 2007
Olympic Silca S.p.A.
Olympic is professional key-cutting machine for bit, double bit and pump keys.
Olympic
COPYRIGHT SILCA SpA 2007
Olympic Silca S.p.A.
The tracer point is housed on the left-hand side of the machine base. Its depth settings are easily regulated.
Tracer point
COPYRIGHT SILCA SpA 2007
Olympic Silca S.p.A.
Side 1 key cutting: BIT keys and DOUBLE BIT keys
Clamp - Side 1
COPYRIGHT SILCA SpA 2007
Olympic Silca S.p.A.
Side 2 key cutting: PUMP keys and CHUBB type keys (bit key with collar)
Clamp - Side 2
COPYRIGHT SILCA SpA 2007
Olympic Silca S.p.A.
The tool is in hard metal (carbide) and is the part of the machine which cuts the key blank.
Cutting tool
COPYRIGHT SILCA SpA 2007
Olympic Silca S.p.A.
Technical DataCutter: hard metal (carbide)
Motor: one speed, single phase - 230V-50Hz
Clamp: 2 sides
Dimensions: L470xP350xH260
Weight: 26 Kg
COPYRIGHT SILCA SpA 2007
OlympicSilca S.p.A.
IMPORTANT
All information and illustrations in this documentation are for guidance only. Silca reserves the right to alter products designs, dimensions or info to improve the products quality. The contents of this documentation are fully protected by Copyright and may not be copied or reproduced in any form, without written permission from Silca. Any infringements will be dealt with under Italian law.
In compliance with current regulations relating to industrial property, we hereby state that the trade-marks or trade names mentioned in our documentation are the exclusive property of authorized manufacturers of locks and users. Said trade-marks or trade names are nominated only for the purposes of information so that any lock for which our keys are made can be rapidly identified. This documentation is reserved exclusively for professional key cutters who use Silca products.