copper cabling system - · pdf filecategory 5e easy crimp system 2001018-19-20-en jacks...
TRANSCRIPT
:top speed
iNsTaLLaTiON Time saViNG a cOmpLeTe raNGe OF prODUcTs reLiaBiLiTy
ExtErnal CaP for thE tErminationProtECtion With 360° shiEld
ConnECtion CaP With insErtion KEY anddUal t568a/B WirinG laBEl
snaP-in ComPatiBlE With KEYstonEstandard
rEUsaBlE WithEasY oPEninG
tWo Color oPtions for thE ConnECtor BodY to sUit thE WorK oUtlEt
4
easy c
rim
p
easy
cerTiFieD
GUaraNTeeD
0 60 Sec.
1 32 4
Innovation and constant development of products that follow and
anticipate the needs of a technological and technical market are
accompanied by product certifications issued by independent
laboratories such as Delta in Denmark or GHMT in Germany. The
BaseLink, 10GLink and HiLink Series are certified according to the
most recent international standards and boast top results both for
single components and systems. Homologation certificates can be
submitted upon request.
4. By matching the insertion way arrows of the external cap and of the jack, you complete the crimp. In case of shielded jack, a bayonet and a supplied tie assure a 360° cable shield.
2. The compulsory insertion key avoid the incorrect po-sitioning of the connection cap inside the jack. With an easy by hand “click”, or by using the “CRIMP tool”, the termination crimp is conclu-ded.
3. By using flat blades nippers, cut the conductors surplus jutting out from the connection cover cap. A proper insulation located inside the cap avoid short-circuits in shielded jacks.
1. By following the double labeling T568A/B color scheme, insert the pairs in the connection cap holes. The conductors have to be blocked in the appropriate slots.
Education is the necessary investment required for those who want
to grow professionally and thus ensure quality installations and
regulatory compliance. Qubix S.p.A. supports its customers right from
the pre-sales phase, organizing training courses devoted to the cabling
planning, realization and certification. The certificate released after the
course allows the authorized installer to guarantee the performance of
an installation up to 30 years, provided that it is fully made of products
branded C.C.S.
Class EA
Certificate No. z2661a-11-E
Customer: QUBIX SPA Via Canada 22/a 35127 Padova - Italy Test sample(s): Outlet:
HI LINK Easy Crimp Cat. 6A die casting shielded keystone jack Part No.: 2001024
Patchpanel: HI-LINK Easy Crimp Cat. 6A 24-position shielded patch panel Part No.: 2002040
Data Cable: HI LINK R6A-FF4H23 F/FTP 4x2xAWG 23/1 LSZH Cat.6A Part No.: M05028 25
Patchcord: HI-LINK RJ45-RJ45 patch cord FTP Cat.6A Part No.: 2005094 Applied standard(s):
ISO/IEC 11801 AMD 1 (2008-04)
Results:
Up to a bandwidth of 500 MHz the sample meet the Class EA limits of the specified
standards and regulations.
CChhaannnneell ,, CCllaassss EEAA
The test results which were determined in the course of the measurement refer to the submitted
specimen. Any future technical modifications of the verified Products are subject to the responsibility of
the manufacturer. This Certificate refers to the comprehensive test report, no. P2661a-11-E, from September 22nd, 2011
and shall only be applicable in conjunction with the test report.
Bexbach, September 22nd, 2011
Dirk Wilhelm, engineer (Chairman of the Managing Board)
GHMT AG
In der Kolling 13 D-66450 Bexbach Phone: +49 (0) 68 26 / 92 28 – 0 Fax: +49 (0) 68 26 / 92 28 – 99 Email: [email protected]
Si certifica che il sistema di cablaggio
HI LINK installato presso:
qubix s.p.a.
cLIeNte:
INdIrIzzo:
è stato installato e collaudato in conformità ai requisiti
del Manuale di Certificazione degli Installatori, basato
sulle normative CENELEC, ISO/IEC, TIA/EIA inerenti al
cablaggio per telecomunicazioni, ed è quindi garantito
per un periodo di 30 anni dalla data del rilascio, sulle
prestazioni del sistema verificate al momento del
collaudo.
dItta INStaLLatrIce:
INdIrIzzo:
autorIzzazIoNe N°:
data dI rILaScIo:
N° dI regIStrazIoNe:
INStaLLatore autorIzzato:
di garanziaCertificato
di garanziaCertificato
HI
LINK
Loghi BASE/10G/BASE/FIBER LINK
LOGO AP HOTEL ( )
LOGHI DEFINITIVIQUBIX
24/02/20101
attestato di installatore autorizzato
del sistema di cablaggio strutturato ccs
qubix s.p.a.
addì
autorizzazione n°:
rilasciato alla società:
tecnico:
A
5
Category 5E
Easy Crimp System2001018-19-20-EN
Jacks
Description
CAT 5E CCS shielded and unshielded RJ45 jacks for transmission channels of Class D.The “Easy Crimp” termination system makes the connection fast and easy without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with CAT 5E (Class D) requirements on the single component, they support Gigabit Ethernet applications (IEEE 802.3ab) and are suitable for POE (IEEE 802.3af).
Performance
Certifications CAT 5E Component Level - Delta technical report N312814-01
Approvals ISO/IEC 11801:2002 (Ed. 2.0) amend. A1/A2IEC 60603-7-2/3: (Ed. 2.0)EN 50173-2:2007 amend. A1:2009 includedANSI/TIA-568-C.2:2009
Warranty 20 years on the CCS system
General characteristics
Material Polycarbonate, high-impact, flame-retardant plastic housing, metal coated (only for the shielded version). 8 phosphor bronze contacts plated with 50 µm hard gold.
Connection Reusable connection cap with ergonomic slots to facilitate the conductors positioning; IDC insulation displacement for solid or stranded copper conductors of diameter from 22 to 26 AWG; double labeling color scheme indicating the two T568A/B connections, external cap for the termination protection.
Installation Keystone universal snap-in for installation on panels, faceplates, adapters and outdoor boxes.
Color White/anthracite-unshielded versionAluminum Grey-shielded version
Code Description Packaging60 pcsCAT 5E CCS Easy Crimp shielded RJ45 jack200101960 pcsCAT 5E CCS Easy Crimp unshielded RJ45 jack - anthracite200102060 pcsCAT 5E CCS Easy Crimp unshielded RJ45 jack - white2001018
6
Category 5E
Easy Crimp System2002035-36-EN
Patch panels
Description
CAT 5E CCS 24-port patch panel, supplied with 24 “Easy Crimp” shielded or unshielded RJ45 jacks for transmission channels of Class D.The “Easy Crimp” termination system makes the connection fast and easy without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with CAT 5E (Class D) requirements on the single component, they support Gigabit Ethernet applications (IEEE 802.3ab) and are suitable for POE (IEEE 802.3af).
Performance
Certifications CAT 5E Component Level - Delta technical report N312814-01
Approvals ISO/IEC 11801:2002 (Ed. 2.0) amend. A1/A2IEC 60603-7-2/3: (Ed. 2.0)EN 50173-2:2007 amend. A1:2009 includedANSI/TIA-568-C.2:2009
Warranty 20 years on the CCS system
General characteristics
Structure Metal frame with 24 ports for Keystone Easy Crimp jacks; ABS casing with 8-position covers; mount release lateral screws cover with logos; Jacks layout in two rows; setting for connection to ground.
Equipment 1 CCS 24-port patch panel; 24 CAT 5E CCS “Easy Crimp” shielded or unshielded RJ45 jacks; frontal cover for 8/16/24 positions modules; clear plastic label-holder for the personalized numbering; rear cable management; 24 dust-protection caps for the jacks; rack mount screws and nuts, cable ties.
Dimensions 19”, 1 Unit
Color Black
Code Description Packaging1 pcCCS 24-port patch panel with 24 CAT 5E CCS Easy Crimp shielded RJ45 jacks20020361 pcCCS 24-port patch panel with 24 CAT 5E CCS Easy Crimp unshielded RJ45 jacks2002035
easy c
rim
p
7
Category 6A Channel
Easy Crimp System2001015-16-17-EN
Jacks
Description
CAT 6A-10G CCS shielded and unshielded RJ45 jacks for transmission channels of Class EA.The “Easy Crimp” termination system makes the connection fast and easy, without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with Class EA requirements on the channel link at 500 Mhz and with CAT 6 requirements on the single component, they support 10Gigabit Ethernet applications (IEEE 802.3an) and are suitable for POE+ (IEEE 802.3at).
Performance
Certifications Channel Class EA – Delta technical report N312921-01CAT 6 Component Level - Delta technical report N313015
Approvals ISO/IEC 11801:2011 (Ed. 2.2)IEC 60603-7-4:2010 / IEC 60603-7-5:2010EN 50173-1:2011EN 50173-2:2007 amend. A1:2010 includedANSI/TIA-568-C.2:2009
Warranty 30 years on the CCS system
General characteristics
Material Polycarbonate, high-impact, flame-retardant plastic housing, metal coated (only for the shielded version). 8 phosphor bronze contacts plated with 50 µm hard gold.
Connection Reusable connection cap with ergonomic slots to facilitate the conductors positioning; IDC insulation displacement for solid or stranded copper conductors of diameter from 22 to 26 AWG; double labeling color scheme indicating the two T568A/B connections, external cap for the termination protection.
Installation Keystone universal snap-in for installation on panels, faceplates, adapters and outdoor boxes.
Color White/anthracite-unshielded versionAluminum Grey-shielded version
Code Description Packaging60 pcsCAT 6A Channel 10G.EXE CCS Easy Crimp shielded RJ45 jack200101660 pcsCAT 6A Channel 10G.EXE CCS Easy Crimp unshielded RJ45 jack-Anthracite200101760 pcsCAT 6A Channel 10G.EXE CCS Easy Crimp unshielded RJ45 jack-White2001015
8
Category 6A Channel
Easy Crimp System2002037-38-EN
Patch panels
Description
CAT 6A-10G CCS 24-port patch panel, supplied with 24 “Easy Crimp” shielded or unshielded RJ45 jacks for transmission channels of Class EA.The “Easy Crimp” termination system makes the connection fast and easy without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with Class EA requirements on the channel link at 500 Mhz and with CAT 6A requirements on the single component, they support 10Gigabit Ethernet applications (IEEE 802.3an) and are suitable for POE+ (IEEE 802.3at).
Performance
Certifications Channel Class EA – Delta technical report N312921-01CAT 6 Component Level - Delta technical report N313015
Approvals ISO/IEC 11801:2011 (Ed. 2.2)IEC 60603-7-4:2010 / IEC 60603-7-5:2010EN 50173-1:2011EN 50173-2:2007 amend. A1:2010 includedANSI/TIA-568-C.2:2009
Warranty 30 years on the CCS system
General characteristics
Structure Metal frame with 24 ports for Keystone Easy Crimp jacks; ABS casing with 8-position covers; mount release lateral screws cover with logos; Jacks layout in two rows; setting for connection to ground.
Equipment 1 CCS 24-port patch panel; 24 CAT 6A-10G.EXE CCS “Easy Crimp” shielded or unshielded RJ45 jacks; frontal cover for 8/16/24 positions modules; clear plastic label-holder for the personalized numbering; rear cable management; 24 dust-protection caps for the jack; rack mount screws and nuts, cable ties.
Dimensions 19”, 1 Unit
Color Black
Code Description Packaging1 pcCCS 24-port patch panel with 24 CAT 6A 10G. EXE Channel CCS Easy Crimp shielded RJ45 jacks20020381 pcCCS 24-port patch panel with 24 CAT 6A 10G. EXE Channel CCS Easy Crimp unshielded RJ45 jacks2002037
easy c
rim
p
9
Category 6A
Easy Crimp System2001024-EN
Die-cast shielded jack
Description
CAT 6A CCS die-cast shielded CCS RJ45 jack for transmission channels of Class EA.The “Easy Crimp” termination system makes the connection fast and easy, without the use of tools allowing a considerable time saving during the installation phase.Certified by independent testing laboratories in accordance with Class EA requirements on the channel link at 500 Mhz and with CAT6A requirements on the single component, they support 10Gigabit Ethernet applications (IEEE 802.3an) and are suitable for POE+ (IEEE 802.3at).
Performance
Certifications Channel Class EA - GHMT technical report N.z2661a-11-ECAT 6A Component Level - Delta technical report N313098
Approvals ISO/IEC 11801:2011 (Ed. 2.2)IEC 60603-7-51:2010EN 50173-1:2011EN 50173-2:2007 amend. A1:2010 includedANSI/TIA-568-C.2:2009
Warranty 30 years on the CCS system
General characteristics
Material Polycarbonate, high-impact, flame-retardant plastic housing, die-cast zinc alloy metal shell; 8 phosphor bronze contacts plated with 50 µm hard gold.
Connection Reusable connection cap with ergonomic slots to facilitate the conductors positioning; IDC insulation displacement for solid or stranded copper conductors of diameter from 22 to 26 AWG; double labeling color scheme indicating the two T568A/B connections, external cap for the termination protection; black anti-dust cap.
Installation Keystone universal snap-in for installation on panels, faceplates, adapters and outdoor boxes.
Code Description Packaging60 pcsCAT 6A CCS Easy Crimp die-cast shielded Keystone RJ45 jack, T568A/B2001024
10
Category 6A
Easy Crimp System2002040-EN
Patch panels
Description
CAT 6A CCS 24-port patch panel, supplied with 24 “Easy Crimp” die-cast shielded RJ45 jacks for transmission channels of Class EA.The “Easy Crimp” termination system makes the connection fast and easy without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with Class EA requirements on the channel link at 500 Mhz and with CAT6A requirements on the single component, they support 10Gigabit Ethernet applications (IEEE 802.3an) and are suitable for POE+ (IEEE 802.3at).
Performance
Certifications Channel Class EA - GHMT technical report N.z2661a-11-ECAT 6A Component Level - Delta technical report N313098
Approvals ISO/IEC 11801:2011 (Ed. 2.2)IEC 60603-7-5:2010EN 50173-1:2011EN 50173-2:2007 amend. A1:2010 includedANSI/TIA-568-C.2:2009
Warranty 30 years on the CCS system
General characteristics
Structure Metal frame with 24 ports for Keystone Easy Crimp jacks; 8 position modules in ABS; mount release lateral screws cover with logos; Jacks layout in two rows to exceed the Alien Next requirements; setting for connection to ground.
Equipment 1 CCS 24-port patch panel; 24 CAT 6A CCS “Easy Crimp” die-cast shielded RJ45 jacks; cover for 8/16/24 positions modules; clear plastic label-holder for the personalized numbering; rear cable management; 24 dust-protection caps for the jacks; rack mount screws and nuts, cable ties.
Dimensions 19”, 1 Unit
Color Black
Code Description Packaging1 pcCCS 24-port patch panel with CAT 6A CCS Easy Crimp shielded RJ45 jacks2002040
easy c
rim
p
11
Accessories
Easy Crimp System
2002012-EN 2004096-EN2
24-position blank Patch Panel
Characteristics
Cover for 8/16/24 positions modules Jacks layout in 2 rows Clear plastic label-holder Metal frame for the shielded jacks grounding Rear cable management
Module covers
Characteristics
2 covers for 8-position modules On frontal module of CCS Easy Crimp patch panels Optimize the distribution of the cabling and active
links depending on the different multimedia applications Flame retardant thermoplastic material
Crimp tool
Characteristics
Tool useful for the cable preparation and termination Pressure system for the protection of the cap closing Lenght-reference for the cable jacket cutting Blade inserts for cables with higher/lower diameter Thermoplastic flame retardant material
Nippers
Characteristics
Flat blade nippers to cut the excess conductors afterCCS Easy Crimp free jacks crimping
Made of steel, light blue handles in thermoplastic material Spring return to the opening position Flat blade for precise cutting
2004095-EN-2 2004094-EN-2
Codice2002012-ENDescrizione
Codice2004096-EN2Descrizione
Codice2004095-EN-2Descrizione
Codice2004094-EN-2Descrizione
Code 2002012 Description Easy Crimp 24-position blank Patch Panel
Code 2004096 Description Set of two black covers for CCS Easy Crimp patch panel
Code 2004095 Description Crimp tool for CCS Easy Crimp jacks
Code 2004094 Description Flat blade nippers for CCS Easy Crimp jacks
Code 2002012 Description Easy Crimp 24-position blank Patch Panel
Code 2004096 Description Set of two black covers for CCS Easy Crimp patch panel
Code 2004095 Description Crimp tool for CCS Easy Crimp jacks
Code 2004094 Description Flat blade nippers for CCS Easy Crimp jacks
Code 2002012 Description Easy Crimp 24-position blank Patch Panel
Code 2004096 Description Set of two black covers for CCS Easy Crimp patch panel
Code 2004095 Description Crimp tool for CCS Easy Crimp jacks
Code 2004094 Description Flat blade nippers for CCS Easy Crimp jacks
Code 2002012 Description Easy Crimp 24-position blank Patch Panel
Code 2004096 Description Set of two black covers for CCS Easy Crimp patch panel
Code 2004095 Description Crimp tool for CCS Easy Crimp jacks
Code 2004094 Description Flat blade nippers for CCS Easy Crimp jacks
2002012-EN 2004096-EN2
24-position blank Patch Panel
Characteristics
Cover for 8/16/24 positions modules Jacks layout in 2 rows Clear plastic label-holder Metal frame for the shielded jacks grounding Rear cable management
Module covers
Characteristics
2 covers for 8-position modules On frontal module of CCS Easy Crimp patch panels Optimize the distribution of the cabling and active
links depending on the different multimedia applications Flame retardant thermoplastic material
Crimp tool
Characteristics
Tool useful for the cable preparation and termination Pressure system for the protection of the cap closing Lenght-reference for the cable jacket cutting Blade inserts for cables with higher/lower diameter Thermoplastic flame retardant material
Nippers
Characteristics
Flat blade nippers to cut the excess conductors afterCCS Easy Crimp free jacks crimping
Made of steel, light blue handles in thermoplastic material Spring return to the opening position Flat blade for precise cutting
2004095-EN-2 2004094-EN-2
Codice2002012-ENDescrizione
Codice2004096-EN2Descrizione
Codice2004095-EN-2Descrizione
Codice2004094-EN-2Descrizione
12
Category 5E
Patch cords and plugs2005026/27/35-EN
Patch cords
Description
CAT 5E CCS RJ45-RJ45 shielded or unshielded patch cord, with interchangeable colored clips. Characteristics meet and exceed CAT 5E - Class D requirements up to 100 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for Gigabit Ethernet (IEEE 802.3ab) applications.
Performance
Compliance CAT 5E – Class D
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs, AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Thermo-sealed protection cap; insulation displacement according to IEC 60352-4; T568B wiring diagram; gray, blue, red, interchangeable clips for easy application identification
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color Blue RAL 5015 or Gray RAL 7032 for the unshielded version Grey RAL 7032 for the shielded version
Length Patch Cord CAT 5E U/UTP Grey Patch Cord CAT 5E U/UTP Blue Patch Cord CAT 5E F/UTP Grey0,25 mt 2005026 - -0,5 mt 2005025 - 20050351 mt 2005021 2005027 20050312 mt 2005022 2005028 20050323 mt 2005023 2005029 20050335 mt 2005024 - 2005034
2005026/27/35-EN
Patch cords
Description
CAT 5E CCS RJ45-RJ45 shielded or unshielded patch cord, with interchangeable colored clips. Characteristics meet and exceed CAT 5E - Class D requirements up to 100 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for Gigabit Ethernet (IEEE 802.3ab) applications.
Performance
Compliance CAT 5E – Class D
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs, AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Thermo-sealed protection cap; insulation displacement according to IEC 60352-4; T568B wiring diagram; gray, blue, red, interchangeable clips for easy application identification
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color Blue RAL 5015 or Gray RAL 7032 for the unshielded version Grey RAL 7032 for the shielded version
Length Patch Cord CAT 5E U/UTP Grey Patch Cord CAT 5E U/UTP Blue Patch Cord CAT 5E F/UTP Grey0,25 mt 2005026 - -0,5 mt 2005025 - 20050351 mt 2005021 2005027 20050312 mt 2005022 2005028 20050323 mt 2005023 2005029 20050335 mt 2005024 - 2005034
14
Category 6
Patch cords and plugs2005061/71-EN
Patch cords
Description
CAT 6 CCS RJ45-RJ45 shielded or unshielded patch cord, with interchangeable colored clips. Characteristics meet and exceed CAT 6 - Class E requirements up to 250 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for Gigabit Ethernet (IEEE 802.3ab) applications.
Performance
Compliance CAT 6 – Class E
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs with AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Thermo-sealed protection cap; insulation displacement according to IEC 60352-4; T568B wiring diagram; gray, blue, red, interchangeable clips for easy application identification
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color White RAL 9018
Length Patch Cord CAT 6 U/UTP White Patch Cord CAT 6 F/UTP White1 mt 2005061 20050712 mt 2005062 20050723 mt 2005063 20050735 mt 2005066 20050767 mt 2005067 -
10 mt 2005068 -15 mt 2005069 -
2005061/71-EN
Patch cords
Description
CAT 6 CCS RJ45-RJ45 shielded or unshielded patch cord, with interchangeable colored clips. Characteristics meet and exceed CAT 6 - Class E requirements up to 250 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for Gigabit Ethernet (IEEE 802.3ab) applications.
Performance
Compliance CAT 6 – Class E
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs with AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Thermo-sealed protection cap; insulation displacement according to IEC 60352-4; T568B wiring diagram; gray, blue, red, interchangeable clips for easy application identification
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color White RAL 9018
Length Patch Cord CAT 6 U/UTP White Patch Cord CAT 6 F/UTP White1 mt 2005061 20050712 mt 2005062 20050723 mt 2005063 20050735 mt 2005066 20050767 mt 2005067 -
10 mt 2005068 -15 mt 2005069 -
paTc
h c
OrD
s a
ND
pLU
Gs
2005026/27/35-EN
Patch cords
Description
CAT 5E CCS RJ45-RJ45 shielded or unshielded patch cord, with interchangeable colored clips. Characteristics meet and exceed CAT 5E - Class D requirements up to 100 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for Gigabit Ethernet (IEEE 802.3ab) applications.
Performance
Compliance CAT 5E – Class D
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs, AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Thermo-sealed protection cap; insulation displacement according to IEC 60352-4; T568B wiring diagram; gray, blue, red, interchangeable clips for easy application identification
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color Blue RAL 5015 or Gray RAL 7032 for the unshielded version Grey RAL 7032 for the shielded version
Length Patch Cord CAT 5E U/UTP Grey Patch Cord CAT 5E U/UTP Blue Patch Cord CAT 5E F/UTP Grey0,25 mt 2005026 - -0,5 mt 2005025 - 20050351 mt 2005021 2005027 20050312 mt 2005022 2005028 20050323 mt 2005023 2005029 20050335 mt 2005024 - 2005034
2005026/27/35-EN
Patch cords
Description
CAT 5E CCS RJ45-RJ45 shielded or unshielded patch cord, with interchangeable colored clips. Characteristics meet and exceed CAT 5E - Class D requirements up to 100 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for Gigabit Ethernet (IEEE 802.3ab) applications.
Performance
Compliance CAT 5E – Class D
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs, AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Thermo-sealed protection cap; insulation displacement according to IEC 60352-4; T568B wiring diagram; gray, blue, red, interchangeable clips for easy application identification
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color Blue RAL 5015 or Gray RAL 7032 for the unshielded version Grey RAL 7032 for the shielded version
Length Patch Cord CAT 5E U/UTP Grey Patch Cord CAT 5E U/UTP Blue Patch Cord CAT 5E F/UTP Grey0,25 mt 2005026 - -0,5 mt 2005025 - 20050351 mt 2005021 2005027 20050312 mt 2005022 2005028 20050323 mt 2005023 2005029 20050335 mt 2005024 - 2005034
15
Category 6
Patch cords and plugs2005101-04-EN
Patch cords - LSZH
Description
CAT 6 CCS RJ45-RJ45 unshielded patch cord with LSZH jacket, supplied with interchangeable colored clips. Characteristics meet and exceed CAT 6 - Class E requirements up to 250 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for Gigabit Ethernet (IEEE 802.3ab) applications.
Performance
Compliance CAT 6 – Class E
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP cable, 100 Ohm, 4 balanced pairs with AWG 24/7 flex bare copper conductors; LSZH (Low Smoke Zero Halogen) flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Thermo-sealed protection cap; insulation displacement according to IEC 60352-4; T568B wiring diagram; interchangeable clips for easy application identification
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color Orange RAL 2003
Length Patch Cord CAT 6 U/UTP Orange LSZH1 mt 20051012 mt 20051023 mt 20051035 mt 2005104
2005101-04-EN
Patch cords - LSZH
Description
CAT 6 CCS RJ45-RJ45 unshielded patch cord with LSZH jacket, supplied with interchangeable colored clips. Characteristics meet and exceed CAT 6 - Class E requirements up to 250 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for Gigabit Ethernet (IEEE 802.3ab) applications.
Performance
Compliance CAT 6 – Class E
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP cable, 100 Ohm, 4 balanced pairs with AWG 24/7 flex bare copper conductors; LSZH (Low Smoke Zero Halogen) flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Thermo-sealed protection cap; insulation displacement according to IEC 60352-4; T568B wiring diagram; interchangeable clips for easy application identification
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color Orange RAL 2003
Length Patch Cord CAT 6 U/UTP Orange LSZH1 mt 20051012 mt 20051023 mt 20051035 mt 2005104
16
Category 6A
Patch cords and plugs
paTc
h c
OrD
s a
ND
pLU
Gs
2005081-91-EN
Patch cords
Description
CAT 6A CCS RJ45-RJ45 shielded or unshielded patch cord.Certified by independent testing laboratories in accordance with Class EA requirements on the channel link at 500 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for 10 Gigabit Ethernet (IEEE 802.3an) applications.
Performance
Compliance Channel Class EA - GHMT technical report N.z2661a-11-E
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs with AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Insulation displacement according to IEC 60352-4; T568B wiring diagram
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color White cable RAL 9018Blue cap RAL 5015
Length Patch Cord CAT 6A U/UTP White Patch Cord CAT 6A F/UTP White1 mt 2005081 20050912 mt 2005082 20050923 mt 2005083 20050935 mt 2005084 2005094
2005081-91-EN
Patch cords
Description
CAT 6A CCS RJ45-RJ45 shielded or unshielded patch cord.Certified by independent testing laboratories in accordance with Class EA requirements on the channel link at 500 Mhz according to EIA/TIA 568-C.2 and ISO/IEC 11801.Ideal for 10 Gigabit Ethernet (IEEE 802.3an) applications.
Performance
Compliance Channel Class EA - GHMT technical report N.z2661a-11-E
Approvals ISO/IEC 11801:2011 (Ed. 2.2)EN 50173-1:2011ANSI/TIA-568-C.2
General characteristics
Material U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs with AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold
Connection Insulation displacement according to IEC 60352-4; T568B wiring diagram
Applications Permanent connections between active transmission equipments and patch panels; interconnections between panels
Packaging Every patch cord is individually packed
Color White cable RAL 9018Blue cap RAL 5015
Length Patch Cord CAT 6A U/UTP White Patch Cord CAT 6A F/UTP White1 mt 2005081 20050912 mt 2005082 20050923 mt 2005083 20050935 mt 2005084 2005094
17
Plugs
Patch cords and plugs2012001-02-EN Plug cat 6-EN
Category 5E
Description
CCS shielded or unshielded 8-pole plug to create patch cords.Characteristics meet and exceed CAT 5E - Class D requirements according to ISO/IEC 11801 and ANSI/TIA 568-B.2.
CharacteristicsMaterial Flame retardant thermoplastic material, with
metal shell only for the shielded version
Contacts 8 phosphor bronze contacts plated with 50 µm hard gold
Installation On cables with flexible conductors
Performance
Compliance Category 5E
Approvals ISO/IEC 11801:2011EN 50173-1:2011ANSI/TIA-568-C.2
Category 6
Description
CCS shielded or unshielded 8-pole plug with pre-insert used to create patch cords.Characteristics meet and exceed CAT 6 - Class E requirements according to ISO/IEC 11801 and ANSI/TIA 568-B.2.
CharacteristicsMaterial Flame retardant thermoplastic material, with
metal shell only for the shielded version
Contacts 8 phosphor bronze contacts plated with 50 µm hard gold
Installation On cables with flexible conductors
Performance
Compliance Category 6
Approvals ISO/IEC 11801:2011EN 50173-1:2011ANSI/TIA-568-C.2
Code DescriptionCAT 5 unshielded 8-pole RJ45 plug-UTP2012001CAT 5 shielded 8-pole RJ45 plug-STP2012002
Code DescriptionCAT 6 unshielded 8-pole RJ45 plug-UTP2012005CAT 6 shielded 8-pole RJ45 plug-STP2012006
18
Plugs
Patch cords and plugs
paTc
h c
OrD
s a
ND
pLU
Gs
2012003-EN
Easy Crimp CAT 5E
Description
CCS unshielded plug used to connect cables with solid conductors.With the tool-less Easy Crimp system, the connection is always fast and performing.Ideal for the realization of “transition point” or patch cords out of standard length. Characteristics meet and exceed CAT 5E - Class D requirements according to ISO/IEC 11801 and ANSI/TIA 568-B.2.
Performance
Compliance Category 5E - Class D
Approvals ISO/IEC 11801:2011EN 50173-1:2011ANSI/TIA-568-C.2
General Characteristics
Material Flame retardant thermoplastic material with high mechanical resistance; 8 phosphor bronze contacts plated with 50 µm hard gold
Connection IDC insulation displacement for solid copper conductors from 22 to 26 AWG; double labeling color scheme indicating the two T568A/B connections
Installation On cables with solid conductors
Code Description Packaging20 pcsCAT 5E UTP Easy Crimp plug cables with solid conductors2012003
19
Accessories
Patch cords and plugsBoots-EN 2040153-086-EN
Boots for RJ45 plugs
Description
Colored boots for protection against the flexion of terminations and useful for a perfect identification of the patch cord type.Available in different colors for a fast and easy identification of the cables.
Characteristics
Material High flex thermoplastic material
Diameter 6,5 mm
Color Blue, yellow, red, grey
Packaging 100 pcs
Crimping tools
Description
8-position crimping tools for RJ45 plug suitable for CAT 5E and CAT 6 cables.
Characteristics
Material Burnished steel body, ergonomic handles made of thermoplastic material
Application RJ45 plug crimping
Mechanism Spring pressure system
Color Body: blackHandles: red or black according to the model
Code DescriptionBoot for plug - Yellow2012014Boot for plug - Red2012013Boot for plug - Blue2012012Boot for plug - Grey2012011
Code Description8-position crimping tool for RJ45 plug20400868-position professional crimping tool for RJ45 plug2040153
20
Adapters
Work outlet2004026/97/32/3099EN 2004026/97/32/30b-EN
Adapters for RJ45 jacks-civil series
Description
Adapter for the installation of CCS RJ45 jacks on civil series frames.
Adapters for BTicino frames
Code Description2004026 Adapter - Magic series2004027 Adapter - Living series2004028 Adapter - Living International series2004029 Adapter - Living Light series2004034 Adapter - Living Light Tech series2004036 Adapter - Magic TT series (Ivory)2004037 Adapter - Matix series (White)2004057 Adapter - Axolute series (Anthracite)2004058 Adapter - Axolute series (Metal grey)2004081 Adapter - Axolute (White)
Adapters for Gewiss frames
Code Description2004032 Adapter - Playbus series2004033 Adapter - System series (White)2004038 Adapter - System series (Anthracite)2004077 Adapter - Chorus series (Black)2004078 Adapter - Chorus serie (Titanium)2004079 Adapter - Chorus (White)
Adapters for ABB frames
Code Description2004099 Adapter - Elos series (Black)2004093 Adapter - Chiara series
Adapters for Vimar frames
Code Description2004030 Adapter - Idea series (Anthracite)2004031 Adapter - Idea series (White)2004035 Adapter - Plana series (White)2004080 Adapter - Plana series (Silver)2004075 Adapter - Eikon series (Anthracite)2004076 Adapter - Eikon series (Metal grey)2004092 Adapter - Eikon series (White)
Adapters for Legrand frames
Code Description2004097 Adapter - Vela series (Black)2004098 Adapter - Vela series (White)
22
Faceplates
Work outlet2004012-13-14-EN 2003005-EN
503 type faceplates
Description
2, 3, 4-position 503 type self supporting faceplates compatible with Keystone standard for CAT 5E, 6, 6A CCS shielded and unshielded jacks.
General characteristics
Structure Flame retardant thermoplastic material with high mechanical resistance; identification label with clear plastic holder
Connection Compatible with 305 type Keystone standard
Installation On recessed box or wall
Color White
Blind insert
Description
Blind insert for faceplates codes 2004012/13/14 and for 16-port blank patch panel code 2002011 allowing the closure of unused ports.
General characteristics
Structure Flame retardant thermoplastic material with high mechanical resistance
Connection Snap-in
Installation On self-supporting faceplate or panel
Color White
Code DescriptionSelf-supporting CCS 503 type 2-position faceplate2004012Self-supporting CCS 503 type 3-position faceplate2004013Self-supporting CCS 503 type 4-position faceplate2004014
Code DescriptionBlind insert2003005
WO
rk
OU
TLeT
23
Faceplates and wall mount boxes
Work outlet
2004062 2004042
German type faceplate
Characteristics
Thermoplastic material, white color 2-position blank module for CCS Easy Crimp jacks 80x80 mm frame Label-holder window Installation on recessed box
French type faceplate
Characteristics
Thermoplastic material, white color 2-position blank module for CCS jacks compatible with
Keystone standard, 45x45 mm with sash window Label-holder window Installation on recessed box
1-position wall mount box
Characteristics
Thermoplastic material, white color 1 blank slot for CCS Keystone jacks Label-holder window Wall mount installation
2-position wall mount box
Characteristics
Thermoplastic material, white color 2 blank slots for CCS Keystone standard jacks Label-holder window Wall mount installation
2004043 2004044
Codice2004062Descrizione
Codice2004042Descrizione
Codice2004043Descrizione
Codice2004044Descrizione
Code 2004062 Description 2-position CCS German type self-supporting 80x80 faceplate
Code 2004042 Description 2-position CCS French type self-supporting faceplate
Code 2004043 Description 1-position outdoor blank wall mount box
Code 2004044 Description 2-position outdoor blank wall mount box
Code 2004062 Description 2-position CCS German type self-supporting 80x80 faceplate
Code 2004042 Description 2-position CCS French type self-supporting faceplate
Code 2004043 Description 1-position outdoor blank wall mount box
Code 2004044 Description 2-position outdoor blank wall mount box
Code 2004062 Description 2-position CCS German type self-supporting 80x80 faceplate
Code 2004042 Description 2-position CCS French type self-supporting faceplate
Code 2004043 Description 1-position outdoor blank wall mount box
Code 2004044 Description 2-position outdoor blank wall mount box
Code 2004062 Description 2-position CCS German type self-supporting 80x80 faceplate
Code 2004042 Description 2-position CCS French type self-supporting faceplate
Code 2004043 Description 1-position outdoor blank wall mount box
Code 2004044 Description 2-position outdoor blank wall mount box
2004062 2004042
German type faceplate
Characteristics
Thermoplastic material, white color 2-position blank module for CCS Easy Crimp jacks 80x80 mm frame Label-holder window Installation on recessed box
French type faceplate
Characteristics
Thermoplastic material, white color 2-position blank module for CCS jacks compatible with
Keystone standard, 45x45 mm with sash window Label-holder window Installation on recessed box
1-position wall mount box
Characteristics
Thermoplastic material, white color 1 blank slot for CCS Keystone jacks Label-holder window Wall mount installation
2-position wall mount box
Characteristics
Thermoplastic material, white color 2 blank slots for CCS Keystone standard jacks Label-holder window Wall mount installation
2004043 2004044
Codice2004062Descrizione
Codice2004042Descrizione
Codice2004043Descrizione
Codice2004044Descrizione
24