convergenc etp, llc ctp dsx driver · page 4 v2.5.7.6.8.9 pre‐install procedure: (licensed...
TRANSCRIPT
www.c2p
p.com
Convergenc
CTPInstalland
ceTP,LLC
PDSUseGuide,V
SXDVersion2.5.7.
Driv.6.8.9
ver
PPage0
www.c2p.com Page1 V2.5.7.6.8.9
DSX_OnSSI Integration Install and Use Guide
Preface: As part of the ConvergenceTP (CTP) family of Bridge products the CTP DSX Driver provides the interface between the OnSSI Ocularis CS platform, aswellasNetDVMSandRC‐Crecordingservers, and the DSX Access Control system. This interface between, or bridge, enables the DSX system to call in both live and recorded camera streams from theOnSSIvideomanagementsystemsmentionedabove.Individual camera streams, as well as multiple camera streams (up to 4) on a single camera view request, can easily be called into the DSX Access Control application using the standard camera interface component provided by the DSX application. The CTP DSX Driver meets the complete DSX camera interface specification including user support for PTZ preset selection.
Note1:.NetframeworkrequirementThe CTP DSX Driver require requires Microsoft .Net framework 4.0 on both the clients where the CTP DSX driver is loaded as well as the server running Ocularis Base.
Note2:CTPseedgeneratorprogramusedtolicensetheCTPDSXDriverBy default the CTP DSX Driver client program runs without any registration requirement needed but will expire in 30 days from first use and cannot be reloaded. In order to license the client for use after the 30 day period a seed generation program suppllied by CTP needs to be run on the Ocualris base server, or NetDVMS/RC‐C “Master” recording server, and the resultant seed then needs to be sent to CTP. Unpon receipt of the seed key CTP will then issue a CTPLicenseServer.lic file to be loaded in the root C:\ folder of the Ocularis, or NetDVMS/RC‐C server. Once the OnSSI video server is licensed the user is free to run as many copies of the CTP DSX Driver in their enterpise as they wish. If the install is for a NetDVMS or RC‐C recording server without Ocularis then the seed generator program must be run on the recording server designated as the Master in the master/slave chain. See also: Pre‐Install procedure: (licensed installs only, not needed for demos)
Note3:InstallfolderrequirementThe CTP DSX Driver.exe MUST be installed in the same directoy as the DSX application. Specifically the same folder as the the DSXDVR.exe file. Typically c:\WinDSX For more information about the CTP DSX Driver visit:
http://www.c2p.com/dsx.html
www.c2p.com Page2 V2.5.7.6.8.9
TableofContentsPreface: ......................................................................................................................................................... 1
Note1 : .Net framework requirement ....................................................................................................... 1
Note2: CTP seed generator program used to license the CTP DSX Driver ................................................ 1
Note3: Install folder requirement ............................................................................................................. 1
Software Install Procedure............................................................................................................................ 3
3 possible install scenarios ........................................................................................................................ 3
1) 30‐Day full featured demo install ................................................................................................. 3
2) 30‐Day full demo upgrade to licensed copy ................................................................................. 3
3) Licensed copy install ..................................................................................................................... 3
Pre‐Install procedure: (licensed installs only, not needed for demos) ........................................................ 4
Pre‐install seed key generation ................................................................................................................. 5
Figure 1 ..................................................................................................................................................... 5
CTP DSX Driver Install Wizard ....................................................................................................................... 6
Begin OnSSI SDK Install Process .................................................................................................................... 9
Final step for installer ................................................................................................................................. 10
Camera Setup in WinDSX ............................................................................................................................ 11
Single camera setup ................................................................................................................................ 12
Miltiple camera setup (up to 4) .............................................................................................................. 13
Pan Tilt Zoom (PTZ) preset ...................................................................................................................... 14
Commonissues: ....................................................................................................................................... 15
Appendix A: Sample DSX Camera configuration forms.............................................................................. 19
Appendix B: Cameras.cfg ............................................................................................................................ 20
Appendix C: Settings.cfg............................................................................................................................. 21
Sample setting.cfg file: Ocularis mode = default ................................................................................ 21
Sample settings.cfg file: NetDVMS or RC‐C mode ............................................................................. 21
Appendix D: Troubleshooting License Server issues .................................................................................. 22
Appendix E: output.log .............................................................................................................................. 23
Appendix F: CTP Driver revision number ................................................................................................... 24
Appendix G: Known Anomoly .................................................................................................................... 24
For more information about CTP DSX Driver visit: ..................................................................................... 25
About ConvergenceTP ................................................................................................................................ 25
www.c2p.com Page3 V2.5.7.6.8.9
SoftwareInstallProcedure
Install notes: The CTP DSX Driver needs to be installed on any DSX client requiring access to OnSSI camera streams The License Server is not needed for the 30-day demo. The License Server is only installed on the Ocularis Base server or NetDVMS/RC-C “Master”recording server.
3possibleinstallscenarios
1) 30‐Dayfullfeatureddemoinstall
Submit a request for the 30-day demo software using the form in the Download section of the ConvergenceTP (CTP) website:
http://www.c2p.com/dsx-download-contact-form.html Once the demo request is received, CTP will respond to the email address listed on the form with a link to the 30-day demo software to be downloaded. The 30-Day demo software is a full featured copy which is ready to be installed and run on as many DSX clients as needed provided the PC/Server that hosts the CTP DSX Driver meets the OnSSI Ocularis Client minimum requirements set by OnSSI. http://www.onssi.com/hardware‐recommendations Note: The CTP DSX Driver needs to be installed on any DSX client requiring access to OnSSI camera streams.
See also: CTP DSX Driver Install Wizard
2) 30‐Dayfulldemoupgradetolicensedcopy a) Purchase a licensed copy of the CTP DSX Driver. Email Sales@c2p for a quote. b) With the quote you will also receive the CTP Seed generator program to be run on the
Ocularis base server, or NetDVMS/RC-C “Master” recording server. See also: Pre-Install procedure: (licensed installs only, not needed for demos)
c) Cut-n-paste the resultant Seed key generated to the quote email and return it to CTP. d) You will then receive a ‘License Server Setup.exe’ file and a ‘CTPLicenseServer.lic’
file. e) Copy the CTPLicenseServer.lic to the C:\ root folder of the PC/server that the seed
generator was run on in step b above. f) Run the License Server Setup.exe install on the same PC/server used in step e.
Note1: The CTP License Server setup.exe can be run from any folder on that PC Note2: The CTP License Server setup.exe must be run as an administrator.
g) That’s it. Your demo software has just been upgraded to a licensed copy.
3) LicensedcopyinstallTo install a licensed copy of the CTP DSX Driver follow the same instructions as described in scenario 1 then 2 above.
www.c2p.com Page4 V2.5.7.6.8.9
Pre‐Installprocedure:(licensedinstallsonly,notneededfordemos) Note: If this install is for demo use only the Pre‐Install procedure is not needed. Once the 30‐day demo expires you will need to purchase a license to reactivate the software and the Pre‐install procedure will be needed at that time.
For Demo users proceed directly to: CTP DSX Driver Install Wizard Installing and running the ConvergenceTP seed Generator procedure:
1. Load the seed generator program (.zipp) that was emailed to you onto the Ocularis Base, or RC-C/NetDVMS master that will be hosting the CTP DSX Driver program. Note: The CTP DSX Driver supports both Ocularis Base connected cameras as well as supporting directly connected RC-C and NetDVMS systems in Master/Slave mode.
2. Rename the extension from zipp to .zip 3. Unzip the file. 4. Run CTP seed generator program by clicking on the Generate button.
(See Figure 1) 5. The program will calculate the seed value and place it in the window 6. Copy the calculated value from the Generate window and paste it into an email. Send the
seed value back to ConvergenceTP using the email address [email protected] 7. Once the seed value was received by ConvergenceTP, a license file will be emailed to
you that can enter when prompted the next time the CTP DSX drive is run. 8. Note: minimum requirements for the PC/Server should meet those set by OnSSI for the
OnSSI client
www.c2p
Pre‐ins Note: Not The Seed “Master”sDriver to Note: Onl Simply clisales@c2
p.com
stallseedk
t needed to ru
key is used toserver, along a fully license
ly one license
ck on the CTPp.com.
keygenera
un the 30‐day
o create a licewith the CTPed copy.
server per lic
P Generator ic
ation
y demo softwa
ense file whicP License Serv
censed DSX in
con then cut
Figure
Page5
are.
ch when loadever module, c
stallation is n
and paste the
e1
ed on the Oconverts a 30‐
needed.
e resultant se
ularis Base or‐day demo co
eed key and e
V2.5.7
r NetDVMS/Ropy of the CTP
email it back t
7.6.8.9
RC‐C P DSX
to
www.c2p
CTPD Place thisexecute tNote: Thestreams. The CTP
p.com
DSXDrive
s CTP DSX Dthe installere CTP DSX D
application
erInstal
river x.x.x.ex.
Driver must b
is installed f
llWizard
xe executab
be installed o
irst and then
Page6
d
le that was e
on all DSX cli
n the OnSSI
emailed to y
ients expecti
SDK is instal
you in the W
ing to view O
lled
V2.5.7
WinDSX folde
OnSSI camer
7.6.8.9
r and
ra
www.c2p
Note the
The CTP the same
p.com
install directo
DSX Driver Me folder as th
ory below.
MUST be inshe the DSXD
talled in theVR.exe file.
Page7
e same direcTypically c:\
toy as the D\WinDSX\
DSX applicati
V2.5.7
on. Specifica
7.6.8.9
ally
www.c2p
p.com
Page8
V2.5.77.6.8.9
www.c2p
BeginNote if a premove it
p.com
OnSSISprevious verst prior to insta
DKInstasion of the Onalling the the
allProcenSSI SDK is deversion of th
Page9
essetected the inhe SDK include
stall will promed with the C
mpt you for pCTP DSX Drive
V2.5.7
permission toer.
7.6.8.9
www.c2p
FinalsAfter the For detail
p.com
stepforinstaller finiss on setting.c
installerhes edit the scfg see Appen
rsettings.cfg findix C: Settin
Page10
le located in tgs.cfg
the folder us
ed for this ins
V2.5.7
stall.
7.6.8.9
www.c2p
Camer Note: Thisdetail on s
Selecting
p.com
raSetup
s DSX camerasetting up cam
g the camera
pinWinD
a setup matermeras from w
a to configur
DSX
rial below is fowithin the DSX
re
Page11
or reference oX application.
only. See DSX.
X documentat
V2.5.7
tion for more
7.6.8.9
www.c2p
S Note1: DSNote2: Th
p.com
inglecam
SX limits the the DVR Server
erasetup
total number r Name is spe
of charactersecified as an I
Page12
s in the “AssigP adr in Appe
gn Cameras” endix C: Setti
dialog to appings.cfg
V2.5.7
prox. 45.
7.6.8.9
www.c2p
Miltiple Note DSX Note2: Th
p.com
ecameras
limits the tothe DVR Server
setup(upt
tal number ofr Name is spe
to4)
f characters iecified as an I
Page13
n the “AssignP adr in Appe
n Cameras” diendix C: Setti
ialog to approings.cfg
V2.5.7
ox. 45.
7.6.8.9
www.c2p
PanTil Note the fchecked.
SuggestFor best psubstantia
p.com
tZoom(P
first camera i
tion: performance al Ocularis Lo
TZ)prese
in the Assign
leave the CTPogin delay tim
t
Cameras list
P Client up anme to reopen a
Page14
will be set to
nd just minima connection
“Preset 1” if
ize it after vieto Ocularis
the PTZ Cam
ewing a came
V2.5.7
mera check bo
era. This save
7.6.8.9
ox is
s the
www.c2p
Comm Aside fromresult of w Issue: DSXDVR.eapplicatio ResolutioDVR.exe ilocated. During thdirectory In the screoccurs it n
p.com
monissue
m the wrong wrong or miss
exe crashes oon.
on: n not installe
e initial instalcontaining theen shot beloneeds to be re
es:
path being ussing data ente
r nothing hap
ed or was inst
ll of the “CTP he DSXDVR.exow you can seemoved so th
sed during thered in the D
ppens at all w
alled into a d
DSX Driver” xe program. ee that the inhat the correc
Page15
e installationSX camera co
when you try t
directory othe
make sure th
staller insertect path for th
n of the CTP Donfiguration f
to view a cam
er than the di
he installer is
ed a “New Foe install can b
DSX Driver moform.
mera stream w
rectory wher
pointing the
older” in the ibe used.
V2.5.7
ost issues are
within the DSX
re DSXDVR.ex
correct DSX
nstall path. If
7.6.8.9
a
X
xe is
f this
www.c2p
Issue: CTP Clien Entering the “LoggSee also:
Note: If the wrooutput.log
p.com
nt stops at th
a wrong Ocging in pleas: Appendix C
ong credentialg. Cameras.cf
he “Logging
cularis Base se wait…” sC: Settings.c
ls are used in fg and output
in, please w
IP adr in setscreen cfg
the DSX camt.log will not b
Page16
wait…” messa
ttings.cfg file
mera form no ebe updated u
age
e will result
entries will beuntil a valid lo
in the CTP c
e made to camogin process c
V2.5.7
client to sto
meras.cfg ancompletes.
7.6.8.9
p at
d
www.c2p
Issue: Screen st
Entering the” Una
Check thFor more See also:
p.com
tops at the “
the wrong uable to log in
e cameras.ce details on t
Appendix A
“Unable to lo
username orn” screen.
fg file to seethe cameras
A: Sample DS
og in” screen
r wrong pass
e the last ress.cfg file see:
SX Camera c
Page17
n.
sword in the
sult of the la: Appendix B
configuration
e DSX camer
ast login atteB: Cameras.c
n forms.
a configurat
empt. cfg
V2.5.7
tion form giv
7.6.8.9
ves
www.c2p
Issue: Adding a Adding a cwait” scre Note: Cam
Hint: Wheand cut‐nSee Appen
p.com
camera to th
camera in theeen being disp
mera names u
en troublesho‐paste the candix B: Camer
he DSX form r
e DSX cameraplayed briefly
used in the D
ooting suspecamera name inras.cfg
results in a bl
a configuationy and then a b
DSX camera fo
ted camera nn question dir
Page18
lank screen w
n form that dblack CTP clie
orm are case
name syntax orectly to the D
when viewed
oesn’t exist rent screen as
sensitive. Ex
or spelling issDSX camera f
.
results in the seen below.
xample: Cam
sues open theform.
V2.5.7
”logging in pl
era1 ≠ camer
e cameras.cfg
7.6.8.9
lease
ra 1
file
www.c2p
Appen Note for mdocument
Ocularis loNote1: Dsee Appen
p.com
ndixA:S
more informatation.
ogin credentiVR Server Nandix C: Settin
SampleD
ation on the D
als used me and port ngs.cfg
DSXCam
DSX camera fo
are not neede
Page19
meracon
orm please ref
ed here. They
nfiguratio
efer to the app
y are specified
onform
propriate Win
d in settings.c
V2.5.7
s.
nDSX
cfg
7.6.8.9
www.c2p
Appen
As part ocredentiacameras Note: Ca Importan
Tca
In the ex
1234
Note: Camattempt. For exampwill not be
p.com
ndixB:C
of the login pals used. Thare listed in
ameras.cfg is
nt troubleshoTo avoid mistameras.cfg d
ample below) Lab entry) CTP C1 ) Lab entry) Lab entry
meras.cfg is aThe keyword ple: If the usee updated be
Cameras
process OnSis list can beXML forma
s only genera
ooting tip: typing camerdirectly into
w there are 4y C19
y C17 y C18
report file ofhere is succeer enters the wcause the log
.cfg
SI provides e found in that. ated if there
ra names yothe DSX cam
cameras list
f the camerasssful. wrong login cgin attempt fa
Page20
the camerashe WinDSX d
is a successf
ou can cut-n-mera form.
ted:
s listed by OnS
credentials in ailed. See belo
s that are avadirectory in
sful login.
-paste the ca
SSI based on
the DSX camow
ailable basedthe Cameras
amera names
the last SUCC
era form the
V2.5.7
d on the logins.cfg file. Th
s from the
CESSFUL login
cameras.cfg f
7.6.8.9
n he
n
file
www.c2p
Appen The settinuser to seThe CTP DTo run thea “Setting As shippe
Samples useNDVM Ocularis B Ocularis B To run thein the Win
Samples useNDVM NetDVMS NetDVMS
p.com
ndixC:S
ngs.cfg file is fet the IP addreDSX Driver shie CTP DSX Drgs.txt” file in t
d the Setting
setting.cfgfi
MS = 0
Base IP adr
Base Port
e CTP DSX drinDSX folder u
settings.cfgf
MS = 1
S Master IP ad
S Master Port
Settings.
found in the sess of the Ocips in Ocularisiver in NetDVthe WinDSX fo
s.txt file look
ile:Ocularis
iver in RC‐C ousing notepad
file:NetDVM
dr
cfg
same folder wularis base ors Mode. VMS or RC‐C older on each
s as follows:
smode=def
r NetDVMS md and save the
MSorRC‐Cm
Page21
where WinDSr NetDVMS/R
master/slaveh DSX client.
(Ocularis Mod
fault
mode simply ae file.
mode
SK resides. ThRC‐C master r
e mode you ne
de by default
add the follow
e settings.cfgecording serv
eed to make
t)
wing line to t
V2.5.7
g folder allowver.
a modificatio
he setting.cfg
7.6.8.9
ws the
on to
g file
www.c2p
Appen Note: the The CTP D
OW
The LicenPC/ServerServer Seinstalled. The best wtask mana If the CTP
Key playe
1)2)3)4)5)
6) Possible p
1) Lise
p.com
ndixD:T
e License Serv
DSX Driver liceOn Ocularis, thWith NetDVMS
se Server mur that will be rvice it first c
way to check ager. It should
P License Serv
rs in the licen
) Windows T) LincenseSe) Firewalls a) Output.log) Ensure the
run on to c) Ensure the
problems:
icenseServer erver” in the
a. Check b. Check
ports 9c. If all e
Troubles
ver ONLY app
ense is lockedhe CTP LicensS or RC‐C the
st be installehosting it. Thhecks the .lic
if the Licensed be listed as
vice isn’t runn
nsing scheme
Task manageerver.Lic in inare down g in the WinDe License Servcreate the .lice License Serv
service is notOutput.log filthe LicenseSthat firewalls9993 and 123lse fails go toThen ensurServer
shooting
lies to license
d to the heade server goes CTP License
d AFTER the is is becausefile in the C:
e server is ins “running”.
ning then you
r to verify the the C: dir
DSK folder indver and .lic arc file ver and .lic ar
t running, indle or by viewierver.lic file is are down be345 (see Appe Start>All Prore the License
Page22
gLicense
ed copies of t
end of the res on the OculaServer goes o
LicenseServebefore the Lidir. If it isn’t
stalled proper
r trouble sho
e License Serv
icates last licee installed on
e on the Hea
icated by theing the servics in the C: foletween the Dendix C: Settiograms>CTP LeServer.lic file
eServer
the CTP DSX D
ecording servaris Base servon the “Maste
r.lic file is plaicense Serverthere or not v
rly is to look a
oting begins
ver Service is
ense failuren the same se
d end record
e message “ Uce status in Wlder on the coDSX client andings.cfg for deLicense Servee is in the C: f
rissues
Driver
ver chain. ver er” recording
aced in the C: r Installer Instvalid the serv
at “Services”
here.
running
erver the Seed
ing server.
Unable to conWindows Task orrect server.d the LicenseSetails) r>Uninstall folder and rei
V2.5.7
g server
dir of the talls the Licenvice is not
in the Windo
d generator w
ntact license Manager. . Server especi
nstall the Lice
7.6.8.9
nse
ows
was
ally
ense
www.c2p
AppenOutput.lo The outpu Licensing
1) 302) Th
Invalid lic
Output.lo
If
If
p.com
ndixE:oog is updated
ut.log file is lo
errors occur
0‐day demo lhe CTP Licens
ense screen
og reports the
wrong IP adrthen o
the license s
output.loany time a lic
ocated in the
for 2 reasons
icense expirese Server is ei
e status of the
r for license soutput.log can
The CTP clie
erver is runni
ogcensing error
WinDSX folde
s:
es ither not runn
e license proc
erver is used n take SEVERAent screen ju
ing then you
Page23
occurs after
er on the DSX
ning or not ac
cess. (only cre
or license seAL seconds tost says: “Plea
get the mess
the demo lice
X client being
ccessible by t
eated after de
rver is not ruo update withase Log in” as
age below:
ense period e
g used.
the DSX client
emo license e
nning h message beshown above
V2.5.7
expires.
t
expires)
elow e
7.6.8.9
www.c2p
Appen
Double cl
The revisi
Appen Clicking oThe only
p.com
ndixF:C
ick CTP Video
on is displaye
ndixG:K
on a video dway to resta
CTPDriv
o Browser.exe
ed in the upp
KnownA
uring playbaart playback
verrevis
e in the WinD
er left corner
Anomoly
ack stops thek is to resubm
Page24
ionnum
DSX folder to g
r
y
e playback. mit the came
mber
get the rev le
era request
evel of the DS
in the DSX a
V2.5.7
X integration
app.
7.6.8.9
.
www.c2p
Formhttp://
About
Converg(ESE™) user de
Contact250 StaNorth HPhone 8www.c2
p.com
oreinfo/www.c2p
tConverg
genceTP, Lwhich is tfined infor
t Informatte Street, UHaven, CT 0800‐252‐682p.com
rmationp.com/ds
genceTP
LLC has dehe backbormation to
ion: Unit G‐1 06473 USA840 x402 s
naboutCsx.html
P
eveloped tone for all be seamle
A sales
Page25
CTPDSX
the patentof the ESessly integ
Driverv
t pending E™ softwarated into
visit:
Event Streare applicathe video
V2.5.7
eaming Enations allowdisplay.
7.6.8.9
ngine wing