continuous geared hinges - ngp c phone 800-647-7874 ordersngpinc.com fax 800-255-7874...
TRANSCRIPT
ANSI/BHMAThe following explains ANSI/BHMA numbers which identify material and type of products. Look for the BHMA certified logo next to the product in our catalog. For a complete listing refer to the BHMA Certified Products Directory online at www.buildershardware.com
CH 1
HD1100 . . . . . . CH2HD1400 . . . . . . CH4HD1800 . . . . . . CH3HD2100 . . . . . . CH9HD2400 . . . . . . CH5HD2700 . . . . . . CH6
Numerical Index: Fasteners:
continuous
GEARED HingeS
HD4100 . . . . . . CH7HD4200 . . . . . CH12HD5300 . . . . . CH10HD5400 . . . . . CH11HD5700 . . . . . . CH8
Rating Symbols Legend
10CPOSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C; complies with IBC, NFPA 80 and NFPA 252 for application to Hollow Metal and Wood fire doors rated up to to 90 minutes. See individual products for maximum door size.
ANSI/BHMA CERTIFIED. Certified hinges comply with American National Standard for Continuous Hinges ANSI/BHMA A156.26 and are listed in the BHMA Certified Products Directory.
ANSI/BHMA A156.26 American National Standard for Continuous Hinges
1 2 3 4 5 6 7 Product Product Electrical Door Hinge Section Material Type Modifications Weight (lbs.) Grade Type
"A" 1. Brass Bronze 1. Edge Mounted 0. None 1. 150 1. Grade 1 B. Barrel designates 3. Aluminum 2. Half Edge Mounted 1. Concealed Wire Transfer 2. 300 2. Grade 2 G. Geared Hinges 5. Stainless Steel 3. Full Surface 2. Monitor 3. 600 3. Grade 3 8. Steel 4. Half Surface 3. Power Transfer 4. 1200 5. Swing Clear 4. Other 6. Raised Barrel 7. Wide Throw 0. Other
LEED Green Building The LEED (Leadership in Energy and Environmental Design) Green Building Rating System® is a national standard for developing high-performance, sustainable buildings developed by the U. S. Green Building Council. Our current LEED letter containing LEED qualification information for all our products is available at www.ngp.com
Environmental Product Declarations (EPD) prepared and certified by an Independent Laboratory based on Life Cycle Assessments (LCA) of our products and Health Product Declarations (HPD) may be viewed on our website, www.ngp.com
National Guard Products sustainability report may be viewed on our website, www.ngp.com
Contact us regarding our end of use product recycling program.
Buy American RequirementsOver 99% of our products are produced in the United States as a domestic construction material, as defined in the Buy American Act (BAA) of March 1933 and amended by the Buy American Act of 1988 and FAR 52.225-9. A Buy American certificate may be obtained on our website, www.ngp.com
#12 x 11/16" FH U/C TEK MS
#12 x 1-1/2" Wood Screw
#12 x 3/4" PH TEK MS
1/4"-20 Thru-Bolt
Phillips Head
Torx Head (optional)
FH = Flat HeadPH = Pan HeadU/C = Undercut
CH 2
HD1100HD1100-LLConcealed Continuous Geared Hinge No Door Inset, Flush Mount for 1-3/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally hydrophobic
graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy, extremely high
frequency or extra wide doors• Lifetime of the door opening warranty• #12-24 TEK MS• “LL” model for doors up to 1,000 lbs. features lead-lined dual row hole pattern• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK screws• Cut to net length• Anti-ligature hospital tip - specify “ALHT”• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 8'0" and steel stiffened doors up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
3/4
11/16"
1-9/16"
alignmentflangebothleafs
NATIONAL GUARD PRODUCTS, INC. Phone 800-647-7874 [email protected] www.ngp.com Fax 800-255-7874 [email protected]
CH 3
HD1800HD1800-LLConcealed Continuous Geared Hinge 1/8" Door Inset, for 1-3/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally hydrophobic
graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy, extremely high
frequency or extra wide doors• Lifetime of the door opening warranty• #12-24 TEK MS• “LL” model for doors up to 1,000 lbs. features lead-lined dual row hole pattern• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK screws• Cut to net length - specify door handing• Anti-ligature hospital tip - specify “ALHT” and door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 8'0" and steel stiffened doors up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
3/4
11/16"
1-15/16"
alignmentflangebothleafs
1-9/16"
1/8"doorinset
Frame leaf covers butt hinge preps
CH 4
HD1400HD1400-LLConcealed Continuous Geared Hinge 1/16" Door Inset, for 1-3/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally hydrophobic
graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy, extremely high
frequency or extra wide doors• Lifetime of the door opening warranty• #12-24 TEK MS• “LL” model for doors up to 1,000 lbs. features lead-lined dual row hole pattern• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK screws• Cut to net length - specify door handing• Anti-ligature hospital tip - specify “ALHT” and door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 8'0" and steel stiffened doors up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Narrow frame leaf allows NGP 2525 bulb seal
3/4
11/16"
1-9/16"
alignmentflange 1/16"
doorinset
door leaf lip
NATIONAL GUARD PRODUCTS, INC. Phone 800-647-7874 [email protected] www.ngp.com Fax 800-255-7874 [email protected]
CH 5
HD2400HD2400-LLConcealed Continuous Geared Hinge 1/16" Door Inset, for 1-3/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally hydrophobic
graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy, extremely high
frequency or extra wide doors• Lifetime of the door opening warranty• #12-24 TEK MS• “LL” model for doors up to 1,000 lbs. features lead-lined dual row hole pattern• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK screws• Cut to net length - specify door handing• Anti-ligature hospital tip - specify “ALHT” and door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 8'0" and steel stiffened doors up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Frame leaf covers butt hinge preps
3/4
11/16"
1-15/16"
alignmentflange 1/16"
doorinset
door leaf lip
CH 6
HD2700HD2700-LLConcealed Continuous Geared Hinge No Door Inset, Flush Mount for 2" to 2-1/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally hydrophobic
graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy, extremely high
frequency or extra wide doors• Lifetime of the door opening warranty• #12-24 TEK MS• “LL” model for doors up to 1,000 lbs. features lead-lined dual row hole pattern• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK screws• Cut to net length• Anti-ligature hospital tip - specify “ALHT”• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 8'0" and steel stiffened doors up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Frame leaf covers butt hinge preps
3/4
11/16"
1-15/16"
alignmentflangebothleafs
NATIONAL GUARD PRODUCTS, INC. Phone 800-647-7874 [email protected] www.ngp.com Fax 800-255-7874 [email protected]
CH 7
HD4100HD4100-LLConcealed Swing-Clear Continuous Geared Hinge 1/16" Door Inset for 1-3/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally
hydrophobic graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy,
extremely high frequency or extra wide doors• Lifetime of the door opening warranty• #12-24 TEK MS• “LL” model for doors up to 1,000 lbs. features lead-lined dual row
hole pattern• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK screws• Cut to net length - specify door handing• Anti-ligature hospital tip - specify “ALHT” and door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 8'0" and steel stiffened doors up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Frame leaf covers butt hinge preps
3/4
7/8"
door leaf lip
1-16"doorinset
1-15/16"
CH 8
HD5700Full Surface Continuous Geared Hinge 1/16" Door Inset for 1-3/4" to 2-1/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a
naturally hydrophobic graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy,
extremely high frequency or extra wide doors• Lifetime of the door opening warranty• Frame leaf: #12-24 TEK flat head MS• Door leaf: #12-24 TEK pan head MS and 1/4"-20 thru-bolts• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK & T.B. M.S.• Cut to net length - specify door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Concealed fastener covers on both leafs
11/16"
NATIONAL GUARD PRODUCTS, INC. Phone 800-647-7874 [email protected] www.ngp.com Fax 800-255-7874 [email protected]
CH 9
HD2100Full Surface Swing Clear Continuous Geared Hinge 1/32" Door Inset for 1-3/4" to 2-1/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a
naturally hydrophobic graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy,
extremely high frequency or extra wide doors• Lifetime of the door opening warranty• Frame leaf: #12-24 TEK flat head MS• Door leaf: #12-24 TEK pan head MS and 1/4"-20 thru-bolts• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK & T.B. M.S.• Cut to net length - specify door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Concealed fastener cover on door leaf
7/8"
CH 10
HD5300Half Surface Continuous Geared Hinge 3/32" Door Inset for 1-3/4" to 2-1/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally
hydrophobic graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy,
extremely high frequency or extra wide doors• Lifetime of the door opening warranty• Frame leaf: #12-24 TEK flat head MS• Door leaf: #12-24 TEK pan head MS and 1/4"-20 thru-bolts• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK & T.B. M.S.• Cut to net length - specify door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Narrow frame leaf allows NGP 2525 bulb seal Concealed fastener cover on door leaf
alignmentflange
11/16"
1-9/16"
NATIONAL GUARD PRODUCTS, INC. Phone 800-647-7874 [email protected] www.ngp.com Fax 800-255-7874 [email protected]
CH 11
HD5400Half Surface Continuous Geared Hinge 3/32" Door Inset for 1-3/4" to 2-1/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally
hydrophobic graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy,
extremely high frequency or extra wide doors• Lifetime of the door opening warranty• Frame leaf: #12-24 TEK flat head MS• Door leaf: #12-24 TEK pan head MS and 1/4"-20 thru-bolts• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK & T.B. M.S.• Cut to net length - specify door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Frame leaf covers butt hinge prepsConcealed fastener cover on door leaf
alignmentflange
11/16"
1-15/16"
CH 12
HD4200Half Surface Swing Clear Continuous Geared Hinge 1/32" Door Inset for 1-3/4" to 2-1/4" DoorsContinuous geared aluminum hinges run the full height of the door evenly distributing the weight of the door along the full height of the frame. Ideal for high frequency and heavy weight doors in new construction and retrofit applications.
• Aluminum alloy 6063-T6; Anodized after machining• Specially designed involute intermeshing gears• Wear surfaces are lifetime anti-friction lubricated with a naturally
hydrophobic graphite that doesn't attract dust or dirt• Proprietary teflon infused self-lubricating wear resistant bearings• No hinge reinforcement necessary except on extremely heavy,
extremely high frequency or extra wide doors• Lifetime of the door opening warranty• Frame leaf: #12-24 TEK flat head MS• Door leaf: #12-24 TEK pan head MS and 1/4"-20 thru-bolts• Standard lengths: 83", 85", 95", 119"
Available Options:• #12 x 1-1/2" wood screws• Torx security TEK & T.B. M.S.• Cut to net length - specify door handing• Dutch door prep - specify door handing, top door leaf length,
and clearance between leafs
Finishes:A - anodized aluminumDKB - dark bronze anodized
10C Fire-rated 90 minute on hollow metal (except steel stiffened) or wood door leafs up to 4'0" x 7'2".
ANSI/BHMA certified to A156.26 American National Standard for Continuous Hinges:Grade 1 - 150 lb. doorGrade 2 - 300 lb. doorGrade 1 - 600 lb. door
Frame leaf covers butt hinge prepsConcealed fastener cover on door leaf
7/8"
1-15/16"