construction plastics task force review steven yu nov 8th, 2011 psdc meeting at beijing

10
Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Upload: jared-webster

Post on 16-Jan-2016

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Construction Plastics Task ForceReview

Steven Yu

Nov 8th, 2011PSDC meeting at Beijing

Page 2: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Taskforce Report: Construction Plastics

2009/09/25, Ministry of Public Security (MOPS), Ministry of Housing and Urban-Rural Development (MOHURD) jointly promulgated the Notice [2009] 46, that requires in general

-burning behavior of thermal insulation at external wall of civil buildings can not be below class B2, and class A is recommended as appropriate

2011/3/14, Ministry of Public Security issued new Notice [2011] 65 and required burning behavior to class A which is over stringent for plastics. The Notice 65 was not jointly signed by MOHURD whom has different opinion from Energy Saving aspect.

‘Political’ discussion on plastics used for thermal insulation at external wall of civil buildings

Page 3: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Taskforce Report: Construction Plastics

AICM Building Materials and Fire Retarding Standards Workshop

2011/08/18Dujiang Yan City, Chengdu

Stakeholders: Sichuan Fire Research Institute, AICM, China PU Industry

Association, CPPIA EPS

Page 4: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Construction Plastics

Updates

“GB 8624 & GB 20286: “Requirements and mark on burning behavior of fire retarding products in public place” & “Classification for burning behavior of building materials and products”; both of them are submitted to MPS for approval;

“GB 50045-2005 & GB 50016-2006”: “Code for fire protection design of tall buildings” and “Code of Design on Building Fire Protection and Prevention”, is considering to be combined and revised by MPS

Work Plan

Follow up regulatory development from Ministry of Public Security and MOHURD;

Plan to organize workshop with TianJin Fire Control Research Institute, to support Plastic application for external wall insulation

Page 5: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Thank You!

Page 6: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Taskforce Report: Construction Plastics

Fire Safety Issue:

GB 20286(revision): Requirements and mark on burning behavior of fire retarding products in public place &GB 8624 (revision): Classification for burning behavior of building materials and products

Revisions have been completed by Sichuan Fire-Research Institute (SCFRI)

Revision has been submitted and wait for final approval from Ministry of Public Security

Page 7: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Introduction of GB 8624 Introduction of GB 8624

GB 8624 refers to EN 13501-1: 2007

GB 8624 applies to construction materials and decoration, that includes ceiling, flooring, thermal insulation material etc.

GB 8624 defines the classification of burning behavior, test methods and technical specification for different kinds of construction materials in chapter 5.1, & 5.2.

Classification of burning

behavior in GB 8624

Description of products

A (A1, A2) Non-flammable products

B1 Fire resistant products B2 Flammable products

B3 Inflammable products

Classification in EN 13501-1

A1, A2

B, C

D, E

F

Page 8: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Taskforce Report: Construction Plastics

Fire Safety Issue:

GB50045-2005: Code for fire protection design of tall buildings ( 高层民用建筑设计防火规范 ) It regulates buildings over 24m. It was prepared by SCFRI in past.

GB50016—2006 Code of Design on Building Fire Protection and Prevention ( 建筑设计防火规范 )It was prepared by Tianjin Fire Research Institute in past.

Both standards will be revised by SCFRI or Tianjin Fire Research Institute as expected.

Page 9: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Taskforce Report: Construction Plastics

Fire Safety Issue:

JGJ 144-2008: Technical specification for external thermal insulation on walls ( 外墙外保温工程技术规范)This industry standard was prepared by Center of Science and Technology of Construction, MOHURD( 建设部科技发展促进中心)

Requirement of burning behaviorsEPS, XPS: above Class E (B2) according to test of GB8624PU: above Class E (B2) according to test of GB8624

Page 10: Construction Plastics Task Force Review Steven Yu Nov 8th, 2011 PSDC meeting at Beijing

Taskforce Report: Construction Plastics

Additionally, some other events are ongoing from other stakeholders related to fire safety topic in China

Seminar on Policy of Thermal Insulation on Walls, Sustainable

Development, Technology of Energy Saving and Fire Safety Discussion

Aug. 19-21, 2011 at Qingdao

Organizer: Center of Science and Technology of Construction, MOHURD

( 建设部科技发展促进中心)

China Fire Safety& Sustainable Environment

Summit 2011

August 20th -21st , 2011 at Shanghai

Organizer: agency Copexglobal