consolidates ansi/isea 107-2010 ansi/isea 207-2011 ... · ansi/isea 107-2015 standard, ... the...

2
Type O Off-Road Use (Class 1 only) Provides added visibility to workers who are not exposed to traffic. Type R Roadway Use (Class 2 & Class 3) Enhanced visibility for workers who are exposed to traffic and working against complex backgrounds. Type P Public Safety (Class 2 & Class 3) Enhanced visibility for emergency and incident responders and law enforcement personnel in both roadway and off-road environments. The merge of the ANSI/ISEA 107 (roadway) and ANSI/ISEA 207 (public safety) standards, created the need for garment type classification based on the work environment and the level of protection needed. New Categorization UPDATED ANSI/ISEA 107-2015 HIGH-VISIBILITY SAFETY APPAREL & ACCESSORIES With the new “TYPE” categorization introduced with the ANSI/ISEA 107-2015 standard, new tags will be required. Each tag will now need to show the Type and Class, as well as be specific on whether or not it’s Flame Resistant (FR), including tested capability. All garments that are not tested to or do not pass approved FR test methods must state this clearly on the tag. New Garment Tag Requirements BRINGING THE BEST OF THE WORLD TO YOU® 302-MVZPLY LARGE ANSI 107-2010 CLASS 2 LEVEL 2 2 2 BRINGING THE BEST OF THE WORLD TO YOU® 302-MVZPLY LARGE ANSI 107-2015 This garment is not flame resistant as defined by ANSI/ISEA 107-2015 Section 10.5 TYPE R CLASS 2 NOT FR BRINGING THE BEST OF THE WORLD TO YOU® 305-2100LY LARGE ANSI 107-2015 TYPE R CLASS 2 FR: ASTM F-1506 ARC RATING: 5.1 cal/cm2 ATPV The American National Standards Institute (ANSI) has approved a new edition of the ANSI/ISEA 107-2015 standard. This standard consolidates the ANSI/ISEA 107-2010 standard for High- Visibility Safety Apparel (HVSA) and the ANSI/ISEA 207-2011 American National Standard for High-Visibility Public Safety Vests into a single comprehensive standard going forward. The smallest size allowable under the ANSI/ISEA 107 – 2010 standard was generally considered too big for workers requesting a size smaller than medium. This requirement changed significantly, and the new ANSI/a 107-2015 standard now allows for a truer size small to be achieved. Smaller Sizing Will Be Available MEDIUM SMALL 120cm 114cm 29cm 30cm 69cm 71cm MEDIUM SMALL 120cm 114cm 29cm 30cm 69cm 71cm 26cm 27cm Class 3 Smallest size offered decreases from 1240 sq. in. to 1000 sq. in. Class 2 Smallest size offered decreases from 775 sq. in. to 540 sq. in. Old (ANSI 107-2010) New (ANSI 107-2015)

Upload: vantuong

Post on 21-Jun-2018

268 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: consolidates ANSI/ISEA 107-2010 ANSI/ISEA 207-2011 ... · ANSI/ISEA 107-2015 standard, ... The American National Standards Institute (ANSI) ... COLOR Hi-Vis Lime Yellow or Hi-Vis

BREAKAWAYNON-ANSI

BREAKAWAYNON-ANSI

Type O Off-Road Use (Class 1 only) Provides added visibility to workers who are not exposed to traffic.

Type R Roadway Use (Class 2 & Class 3) Enhanced visibility for workers who are exposed to traffic and working against complex backgrounds.

Type P Public Safety (Class 2 & Class 3) Enhanced visibility for emergency and incident responders and law enforcement personnel in both roadway and off-road environments.

The merge of the ANSI/ISEA 107 (roadway) and ANSI/ISEA 207 (public safety) standards, created the need for garment type classification based on the work environment and the level of protection needed.

New Categorization

UPDATED ANSI/ISEA 107-2015HIGH-VISIBILITY SAFETY APPAREL & ACCESSORIES

With the new “TYPE” categorization introduced with the ANSI/ISEA 107-2015 standard, new tags will be required. Each tag will now need to show the Type and Class, as well as be specific on whether or not it’s Flame Resistant (FR), including tested capability. All garments that are not tested to or do not pass approved FR test methods must state this clearly on the tag.

New Garment Tag RequirementsBRINGING THE BEST OF THE WORLD TO YOU®

302-MVZPLYLARGE

ANSI 107-2010

CLASS 2 LEVEL 2

2

2

BRINGING THE BEST OF THE WORLD TO YOU®

302-MVZPLYLARGE

ANSI 107-2015

This garment is not flame resistant as defined by ANSI/ISEA 107-2015

Section 10.5

TYPE R

CLASS 2

NOT FR

BRINGING THE BEST OF THE WORLD TO YOU®

305-2100LYLARGE

ANSI 107-2015TYPE R

CLASS 2

FR: ASTM F-1506

ARC RATING: 5.1 cal/cm2 ATPV

BRINGING THE BEST OF THE WORLD TO YOU®

302-MVZPLYLARGE

ANSI 107-2010

CLASS 2 LEVEL 2

2

2

BRINGING THE BEST OF THE WORLD TO YOU®

302-MVZPLYLARGE

ANSI 107-2015

This garment is not flame resistant as defined by ANSI/ISEA 107-2015

Section 10.5

TYPE R

CLASS 2

NOT FR

BRINGING THE BEST OF THE WORLD TO YOU®

305-2100LYLARGE

ANSI 107-2015TYPE R

CLASS 2

FR: ASTM F-1506

ARC RATING: 5.1 cal/cm2 ATPV

BRINGING THE BEST OF THE WORLD TO YOU®

302-MVZPLYLARGE

ANSI 107-2010

CLASS 2 LEVEL 2

2

2

BRINGING THE BEST OF THE WORLD TO YOU®

302-MVZPLYLARGE

ANSI 107-2015

This garment is not flame resistant as defined by ANSI/ISEA 107-2015

Section 10.5

TYPE R

CLASS 2

NOT FR

BRINGING THE BEST OF THE WORLD TO YOU®

305-2100LYLARGE

ANSI 107-2015TYPE R

CLASS 2

FR: ASTM F-1506

ARC RATING: 5.1 cal/cm2 ATPV

NEW TAGS To insure that there is no confusion as to what is defined as tested for FR, the new standard will require that all garments that are not tested to or do not pass approved

test methods include the statement on the bottom of the middle tag shown above (302-MVZPLY).

The American National Standards Institute (ANSI) has approved a new edition of the ANSI/ISEA 107-2015 standard. This standard consolidates the ANSI/ISEA 107-2010 standard for High-Visibility Safety Apparel (HVSA) and the ANSI/ISEA 207-2011 American National Standard for High-Visibility Public Safety Vests into a single comprehensive standard going forward.

BREAKAWAYNON-ANSI

The smallest size allowable under the ANSI/ISEA 107 – 2010 standard was generally considered too big for workers requesting a size smaller than medium. This requirement changed significantly, and the new ANSI/a 107-2015 standard now allows for a truer size small to be achieved.

Smaller Sizing Will Be Available

MEDIUM

SMALL

120cm

114cm

29cm30cm

69cm

71cm

MEDIUM

SMALL

120cm

114cm

29cm30cm

69cm

71cm

26cm

27cm

Class 3 Smallest size offered decreases from 1240 sq. in. to 1000 sq. in.

Class 2 Smallest size offered decreases from 775 sq. in. to 540 sq. in.

Old (ANSI 107-2010) New (ANSI 107-2015)

Page 2: consolidates ANSI/ISEA 107-2010 ANSI/ISEA 207-2011 ... · ANSI/ISEA 107-2015 standard, ... The American National Standards Institute (ANSI) ... COLOR Hi-Vis Lime Yellow or Hi-Vis

The products themselves and the protection they provide will not be changing under the new standard. Only the tags, descriptions, and spec sheets will be changing to reflect the new categorizations.

In order to reflect these changes appropriately, PIP will be updating all of our spec sheets and webpages for our entire Hi-Vis product offering to reflect the new categorization. This includes vests, shirts, sweatshirts, jackets, coats, and rainwear. To help with the transition, we will also be displaying the old ANSI classification on both our website and the spec sheets simultaneously.

As it pertains to updating our product tags, we will be executing a rolling change with new production orders. Depending on the products, this process could take several months before these changes are seen in the field. For that reason, it’s important to refer to the manufacturer spec sheet in order to obtain this information.

What Changes Can We Expect?

PROTECTIVE INDUSTRIAL PRODUCTS, INC. | BRINGING THE BEST OF THE WORLD TO YOU®

968 Albany Shaker Road | Latham, NY 12110 | 800-262-5755 | sa les@pipusa .com | www.p ipusa .com

All infographics and icons © 2016 Protective Industrial Products, Inc. All rights reserved.

This document and the information contained herein is the property of Protective Industrial Products, Inc. (PIP) and may not be used or reproduced without permission. Product users should conduct all appropriate testing or other evaluations to determine the suitability of PIP products for a particular purpose or use within a particular environment. PIP DISCLAIMS ALL WARRANTIES OTHER THAN AS EXPRESSLY PROVIDED.

SPECIFICATION SHEET

PROTECTIVE INDUSTRIAL PRODUCTS, INC. | BRINGING THE BEST OF THE WORLD TO YOU®

AMERICAS: (800) 262-5755 • (518) 861-0133 | EUROPE: +34-96182-41-48 | AMEA: (ASIA, MIDDLE EAST, AFRICA) 852-2475-9228 | www.pipglobal.com

302-0500

ANSI TYPE R CLASS 2 TWO-TONE SAFETY SURVEYORS VEST• Solid front and mesh back for breathability• 2” two tone tape for optimum visibility• 2 mic tabs with reinfored stitching• Zipper closure• 2 external lower flap pockets, 2 internal lower pockets• 1 chest radio pocket, 1 internal pen pocket • 1 chest pocket with 4 pen pockets in front

APPLICATIONS• Construction • Municipalities • Shipyards • Anywhere hi-visibility apparel is necessary

CARE INSTRUCTIONSRecommend washing in tempered water not exceeding 104O F or 40O C. Wash in a 5-10 minute cycle time or hand wash. Rinse in cold water. Tumble dry at temperature not exceeding 104O F or 40O C, do not wring. Do not wash in biological powder, wash as synthetics. Maximum of 30 wash cycles.

TECHNICAL DATAMATERIAL 100% Polyester Mesh & Solid Tricot

CONSTRUCTION Main: 120g/m2 tricot polyester knit Acc: 2-inch Level 2 silver two tone reflective tape

COLOR Hi-Vis Lime Yellow or Hi-Vis Orange

SIZES M - 7X

PACKAGING 1/Polybag, 50/Case

CASE 19” x 18” x 10” / 48.3cm x 45.7cm x 25.4cm

CASE WEIGHT 29.0 lbs / 13.2 kg

COO China

BARCODESITEM BAG DOZEN CASE

302-0500-YEL/M 01616314079237 --- 02616314079236

302-0500-YEL/L 01616314079244 --- 02616314079243

302-0500-YEL/XL 01616314079251 --- 02616314079250

302-0500-YEL/2X 01616314079268 --- 02616314079267

302-0500-YEL/3X 01616314079275 --- 02616314079274

302-0500-YEL/4X 01616314079282 --- 02616314079281

302-0500-YEL/5X 01616314079299 --- 02616314079298

302-0500-YEL/6X 01616314109156 --- 02616314109155

302-0500-YEL/7X 01616314109163 --- 02616314109162

302-0500-ORG/M 01616314079305 --- 02616314123977

302-0500-ORG/L 01616314079312 --- 02616314123984

302-0500-ORG/XL 01616314079329 --- 02616314123991

302-0500-ORG/2X 01616314079336 --- 02616314123004

302-0500-ORG/3X 01616314079343 --- 02616314123011

302-0500-ORG/4X 01616314079350 --- 02616314123028

302-0500-ORG/5X 01616314079367 --- 02616314123035

302-0500-ORG/6X 01616314109132 --- 02616314109131

302-0500-ORG/7X 01616314109149 --- 02616314109148

DIMENSIONS (in/cm)

M L XL 2X 3X 4X 5X 6X 7X

A 47/120 49.5/126 52/132 54.5/138 56.5/144 59/150 61.5/156 63.8/162 65.3/166

B 28/71 28/71 28/71 29/73.5 29/73.5 30/76 30/76 31.1/79 31.1/79

C 11.8/30 12/30.5 12.2/31 12.4/31.5 12.6/32 12.8/32.5 13/33 14.2/36 14.2/36

BREAKAWAYNON-ANSI

C

A B

BREAKAWAYNON-ANSI

BREAKAWAYNON-ANSI

BREAKAWAYNON-ANSI

BREAKAWAYNON-ANSI

BREAKAWAYNON-ANSI

BREAKAWAYNON-ANSI

BREAKAWAYNON-ANSI

BREAKAWAYNON-ANSI

How does the new standard affect the performance of the garments? The performance of the garments does not change under the new standard. Only the tags, descriptions, and spec sheets will be changing to reflect the new categorizations.

Can garments with labeling from with the old ANSI/ISEA 107 tags continue to be sold? Yes, garments that comply with the old standard can continue to be sold. Historically, there has been a time period of at least two years for manufacturers to make the necessary changes to comply to the new standard. Due to lead times and current inventory in the pipeline, it will take several months before all products are in compliance to the new standard. It’s also likely that, for a short while, there will be a mix of inventory that complies to either standard during this transitional period. For that reason, it’s important to refer to the manufacturer spec sheet for this information.

What is ANSI Supplemental Class E and how does it apply to the new standard? ANSI Supplemental Class E applies to Hi-Vis pants, bib overalls, shorts, and gaiters. Alone, these garments are not ANSI compliant. When combined with a Class 2 or Class 3 garment, the combination satisfies Class 3 requirements. This classification remains the same under the ANSI/ISEA 107-2015 standard.

More questions? Please contact your PIP representative, or call (800)262-5755.