console hepa air purifierproblem solution air purifier will not turn on or respond to button...

16
Console HEPA Air Purifier Questions or Concerns? Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at [email protected] or (888) 726-8520. Model No.: LV-H135

Upload: others

Post on 22-Aug-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

Console HEPA Air Purifier

Questions or Concerns?Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDTat [email protected] or (888) 726-8520.

Model No.: LV-H135

Page 2: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

T H A N K YO U F O R P U R C H A S I N G T H E LV- H 1 3 5 C O N S O L E H E PA A I R P U R I F I E R BY L E V O I T !

If you have any questions or concerns, please reach out to us at [email protected] hope you enjoy your new air purifier!

S H A R E T H E L E V O I T LO V E

Find @LevoitLifestyle on social media for wellness + style inspiration. We make every space mindful and chic.

@LevoitLifestyle#LevoitLove • #LevoitLifestyle

Page 3: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

3

Package ContentsSpecificationsSafety InformationGetting to Know Your Air PurifierLED DisplayGetting StartedUsing Your Purifier

• General Operation• Automatic Shutoff• Auto Mode• Sleep Mode• Timer• Memory Function

Keeping Things Clean• Cleaning the Air Purifier• Air Filter Indicator• When Should I Replace the Air Filter?• Resetting the Air Filter Indicator• Cleaning the Dust Sensor Cover• Replacing the Air Filter

TroubleshootingWarranty InformationCustomer Support

3345689999999

10101010101011121313

TABLE OF CONTENTS

SPECIFICATIONS

1 x Air Purifier1 x True HEPA Filter (Pre-Installed)1 x User Manual 1 x Filter Reminder Card

PACKAGE CONTENTS

Power Supply AC 120V, 60Hz

Rated Power 40W

Applicable Area ≤ 463 ft² (43 m²)

Operating ConditionsTemperature: 14°F–104°F (-10°C–40°C)Humidity: ≤ 95% RH

Noise Level ≤ 54dB

CADR (Clean Air Delivery Rate)

212 CFM (360 m³/h)

Standby Power < 0.8W

Page 4: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

4

S A F E T Y I N F O R M AT I O N

To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines.

General Safety Plug and Cord

• Only use your air purifier as described in this manual.

• Do not use your air purifier outdoors.

• Keep your air purifier away from water, and wet or damp areas. Never place in water or other liquids.

• Keep your air purifier away from heat sources.

• Do not use where combustible gases or vapors are present.

• Supervise children when they are near the air purifier.

• Do not place anything into any opening on the air purifier, unless directed by the manual.

• Do not sit or place heavy objects on the air purifier.

• Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners.

• Always unplug your air purifier before servicing (for example, changing the air filter).

• Do not use your air purifier if it is damaged or not working correctly, or if the cord or plug is damaged. Do not try to repair it yourself. Contact Customer Support (see page 13).

• Not for commercial use. Household use only.

• Keep the air purifier near the outlet it is plugged into.

• Never place the cord near any heat source.

• Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.

• Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over.

• Your air purifier has a polarized plug (one prong is wider than the other), which fits into a polarized outlet only one way. This is a safety feature to reduce the risk of electric shock. If the plug does not fit, reverse the plug. If it still does not fit, do not use the plug in that outlet. Do not bypass this safety feature.

R E A D A N D S AV E T H E S E I N S T R U C T I O N S

Do not use this air purifier with solid-state speed controls (such as a dimmer switch).WARNING

Page 5: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

5

12

36

7

5

9

8

Front Back

G E T T I N G TO K N O W YO U R A I R P U R I F I E R

1. LED Display2. Air Outlet3. Housing4. Air Intake5. Air Quality Sensor6. Sensor Cover Sponge

4 4 10

11

7. Sensor Cover8. Safety Trigger9. Filter Cover10. True HEPA Filter11. Power Cord

Page 6: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

6

Display Button• Turns the display off.

• Press any button (except ) to turn the display back on.

L E D C O N T R O L PA N E L

On/Off Button• Press to turn the air purifier on or off.

Timer Button• Sets the timer and cycles through timer lengths

(see page 9).

Auto Mode Button• Turns Auto Mode on (see page 9).

Check Filter Button/Indicator• Lights up red to remind you to check the air filter

(see page 10).

Sleep Mode Button• Turns Sleep Mode on (see page 9).

Fan Speed Button• Cycles through fan speeds: low, medium, and

high.

Fan Speed Indicator Fan Speed

Low

Medium

High

Fan Speed Chart

Page 7: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

7

Changing Brightness

Use the palm of your hand to press the air quality indicator to change the brightness.

Air Quality Indicator

Color Air Quality

Red Bad

Yellow Moderate

Green Good

Blue Very Good

NOTE: Touching with just a fingertip will not change the brightness.

• Displays air quality using the air quality sensor inside the air purifier.

Air Quality Indicator Chart

Page 8: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

pull tabs facing out

Figure 1.1

8

G E T T I N G S TA R T E D

Figure 1.2

1. Pull the handle of the filter cover to open the housing. Remove the air filter from the housing. [Figure 1.1]

2. Take the filter out of its plastic packaging, then reinstall it into the housing. Make sure the pull tabs on the filter are facing out. [Figure 1.2]

NOTE: If you are not planning to use the air purifier for a long period of time, we recommend leaving the filter inside its plastic packaging until it is ready to be used, to keep it clean.

Figure 1.3

Figure 1.4

3. Replace the filter cover by lining up the cover’s feet with the matching slots on the bottom of the housing. [Figure 1.3]

4. Push the cover securely closed. [Figure 1.4] The air purifier uses a magnetic safety trigger to make sure that the filter cover is closed. If not properly closed, the air purifier will not turn on.

Page 9: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

9

U S I N G YO U R P U R I F I E R

General Operation

Auto Mode

1. Place the air purifier on a hard, flat surface. Leave 15 inches (38 cm) of clearance on all sides of the purifier. [Figure 2.1]

2. Press to turn on the air purifier. The air purifier fan will start automatically.

3. Optionally, press to change fan speed. You can also select Auto Mode or Sleep Mode, or select a timer.

• For best results, run the air purifier at maximum speed for 15–20 minutes before using a lower speed or Auto Mode.

• To effectively clean air, keep windows closed while the air purifier is operating.

4. Press to turn off the air purifer.

Auto Mode uses the air quality sensor inside the air purifier to adjust the fan speed automatically based on air quality. For example, if the air quality is bad, the fan will automatically be set to high speed. See Auto Mode Chart.

Press to turn Auto Mode on.

NOTE: Pressing or will exit Auto Mode.

Figure 2.1

38 cm

Color Air Quality Fan Speed

Red Bad High

Yellow Moderate Medium

Green Good Low

Blue Very Good Sleep Mode

Auto Mode Chart

Timer

Memory Function

Automatic Shutoff

1. Press to turn on or off the timer, and to cycle through timer options (2, 4, or 8 hours).

2. The air purifier will automatically power off once the timer is finished.

NOTE: Pressing or unplugging the air purifier will cancel the timer.

The air purifier will remember its programmed settings when turned off, and will resume these settings when turned back on.

NOTE: The air purifier will not remember timers.

As a safety feature, the air purifier will automatically turn off if the filter cover is removed.

Sleep Mode

Sleep Mode uses the lowest possible fan speed to operate quietly.

Press to turn Sleep Mode on.

NOTE: Pressing or will exit Sleep Mode.

Page 10: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

Figure 3.1

10

K E E P I N G T H I N G S C L E A N

1. Wipe the outside of the air purifier with a dry cloth. Do not clean with water or any other liquid, to avoid risk of electric shock.

2. Clean the outside of the filter with a brush or vacuum each month to prevent buildup of hair or dust. Do not clean the filter with water or other liquid.

will light up as a reminder to check the air filter. The indicator is automatic. You may not need to change your filter yet, but you need to check it when lights up.

Reset the air filter indicator when:

• lights up.

1. Replace the air filter (see page 11).

2. Press and hold for 3 seconds.

3. The light will turn off after the filter indicator is successfully reset.

• The air filter was changed before lit up.

1. Press and hold for 3 seconds.

2. The air purifier will chime after the filter indicator is successfully reset.

The air filter should be replaced every 6–8 months. You may need to replace your filter sooner or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to change the filter more often (even if is off).

Watch out for the signs of an expired filter:

• Increased noise when the air purifier is on• Decreased airflow• Unusual odors• Visibly clogged filter

NOTE:• Only use official Levoit LV-H135-RF replacement filters

for this air purifier.

• Scan the QR code to purchase new air filters.

Cleaning the Air Purifier

Air Filter Indicator

Resetting the Air Filter Indicator

Cleaning the Sensor CoverWhen Should I Replace the Air Filter?

If the air quality indicator does not seem to be accurate, clean the sensor cover.1. Remove the sensor cover. [Figure 3.1]

NOTE: The sensor cover has a sponge inside to protect the air quality sensor from large particles.2. Wipe the cover with a dry cloth. Wipe the cover with a dry

cloth. Wash the sponge with clean water, then dry.

3. Replace the sensor cover.

NOTE: Do not throw away the sponge. If the sponge is not in the sensor cover, the air quality sensor may not work correctly.

Page 11: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

unplugair purifier

pull tabsfacing out

11

1. Unplug the air purifier and remove the filter cover. [Figure 4.1]

Replacing the Air Filter

2. Remove the old air filter and properly dispose of it. [Figure 4.2]

3. Clean any remaining dust and dirt from inside of the housing using a vacuum hose. [Figure 4.3]

4. Unwrap the new air filter and place it into the housing. Make sure the pull tabs are facing out. [Figure 4.4]

Figure 4.1

Figure 4.2

Figure 4.4

Figure 4.3

5. Replace the filter cover. The air purifier will not power on unless the cover is replaced correctly. [Figure 4.5]

6. Plug in the air purifier and turn it on.

7. Press and hold for 3 seconds to reset it. (see Resetting the Air Filter Indicator, page 10).

Figure 4.5

Page 12: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

12

T R O U B L E S H O OT I N G

Problem Solution

Air purifier will not turn on or respond to button controls.

Plug in the air purifier.

Check to see if the power cord is damaged. If so, stop using the air purifier, and contact Customer Support (see page 13).

Properly place the filter cover on the air purifier, so that the safety switch is activated (see Getting Started, page 8).

Plug the air purifier into a different outlet.

Air purifier may be malfunctioning. Contact Customer Support (see page 13).

Air purifier makes an unusual noise while the fan is on.

Make sure the air filter is properly in place and removed from its plastic packaging (see Getting Started, page 8).

Replace the air filter (see Replacing the Air Filter, page 11).

The air purifier may be damaged, or a foreign object may be inside. Stop using the air purifier and contact Customer Support (see page 13). Do not open the air purifier.

Poor air purification quality.

Make sure no objects are blocking the top or sides of the air purifier (the inlet or outlet).

Close doors and windows while running the air purifier.

Make sure the air filter is properly in place (see Getting Started, page 8).

Make sure the room is smaller than 463 ft² (43 m²). The air purifier may not be effective in larger rooms.

Replace the air filter (see Replacing the Air Filter, page 11).

The air purifier is producing an unpleasant odor.

Replace the air filter (see Replacing the Air Filter, page 11).

Make sure that the air purifier is in a room where the relative humidity is less than 85% RH. Higher humidity levels may cause mildew to grow on the air filter.

is still illuminated after replacing the air filter.

Reset (see Resetting the Air Filter Indicator, page 10).

If your problem is not listed, please contact Customer Support (see page 13).

Page 13: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

13

WA R R A N T Y I N F O R M AT I O N

TERMS & POLICY

Levoit warrants all products to be of the highest quality in material, craftsmanship, and service, effective from the date of purchase to the end of the warranty period.

Levoit will replace any product found to be defective due to manufacturer flaws based on eligibility. Refunds are available within the first 30 days of purchase. Refunds are only available to the original purchaser of the product. This warranty extends only to personal use and does not extend to any product that has been used for commercial, rental, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product.

This warranty is non-transferrable. Levoit is not responsible in any way for any damages, losses, or inconveniences caused by equipment failure by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual.

This warranty does not apply to the following:• Damage due to abuse, accident, alteration, misuse, tampering, or

vandalism.• Improper or inadequate maintenance. • Damage in return transit.• Unsupervised use by children under 18 years of age. Levoit and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Additional 1-Year WarrantyYou can extend your 1-year warranty by an additional year. Log onto www.levoit.com/warranty and enter your order number (e.g., from Amazon or Houzz) within the first 14 days of your purchase to register your new product for the extended warranty.

If you are unable to provide the order number for your product, please type a short note in the order number field along with the date you received your product.

Defective Products & ReturnsShould your product prove defective within the specified warranty period, please contact Customer Support via [email protected] with your order number. Once our Customer Support Team has approved your request, please return the unit with a copy of the invoice and your order number.

Product Name Console HEPA Air Purifier

Model Number LV-H135

Default Warranty Period 1 year

For your own reference, we strongly recommend that you record your order number and date of purchase.

Date of Purchase

Order Number

C U S TO M E R S U P P O R T

If you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is our goal!

Customer SupportArovast Corporation1202 N. Miller St., Suite AAnaheim, CA 92806

Contact InformationEmail: [email protected]: (888) 726-8520

Support HoursMon–Fri, 9:00 am–5:00 pm PST/PDT

*Please have your order invoice and order number ready before contacting Customer Support.

Page 14: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop
Page 15: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

Connect with us @LevoitLifestyle

Page 16: Console HEPA Air PurifierProblem Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If so, stop

Levoit.com

V1.3