configuring super aso with aliases
DESCRIPTION
Configuring Super ASO With Aliases. - Source system. Select Switch-Over >Source Options. Configuring Super ASO With Aliases. Click Add to add a new alias for the source system. Configuring Super ASO With Aliases. Click Add to add a new alias for the source system. - PowerPoint PPT PresentationTRANSCRIPT
1April 19, 2023
Configuring Super ASO With Aliases
Select Switch-Over
>Source Options.
- Source system
2April 19, 2023
Configuring Super ASO With Aliases
Click Add to add a new alias for the source system.
3April 19, 2023
Configuring Super ASO With Aliases
Click Add to add a new alias for the source system.
4April 19, 2023
Configuring Super ASO With Aliases
Click the IP Addresses tab to optionally specify:
– DNS – IP and subnet
information
Click OK.
5April 19, 2023
Configuring Super ASO With Aliases
Check box next to the alias,
Select Activate Alias,
Click OK.
6April 19, 2023
Configuring Super ASO With Aliases - Target
Click on the target system window
Select Switch-Over
>Target Options.
7April 19, 2023
Configuring Super ASO With Aliases - Target
Select Add Site (Super ASO) and the Accept Aliases check box.
Configure additional target options as needed
Click OK.
8April 19, 2023
Super ASO Switch-over Configuration With Alias
Replication path #1
Replication path #2
A: SourceA: Source C: AliasC: Alias B: TargetB: Target
Dedicated link
Basic MaxAttach MSS configuration
9April 19, 2023
Successful Fail-over with alias
BB:: TTaarrggeett
B: TargetB: TargetC: AliasC: Alias
Dedicated link
In the case the target detects failure of the source, it will attempt to ping ALL possible paths to the source to be sure the source has actually failed
10April 19, 2023
Successful Fail-over with alias
BB:: TTaarrggeett
The target takes over the alias from the original source and becomes the source. The original source is now the target.
11April 19, 2023
Configuring Super ASO without Aliases (Source Options)
Select Switch-Over>Source Options.
Select the Timeouts tab and make the appropriate entries.
Click IP Addresses. Click the Services tab.
Click OK. To configure the target switch-over options as follows
12April 19, 2023
Configuring Super ASO without Aliases (Target Options)
From the target system, select Switch-Over>Target Options.
Select Add Site (Super ASO) and the Accept Aliases check box.
Configure additional target options as needed
Click OK.
13April 19, 2023
Successful Fail-over without alias
BB:: TTaarrggeett
B: TargetB: Target
Dedicated link
In the case the target detects failure of the source, it will attempt to ping ALL possible paths to the source to be sure the source has actually failed