conditionning cosumaes ii€¦ · conditioning, oil change... the clas team. 2 recoene user prices,...
TRANSCRIPT
BRAKING
CONSUMABLESDRAINING
AIRCONDITIONNING
FROM 01/05/2020 TO 31/08/2020
Summer
It's time for check-up!
Why don't we take the time to check our classics? To ensure that we can move around safely and in optimal comfort, here is a selection of products.
To accompany you through this particular period, discover our special offers dedicated to each universe: braking, air conditioning, oil change...
The Clas Team
2 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
Air conditioningCompatible with R134
and 1234YF gas
The tooling contained in the case is used to "pressurize" the refrigeration and air conditioning systems in order to "simulate", inside the systems, at which pressure it will have to operate.
NITROGEN/HYDROGEN LEAK KIT (N2-H2) 50bars
AC 1017
Compatible with small and large bottles
Contents: • carrying case • SA4062: pressure relief valve block with safety valve up to 50bar • SA4060: insulation pressure gauge + flexible 100cm• SA4063: reducer for 1kg bottle • SA1090: hydrogenated nitrogen bottle (N2-H2)1kg• SA4061: 160cm piping system • SA4029: high pressure connection• SA4052: gas-specific high pressure fitting R1234YF
Users price 480 €VAT Excl.*
399€VAT Excl.
Multi-gas
This leak detector with a sensor designed to detect the smallest concentrations of hydrogen nitrogen and other gases.Compatible with Hydrogen Nitrogen (N2-H2), R134-a, R1234YF, R404-A, R410-A, R407-C, R22, Freon...When a concentration is detected, an audible alarm is emitted and the display indicates the size of the leak (from 1 to 7).
UNIVERSAL ELECTRONIC LEAK DETECTOR R134/1234YF/HYDROGEN
AC 7495
Specifications:• sensitivity adjustable on 3 levels• automatic calibration• sensor type: Semiconductor• integrated fan• power supply: 4 x AA alkaline batteries• battery life: 4-6h continuously• low battery indicator• preheating time 45 s• probe length: 40cm• delivered in a suitcase with batteries
Users price 549 €VAT Excl.*
459€VAT Excl.
FROM 01/05/2020 TO 31/08/2020
3
Expert advice!Before going on holiday this summer, most people will get their air conditioning checked! However, don't wait until the air conditioning is no longer cold!
It is important to have your air conditioning checked and serviced every 2 years. When the air conditioning is no longer cold, this can mean 2 things:
• The issue is related to the mechanics of the circuit • The issue is a leak in the circuit and these cause the release of greenhouse gases.
Nitrogen 95% and hydrogen 5%
Users price 152 €VAT Excl.*
110€VAT Excl.
Users price 79 €VAT Excl.*
69€VAT Excl.
PACK OF 3 NITRO-TRACE CYLINDER 1kg
SA 1090X3
Spare part of AC 1014/AC 1015/AC 1016
2.2kg NITRO-TRACE CYLINDER (N2-H2)
SA 1092
Accessory of AC 1014/AC 1015/AC 1016/AC 1017
2.2
250
Universal
Compatible with all gases: R12, R134, R1234YF
Specially developed for air conditioning systems with electric compressors (hybrid vehicles...)
UNIVERSAL AIR CONDITION TRACER BOTTLE 250ml
CO 4068
HYBRID VEHICULES AIR CONDITION TRACER BOTTLE 250ml
CO 4069 • integrated measuring scale • graduation dosing unit: 5ml• graduation bottle: 25ml
Users price 32 €VAT Excl.*
27€VAT Excl.
Users price 32 €VAT Excl.*
27€VAT Excl.
-28%
4 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
1 syringe = 1 test
1 syringe tracks up to 1.4kg of gasSupplied with adapter + hose with non-return valve (CO4075)
12 SYRINGE TRACER PACK 7,5ml FOR R134 GAS
CO 4077
For an optimal and quality diagnosis, CLAS recommends replacing the adapter + hose every 12 times.
Users price 29 €VAT Excl.*
21€VAT Excl.
1 syringe tracks up to 1.4kg of gasSupplied with adapter + hose with non-return valve (CO4075)
12 SYRINGE TRACER PACK 7,5ml FOR R1234 GAS
CO 4078
Users price 32 €VAT Excl.*
25€VAT Excl.
Specially developed for air conditioning systems with electric compressors (hybrid vehicles...).
12 SYRINGE TRACER PACK 7,5ml FOR HYBRID VEHICLE
CO 4079
1 syringe tracks up to 1.4kg of gas Delivered without adapter + hose with non-return valve (choose according to the gas content of the vehicle to be diagnosed) Adapters: • CO4075: tracer syringe adapter for gas R134• CO4076: tracer syringe adapter for gas R1234YF
Users price 18 €VAT Excl.*
15€VAT Excl.
Not suitable for hybrid vehicles (see CO4079)
Not suitable for hybrid vehicles (see CO4079)
1
UNIVERSAL AIR CONDITIONING LUBRICANT BOTTLE 1L PAG
CO 4081
PAG lubricant. All gas compatible.
For mechanical and electric Sanden compressors (hybrid vehicles).
Users price 29 €VAT Excl.*
24€VAT Excl.
-22%
-28%Air conditioning
FROM 01/05/2020 TO 31/08/2020
5
2 COUPLING 1/4" HIGH & LOW PRESSURE SET
AC 4029
HIGH PRESSURE COUPLER FOR GAS R1234YF
SA 4052
R12/R134 VALVE CORE REMOVER
AC 4048 UV GLASSES
SA 1002
LOW PRESSURE COUPLER FOR GAS R1234YF
SA 4054
AIRCON ADAPTER RENAULT
AC 4027
Contents:• SA4028 : low pressure coupler for aircon facility• SA4029 : high pressure coupler for aircon facility
Allows you to switch from the high pressure connector to the low pressure connector for any job requiring a low pressure connector
This specific 3/8"coupler 3/8", according to the standard SAE J639, allows to refill or to detect an aircon gas leak R1234YF.It can be connected to the vehicle for maintenance purposes with great simplicity thanks to the quick-locking function.
This specific 3/8"coupler 3/8", according to the standard SAE J639, allows to refill or to detect an aircon gas leak R1234YF.It can be connected to the vehicle for maintenance purposes with great simplicity thanks to the quick-locking function.
EN 166 : 2001 EN 170 : 2003
Users price 95 €VAT Excl.*
65€VAT Excl.
Users price 75 €VAT Excl.*
50€VAT Excl.
Users price 13 €VAT Excl.*
9€VAT Excl.
Users price 17 €VAT Excl.*
9€VAT Excl.
Users price 75 €VAT Excl.*
50€VAT Excl.
Users price 29 €VAT Excl.*
25€VAT Excl.
-31%
-33%
-30%
-47%
-33%
6 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
Set of connectors, plugs and valves for all basic maintenance of R134 air conditioning systems.
Contents: CO 4082x4: 20 valve core 19.0X5.12mm R1234YF CO 4083: 5 valve core 21,8X7,8mm R1234YF CO 4084: 5 valve core 22,1X9,8mm R1234YF CO 4085: 5 valve core 21,5,0X7,8mm R1234YF CO 4086: 5 valve core 20.0X7mm R1234YF CO 4092 : 5 valve core 27,5x7,5mm CO 4087: 5 plugs M8X1,0 short R1234YF CO 4088: 5 plugs M8X1,0 long R1234YF CO 4089: 5 plugs M9X1,0 long R1234YF CO 4090 : 5 plugs M10X0,75 R1234YF CO 4091 : 5 plugs M10X1,25 R1234YF AC 4048 : R12/R134 valve core remover
VALVE/CONNECTOR/PLUG AIRCON MAINTENANCE SET
AC 4034
AIR CONDITIONING MAINTENANCE KIT R1234YF
AC 4054
Components available at retail.
Users price 106 €VAT Excl.*
89€VAT Excl.
Users price 109 €VAT Excl.*
95€VAT Excl.
Air conditioning
FROM 01/05/2020 TO 31/08/2020
7
AIRCON MAINTENANCE TOOL SET FOR FRENCH VEHICLES (214 PCS)
AC 4024
AIRCON MAINTENANCE SET FOR GERMAN VEHICLES (171 PCS)
AC 4025
AIRCON MAINTENANCE SET FOR ITALIAN VEHICLES (178 PCS)
AC 4026
Users price 139 €VAT Excl.*
119€VAT Excl.
Users price 106 €VAT Excl.*
89€VAT Excl.
Users price 119 €VAT Excl.*
95€VAT Excl.
-20%
8 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
AIRCON MAINTENANCE SET FOR ASIAN VEHICLES (241 PCS)
AC 4032
AIRCON MAINTENANCE KIT FOR US VEHICLES (164 PCS)
AC 4033
4 COMPARTMENTS ORGANIZER FOR AIR CONDITIONING MAINTENANCE BOX
AC 4021
Users price 119 €VAT Excl.*
99€VAT Excl.
Users price 139 €VAT Excl.*
109€VAT Excl.
Users price 37 €VAT Excl.*
25€VAT Excl.
Ideal for grouping aircon maintenance sets.Can accommodate up to 4 sets.
-21%
-32%
Air conditioning
FROM 01/05/2020 TO 31/08/2020
9
Economical solution
AIR CONDITIONING LEAK STOP 30g FOR R134a
CO 4065
Allows plugging micro-leaks in metal parts, hoses and joints.Saves time on hard-to-access leaks.
Usable R12, R134. Recommended for vehicles containing up to 350ml of lubricant.
Users price 31 €VAT Excl.*
22€VAT Excl.
30
Economical solution
AIR CONDITIONING LEAK STOP FOR R1234yF
CO 4070
Allows plugging micro-leaks in metal parts, hoses and joints.Saves time on hard-to-access leaks.
Usable 1234YF Recommended for vehicles containing up to 350ml of lubricant.
Users price 32 €VAT Excl.*
25€VAT Excl.
400
Antibacterial/deodorizing
Cleans air-conditioning circuits and eliminates bacteria/germs. Enough to clean the system approx. 3 times.
AIR-CONDITIONING CIRCUIT CLEANER 400ml
CO 1019
Users price 32 €VAT Excl.*
84€VAT Excl.
The product is suitable for treating the air conditioning ducts by removing the bacteria, mould and impurities which are found there. It is easy to use and is sprayed out using the air vents. You will once again be able to operate your air conditioning system after 15 minutes.
6 for free!
-29% -22%
-50%
10 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
150
Neutralizes odours, antibacterial
Specially designed to sanitize the cabin by disinfecting and deodorizing aircon systems.Easy to use thanks to the diffuser.
AIRCON PERCEPTIBLE CLEANER 150ml
CO 1053
Users price 8 €VAT Excl.*
6,50€VAT Excl.
This kit allows you to visually check the condition of the air conditioning circuit.
DETECTION KIT / AIR CONDITIONING IMPURITIES FILTRATION SYSTEM R134
AC 1018
DETECTION KIT / AIR CONDITIONING IMPURITIES FILTRATION SYSTEM R1234YF
AC 1019
Users price 339 €VAT Excl.*
289€VAT Excl.
Users price 379 €VAT Excl.*
299€VAT Excl.
Controls the quality of the gas according to its clarity, allows to detect the presence of tracer, stop leak, impurities related to the failure of the circuit, or even the compressor. Our kit is also equipped with a moisture analyzer by changing the color as the gas passes through.
-21%
Air conditioning
FROM 01/05/2020 TO 31/08/2020
11
An economical way to remove contaminants and scale from air conditioning system components.
AIR CONDITIONING WASHING KIT
AC 1023
Specifications:• the process thoroughly cleans the circuit by removing oil,
contaminants, refrigerant residues and moisture from the circuit.
• essential intervention, when replacing a component of the circuit or simply opening the circuit, to quickly and efficiently remove refrigerant oil and debris when replacing a component (e.g. compressor).
• easy to use: simply fill the decontamination solution cartridge, pressurize with the nitrogen cartridge and purge each component. The cleaning solution is a highly evaporating product, so there is no risk of leaving moisture in the circuit.
• the drying of the circuit is done naturally with the hydrogenated nitrogen gas used.
• 2 washes with 500ml will be possible.
Users price 319 €VAT Excl.*
269€VAT Excl.
5
LIQUID CANISTER WASHING AIR CONDITIONING 5L
CO 1070
Users price 57 €VAT Excl.*
49€VAT Excl.
Good to know: It is strongly recommended to carry out maintenance of the brake system every 2 years, and to completely replace the brake fluid.
In fact, it is exposed to very high temperature rises. Over time, the liquid loses its efficiency and allows it to boil.
However, boiling of the liquid also creates air bubbles. If there is too much air in the system, the brakes will simply stop working.
55
Maintaining liquid thrust in pulsating flow
Compact and lightweight.Automatic stop when the level in the can is too low.Automatic bleeding after canister change.Checks the low pressure brake system for leaks.
ELECTRIC BRAKE BLEEDER 5L 2.5bar
HU 1101
Specifications:• 230V power supply (5m cord)• equipped with an on/off switch• equipped with a pressure regulator 0-2.5bar with maintenance of the thrust of the
liquid in pulsating flow• pressure gauge for pressure control • suitable for clutches and brakes (compatible with ABS, EDS, ESP, SBC systems)• 5 litre capacity allowing several operations• interchangeable canister: ensures compatibility of the DOT3/DOT4/DOT5/DOT6
liquid• flexible L.3.5m• dimensions: 460x300x320mm• weight : 10kg
Supplied with metal plug Ø43mm
Braking
Users price 925 €VAT Excl.*
859€VAT Excl.
Users price 29 €VAT Excl.*
14,50€VAT Excl.
Allows to control the quality of the brake fluid by checking the quantity of water in the fluid. Clear, simple and quick reading of the test result (green/orange/red LED system).
Dot 3-4-5
BRAKE FLUID TESTER PROBE
AC 5004
Think about it! -50%
12 *Users price conseillé, applicable du 01/09/2019 au 31/08/2020. Illustrations non contractuelles.
Expert advice!
DU 01/05/2020 AU 31/08/2020
This tool lets you reshape brake line collars. It produces single or double SAE or DIN shapes on 4.75mm, 5mm or 6mm lines
No need to remove the lineDIN/SAE BRAKE LINE REPAIR KIT
OM 8047
SAE : male cone DIN : female cone
Users price 299 €VAT Excl.*
239€VAT Excl.
ASSORTED POPULAR BRAKE LINE FITTINGS BOX 135 PCS
EG 0007
Contents:• SA0771: Brake lines connectors M10x1 Ø4.75mm stepped base L.16mm 50 pcs• SA0772: Brake line nuts M10x1 Ø4.75mm 15 pcs• SA0773: Brake line connectors M10x1 Ø4.75mm L.16mm 20 pcs• SA0774: Brake line connectors M10x1 Ø4.75mm stepped base L.22mm 20 pcs• SA0775: Brake line nuts UNF 3/8" Ø4.75mm 10 pcs• SA0776: brake line connector UNF 3/8"Ø4.75mm stepped base L.20mm 20 pcs
Think about it!
650 650
Eco-friendly
RECHARGEABLE SPRAY 650ml
EG 1530 5L CONTAINER OF BRAKES CLEANER
CO 1530
Ideal for lubricants, anti-seize, brake cleaners, air dust cleaning.Long nozzle for hard-to-reach places.
Specifications: • aluminium bottle• 2 in 1 nozzle (fog and jet)• schrader® pressure type valve• safety valve 6.3bar
Users price 61 €VAT Excl.*
49€VAT Excl.
Users price 61 €VAT Excl.*
80€VAT Excl.
-20%
-20%
-25%
-20%
Users price 79 €VAT Excl.*
59€VAT Excl.
13
80
80
80l WASTE OIL DRAINER
HU 0180N
80l MIXED WASTE OIL DRAINER
HU 0149N
FLEXIBLE SPOUT FUNNEL Ø145mm
HU 0513BL
FLEXIBLE SPOUT FUNNEL Ø145mm
HU 0513BL
Specifications:• capacity: 80l• drain pressure : 0.5bar• 4 wheels including 2
directional• h. min.: 1200mm• h. max.: 1795mm• oil level indicator• tray Ø: 520mm
Specifications:• gravity draining• vacuum draining• air inlet pressure: 6 to 8bar• Ø tray: 520mm• air pressure for oil discharge:
0.5bar• oil level indicator• h. min.: 1210mm• h. max.: 1795mmSupplied with flexible and rigid probes (shank Ø: 12.2mm)
Draining
Users price 389 €VAT Excl.*
299€VAT Excl.
Users price 429 €VAT Excl.*
369€VAT Excl.
Free
Free
+
+ High performance preventive and curative treatment for oil circuits.Cleans parts in contact with oil, improves combustion, reduces friction and deposits a wear-resistant coating on all petrol and diesel engines. Revives gaskets.
Specifications:• dissolves scale, filings and other dirt to facilitate their
evacuation during emptying• cleans pushers and pistons, reduces slamming• reduces polluting emissions• ensures turbo longevity• fluidifies oil for easy oil change while cleaning circuits
and eliminating deposits• dilution: 5% (one bottle for 6L of oil)
Use after draining and filling with new oil.
300ml ENGINE CLEANER BEFORE DRAINING
CO 1015
300 ml ENGINE OIL TREATMENT
CO 1009
300
300
-23%
Users price 12 €VAT Excl.*
10€VAT Excl.
Users price 15 €VAT Excl.*
13€VAT Excl.
14 *Users price conseillé, applicable du 01/09/2019 au 31/08/2020. Illustrations non contractuelles.
Think about it!
Think about it!
Oil is to the engine what blood is to our body: it lubricates it, cleans it, cools it and protects it.
Changing and renewing the oil is a crucial step that should not be neglected, otherwise the engine will wear out and may break down. Note: adhering to the oil change intervals ensures optimum engine maintenance.
This should be done every year, or when a certain mileage threshold is reached (e.g. every 15,000 km).
DU 01/05/2020 AU 31/08/2020
80
80l MIXED WASTE OIL DRAINER WITH BOWL
HU 0159N
FLEXIBLE SPOUT FUNNEL Ø145mm
HU 0513BL
Specifications:• transparent pre-chamber with level indicator• 1.5m suction hose with valve and quick connect for probes• gravity draining• vacuum draining• air inlet pressure: 6 to 8bar• Ø tray: 520mm• pre-chamber capacity: 9l• air pressure for oil discharge: 0.5bar• oil level indicator• h. min.: 1350mm• h. max.: 1795mm
Includes flexible and rigid probes
Users price 559 €VAT Excl.*
445€VAT Excl.
Free+
Preventive and curative anti-friction for engines and gearboxes. Reduces friction and provides a wear-resistant coating for long engine life.Revives gaskets.
This tool after vacuuming allows an autonomous emptying indoors as well as outdoors in the workshop.
In addition, the graduation of its used oil recovery bowl reassures you of the quantity of oil withdrawn. Ideal for vehicles that do not have a level control sensor.
Dilution: • engine: 6 to 7.5% (one
bottle for 4 to 5L of engine oil)
• gearbox: 10% of the oil volume
300 ml ANTI-FRICTION ENGINE/GEARBOX
CO 1017
300
-20%
Users price 19 €VAT Excl.*
17€VAT Excl.
15
Think about it!
Expert advice!
70
24L SUCTION DRAINER
HU 0139
FLEXIBLE SPOUT FUNNEL Ø145mm
HU 0513BL
Specifications:• venturi design• air inlet pressure: 6 to 8bar• air pressure for oil discharge: 0.5bar• oil level indicator
Users price 349 €VAT Excl.*
279€VAT Excl.
Free+
This tool after vacuuming allows an autonomous emptying indoors as well as outdoors in the workshop.
Supplied with flexible and rigid probes
24
PNEUMATIC OIL DISTRIBUTOR 24L
HU 0620 RECUPERATEUR HUILE 70l
HU 0079BL
Specifications:• supply for tank discharge: 0.5bar• level indicator• trigger with holding in discharge position• fixed filling funnel, with strainer
Users price 309 €VAT Excl.*
255€VAT Excl.
Users price 309 €VAT Excl.*
159€VAT Excl.
FLEXIBLE SPOUT FUNNEL Ø145mm
HU 0513BL
Free
+
-20%
-23%
Caractéristiques : - capacité : 70l - pression de vidange : 1 à 2bar - poignée et plateau de rangement - 4 roues dont 2 directionnelles - hauteur mini : 1005mm - hauteur maxi : 1610mm - rayon d'action total de la vasque : 620mm - Ø vasque : 420mm
70
16 *Users price conseillé, applicable du 01/09/2019 au 31/08/2020. Illustrations non contractuelles.
Draining
DU 01/05/2020 AU 31/08/2020
300
300
Plugs leaks in the coolant circuit, ensures the radiators and water pumps are leakproof and avoids overheating.
High performance curative cleaner for descaling and cleaning cooling circuits.
Removes deposits and limescale from pipes, hoses and radiators. Removes a protective layer against rust and corrosion. Renovates thermostat gaskets and relieves water pumps.
Allows almost the full circuit to be repaired. This product, which is composed of gel and aluminum flakes, permits you to carry out repairs by creating a patch on non-rigid parts (water container, hoses..) and the aluminum flakes repair the radiator by sealing the leak using the flakes.
Exclusive gel formula with
flakes of aluminum incorporated
RADIATOR LEAK SEALER 300ml
CO 1012
LOT DE 6 300 ml COOLING SYSTEM CLEANER
CO 1013
Treats 4 to 8L of liquid.
Dilution: 6 to 7.5% (one bottle for 4 to 5L of coolant)
Users price 349 €VAT Excl.*
55€VAT Excl.
Users price 349 €VAT Excl.*
55€VAT Excl.
Consumables
1 for Free!
1 for Free!
17
18 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
300 500
300ml ENGINE CLEANER BEFORE DRAINING
CO 1015
6 BODY REPAIR DEGREASING/CLEANING SPRAYS
CO 1029X6
High performance preventive and curative cleaner for oil circuits.
Allows you to degrease and clean bodywork parts before painting or adhesion.Eliminates residues of glue, grease, oil, silicone.
Specifications:• dissolves scale, filings and other dirt to facilitate
their evacuation during emptying• cleans pushers and pistons, reduces slamming• reduces polluting emissions• ensures turbo longevity• fluidifies oil for easy oil change while cleaning
circuits and eliminating deposits• dilution: 5% (one bottle for 6L of oil)
Engine cleaner after emptying: CO1009
Users price 349 €VAT Excl.*
60€VAT Excl.
Users price 349 €VAT Excl.*
48€VAT Excl.
Users price 349 €VAT Excl.*
48€VAT Excl.
2 for Free!
2 for Free!
Degreases and eliminates
siliconeanti-static
400
Long-term protection
6 SUPER RELEASING GRAPHITE SPRAYS
CO 1026X6
Thanks to its very low surface tension graphite formula, this super releasing spray penetrates deeply to erode rust, leaving a protective graphite film. Facilitates future removal.
Releases and protects, minimizes friction and stops rust.
Consumables
1 for Free!
FROM 01/05/2020 TO 31/08/2020
19
400 400
6 MULTI-FUNCTIONAL GLUE SPRAY SET 400ml
CO 1023X6 ANTI STONE-CHIP SPRAY 400ml
CO 1033
Allows headliners, trims, rods, engine foams, upholstery, vinyl, carpet to be glued...
Anti stone-chip spray which allows you to almost exactly reproduce fine and medium anti stone-chip effects. Its thick formula will offer real protection to the mount you wish to treat with quick and easy application.
Users price 349 €VAT Excl.*
60€VAT Excl.
Users price 349 €VAT Excl.*
60€VAT Excl.
Users price 349 €VAT Excl.*
60€VAT Excl.
Users price 349 €VAT Excl.*
44€VAT Excl.
Exclusive thick formula, remains supple after
drying
High-adhesion spray for a wide range of uses with high initial resistance. The glue’s adhesion properties develop quickly and it is extremely water resistant and long-lasting.
Forms an elastic, wear-resistant protective coating. Protects against stone chips and corrosion
400
PLASTIC PRIMARY SPRAY 400ml
CO 1002
Allows all plastic surfaces to be primed before painting or gluing.
Colour: transparent
400
Respect for colorimetry
6 ANTI STONE-CHIP SPRAYS
CO 1004X6
Enables varnishing and protection of finishing paints while providing a glossy finish. Ideal on body parts (hood, door, wing, underbody, rims...etc) Transparent, UV and scratch resistant
2 for Free!
2 for Free!
2 for Free!
2 for Free!
20 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
500
310
Fast drying time Quick sanding
6 LIGHT GREY FILLER PRIMER 500ml
CO 1042X6
6 WHITE FILLER PRIMER 500ml
CO 1043X6
6 BLACK FILLER PRIMER 500ml
CO 1044X6
DARK GREY GARNISHING PRIMER 500ml
CO 1001
Allows application without primer on any support (metal, plastic and aluminum). Removes unevenness, provides a homogeneous and uniform surface before sanding. Filling up to 120μ
Users price 72 €VAT Excl.*
48€VAT Excl.
Users price 96 €VAT Excl.*
64€VAT Excl.
Available in different colours
Available in different colours
SET OF 6 ANTI GRAVEL POLYMER CARTRIDGES 310ml
CO 1034X6
6 ANTI GRAVEL MS POLYMER BEIGE CARTRIDGES
CO 1057X6
6 ANTI GRAVEL MS POLYMER GREY CARTRIDGE SET 310ml
CO 1058X6
Adheres to all surfaces Anti-corrosive, may even be applied to bare metal High density: load up to 5mm in a single pass Also allows the reproduction of seals which were originally sprayed and crimped seals
Easy to install, giving an optimal result. Ideal for application on bare metal. This brand new cutting-edge product can be applied wet-on-wet to obtain an optimal anti stone-chip effect in record time.
Consumables
20
2 for Free!
2 for Free!
FROM 01/05/2020 TO 31/08/2020
21
The essentials
804
DRY AND WET VACUUM CLEANER 2x1000W
EG 0040
Specifications:• stainless steel tank mounted on a 4-wheel dolly• 2 motors of 1000W each• 80l tank Ø420mm• drain on 500mm tank• pressure: 21kPa• air flow: 108l/s• sound level: 73dB
Power supply- 220V 4m cable• power: 2000W• dimension (lengthxdepthxheight): 540x595x940mm
Included accessories:• SA0442: thin tip with connector Ø42mm• SA0443: Ø60mm brush with connector Ø42mm• Ø42mm handle with accessory connector Ø37mm• SA0440: 2200mm flexible hose Ø42mm• SA0444: Ø37mm scraper• SA0445: Ø37mm brush length 400mm• SA0441: cloth filter
Users price 365 €VAT Excl.*
289€VAT Excl.
Users price 109 €VAT Excl.*
69€VAT Excl.
SPIRAL 4000mm Ø42mm
SA 0446
Free+
Prevents wheel falls, prevents MSD
WHEEL MOUNTING GUIDE SET M12-M14
OM 9320
Insert without screwing Equipped with a plastic ring, they do not damage the threads in the hubs. For wheels with M12 and M14 bolts.
Contents: • magnetic carrier • M12 guide• guide M14• 2 spare M12 rings • 2 spare M14 rings
Insert without screwing
-21%
-36%
22 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
16 16
AIR REEL Ø8mm 16m
OP 1115
AIR REEL Ø10mm 16m
OP 1117
• automatic spacing/scanning cable guide• stop device every 50cm (can be deactivated)• dust-tight bearing• pipe: Øint. 8mm• connector: 1/4"• swiveling wall support 180°• operating pressure: 12bar• max. pressure: 30bar
• automatic spacing/scanning cable guide• stop device every 50cm (can be deactivated)• dust-tight bearing• pipe: Øint. 10mm• connector: 1/4"• swiveling wall support 180°• operating pressure: 12bar• max. pressure: 30bar
Users price 179 €VAT Excl.*
119€VAT Excl.
Users price 1599 €VAT Excl.*
1499€VAT Excl.
Users price 194 €VAT Excl.*
139€VAT Excl.
Automatic cable spacing when rolled up
1.2
Specially designed to adapt to widely spaced loop springs and securely hold them in place.Thanks to the innovative articulation system, automatic adjustment takes place when the spring is compressed.
PNEUMATIC SPRING COMPRESSOR CERTIFIED VERITAS WITH ARTICULATED JAWS
OP 2031
Specifications:• height: 1400mm• base:
Length: 650mm Width: 400mm
• working pressure: 6bar/max. 8bar• compression strength 1226kg• use and maintenance instruction book.• color: blue• allocation:
OP2003: articulated lateral jaw OP2009 : 1 cup Ø105 to Ø182mm (Mégane, C3, Stylo...) SA6916: 1 cup Ø78 to 130mm SA6906: fall protection support
• weight: 62kg• standards 2006/42CE
Equipped with an air supply contact breaker (SA2035) at the opening of the grid (OP2005).
-33%
-28% The essentials
FROM 01/05/2020 TO 31/08/2020
23
Users price 1340 €VAT Excl.*
1240€VAT Excl.
Users price 799 €VAT Excl.*
759€VAT Excl.
Users price 879 €VAT Excl.*
810€VAT Excl.
Compatible with all 12V vehiclesOversized and insulated copper/brass clampsAnti-shock ABS case
Lightweight, operates without battery
BOOSTER CONDENSER 12V 1200F
OE 5150
BOOSTER CONDENSER 12V 3000F
OE 5151
Specifications: • starting current: 1400A• peak current: 4500A• capacity: 6x1200F (Farads)• cables: 25mm², L.125cm• integrated cigar lighter socket• charging time: 30sec to 2min on started vehicle• battery: AGM• weight: 3.7kg• dimensions: 390x130x320mm
Specifications: • starting current: 1800A• peak current: 9000A• capacity: 6x3000F (Farads)• cables: 25mm², L.125cm• integrated cigar lighter socket• charging time: 30sec to 2min on started vehicle• battery: AGM• weight: 9.8kg• dimensions: 390x130x320mm
DUAL LASER HEADLIGHT ADJUSTMENT DEVICE
AC 2013
Specifications: • laser-type aligner (SA2037) compliant with standard EN 60825• digital luxmeter• alu column (collapsible) graduated from 20 to 150cm• sliding regulating mechanism• thermoplastic housing with tilt adjustment• laser aligner power supply: 3 1.5V batteries (supplied)• dimensions: L.712xW.580xH.1810mm• UTAC NFR 63801 standard
Functions: - control and measurement of the closing mechanism 0-4% - control of the lateral adjustment ±5cm/10m - measurement of the illumination intensity 0-150klux/1m, 0-240lux/25m - intervention on headlights (xenon, halogen, LED...), anti-fog
24 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
Made in France
METAL TOOLBOX 3 STOREY/6 COMPARTMENT
EG 0061
Specifications: 6 compartments: • 2 x L.210xW.97xH.97xH.44mm• 3 x L.425xW.97xH.44mm• 1 x L.425xW.198xH.104mm
Padlock locking device 2 handles Ø14mm Folding accordion type Anti-tipping device Dimensions: L.450xW 206xH 222mm
Users price 43 €VAT Excl.*
39€VAT Excl.
Users price 119 €VAT Excl.*
99€VAT Excl.
Users price 59 €VAT Excl.*
45€VAT Excl.
Users price 30 €VAT Excl.*
28€VAT Excl.
Forma : 1/3 drawer
12PCS ADJUSTABLE RATCHETING COMBINATION WRENCH INSERT 15° 8-19mm
OS 4020
Contents:• OS4021: adjustable ratcheting combination wrench 8mm• OS4022: adjustable ratcheting combination wrench 9mm• OS4023: adjustable ratcheting combination wrench 10mm• OS4024: adjustable ratcheting combination wrench 11mm• OS4025: adjustable ratcheting combination wrench 12mm• OS4026: adjustable ratcheting combination wrench 13mm• OS4027: adjustable ratcheting combination wrench 14mm• OS4028: adjustable ratcheting combination wrench 15mm• OS4029: adjustable ratcheting combination wrench 16mm• OS4030: adjustable ratcheting combination wrench 17mm• OS4031: adjustable ratcheting combination wrench 18mm• OS4032: adjustable ratcheting combination wrench 19mm
SET OF 12 HEX. SOCKET SPANNERS
OS 4399
8 PCS SCREWDRIVER SET
OS 1099
Contents: • OS4301 : hex socket spanner 8mm• OS4302 : hex socket spanner 9mm• OS4303 : hex socket spanner 10mm• OS4304 : hex socket spanner 11mm• OS4305 : hex socket spanner 12mm• OS4306 : hex socket spanner 13mm• OS4307 : hex socket spanner 14mm• OS4308 : hex socket spanner 15mm• OS4309 : hex socket spanner 16mm• OS4310 : hex socket spanner 17mm• OS4311 : hex socket spanner 18mm• OS4312 : hex socket spanner 19mm
Contents: • OS1001: phillips screwdriver 0x75• OS1002: phillips screwdriver 1x38• OS1003: phillips screwdriver 2x125• OS1004: slotted screwdriver 3x75• OS1005: slotted screwdriver 5.5x38• OS1006: slotted screwdriver 5.5x100• OS1007: slotted screwdriver 6.5x150• OS1008: slotted screwdriver 8x200
-23%
The essentials
FROM 01/05/2020 TO 31/08/2020
25
Users price 28 €VAT Excl.*
26€VAT Excl.
Users price 47 €VAT Excl.*
35€VAT Excl.
Users price 46 €VAT Excl.*
40€VAT Excl.
Users price 54 €VAT Excl.*
48€VAT Excl.
7 PCS SCREWDRIVER TORX SET T10-40
OS 1199
SVCM steel blade PP+TPV Dual material handle DIN ISO 2380 DIN ISO 8764
Contents: • OS1101: torx screwdriver T10x100• OS1102: torx screwdriver T15x100• OS1103: torx screwdriver T20x100• OS1104: torx screwdriver T25x100• OS1105: torx screwdriver T27x100• OS1106: torx screwdriver T30x100• OS1107: torx screwdriver T40x100
IMPACT SOCKETS SET 1/2" D. L.76mm E10-E11-E12-E14-E16-E18-E20-E22-E24
OM 7047
DIN ISO 3121
Contents:• OS3111: torx impact socket E10• OS3112: torx impact socket E11• OS3113: torx impact socket E12• OS3114: torx impact socket E14• OS3115: torx impact socket E16• OS3116: torx impact socket E18• OS3117: torx impact socket E20• OS3118: torx impact socket E22• OS3119: torx impact socket E24
7 PCS T-HANDLE WRENCH SET TORX T10-T40
OS 2199
SVCM steel blade PP+TPV Dual material handle
Contents:• OS2101: T-handle wrench T10x110• OS2102: T-handle wrench T15x110• OS2103: T-handle wrench T20x110• OS2104: T-handle wrench T25x160• OS2105: T-handle wrench T27x160• OS2106: T-handle wrench T30x160• OS2107: T-handle wrench T40x185
7 PCS HEX T-HANDLE WRENCH SET 3-10mm
OS 2099
SVCM steel blade PP+TPV Dual material handle DIN ISO 2396
Contents:• OS2001: T handle screwdriver H3x110• OS2002: T handle screwdriver H4x110• OS2003: T handle screwdriver H5x110• OS2004: T handle screwdriver H6x160• OS2005: T handle screwdriver H7x160• OS2006: T handle screwdriver H8x200• OS2007: T handle screwdriver H10x215
-25%
26 *Recommended user prices, applicable from 01/09/2019 to 31/08/2020. Illustrations are not contractual.
dB80 1,24
MINI DIE GRINDER Ø6mm 25,000rpm
OP 1203
Specifications:• speed: 25,000rpm• length: 159mm
• connection: 1/4"• supply pressure: 6.2bar• consumption: 113l/min
Connector suppliedUsers price 82 €VAT Excl.*
75€VAT Excl.
16 PACK LOCK GRIP PLIERS
OM 8069
Contents: • OM8082 (x3): lock grip pliers 285mm• OM8080 (x5): lock grip pliers 225mm
• OM8083 (x3): lock grip pliers 240mm• OM8081 (x5): lock grip pliers 190mm
Users price 138 €VAT Excl.*
109€VAT Excl.
dB76 1,50
5mm RANDOM ORBITAL PALM SANDER Ø150mm
OP 1311
2.5mm RANDOM ORBITAL PALM SANDER Ø150mm
OP 1312
Specifications: • speed: 12,000rpm • orbit: 5mm • pad: Ø150mm • length: 196mm
• connector: 1/4" • supply pressure: 6.2bar • consumption: 57l/min • net weight: 0.7kg
Specifications:• speed: 12,000rpm• orbit: 2.5mm• plate: Ø150mm• length: 196mm• connector: 1/4"• supply pressure: 6.2bar• consumption: 57l/min
• net weight: 0.7kg• ultra-light composite body
with anti-vibration belt• speed regulator• rear exhaust• Ø32mm connection for cuff• one-handed use
Connector supplied
Users price 229 €VAT Excl.*
199€VAT Excl.
BODYWORK SLIDE HAMMER SET
OC 2211 Contents:• hammer 4.5kg• stroke 50cm• handle with guard• SA4221: pigs tail end• SA4213: long curved hook 6cm• SA4214: short curved hook 4cm• SA4223: 90° hook U• SA4216: 90° hook flat• SA4218: straight end• SA4219: screwed end• SA4220: chain end
Users price 157 €VAT Excl.*
137€VAT Excl.
-21%
The essentials
FROM 01/05/2020 TO 31/08/2020
27
10mm 5 CARBIDE ROTARY RASPS BOX
OM 0643
Specifications:• right cut• diamond gearing• 6mm cylindrical shank• material: carbide
Contents:• Ø10mm cylindrical rasp with straight head• Ø10mm cylindrical rasp with spherical head• Ø9.8mm spherical rasp• conical rasp with pointed head• ogive rasp
Users price 50 €VAT Excl.*
45€VAT Excl.
No preparation work, no need to repaint
INDUCTION DENT REMOVAL
OC 0350
Specifications: Induction heater allows fast and efficient heating of metal and bodywork parts. Control and regulation of the heating time. Excellent way to repair small dents, such as hail. Easy to use and use Time saving through the use of induction technology
Users price 1260 €VAT Excl.*
999€VAT Excl.
Users price 79 €VAT Excl.*
59€VAT Excl.
Users price 202 €VAT Excl.*
149€VAT Excl.
PLASTIC REPAIR KIT
OC 6049
Ideal for small plastic repairs on bumpers, headlight fixings, mirrors, interior trim, etc.
Contents:• SA6042: 1 soldering iron with special soldering tip• SA6081: 6 brazing rods (PP)• SA6082: 6 brazing rods (PS)• SA6083: 6 brazing rods (PE)• SA6084: 6 brazing rods (ABS)• SA6080: 5 pieces of 304 stainless steel grids• soldering iron holder 100
Does not scratch paintwork
UNIVERSAL TELESCOPIC BODYWORK HOLDER 23-138cm
OC 0716
Specifications: • width: 22.5 à 138cm• height: 84 à 132cm• anti-slip rubber-sheathed support arm• support arm length: 86cm• support arm width: 8cm• capacity: 100kg• 4 swiveling wheels, 2 of which have brakes
-25%
-26%