compounded lubricants - btc europe · pdf filecompounded lubricants from ... manual...
TRANSCRIPT
Increasingly heavy loads and longer maintenance intervals require exceptional lubricants. Compounded Lubricants from BASF provide measurable fuel savings, reduce CO2 emissions, maximize component life and reduced downtime for problem-free operation and lower operating costs over the life of the vehicle. When commercial vehicles leave a smaller footprint on the environment, it’s because at BASF, we create chemistry.
Transportation Lubricants
Product SAE Class Application
Features & Benefits OEM approvals
kin. Viscosity@ 40°C[cSt]
kin. Viscosity@ 100°C[cSt]
ViscosityIndex
Pour Point[°C]
Flash Point[°C] N
ort
h A
mer
ica
Eur
op
e
Asi
a
So
uth
Am
eric
a
Axle Oils
Emgard® EP 75W-90 75W-90 Axle – TruckMax drain interval, OEM approvals, sustainability (fuel eco/waste), heat reduction, durability, equipment up time, warranty
§ SAE J306§ API GL-5 and MT-1§ SAE J2360§ Dana SHAES-256 Rev C§ Dana SHAES-429 Rev A§ International TMS-6816§ Mack GO-J Plus§ Meritor O76-N
122 16,6 147 -45 > 200 n n n
Emgard® EP 80W-140 80W-140 Axle – Truck Vocational, OEM approvals, severe duty, heat management, extended drain, durability, warranty
§ SAE J306§ API GL-5 and MT-1§ SAE J2360§ Dana SHAES-429 Rev A§ International TMS-6816§ Mack GO-J§ Meritor O76-B and O80
284 30,6 146 -40 > 200 n n
Emgard® FE 75W-90 (Fuel Efficient) 75W-90 Axle – Truck
Fuel efficient, max drain, OEM approvals, sustainability (fuel eco/waste), heat reduction, durability, equipment up time, warranty
§ SAE J306 § API GL-5 and MT-1 § SAE J2360§ Dana SHAES-256 Rev C§ Dana SHAES-429 Rev A§ International TMS-6816§ Mack GO-J Plus§ Meritor O76-N
103 15,0 152 -45 215 n n n
Emgard® HP 75W-90 75W-90 TDL – Truck Excellent wear and pitting protection for long equipment life
§ SAE J306§ API GL-5 and MT-1§ SAE J2360
111 15,8 152 -54 180 n n n n
Emgard® L/S 2989 75W-90 L /S Drive axle – Class 1-5 Limited slip applications, heat reduction, durability, equipment life, lower gear wear
§ SAE J306§ API GL-5§ Dana ES-PM-M2013
135 17,5 143 -40 > 200 n
Emgard® UAF 4210 75W-110 Axle – Truck / Passenger car Fuel efficient, heat reduction SAE J2360
§ SAE J306§ SAE J2360§ API GL-5§ Scania STO 2:0A
161 23,5 175 -49 > 200 n n n n
Emgard® UAF 4209 75W-90 Axle – Truck Max drain interval, OEM approvals
§ SAE J306 § API GL-5 § MB Approval 235.8 § DAF § MAN 342 Type S-1§ Meritor Europe (Cameri) § Scania STO 1:0§ TATRA§ Volvo Transmission Oil 97312§ ZF TE-ML 05B, 12B, 16F, 17B
115 16,8 160 -50 > 200 n n
Emgard® TDL 75W-85 75W-85 TDL – Commercial and passenger vehicles
Lower viscosity for improved efficiency with excellent wear protection GL-5+ § API GL-5 n
Manual Transmission Oils
Emgard® SAE 50 75W-90(SAE 50) Manual transmission – Truck
Max drain interval, OEM approvals, sustainability (fuel eco/waste), heat reduction, durability, equipment up time, warranty
§ SAE J300§ API MT-1§ Eaton PS-164 Rev 7§ Mack TO-A Plus§ International TMS-6816§ Volvo Transmission Oil 97305§ ZF Freedomline
134 17,5 148 -45 221 n n n
Emgard® MTF 4200 75W-80(SAE 30) Manual transmission – Truck
Max drain interval, OEM approvals, sustainability (fuel eco/waste), heat reduction, durability, equipment up time, warranty
§ SAE J306§ MB Approval 235.29§ Eaton (UK)§ MAN 341 Type E4§ MAN 341 Type VR§ Voith Retarder 153 00090010 § Volvo Transmission Oil 97307
65 10,3 144 -55 220 n n n n
Emgard® MTF 4250 75W-90(SAE 50) Manual transmission – Truck
Max drain interval, OEM approvals, sustainability (Fuel Eco/Waste), heat reduction, durability, equipment up time, warranty
§ SAE J306§ Volvo Transmission Oil 97315 139 18,3 146 -38 235 n n
Automatic Transmission Oils
Emgard® 2805 ATF SAE 20 Automatic transmission – Truck Allison transmission warranty, heat reduction, durability
§ Allison TES-295 (AN-031002) § Allison TES-468§ Allison C-4 (33014203)§ ZF TE-ML 14C§ Voith H55.633636§ Dexron IIIG (G-34746)
38,9 7,6 168 -55 232 n
Typical values only, may deviate from tested value of individual lot.
Portfolio
4 COMPOundEd LuBrICAnTS SELECTIOn GuIdETransportation Lubricants
Product SAE Class Application
Features & Benefits OEM approvals
kin. Viscosity@ 40°C[cSt]
kin. Viscosity@ 100°C[cSt]
ViscosityIndex
Pour Point[°C]
Flash Point[°C] N
ort
h A
mer
ica
Eur
op
e
Asi
a
So
uth
Am
eric
a
Axle Oils
Emgard® EP 75W-90 75W-90 Axle – TruckMax drain interval, OEM approvals, sustainability (fuel eco/waste), heat reduction, durability, equipment up time, warranty
§ SAE J306§ API GL-5 and MT-1§ SAE J2360§ Dana SHAES-256 Rev C§ Dana SHAES-429 Rev A§ International TMS-6816§ Mack GO-J Plus§ Meritor O76-N
122 16,6 147 -45 > 200 n n n
Emgard® EP 80W-140 80W-140 Axle – Truck Vocational, OEM approvals, severe duty, heat management, extended drain, durability, warranty
§ SAE J306§ API GL-5 and MT-1§ SAE J2360§ Dana SHAES-429 Rev A§ International TMS-6816§ Mack GO-J§ Meritor O76-B and O80
284 30,6 146 -40 > 200 n n
Emgard® FE 75W-90 (Fuel Efficient) 75W-90 Axle – Truck
Fuel efficient, max drain, OEM approvals, sustainability (fuel eco/waste), heat reduction, durability, equipment up time, warranty
§ SAE J306 § API GL-5 and MT-1 § SAE J2360§ Dana SHAES-256 Rev C§ Dana SHAES-429 Rev A§ International TMS-6816§ Mack GO-J Plus§ Meritor O76-N
103 15,0 152 -45 215 n n n
Emgard® HP 75W-90 75W-90 TDL – Truck Excellent wear and pitting protection for long equipment life
§ SAE J306§ API GL-5 and MT-1§ SAE J2360
111 15,8 152 -54 180 n n n n
Emgard® L/S 2989 75W-90 L /S Drive axle – Class 1-5 Limited slip applications, heat reduction, durability, equipment life, lower gear wear
§ SAE J306§ API GL-5§ Dana ES-PM-M2013
135 17,5 143 -40 > 200 n
Emgard® UAF 4210 75W-110 Axle – Truck / Passenger car Fuel efficient, heat reduction SAE J2360
§ SAE J306§ SAE J2360§ API GL-5§ Scania STO 2:0A
161 23,5 175 -49 > 200 n n n n
Emgard® UAF 4209 75W-90 Axle – Truck Max drain interval, OEM approvals
§ SAE J306 § API GL-5 § MB Approval 235.8 § DAF § MAN 342 Type S-1§ Meritor Europe (Cameri) § Scania STO 1:0§ TATRA§ Volvo Transmission Oil 97312§ ZF TE-ML 05B, 12B, 16F, 17B
115 16,8 160 -50 > 200 n n
Emgard® TDL 75W-85 75W-85 TDL – Commercial and passenger vehicles
Lower viscosity for improved efficiency with excellent wear protection GL-5+ § API GL-5 n
Manual Transmission Oils
Emgard® SAE 50 75W-90(SAE 50) Manual transmission – Truck
Max drain interval, OEM approvals, sustainability (fuel eco/waste), heat reduction, durability, equipment up time, warranty
§ SAE J300§ API MT-1§ Eaton PS-164 Rev 7§ Mack TO-A Plus§ International TMS-6816§ Volvo Transmission Oil 97305§ ZF Freedomline
134 17,5 148 -45 221 n n n
Emgard® MTF 4200 75W-80(SAE 30) Manual transmission – Truck
Max drain interval, OEM approvals, sustainability (fuel eco/waste), heat reduction, durability, equipment up time, warranty
§ SAE J306§ MB Approval 235.29§ Eaton (UK)§ MAN 341 Type E4§ MAN 341 Type VR§ Voith Retarder 153 00090010 § Volvo Transmission Oil 97307
65 10,3 144 -55 220 n n n n
Emgard® MTF 4250 75W-90(SAE 50) Manual transmission – Truck
Max drain interval, OEM approvals, sustainability (Fuel Eco/Waste), heat reduction, durability, equipment up time, warranty
§ SAE J306§ Volvo Transmission Oil 97315 139 18,3 146 -38 235 n n
Automatic Transmission Oils
Emgard® 2805 ATF SAE 20 Automatic transmission – Truck Allison transmission warranty, heat reduction, durability
§ Allison TES-295 (AN-031002) § Allison TES-468§ Allison C-4 (33014203)§ ZF TE-ML 14C§ Voith H55.633636§ Dexron IIIG (G-34746)
38,9 7,6 168 -55 232 n
5COMPOundEd LuBrICAnTS SELECTIOn GuIdETransportation Lubricants
Axle and Transmission Oils
Industry standard and fleet field fuel economy testing BASF axle fluid Emgard® FE 75W-90 vs. compa-rable fluids: Emgard® FE 75W-90 shows a 1 % fuel economy improvement over comparable fluids.
Proven performance benefitsEmgard® FE 75W-90 fuel efficient synthetic axle lubricant
Financial savings§ Fuel efficiency: less fuel used§ 1 %-plus improvement based on industry
and fleet testing methods§ $820 savings per truck/year (120,000 miles, 6 mpg, $4.10/gal)§ $3,417 per drain interval (500,000 mile drain interval)§ $4,100 over the 5 year warranty period
Longer axle component life§ Reduced gear wear: smoother operation§ Reduced axle sump temperature: increased power§ Improved fluid flow: enables better lubrication
in cold temperatures§ Less frequent maintenance: less oil disposal§ More truck uptime§ Longer component life
Improved protection under extreme conditions§ Better resistance to severe low and high temperatures§ Greater tolerance of missed or extended drain intervals§ Warranty protection ensured§ Genuine OEM equipment
Industry standard fuel economy testingBase: BASF fully synthetic Emgard® SAE 50 in transmission, BASF axle fluid Emgard® FE 75W-90 in axles. Society of Automotive Engineers (SAE) J-1321 test, conducted at independent research institute.
FE axle lubricants
Mineral axle oil
Application
Labeling
Degradability
Toxicity Safety
Health
Ef� ciency
5
Fuel economy improvement summary
Comparable systhetic 75W- 90
SAE test method
SwRI 1.11 % J-1231
Fleet Southwest 1.01 % J-1376
Fleet North 1.03 % J-1526
BASF Ermgard® axle �uid FE 75W-90 showed a 1 % fuel economy improvement over comparable � uids.
Society of Automotive Engineers (SAE) J-1321 test—conducted at independent research company.
Industry standard fuel-economy testing
% Fuel savings FE 75W-90
2.0 %
1.0 %
0.0 %
Group III product SAE 75W-90
in axles
+1.0
Typical synthetic
SAE 75W-90 axle
+1.1
Mineral oil 80W-90 in axle, mineral oil
SAE 80W-90 in transmission
+1.1
Average miles per truck per year: 120,000, 6 mpg. Source: http://www.epa.gov
Carbon dioxide reduction
1 Commercial
truck
175,000Commercial
trucks
Fuel consumption (gallons/year) 20,000 3,500,000,000
Fuel savings with FE (gallons/year) 200 35,000,000
CO2 reduction 4,440 777,000,000
0
1
2
3
4
FE axle lubricants
Mineral axle oil
Application
Labeling
Degradability
Toxicity Safety
Health
Ef� ciency
5
Fuel economy improvement summary
Comparable systhetic 75W- 90
SAE test method
SwRI 1.11 % J-1231
Fleet Southwest 1.01 % J-1376
Fleet North 1.03 % J-1526
BASF Ermgard® axle �uid FE 75W-90 showed a 1 % fuel economy improvement over comparable � uids.
Society of Automotive Engineers (SAE) J-1321 test—conducted at independent research company.
Industry standard fuel-economy testing
% Fuel savings FE 75W-90
2.0 %
1.0 %
0.0 %
Group III product SAE 75W-90
in axles
+1.0
Typical synthetic
SAE 75W-90 axle
+1.1
Mineral oil 80W-90 in axle, mineral oil
SAE 80W-90 in transmission
+1.1
Average miles per truck per year: 120,000, 6 mpg. Source: http://www.epa.gov
Carbon dioxide reduction
1 Commercial
truck
175,000Commercial
trucks
Fuel consumption (gallons/year) 20,000 3,500,000,000
Fuel savings with FE (gallons/year) 200 35,000,000
CO2 reduction 4,440 777,000,000
0
1
2
3
4
6 COMPOundEd LuBrICAnTS SELECTIOn GuIdETransportation Lubricants
Carbon dioxide reductionHelp reduce carbon dioxide emissions with Emgard® FE 75W-90. According to the EPA, each gallon of diesel fuel emits 22.2 pounds of carbon dioxide. Emgard® FE 75W-90 can help reduce CO2 emissions by at least 4,440 lbs/yr per truck.
Eco-friendly performanceCharacteristics of BASF’s Compounded Lubricants.
Carbon footprint
FE axle lubricants
Mineral axle oil
Application
Labeling
Degradability
Toxicity Safety
Health
Ef� ciency
5
Fuel economy improvement summary
Comparable systhetic 75W- 90
SAE test method
SwRI 1.11 % J-1231
Fleet Southwest 1.01 % J-1376
Fleet North 1.03 % J-1526
BASF Ermgard® axle �uid FE 75W-90 showed a 1 % fuel economy improvement over comparable � uids.
Society of Automotive Engineers (SAE) J-1321 test—conducted at independent research company.
Industry standard fuel-economy testing
% Fuel savings FE 75W-90
2.0 %
1.0 %
0.0 %
Group III product SAE 75W-90
in axles
+1.0
Typical synthetic
SAE 75W-90 axle
+1.1
Mineral oil 80W-90 in axle, mineral oil
SAE 80W-90 in transmission
+1.1
Average miles per truck per year: 120,000, 6 mpg. Source: http://www.epa.gov
Carbon dioxide reduction
1 Commercial
truck
175,000Commercial
trucks
Fuel consumption (gallons/year) 20,000 3,500,000,000
Fuel savings with FE (gallons/year) 200 35,000,000
CO2 reduction 4,440 777,000,000
0
1
2
3
4
FE axle lubricants
Mineral axle oil
Application
Labeling
Degradability
Toxicity Safety
Health
Ef� ciency
5
Fuel economy improvement summary
Comparable systhetic 75W- 90
SAE test method
SwRI 1.11 % J-1231
Fleet Southwest 1.01 % J-1376
Fleet North 1.03 % J-1526
BASF Ermgard® axle �uid FE 75W-90 showed a 1 % fuel economy improvement over comparable � uids.
Society of Automotive Engineers (SAE) J-1321 test—conducted at independent research company.
Industry standard fuel-economy testing
% Fuel savings FE 75W-90
2.0 %
1.0 %
0.0 %
Group III product SAE 75W-90
in axles
+1.0
Typical synthetic
SAE 75W-90 axle
+1.1
Mineral oil 80W-90 in axle, mineral oil
SAE 80W-90 in transmission
+1.1
Average miles per truck per year: 120,000, 6 mpg. Source: http://www.epa.gov
Carbon dioxide reduction
1 Commercial
truck
175,000Commercial
trucks
Fuel consumption (gallons/year) 20,000 3,500,000,000
Fuel savings with FE (gallons/year) 200 35,000,000
CO2 reduction 4,440 777,000,000
0
1
2
3
4
7COMPOundEd LuBrICAnTS SELECTIOn GuIdETransportation Lubricants
By using high-performance biodegradable hydraulic fluids from BASF it is possible to mini-mize the potential impact bulldozers and hydraulic excavators have on their surroundings. When the earth-moving and construction industry leaves a smaller footprint on the environment, it’s because at BASF, we create chemistry.
Industrial Lubricants
Products Base FluidOEM approvals Application Features & Benefits
Industrial Gear Oils
Emgard® R&O PAO R&O / Circulating oil General industrial, extended drain, antiwear, heat reduction, durability, equipment life, high temp capable
Emgard® EP PAO Mine haul trucks, electric wheel gear Mine haul trucks, GE/GA wheel motor approval, EP protection, heat reduction, durability, equipment life
Emgard® IND EP PAO Extreme pressure industrial gear General industrial, extended drain, EP protection, heat reduction, durability, equipment life
Plurasafe® GL Plus PAG § Flender BA 7300 A + B§ David Brown Type G lubricant Extreme pressure industrial gear Micropitting resistance, high load capacity, high thermal stability, extended drain intervals, high viscosity index, heat reduction,
durability, equipment life
Plurasafe® GL FG PAG§ Flender BA 7300 A + B§ David Brown Type G lubricant§ NSF registered (FDA compliant components)
Food processing H1 approved, micropitting resistance, load carrying capacity, long life, heat reduction, equipment durability
Plurasafe® GL WI PAG § David Brown Type G lubricant Marine, paper wet end Water insoluble, high load capacity, high thermal stability, extended drain intervals, high viscosity index, heat reduction, durability, equipment life
Bio-Hydraulic Fluids
ProEco® HE 501 Ester§ Bosch-Rexroth§ EU Ecolabel§ Schwedisch Standard
Locks, forestry Biodegradability, environmentally friendly, high performance, EU Ecolabel
ProEco® HE 801 Ester
§ Bosch-Rexroth§ Eaton Vickers 35VQ25§ Eaton Vickers 104C§ HAWE Hydraulic§ ZF TE-ML 07G§ EU Ecolabel§ Japan Ecomark§ USDA Bio Preferred§ Schwedisch Standard
Heavy duty mobile equipment Biodegradability, environmentally friendly, high performance, long life, EU Ecolabel
Plurasafe® Xtreme PAG High volume manufacturing Minimizes leaks in low pressure applications, does not support bacterial growth
Plurasafe® H2O-K PAG Below deck marine Readily biodegradable, leaves no sheen on water, low aquatic toxicity, EPA VGP compliant
Plurasafe® WGF 46 5K PAG Above deck marine Proven performance in 5000 psi pressure applications, leaves no sheen on water, EPA VGP compliant
Fire-Resistant Hydraulic Fluids
Plurasafe® WGF 200 E PAG Metal forming industries FM approved
Plurasafe® WGF FG PAG Food processing FM approved, USDA / NSF H-1 registration
Plurasafe® HL-HFC 46 PAG Mining / Steel Industry
Compressor Oils
Emgard® 2000 Ester Air and refinery compressors General industrial, rotary/reciprocating compressors, high temperature, cleanliness, equipment durability
Emgard® CL-4000 PAO § Burckhardt Compression AG Air compressors General industrial, rotary/reciprocating compressors,
equipment durability, seal and paint compatibility
Plurasafe® CL Gas 9 PAG § Burckhardt Compression AG Hydrocarbon and inert gas compressors Long life, improved efficiency, heat reduction, cleanliness, equipment durability
Plurasafe® CL HC 1400, 1500 PAG Ethylene hyper compressors Long Life, improved efficiency, heat reduction, cleanliness, equipment durability, very high pressures
Plurasafe® CL Air PAG Industrial air compressors Very low sludge or deposit build-up, excellent lubricity
Refrigeration Lubricants
ProEco® S Ester Refrigeration and A /C compressors Hydrolytic stability, optimum miscibility with refrigerants, excellent thermal stability, excellent electrical insulating properties
Plurasafe® RLA PAG Automotive A /C compressors Excellent performance with HFCs and CO2
Specialities
Plurasafe® Quenchant PAG Quenching Lube Quenching applications for aluminium and steel
Plurasafe® HTF 14 PAG Heat Transfer Fluid Heat transfer fluid for high temperature applications up to 250°C
Portfolio
10 COMPOundEd LuBrICAnTS SELECTIOn GuIdEIndustrial Lubricants
Products Base FluidOEM approvals Application Features & Benefits
Industrial Gear Oils
Emgard® R&O PAO R&O / Circulating oil General industrial, extended drain, antiwear, heat reduction, durability, equipment life, high temp capable
Emgard® EP PAO Mine haul trucks, electric wheel gear Mine haul trucks, GE/GA wheel motor approval, EP protection, heat reduction, durability, equipment life
Emgard® IND EP PAO Extreme pressure industrial gear General industrial, extended drain, EP protection, heat reduction, durability, equipment life
Plurasafe® GL Plus PAG § Flender BA 7300 A + B§ David Brown Type G lubricant Extreme pressure industrial gear Micropitting resistance, high load capacity, high thermal stability, extended drain intervals, high viscosity index, heat reduction,
durability, equipment life
Plurasafe® GL FG PAG§ Flender BA 7300 A + B§ David Brown Type G lubricant§ NSF registered (FDA compliant components)
Food processing H1 approved, micropitting resistance, load carrying capacity, long life, heat reduction, equipment durability
Plurasafe® GL WI PAG § David Brown Type G lubricant Marine, paper wet end Water insoluble, high load capacity, high thermal stability, extended drain intervals, high viscosity index, heat reduction, durability, equipment life
Bio-Hydraulic Fluids
ProEco® HE 501 Ester§ Bosch-Rexroth§ EU Ecolabel§ Schwedisch Standard
Locks, forestry Biodegradability, environmentally friendly, high performance, EU Ecolabel
ProEco® HE 801 Ester
§ Bosch-Rexroth§ Eaton Vickers 35VQ25§ Eaton Vickers 104C§ HAWE Hydraulic§ ZF TE-ML 07G§ EU Ecolabel§ Japan Ecomark§ USDA Bio Preferred§ Schwedisch Standard
Heavy duty mobile equipment Biodegradability, environmentally friendly, high performance, long life, EU Ecolabel
Plurasafe® Xtreme PAG High volume manufacturing Minimizes leaks in low pressure applications, does not support bacterial growth
Plurasafe® H2O-K PAG Below deck marine Readily biodegradable, leaves no sheen on water, low aquatic toxicity, EPA VGP compliant
Plurasafe® WGF 46 5K PAG Above deck marine Proven performance in 5000 psi pressure applications, leaves no sheen on water, EPA VGP compliant
Fire-Resistant Hydraulic Fluids
Plurasafe® WGF 200 E PAG Metal forming industries FM approved
Plurasafe® WGF FG PAG Food processing FM approved, USDA / NSF H-1 registration
Plurasafe® HL-HFC 46 PAG Mining / Steel Industry
Compressor Oils
Emgard® 2000 Ester Air and refinery compressors General industrial, rotary/reciprocating compressors, high temperature, cleanliness, equipment durability
Emgard® CL-4000 PAO § Burckhardt Compression AG Air compressors General industrial, rotary/reciprocating compressors,
equipment durability, seal and paint compatibility
Plurasafe® CL Gas 9 PAG § Burckhardt Compression AG Hydrocarbon and inert gas compressors Long life, improved efficiency, heat reduction, cleanliness, equipment durability
Plurasafe® CL HC 1400, 1500 PAG Ethylene hyper compressors Long Life, improved efficiency, heat reduction, cleanliness, equipment durability, very high pressures
Plurasafe® CL Air PAG Industrial air compressors Very low sludge or deposit build-up, excellent lubricity
Refrigeration Lubricants
ProEco® S Ester Refrigeration and A /C compressors Hydrolytic stability, optimum miscibility with refrigerants, excellent thermal stability, excellent electrical insulating properties
Plurasafe® RLA PAG Automotive A /C compressors Excellent performance with HFCs and CO2
Specialities
Plurasafe® Quenchant PAG Quenching Lube Quenching applications for aluminium and steel
Plurasafe® HTF 14 PAG Heat Transfer Fluid Heat transfer fluid for high temperature applications up to 250°C
COMPOundEd LuBrICAnTS SELECTIOn GuIdEIndustrial Lubricants 11
Bio-Hydraulic Fluids
Sustainable chemistry based on renewable raw materialsBASF provides a full range of high-performance, bio-hydraulic fluids. With excellent high- and low-temperature performance, good seal compatibility, superior oxidative and hydrolytic stabi-lity, foam resistance and equipment protection, our products offer extended drain intervals and are recommended for use in all environmentally sensitive areas. Based on patented renew-able ester technology that is readily biodegradable, they meet or exceed key national and global eco-standards including those pertaining to the EU Ecolabel.
From nature to natureLife cycle of BASF’s bio-hydraulic fluids
Fossil contentBio-based content
Dry TOST ISO 4263-3—measures oil life
Typical performance bio-lubricants at 95 °C in presence of Fe/Cu
4,000
3,000
2,000
1,000
0
ProEco® HE 801
Dry TOST > 4000 Hrs.
TMP 05 Vegetableoils
Ho
urs
Air release—ASTM D 3427
Recovered density by air release
100 %
99 %
98 %
97 %0 min 2 min 4 min 6 min 8 min 10 min 12 min
ProEco® HE 801-46 ≤ 1 min
Mineral oil based hydraulic � uid ≥ 5 min
Competitive saturated ester based hydraulic � uid ≥ 7 min
Degradation
Waste
Utilization
Processing Processing
Oleochemicals
Triglycerides waxes
Extraction
Biomass
Biosysthesis
EnergyCO , H O2 2
nutrients
Oleochemical specialty products
ProEco 801
Mineral Hydraulic Oil
application
5
labeling
degradability
toxicity safety
health
ef� ciency
1
2
0
4
3
BASF ProEco® HE 801 bio-hydraulic fluidBio-based content analysis
BASF ProEco® HE 801hydraulic fluidMean bio-based result: 99 %;Proportions bio-based vs.fossil-based, indicated by14c content
Specifications:§ ISO 15380§ VDMA 24568 HEES
Environmental performance labels:§ EU Ecolabel (Europe)§ MIA Vamil (Netherlands)§ Swedish Standard SS 15 54 34 (Nordic)§ USDA Biopreferred Product Listing§ Japanese Eco Label (Pending)§ Canadian Eco Label (Pending)
OEM approvals / specifications:§ Caterpillar BF-2§ Bosch Rexroth RD90221-1§ Eaton Vickers V-104C§ Eaton Vickers 35VQ25§ HAWE Hydraulic
Typical bio-hydraulic fluid
Mean bio-based result: 4 %Proportions bio-based vs.fossil-based, indicated by14c content
Fossil contentBio-based content
Dry TOST ISO 4263-3—measures oil life
Typical performance bio-lubricants at 95 °C in presence of Fe/Cu
4,000
3,000
2,000
1,000
0
ProEco® HE 801
Dry TOST > 4000 Hrs.
TMP 05 Vegetableoils
Ho
urs
Air release—ASTM D 3427
Recovered density by air release
100 %
99 %
98 %
97 %0 min 2 min 4 min 6 min 8 min 10 min 12 min
ProEco® HE 801-46 ≤ 1 min
Mineral oil based hydraulic � uid ≥ 5 min
Competitive saturated ester based hydraulic � uid ≥ 7 min
Degradation
Waste
Utilization
Processing Processing
Oleochemicals
Triglycerides waxes
Extraction
Biomass
Biosysthesis
EnergyCO , H O2 2
nutrients
Oleochemical specialty products
ProEco 801
Mineral Hydraulic Oil
application
5
labeling
degradability
toxicity safety
health
ef� ciency
1
2
0
4
3
12 COMPOundEd LuBrICAnTS SELECTIOn GuIdEIndustrial Lubricants
Fossil contentBio-based content
Dry TOST ISO 4263-3—measures oil life
Typical performance bio-lubricants at 95 °C in presence of Fe/Cu
4,000
3,000
2,000
1,000
0
ProEco® HE 801
Dry TOST > 4000 Hrs.
TMP 05 Vegetableoils
Ho
urs
Air release—ASTM D 3427
Recovered density by air release
100 %
99 %
98 %
97 %0 min 2 min 4 min 6 min 8 min 10 min 12 min
ProEco® HE 801-46 ≤ 1 min
Mineral oil based hydraulic � uid ≥ 5 min
Competitive saturated ester based hydraulic � uid ≥ 7 min
Degradation
Waste
Utilization
Processing Processing
Oleochemicals
Triglycerides waxes
Extraction
Biomass
Biosysthesis
EnergyCO , H O2 2
nutrients
Oleochemical specialty products
ProEco 801
Mineral Hydraulic Oil
application
5
labeling
degradability
toxicity safety
health
ef� ciency
1
2
0
4
3
dry TOST ISO 4263-3—measures oil lifeTypical performance: Bio-lubricants at 95 °C in presence of Fe/Cu
Fossil contentBio-based content
Dry TOST ISO 4263-3—measures oil life
Typical performance bio-lubricants at 95 °C in presence of Fe/Cu
4,000
3,000
2,000
1,000
0
ProEco® HE 801
Dry TOST > 4000 Hrs.
TMP 05 Vegetableoils
Ho
urs
Air release—ASTM D 3427
Recovered density by air release
100 %
99 %
98 %
97 %0 min 2 min 4 min 6 min 8 min 10 min 12 min
ProEco® HE 801-46 ≤ 1 min
Mineral oil based hydraulic � uid ≥ 5 min
Competitive saturated ester based hydraulic � uid ≥ 7 min
Degradation
Waste
Utilization
Processing Processing
Oleochemicals
Triglycerides waxes
Extraction
Biomass
Biosysthesis
EnergyCO , H O2 2
nutrients
Oleochemical specialty products
ProEco 801
Mineral Hydraulic Oil
application
5
labeling
degradability
toxicity safety
health
ef� ciency
1
2
0
4
3
Air release—ASTM d 3427
Fossil contentBio-based content
Dry TOST ISO 4263-3—measures oil life
Typical performance bio-lubricants at 95 °C in presence of Fe/Cu
4,000
3,000
2,000
1,000
0
ProEco® HE 801
Dry TOST > 4000 Hrs.
TMP 05 Vegetableoils
Ho
urs
Air release—ASTM D 3427
Recovered density by air release
100 %
99 %
98 %
97 %0 min 2 min 4 min 6 min 8 min 10 min 12 min
ProEco® HE 801-46 ≤ 1 min
Mineral oil based hydraulic � uid ≥ 5 min
Competitive saturated ester based hydraulic � uid ≥ 7 min
Degradation
Waste
Utilization
Processing Processing
Oleochemicals
Triglycerides waxes
Extraction
Biomass
Biosysthesis
EnergyCO , H O2 2
nutrients
Oleochemical specialty products
ProEco 801
Mineral Hydraulic Oil
application
5
labeling
degradability
toxicity safety
health
ef� ciency
1
2
0
4
3
13COMPOundEd LuBrICAnTS SELECTIOn GuIdEIndustrial Lubricants
Our Global Production FootprintGlobal Support for Our Customers
BASF Production Sites Are Located Close to Our Markets
EO / MEG Plants
1 Ludwigshafen, Germany 3 Antwerp, Belgium4 Nanjing, China
Compounded Lubricant Plants 2 Düsseldorf, Germany 5 Shanghai, China 8 Jacarei, Brazil 11 Cincinnati, OH, USA
Gasoline / diesel Performance Packages 1 Ludwigshafen, Germany 7 Guaratingueta, Brazil 12 Geismar, LA, USA 13 Bayonne, NJ, USA
Coolant Plants / Brake Fluid Plants 1 Ludwigshafen, Germany 5 Shanghai, China 6 Thane, India 7 Guaratingueta, Brazil 9 Lerma, Mexico 10 Glysantin® Technology:
Valvoline (Ashland Inc.), Lexington, KY, USA
3
7
4
6
5
21
9
11
12
13
8
10
AsiaBASF East Asia RHQ LtdFuel and Lubricant Solutions45/F, Jardine House, No. 1 Connaught PlaceCentral, Hongkong
EuropeBASF SEFuel and Lubricant Solutions67056 Ludwigshafen, Germany
north AmericaBASF CorporationFuel and Lubricant Solutions100 Park Avenue, Florham Park,New Jersey 07932, USA
South AmericaBASF S.A.Fuel and Lubricant SolutionsAv. das Nações Unidas, 14.171, Morumbi, 04794-000Sao Paulo, SP, Brazil
Contact:[email protected][email protected]
www.basf.com/lubes
BASF SEFuel and Lubricant Solutions
67056 Ludwigshafen, Germanywww.basf.com/fuel-lubricant-solutions
EV
O 1
328e
®
= r
eg. t
rad
emar
k of
BA
SF
SE
The descriptions, designs, data and information contained herein are presented in good faith, and are based on BASF’s current know ledge and experience. They are provided for guidance only, and do not constitute the agreed contractual quality of the product or a part of BASF‘s terms and conditions of sale. Because many factors may affect processing or application/use of the product, BASF recommends that the reader carry out its own investigations and tests to determine the suitability of a product for its particular purpose prior to use. It is the responsibility of the recipient of product to ensure that any proprietary rights and existing laws and legislation are observed. No warranties of any kind, either expressed or implied, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set forth herein, or that the products, descriptions, designs, data or information may be used without infringing the intellectual property rights of others. Any descriptions, designs, data and information given in this publication may change without prior information. The descriptions, designs, data, and information furnished by BASF hereunder are given gratis and BASF assumes no obligation or liability for the descriptions, designs, data or information given or results obtained, all such being given and accepted at the reader’s risk. (08/2013)