COMPANY PROFILECOMPANY PROFILE

M.T. SrlM.T. Srl

The Mediterranean Aerospace Society SAM is composed by fifteen SMEs operating in the aeronautic and space sector. SAM, a simultaneous engineering system, is one of

the first Italian example of SMEs aggregation in the aerospace sector.

SAM has been founded to both meet market needs and take advantage of all the development opportunities coming from national and international economic recovery.

COMPANY PROFILECOMPANY PROFILE

Headquarters Via G. Pascoli. 780026 CasoriaNaples - Italy

2005 Data(aggregated data)

Employed 1065

Sales proceeds 115 M€

R&D Investments 10 M€

BOARD OF DIRECTORSBOARD OF DIRECTORS

M.T. SrlMr. Vincenzo Buonocore

FOX BIT SrlMr. Antonio Scarpetta

GEVEN SrlMr. Getulio Veneruso

MAGNAGHI Aeronautica SpaMr. Paolo Graziano

MAROTTA SrlMr. Pasquale Grosso

SALVER SrlMr. Paolo Graziano

VULCAN AIR SpaMr. Carlo De Feo

TECHNOSYSTEM SrlMr. Francesco Monti

TECNOIN SrlMr. Davide Sala

TECNAM SrlMr. Amedeo Fogliano

CARLO GAVAZZI SPACE SpaMr. Lanfranco Zucconi

PRESIDENTMr. Luigi Iavarone

NUOVA AVIORIPRESE SrlMr. Salvatore Savanelli

ACTIVITIESACTIVITIES

design, manufacturing and aircraft maintenance activities,

development and manufacturing of mechanical and electronic apparatus for aeronautic-space industry

advanced technology services on earth observation implemented

through satellite and avionic platforms for monitoring and

surveillance of territorial environment parameters

IND

US

TR

Y

SE

RV

ICE

S

INDUSTRYINDUSTRY

TECHNOLOGY SKILLS

SPACE SECTOR

general aviation aircraft design and manufacture

general and commercial aviation aircraft maintenance and fixing

avioelectronic board programmes’ upgrading territorial monitoring by multispectrum

sensors crew and technical staff training and

qualification interiors and structures mechanical and

electronic designing aircraft carrier certifications and interiors

manufacture and/or maintenance prototyping and reverse engineering patterns ratification aircraft’s subsystems mechanical and

electronic production software development No-destructive controls and surface

treatments aerospace qualification and testing

design and manufacturing of space infrastructures and payloads for scientific and commercial missions, environmental monitoring, telematic and applications

design, development and manufacturing of on board and ground electronic equipment

AERONAUTIC SECTOR

SERVICESSERVICES

EARTH OBSERVATIONEARTH OBSERVATION

Integrated earth observation system through satellite and

avionic platform using multisensor technologies and

possessing operating characteristics enabling data

acquisition via diverse sensors in a single mission

ground segment whichguarantees data in the field of

Geographic Information 24/7 for environmental monitoring and

surveillance services, mapping and value added information for GIS

and DDS systems

Characteristics

SERVICESSERVICES

EARTH OBSERVATIONEARTH OBSERVATION

Mini Satellite Italiano a Tecnologia Avanzata (MITA)

Mini Satellite Italiano a Tecnologia Avanzata (MITA)

P68 OBSERVER Monitoraggio della frana di Sarno (NA)

Monitoraggio della frana di Sarno (NA)

Italian advanced technologyMini Satellite (MITA)

Landslide monitoring of Sarno area (Naples)

P68 OBSERVER

Mapping of burnt areas

Monitoring of hydro-geological instability

Monitoring of urban environments

Monitoring of rubbish dumps

Mapping of vegetation and agricultural areas

Applications

THE COMPANIESTHE COMPANIES

M.T. SrlM.T. Srl

AXITUDE

M.T. S.r.l.

P68

Aircraft Division

Design, Research & Development

Planning & Production

Marketing & Customer Support

Technical assistance

Spares upgrading

Training

Maintenance Division

GENERAL AVIATION• A/C reconfiguration• Major maintenance check

and modifications• Line maintenance

COMMERCIAL AVIATION• ATR 42-300/320 SERIES • ATR 72-200 SERIES • MD 80

Flight Operations Division

Aerial Survey

Ortho-photogrammetry

Map making

Thermography

Cartography and Topography

Aero photography

Public transport pax and freight

Flight school

Today production :

P 68 C

P 68 C – TC

P 68 OBSERVER 2

P 68 TC OBSERVER

AP 68 TP – 300 / 600

SF 600A

New type

Vulcan Air SpaVia G. Pascoli 7, 80026 Casoria– Italy

Tel. 0039-081 59 18 111Fax 0039-081 59 18 173

E-mail info@vulcanair.comWebsite www.vulcanair.com

AXITUDE S.r.l.Via G. Pascoli, 7

80026 Casoria (NA) – ItalyTel. 0039-081 59 18 132

Fax 0039-081 59 18 172

Mission Design and Manufacturing of advanced avionic systems for General Aviation

Applications and related fields: - Avionics- Platform Stabilization- Unmanned Vehicle Navigation

Product line

The company has experienced human resources to enable it to succeed in his mission and its guidelines for all its personnel will be to turn their experience and confidence into valuable assets for all customers.

Attitude & Heading Reference System (AHRS) PFD/MFD 4D-Nav (Synthetic Vision, Tunnel into the sky, Map Viewer) Standard/Custom Engine Monitor Integrated Modular Avionics

AHRS

The Key Factor: Human resources

1a Trav.Via G.Pascoli - 80026 Casoria Napoli (Italy)

Tel. 0039-081 75 83 210 Fax. 0039-08175 84 528

E-mail catecnam@tin.itWebsite www.tecnam.com

PR

OD

UC

TS

P96 GOLF P92-JS

P92-2000 RG

S.R.L. Costruzioni Aeronautiche Tecnam was founded in 1986 by F.lli Pascale. The company is located in an area adjacent to the International Airport of Napoli-Capodichino with an establishment measuring over 11000 square meters. A second establishment is located in Castelvolturno and features the final assembly line, and a flight field where flight tests are carried out. The Company's interests are divided into two main activities: The first pertains to the construction and assembly of structural components for commercial aviation; among these components are the tailplanes for the ATR 42/72, fuselage panels for Douglas and Boeing, parts of the G222, tailplanes and moving surfaces for the SF260, fuselage elements for the P68, helicopter components for Agusta, and other parts for LearJet, Falcon, Dornier, etc. The Company has obtained official qualification for the use of all above mentioned equipment and is ISO 9002 certified by Alenia, Aeronavali, Aermacchi, Agusta and, for what concerns special processes, also by Douglas/Boeing.

Furthermore, the Company is certified by the Registro Aeronautico Italiano (cit. n. 1004/c) with regards to the production of P92-J aircraft. The other sector of activity pertains, in fact, to the design and manufacture of prototypes and production units for light or ultralight aviation. Since 1992, Tecnam, drawing on an uncommon field experience of their founders, has entered this market internationally with noteworthy results and nearly 500 aircraft produced. The distribution network of Tecnam aircraft can rely today on dealers in all major countries.The Company's strategy is particularly dedicated on investing resources in research and development with the aim of continued refinement and upgrading of its products.

The advanced ultralight:The advanced ultralight:

high wing and retractable gearhigh wing and retractable gear

GEVEN has a long established experience and a world-wide recognised knowledge in providing seating and interiors solutions for aerospace, shipping and railway applications.

GEVEN is capable to:GEVEN is capable to:• design• manufacture• assembly • test• certify• produce• maintain• support• refurbishaircraft interiors and passenger seating solutions

GEVEN is Certified by the JAA through ENAC-RAI as:- JAR 21 (G) Production Organisation- JAR 145 Maintenance Organisation

ManufacturesManufactures• ALENIA• AERONAVALI• ATR• AGUSTA• PIAGGIO• HELISOTA• FOKKER• VULCANAIR• TECNAM• INDONESIAN AEROSPACE

Airlines & OperatorsAirlines & Operators• ALITALIA• ATITECH• MERIDIANA• AIR ONE• LAUDA AIR• BLUE PANORAMA• US NAVY• LAER• INDONESIAN AIR FORCE• ITALIAN AIR FORCE• COTE D’IVOIRE

Product support Product support servicesservices•Spare parts•Initial provisioning assistance

•A.O.G.•warranty•Engineering support•training•consignment stock•maintenance•repair and overhaul•refurbishment•field service

MAIN CUSTOMERSMAIN CUSTOMERS

Maintenance, repair and Maintenance, repair and refurbishment refurbishment

of the following aircraft interiors :of the following aircraft interiors :•DC-9•MD80•ATR 42•ATR 72•B707•DC-10•Learjet 45•Cessna Citation

Geven SrlGeven SrlViale delle Industrie, 9 - Po. Box 97 - 80040 S.Sebastiano al Vesuvio NAPOLI – ITALYViale delle Industrie, 9 - Po. Box 97 - 80040 S.Sebastiano al Vesuvio NAPOLI – ITALY

Tel. 0039-081 78 69 111 Fax 0039-081 77 16 763Tel. 0039-081 78 69 111 Fax 0039-081 77 16 763E-mail geven@geven.com - Website www.geven.comE-mail geven@geven.com - Website www.geven.com

MA

GN

AG

HI

AER

ON

AU

TIC

A S

.p.A

.M

AG

NA

GH

I A

ER

ON

AU

TIC

A S

.p.A

.Magnaghi was born in 1936 as company working in aeronautical field (military only) producing, landing gears, fuel tank, tank oil, engine components . Beginning from the ‘70 it begun to operate in the civil area too in collaboration with Messier, both in the engineering and on license construction field. In the same years it has autonomously begun the same activities in the helicopter sector. In 1998 the fusion has happened with the Magnaghi Milano.

From 1994 Magnaghi suffered the crisis that has involved the Italian and foreign aeronautical sector. In 2001 it has been finalised the sale to Panavia (Company of INVESCO, the Holding of Graziano group) of Magnaghi Aerospace activity branch, located in Naples plant. On December 2001 the Panavia has changed its name into Magnaghi Aeronautical Spa.

Messier Dowty LTD (U.K.), Smiths LTD (U.K.), Messier Dowty SAS (FRANCE), Messier Bugatti (FRANCE), Hydraulic Research Textron (U.S.A.), Apph (U.K.), Embraer (BRASIL), Lochkeed Martin (U.S.A.)

ALENIA: G222 – C27J –MD80

ALENIA – AERMACCHI – EMBRAER: AM-X

AERMACCHI: MB339K – S211 – SF600

AEROSPATIALE – ALENIA: ATR42-500 – ATR72

AIRBUS INDUTRIES:A300600 – A319 – A320 – A321

AGUSTA BELL: AB205 – AB206

NAMSA TORNADO (TYPHOON)

AGUSTA BOEING: CH47

R.PIAGGIO: P180

AGUSTA SIKORSKY: SH3D – HH3F

MESSIER DOWTY LTD – DASA: EF2000

AGUSTA: NH90

EH INDUSTRIES

MCDONNEL DOUGLAS: MD80

MMAAIINN

PPRROOGGRRAAMMSS

INTERNATIONAL COOPERATIONSINTERNATIONAL COOPERATIONSMagnaghi Aeronautica Spa

Via G. Ferraris 76, 80142 Napoli – ItalyTel. 0039-081 59 77 268 Fax 0039-081 73 40 648

E-mail gboschi@magnaghiaeronautica.it

SALVER SpaSALVER Spa

MAJOR CUSTOMERSMAJOR CUSTOMERS

Alenia/BoeingEADS DornierDornier FairchildOfficine AeronavaliPiaggio Aero IndustriesAermacchiAgusta

AERONAUTIC FIELDAERONAUTIC FIELD Assembly of composite, mixed and metal parts through bonding and fastening Production of composite aeronautic products (primarily using thermosetting prepregs) Research and development of advanced aeronuatic parts Project, design and manufacturing of tools necessary to production activities

Salver SpaVia D. Macaluso,

72100 Brindisi – ItalyTel. 0039-0831 57 31 45

Fax 0039-0831 57 38 78

INVESCO ACQUISITION : 1989INVESCO ACQUISITION : 1989

MAIN ACTIVITIES: RIGID PIPELINES MANUFACTURING AND ASSEMBLING, MAIN ACTIVITIES: RIGID PIPELINES MANUFACTURING AND ASSEMBLING, MAINTENANCE AND SURFACE TREATMENTS OF AIRCRAFT MAINTENANCE AND SURFACE TREATMENTS OF AIRCRAFT STRUCTURAL PARTS AND COMPONENTSSTRUCTURAL PARTS AND COMPONENTS

20012001 20022002 2003 2003 2004 2005 2004 2005 **

NO. OF EMPLOYEESNO. OF EMPLOYEES 35 35 35 35 37 37 37 37 37 37

TURNOVER EURO/MILLION 2,5TURNOVER EURO/MILLION 2,5 2,7 3,2 2,7 3,2 3,5 3,5 3,7 * forecast 3,7 * forecast

METAL SUDMETAL SUDMETAL SUDMETAL SUD

APPROVALS/CERTIFICATION:APPROVALS/CERTIFICATION: CUSTOMERSCUSTOMERS PRODUCTSPRODUCTS

° ALENIA° ALENIA ° ALENIA° ALENIA ° AIRCRAFT RIGID ° AIRCRAFT RIGID PIPELINEPIPELINE

° AIRBUS° AIRBUS ° AMS° AMS ° NON DESTRUCTIVE ° NON DESTRUCTIVE CONTROLSCONTROLS

° BOEING° BOEING ° OFFICINE AERONAVALI° OFFICINE AERONAVALI ° SURFACE ° SURFACE TREATMENTSTREATMENTS

° AGUSTA° AGUSTA ° AGUSTA° AGUSTA ° ° HEAT TREATMENTSHEAT TREATMENTS

° AERMACCHI° AERMACCHI ° AERMACCHI° AERMACCHI ° EPOXIDE AND ° EPOXIDE AND POLYURETHANEPOLYURETHANE

° ALITALIA° ALITALIA ° ALITALIA ° ALITALIA PAINTINGSPAINTINGS

° AQAP 120° AQAP 120 ° FIAT AVIO° FIAT AVIO

° ISO 9002° ISO 9002

° JAR 145° JAR 145

° EN 9100 (By October 2004)° EN 9100 (By October 2004)

INVESINVESCOCO

IN

VES

CO

S.p

.A.

INV

ES

CO

S.p

.A.

Marotta A.T. S.r.l. was founded as the evolution of Marotta S.r.l specialists in the production of mechanical precision components and has been present on the market since 1957.

The traditional production techniques have been substituted by completely automated processes through the use of a Numerical Computerised Control machine (CNC) and controlled by traditional and electrical equipment. The production area of the company covers a superficial area of around 1500mq sub-divided into specialist areas.

Marotta A.T. uses a Numerical Computerised Control machine controlled by traditional and electrical equipment and CAD/CAM in the production and continuing updates in real time with the planning area. The company has developed relevant "know how" in mechanical construction and in the processes contained in high level technology that is used by the majority of Italian companies such as Alenia Marconi Systems.Actual aeronautic production is orientated to the provision of finished mechanical parts and assembled for the civil and military aeronautic industry. Marotta A.T. produces structural parts for planes such as ATR 42 and 72, AIRBUS A320, MD Douglas MD80, etc., but also realises components for the missile industry.

Marotta A.T. has become referral specialists on national territory, in the realisation of equipment for aerodynamic tests (wind tunels) and telescopes. In the last few years Marotta A.T. has achieved positive results in space sector, with the realisation of significant pieces for company leaders such as Carlo Gavazzi Space S.p.A. and M.A.R.S. (Microgravity Advanced and Support Center) and C.I.R.A. (Centro Italiano di Ricerca Aerospaziale [Italian Centre for Aerospace Research]).

The technologies developed for the mechanical processes today allow Marotta A.T to accurately execute flow panel and oxygen panels (PSU) repair works on aeroplanes used for public transport (MD Douglas Super 80, ATR 42, etc). The high standard of execution is applied to the revision/repair of aeronautic boilers, water heaters and ovens used by European airine companies. The complex control techniques used in the mechanical processes are applied in the functionality control of the thermal switch and probes to record temperature. All the maintenance/repair activity executed by Marotta A.T. certified by the National Civil Aviation Body according to the European JAR 145 standard are certificated by the issue of JAA Form One that guarantees the aero-navigability.

FIRM ACTIVITIESFIRM ACTIVITIES

• Aerial black/white and colour for production of cartography

• Thematic and synthesis cartography

• Aerial and terrestrial Photogrammetry

• Planning and realization of informative territorial systems

• Fallowing analysis to the aerial resumptions for the state of erosions of the coasts

• Infrared colour for the study of the state of health arboreal essence

• Thermograph and infrared colour for the location in the sea of pollute area and ubication of possible loss of possible loss of hidro-systems conduct

• Ortophoto- paper

• DTM territory whit Lidar

• Systems for sight fire

• Cartography

• Georadar surveying

FLIGHT OPERETING FURNISCING FLIGHT OPERETING FURNISCING

Nr.2 navigation system GPS inerzial traker   Nr.1 camera aerofotogrammetry Wild RC20 munita FMC con obiettivi intercambiabili da 153 e 300 mm    Nr.1 camera aerophotogrammetry Zeiss Jena LMK 1000 with focal 153 mm and FMC    Nr.1 camera aerophotogrammetry Zeiss Top 15 with focal 153 mm and FMC    Nr.1 camera Wescam 16 DS-M termical imaging    Nr.1 camera digital Nikon D1X with optical calibrate 20 mm

  TECHNICAL DEPARTEMENT FURNISCINGTECHNICAL DEPARTEMENT FURNISCING

Nr.3 Work-station for ortophoto-paper digital mod. DVP    Nr.3 Satellite reciver geodedic G.p.s.    Nr.3 Bromografi Zeiss tipo Zeiss KG 30    Nr.1 Developer to print and/or slides contacting Eskofot    Nr.1 Developer to print and/or slides contacting Colenta    Nr.1 Scanner photogrammetric LHZ DSW 500    Nr.1 Scanner Umax Mirage D16-L Nr.1 Developer Film Colenta mod. 30 SW-N    Nr.2 Plotter HP5000PS UV e DMP 60 Houston Instrument    Nr.1 Work-station per ortophotopaper digital mod. Apex 7.0    Nr.10 Work-station to elaborate firm data

CARLO GAVAZZI SPACE SpA

FFIIEELLDDSS

OOFF

AACCTTIIVVIITTIIEESS

Milano • Bologna • Rivalta Scrivia (AL) • S. Giorgio del Sannio (BN)Headquarters: Via Gallarate 150, 20151 Milano – Italy

Tel. 0039.02.380481 Fax 0039.02.3086458 - email cgs@cgspace.it - web: www.cgspace.it

PPRROOFFIILLEE

Carlo Gavazzi Space develops space systems and technologies for Italian and international projects and is part of a cluster of European companies.Its core business is design and manufacturing of satellites and payloads for scientific and commercial missions, unmanned space vehicles, environmental monitoring, telematic and applications.

Founded in 1981, the company employs more than 180 qualified engineers and physicists working in close cooperation with the leading Italian research organisations.

ASI Italian Space Agency, CIRA (Italian Aerospace Research Centre), CNES (French Space Agency), CERN (European Centre for Nuclear Research), CNR (Italian National Research centre), ESA European Space Agency, INFN (Italian Institute for Physics Research), NASA (U.S. Space Agency), E.U. and all main European space manufacturers.

CCUUSSTTOOMMEERRSS

ESA Data User Programs for environmental monitoring

International Space Station Facilities & Payloads

• Prime contractor at system and/or subsystem level• Satellites: turn-key systems with standard platforms• USV unmanned space reusable vehicles• Payloads and scientific instruments for experiments in microgravity• International Space Station: facilities and payloads• Ground Segment and Ground Support Equipments• Scientific instruments for remote sensing and environmental monitoring• Systems and Services for Earth Observation • Commercial applications of space technologies for security, telemedicine, fleet management, surveillance• Software Projects • SAR image processing• E.O. image compression• Digital and Power electronics• Structural /Thermal research projects • AIT activities (Assembly,Integration,Test)• Product Assurance & Safety

Via E. Gianturco, 31 Napoli - Italy Tel. 0039-081 73 40 777 Fax 0039-081 73 40 808E-mail info@foxbit.it - Website www.foxbit.

Fox Bit covers all the aspects of the industrial engineering – time to product compression, through the integration of the most up-to-date systems based on the 3D laser scansion, CAD design, structural and dimensional analyses (FEA - CAE/CAT), and industrialization (CAM).

Fox Bit has created to the inside of the own competencies a Space Section that has extended also to the electronics and computer science the traditional mechanical acquaintances of the society.

CU

ST

OM

ER

S

SPACE:ASIMARSOerlikon ContravesAlenia Spazio Roma

AERONAUTIC:Alenia AeronauticaFiat AvioGevenTecnamOfficine PartenopeeAvio Interiors

AUTOMOTIVE:FerrariFiat AutoElasisStola

CMA SOLARCMA SOLAR

AIRBUS - A380AIRBUS - A380

Electronics

FPGA TechnologyModules for audio and video signals, digital or analogic.High speed interfaces for telemetry / remote controlAnalogic and digital devices for fixed telephony or GSM

Software and Information TechnologyOn Board SWOn Ground SW/ EGSESpecial and Industrial installation ControlUtilization of PLC. Development of control SWManagement of field and computer science net

Mechanics

CAD Design (ProEngineer, Unigraphics, Catia, CADDS)Reverse Engineering using 3D laser scanning CAD Structural and Dimensional Analyses (FEA - CAE - CAT)Product industrialization (CAM)Mechanical Rapid Prototyping

G.L.A.D. Experiment ContainersMARSIS EGSE & MARSIS SPARE-EGSESAR 2000 – EGSE A.I.S. (Antenna Interface Simulator)CPD Coarse Pointing DeviceMDS Mice Drawer System - External ContainerSAR 2000 Frequency Generation Unit (FGU) DeviceMillimetric Radar MMWAGILE Payload

Airbus A380: Structural design of the upper-center Fuselage sectionBoeing 767 - New Interiors ConfigurationATR42 Large Cargo Door Surround: Structural design - Stress AnalysisATR72 Large Cargo Door: Structural design - Stress Analysis

Space Programs

Aeronautic Programs

AC

TIV

ITIE

S

MARSIS EGSEMARSIS EGSE

TECNO IN is an engineering service company with many years experience, providing an authoritative reference-point for public and private customers.

The solution of problems relating to the reliability and safety of civil, industrial and monumental works is just part of the daily routine carried out with rigorous precision by technical staff of TECNO IN.

The highly qualified technicians offer guaranteed experience in the laboratory and in the field, by means of research, accurate analyses and thorough quality control of structures and construction materials.

This company employs engineers, architects, geologists and building surveyors, and boasts extensive competence in various operational fields, ranging from instrumental diagnosis to monitoring and from geotechnics to geophysics.

All TECNO IN services are the state-of-the-art support to modern control engineering.

TECNO IN S.p.A.Registered office

Head offices and laboratories :II Trav. Strettola S. Anna alle Paludi, 11

80142 NapoliTel. +39 081/5634520 - fax +39

081/5633970Viale Parioli, 55/a

00197 RomaTel. +39 06/8080362 - fax +39 06/8074672

tecnoin@cybernet.it - www.tecnoin.it

FIELDS OF ACTIVITYFIELDS OF ACTIVITY

Laboratorychemical – environmental  steel, concrete and cementsoil, rock and bitumenresearch

Topography and monitoring altometric surveys and tests  video prospecting  structural monitoring  environmental monitoringsub-service researchunderwater surveying

On site investigationsstructural identification tests  diagnosis and non destructive testsvibrometry – dynamic analysis

Geology, Geotechnics, Geophysics geological surveys on site geological tests  georadar - magnetism seismic and geoelectricity  archeological surveys  hydrogeology

Techno System (TS) is a fully private company, founded in 1977, specialised in the design, development and manufacturing of on board and ground electronic equipment for space applications. TS develops electronic systems, subsystems and units on a on a custom based “turn key” approach.

Thanks to its technical team composed of highly skilled electronic and space engineers and by ESA qualified technicians and thanks to state of art facilities and developing tools TS is fully autonomous in Program management, System engineering and design, Detailed electronic design, Board manufacturing and testing Unit, subsystem and system integration and testing, Qualification and Documentation.

- On board handling and control unit- Image processing and compression unit- Control and data acquisition system for

scientific payloads and instruments- High resolution digital video systems- Telemetry and telecommand system- Electronic ground support equipment- Battery and power distribution unit- Actuator driver unit

VIRTIS EGSE

PPRROODDUUCCTTSS

CCOOSSTTUUMMEERRSS

European Space Agency,

Italian Space Agency,

Cira, Ferrari, Alenia,

Swedish Space Corporation,

Dasa, Laben, Officine Galileo,

Mars, Corista, Ansaldo,

Kayser Threde, Centrospazio,

Murst

PPAARRTTNNEERRSS

SME Space Alliance (SSA)

Italian Association of SME Space Companies (AIPAS)

Inernational Austronautical Federation (IAF)

Antares ConsortiumTechno System Developments Srl

Via Provinciale Pianura 35, Loc. San MartinoPozzuoli (Napoli) – Italy

Tel. 0039-081 52 63 475Fax 0039-081 52 62 701

E-mail tsdev@tin.itWebsite www.technosystemdev.com

Data Handling Unit of the Telescience Support Unit for the Russian Capsule Foton (flown on Foton 12 in September1999)

TECNOSPAZIO s.n.c. is a company operating in mechanics sector of high linear and volumetric precision. Placed in industrial area of S. Nicola of Melfi, adequately structurised, it has 2.800 sq. m covered on a total area of 11.000 sq. m.Our company is specializising in up to 5 axis products with up to diameter of 1.850 mm and tridimensional impellers in particular.

PRODUCTIVE CYCLE

PLANNING

Our technical office, equipped with CAD/CAM software of the Unigraphics ( version 16-18-NX ), provides to the realization of mathematical models and planning of multi-componential items.

TOOLS PRESETTING The tools presetting is completely automated thanks to the aid of a machinery Zoller model Saturn 2, and compared through software with the mathematical model elaborated in the center of planning

PRODUCTION

Our company uses a park of machineries of last generation. Workmanship center Dixi 400 5X working in a room with a checked temperature at 20° ± 0,3 . Workmanship center Jobs Jo’Mach 241. Workmanship center Mandelli Storm 1400. Turning mill Carnaghi TG.10/1850/CNC.

T e c n o s p a z i o di V. DI FRANCO & C. snc Industrial area of S. Nicola – 85025 Melfi (Pz) ITALY

Phone 0972.762046 Fax 0972.762088 E-mail info@tecnospazio.net

Website www.tecnospazio.net   

Designed by Mecaer spaManufactured by MT srl

M.T. Mechanical Technologies srl works with other two SMEs, Alfa Meccanica srl and Aermec Sud sas, which are some of the most representative among the supplying companies in the Italian Aerospace field. Our aim is joining the supplying of both mechanical, hydraulic, sheet metal groups and a maintenance service, in order to follow the demands of the big customers, with an effort in manufacturing and managing innovation, in order to organise in a vertical system the entire process in a very supplemented and efficient manner. This allows to cover the entire production cycle, to offer a reduced “time to market” and to be highly flexible in the different kind of manufacturing fields, in order to supply both aeronautical (small-medium lots) and space industry, (lots made of one or two parts), and to be competitive in tools, moulds and dies as well. So, the group of companies, which employees almost 60 people working on a 9000 sqm area, supplies a fully verticalized service, typical of a big company, applying the typical prices of a SME.

Com

pan

y P

rofi

leC

om

pan

y P

rofi

le

Main TechnologiesMain Technologies

MAGNAGHI Aerospace: Landing Gear and Oil-Pressure Groups (G222, C27J, MRCA, F104, A109, A129,MD80, A320, A300, A319, A321, AMX,ATR42, ATR72, MB339, CH47, P180, G91)ALENIA Spazio and Aeronautica: Structural Parts (Sicral-RadarSat) (MD11, MD80, ATR 42, ATR 72 767, 747, C27J, G222)MECAER: Landing Gear and Oil-Pressure Groups A109LUH (the entire landing gear)VULCAN AIR: Assembled Groups (P68)

CAD-CAM Design, High precision Machining, Galvanic Treatment, Thermal Treatment, Tig Welding, Shot Peening, Sheet manufacturing, CNC Dimensional Controls, Non Destructive Controls, Groups assembling and disassembling, Static and Dynamic tests, Painting.

Main ProgramsMain Programs

M.T. SrlM.T. Srl

M.T. srlVia Carceri Vecchie 65, 80046 San Giorgio a Cremano (Napoli) - Italy

Tel. 0039-081 27 04 90 Fax 0039-081 48 12 40E-mail vinbuono@unina.it

SOCIETA’ AEROSPAZIALE MEDITERRANEA S.c.r.l.

Tel. – Fax +39 (0)81 2507130

E.mail sam@samaerospazio.itWebsite www.samaerospazio.it