commercial sectional door operator · v ac; 0; th class iiico n fxe ei c y; t; - s t t) ard(s):...

4
OVER 100 YEARS OF AUSTRALIAN MANUFACTURING COMMERCIAL SECTIONAL DOOR OPERATOR

Upload: others

Post on 04-Feb-2021

0 views

Category:

Documents


0 download

TRANSCRIPT

  • OVER 100 YEARS OF AUSTRALIAN MANUFACTURING

    COMMERCIAL SECTIONAL DOOR OPERATOR

  • 2

    The Smooth OperatorQuiet, safe, reliable, powerful, adaptable.

    An industry leading warranty from your partner in commercial door automationThe serious warranty offered on the S-Drive covers the extreme working conditions of high-cycle applications such as busy carparks.

    The 2 year / 100,000 cycle warranty covers the entire operator, not just the “drive units” as warranted by other manufacturers.

    Certificate of SuitabilityS-Drive has been tested to comply with multiple relevant Australian Standards pertaining to commercial doors. The published CoS is available to all customers on request.

    Introducing S-Drive!With constant duty cycle, battery backup onboard and the industry’s best warranty, the new Grifco S-Drive is indeed the Smooth Operator.

    It is purpose built for high-cycle, highly demanding commercial sectional doors found in carparks, emergency services buildings and commercial tenancies.

    • The quiet, DC motor and purpose-designed gearbox deliver extremely smooth and fast door cycles, with soft start and soft stop.

    • The integral logic boards offer ultimate adaptability to meet the demanding needs of carpark applications.

    • The extremely durable rail and innovative sliding trolley have been engineered to meet the high-cycle demands of busy carpark doors.

    • The operator has been thoughtfully designed for low ceiling carpark applications, with a low profile, lockable enclosure.

    2 Year100,000

    CycleWarranty

    LASTING PERFORMANCE

    SAFE AND COMPLIANT

    RELIABLE OPERATION

    ROBUST AND DURABLE

    Soft start / stop for increased reliability and reduced maintenance. Purpose designed DC motor and gearbox for continual duty and quiet operation

    Meets all applicable regulatory standards. Utilise Grifco’s broad range of safety accessories to achieve a safe and compliant installation

    Integral battery backup can provide over 100 cycles* when the power fails

    * Dependant on door and battery condition and age.

    The steel enclosure and rail are built to withstand the demanding requirements of high cycle commercial applications

    Certificate No.: EESS-160151-0

    Page 1 of 1 Edition 2016-08

    www.jas-anz.org/register

    CERTIFICATE OF SUITABILITY Certificate Holder: Chamberlain Australia Pty Ltd

    15 Dell Road West Gosford NSW 2250 Australia

    Product Class: Out of Scope Electrical Equipment

    Product Type: S-Drive Commercial Sectional Door Opener

    Risk Classification: Not classified: Out Of Scope Electrical Equipment

    Trade Name: Grifco Model No: GSD-SDO Ratings: 230-240V AC; 400W; IPX0; Class I with Class III construction

    Fixed appliance intended for continuous operation; Operated while unattended; Indoor use only;

    Protective Electronic Circuit; non-detachable supply flexible cord with plug (type Y attachment)

    Standard(s): AS/NZS 60335.2.103:2011 with AS/NZS 60335.1:2011 + A1 + A2 (Clause 22.33)

    Conditions: For installation and use in accordance with the following:

    Rated load: 270N Operating temperature range: +5°C to +40°C

    Intended for Continuous Operation Maximum door weight: 315.5kg spring balanced door

    Maximum door area: 26m² Maximum door height: 6.0m

    Required marking: The Regulatory Compliance Mark (RCM) in accordance with its conditions of use as

    set out in the latest edition of AS/NZS 4417.1.

    Date of Issue: 15 November 2016 Valid until: 14 November 2021

    Conformity Certification Services Pty Ltd as accredited by JAS-ANZ under ISO/IEC 17065 certifies that the

    Electrical Equipment as described on this certificate complies with the minimum essential safety requirements

    for which the application has been made. Certification is based on type testing.

    Elaine Clayton General Manager For and on behalf of Conformity Certification Services Pty Ltd

    trading as EESS Conformity Certification

    40-50564A

    Moving Gate/Door Can Cause Serious Injury or Death

    Keep Gate in sight at all times when gate is moving

    Typical Installation & SpecificationsSpring balanced commercial sectional door, common in multi-tennanted carpark and commercial applications.

    Main AC Power Supply 230-240 VAC 50Hz, 400W

    Rated Load (R/T) 270N (Continuous)

    System Operating Voltage 24 VDC Transformer Run / Battery Backup

    Accessory Power 24 VDC, 500 mA max. for ON and SW (switched)

    Max Door Heights (Part No.) 2.4m (GSD-R2.4M) / 3.6m (GSD-R3.6M) / 6.0m (GSD-RKIT)*

    Maximum Door Weight 315.5 kg balanced door

    Maximum Door Area 26m²

    Travel Speed 20cm per second

    Maximum Duty Cycle Continuous (100%)

    Operating Temperature +5°C to +40°C

    Logic Complete, expanded logic for configuration and integration

    Compliance AS/NZS 60335-1 / AS/NZS 60335-2-103 / AS/NZS 4417.1

    * GSD-RKIT requires fabrication of rail and assembly

  • 3

    Battery Backup OnboardThe two 7Ah integral batteries have been known to provide over 100 cycles*, ensuring access in and out of the facility in the event of a power outage.

    Batteries are conveniently mounted within the operator and are supplied as standard.

    * Actual results will vary. Performance under battery backup is determined by age and conditioin of door, operator and batteries.

    Exceptionally powerful, quiet and durableWith 100% duty cycle, the S-Drive constantly performs in the busiest of carparks. The DC motor and commercial gear-driven transmission combine to deliver unsurpassed reliability and smooth, quiet operation.

    The door starts and finishes its travel slowly before speed ramps up. This is essential for minimising noise and vibration in apartments directly above or adjacent to the carpark.

    Innovative Trolley and SlidersThe slider provides reliably smooth operation with every cycle. The hard-wearing and replaceable acetyl inlays capture the slider on the rail and effortlessly glide with very little friction or noise.

    With no wheels or other moving parts, the slider is not prone to derailment, seizing or obtrusive noise.

    Low Profile, Lockable EnclosureThe S-Drive operator is only 200mm high, making it ideal for carparks with low ceilings. The lateral mounting plates are permanently fixed to the operator and allow for easy surface mounting or suspension via strapping. The enclosure can be padlocked to prevent unauthorised access.

    200mm

  • AU: 1800 GRIFCO | www.grifco.com.auNZ: 0800 653 667 | www.grifco.co.nzChamberlain Australia Pty LtdHead Office - Unit 1, 75 Epping Rd North Ryde NSW 2113Manufacturing - 15 Dell Rd, West Gosford NSW 2250

    Chamberlain BranchesSydney - Unit 1, 75 Epping Rd North Ryde NSW 2113Melbourne - Unit 15, 85-91 Keilor Park Dr Tullamarine VIC 3043Brisbane – Unit 19, 140 Wecker Rd Mansfield QLD 4122Perth – 54 Millrose Dr Malaga WA 6090

    Chamberlain New Zealand Ltd17A Arrenway Dr, Rosedale 0632 Auckland NZ S-

    DR

    IVE

    SS

    02-

    17S

    -DR

    IVE

    SS

    02-

    17

    S-DRIVE INDIVIDUAL COMPONENTS

    Part Number Includes

    GSD-SDO S-Drive Operator with BBU

    GSD-R2.4M Rail for door max 2.4m high

    GSD-R3.6M Rail for door max 3.6m high

    GSD-RKIT* Rail kit for door max 6.0m high

    S-DRIVE COMPLETE KITS

    Part Number Includes

    GSDK-R2.4M-GPS15RK S-Drive Operator, Rail for door max 2.4m high, GPS15 Reflective Safety Beam, 2 x E960G 4-Channel Transmitters

    GSDK-R3.6M-GPS15RK S-Drive Operator, Rail for door max 3.6m high, GPS15 Reflective Safety Beam, 2 x E960G 4-Channel Transmitters

    GSDK-RKIT-GPS15RK* S-Drive Operator, Rail kit for door max 6.0m high, GPS15 Reflective Safety Beam, 2 x E960G 4-Channel Transmitters

    GSDK-R2.4M-774RK S-Drive Operator, Rail for door max 2.4m high, 774ANZ Send / Receive Safety Beam, 2 x E945G 3-Channel Transmitters

    GSDK-R3.6M-774RK S-Drive Operator, Rail for door max 3.6m high, 774ANZ Send / Receive Safety Beam, 2 x E945G 3-Channel Transmitters

    GSDK-RKIT-774RK* S-Drive Operator, Rail kit for door max 6.0m high, 774ANZ Send / Receive Safety Beam, 2 x E945G 3-Channel Transmitters* GSD-RKIT requires steel fabrication of rail length

    ORDER CODES

    ACCESSORIESWired Controls and Peripherals Remote Access Devices

    Light Curtain

    Part No. GLCPS

    Reflective Monitored Safety Beam

    Part No. GPS15

    Monitored Safety Edge

    Part No. BMSE30K (3m)

    Send / Receive Monitored Safety Beam

    Part No. GPS7723-Channel Keyring Transmitter

    Part No. E945G

    2-Channel Wireless Wall Transmitter

    Part No. E138G

    Up/Stop/Down Wall Control

    Part No. PU103L

    Emergency Stop Button

    Part No. PU100

    2-Aspect LED Traffic Light IP55

    Part No. TL24

    Flashing Strobe Lights

    Part No. FLR24

    Strobe Lights and Sounders

    Part No. BS2224

    Loop Detector System

    Part No. LD000

    3-Channel Visor Transmitter

    Part No. E943G

    Recessed 3-pos. Return Key Switch

    Part No. KS106

    4-Channel Keyring Transmitter

    Part No. E960G

    Bulk Pack Coming Soon!

    Wall-mounted 3-pos. Return Key Switch

    Part No. KS103

    Transmitter Management (1,000 devices)

    Part No. GSD-STAR1000EVO

    Wireless Security Keypad

    Part No. E840G

    Entrapment Protection Systems