Project

To design, manufacture,

install & commission a com-

bined extract & pressure

relief unit for a gas protect-

ed area.

System Components

PVDX 300 combined pres-

sure vent and fan with asso-

ciated 315 spiral duct &

weather louvre.

Design Considerations

The major design issue in

on this project was the lim-

ited amount of space for

the unit along with having

to install the unit through a

glazed window

Contact E sales@airpressuresolutions.co.uk W www.airpressuresolutions.co.uk T 01732 652025

We were asked to design, supply, install and

commission a combined prv & extract system

for a gas protected room within a high profile

charitable organisation in Central London.

As a global leader in pressure venting we have over 30 years experience in developing pressure venting & associated

products to many different markets globally. Our product line up consists of the following Pressure, Blast & Air Sta-

bilisation Vents, Fire Dampers, Window Actuators, Leak Detection, Facility Monitoring Equipment, Ventilation Prod-

ucts and Smoke Control Systems. If you want a further look at our products please look at our website or please call.

At AP Solutions are able to offer products manufactured by many of the industries key players but are not tied to

these so we are able to offer solutions to suit our clients requirements.

We are also able to offer the required service and maintenance on these types of systems to BS7346 part 8.

The main issues were the limited amount of space to

install the unit due to the design of the room and the

architecture within the area. The system was designed

to extract through an existing window so a covering

plate had to made up to replace the glass.

The installation was carried out by our own highly skilled and

qualified engineers on a very tight programme to meet our

clients requirements. clients day to day activities.