User Manual

Edition Notes

COLORdash™ Accent User Manual Rev. 6

Edition Notes

The COLORdash™ Accent User Manual Rev. 6 covers the description, safety precautions, installation, programming, operation, and maintenance of the COLORdash™ Accent. Chauvet released this edition of the COLORdash™ Accent User Manual in April 2015.

Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted triangle, and all other trademarks in this manual pertaining to services, products, or marketing statements are owned or licensed by Chauvet. Any other product names, logos, brands, company names, and other trademarks featured or referred to within this document are the property of their respective trademark holders.

Copyright Notice Chauvet owns the content of this User Manual in its entirety, including but not limited to pictures, logos, trademarks, and resources. © Copyright 2015 Chauvet. All rights reserved. Electronically published by Chauvet in the United States of America.

Manual Use Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.

Intended Audience

Any person in charge of installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.

Disclaimer Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility for any errors or omissions in this document. Chauvet reserves the right to revise and make changes to the content of this document without obligation that Chauvet notify any person or company of such revision or changes. This does not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue a revision of this manual or a new edition to incorporate such changes.

Document Revision

The COLORdash™ Accent User Manual Rev. 6 supersedes all previous versions of this manual. Discard any older versions of this manual and replace with this version. Go to www.chauvetprofessional.com for the latest version.

Author Date Editor Date D. Couppe 4/2/15 M. Trouard 4/21/15

Table of Contents

COLORdash™ Accent User Manual Rev. 6 -i-

Table of Contents 1. Before You Begin ...................................................................................................................................... 1

What Is Included ........................................................................................................................................................... 1 Claims .......................................................................................................................................................................................... 1 Manual Conventions .................................................................................................................................................................... 1 Symbols ....................................................................................................................................................................................... 1

Product At A Glance ..................................................................................................................................................... 2 Safety Notes ................................................................................................................................................................. 2

Personal Safety ............................................................................................................................................................................ 2 Mounting And Rigging .................................................................................................................................................................. 2 Power And Wiring ........................................................................................................................................................................ 2 Operation ..................................................................................................................................................................................... 2

Expected LED Lifespan ................................................................................................................................................ 2

2. Introduction ............................................................................................................................................... 3

Description .................................................................................................................................................................... 3 Features ........................................................................................................................................................................ 3 Overview ....................................................................................................................................................................... 4 Dimensions ................................................................................................................................................................... 5

3. Setup .......................................................................................................................................................... 6

AC Power ...................................................................................................................................................................... 6 AC Plug ........................................................................................................................................................................................ 6

DMX Linking.................................................................................................................................................................. 6 DMX Personalities ........................................................................................................................................................................ 6 Master/Slave Connectivity ............................................................................................................................................................ 6

Mounting ....................................................................................................................................................................... 7 Orientation ................................................................................................................................................................................... 7 Rigging ......................................................................................................................................................................................... 7 Procedure .................................................................................................................................................................................... 7

4. Operation ................................................................................................................................................... 8

Control Panel Description ............................................................................................................................................. 8 Control Options ............................................................................................................................................................. 8

Dip Switch Assignments ............................................................................................................................................................... 8 Operation Modes .......................................................................................................................................................... 9 Programming ................................................................................................................................................................ 9

Starting Address ........................................................................................................................................................................... 9 Procedure .................................................................................................................................................................................... 9

STATIC Mode ............................................................................................................................................................. 10 STATIC Mode Configuration ...................................................................................................................................................... 10 Procedure .................................................................................................................................................................................. 10

AUTO Mode ................................................................................................................................................................ 10 Procedure .................................................................................................................................................................................. 10 Master/Slave .............................................................................................................................................................................. 10

DMX Values ................................................................................................................................................................ 11

5. Technical Information ............................................................................................................................. 13

Product Maintenance .................................................................................................................................................. 13

6. Technical Specifications ......................................................................................................................... 14

Returns ....................................................................................................................................................................... 15

Contact Us ................................................................................................................................................... 16

Before You Begin

COLORdash™ Accent User Manual Rev. 6 -1-

1. BEFORE YOU BEGIN What Is

Included · COLORdash™ Accent · Warranty Card · Quick Reference Guide

Claims Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition. If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Manual Conventions

Convention Meaning 1–512 A range of values in the text 50/60 A set of mutually exclusive values in the text [10] A DIP switch to be configured

<SET> A button on the product’s control panel Settings A product function or a menu option

MENU>Settings A sequence of menu options 1–10 A range of menu values from which to choose in a menu

Yes/No A set of two mutually exclusive menu options in a menu ON A unique value to be entered or selected in a menu

Symbols Symbols Meaning

Critical installation, configuration, or operation information. Failure to comply with this information may cause the product not to work, damage third-party equipment, or cause harm to the operator.

Important installation or configuration information. Failure to comply with this information may keep the product from working.

Useful information.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.

Before You Begin

-2- COLORdash™ Accent User Manual Rev. 6

Product At A Glance

Use on Dimmer x Auto Programs P Outdoor Use x Auto-Ranging Power

Supply P

Master/Slave P Replaceable Fuse/Breaker x

DMX P User-Serviceable x

Safety Notes Read all the following Safety Notes before working with this product. These notes include important information about the installation, usage, and maintenance of this product.

This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained Chauvet certified technicians. Do not open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

Personal Safety · Avoid direct eye exposure to the light source while the product is on. · Always disconnect this product from its power source before servicing. · Always connect this product to a grounded circuit to avoid the risk of electrocution. · Do not touch this product’s housing during operation because it may be very hot.

Mounting And Rigging

· The product is not intended for permanent installation. · This product is for indoor use only! To prevent risk of fire or shock, do not expose this

product to rain or moisture. (IP20) · CAUTION: When transferring product from extreme temperature environments, (e.g. cold

truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.

· Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

· Make sure there are no flammable materials close to this product while it is operating. · When hanging this product, always secure to a fastening device using a safety cable.

Power And Wiring

· Always make sure you are connecting this product to the proper voltage in accordance with the specifications in this manual or on the product’s specification label.

· To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

· Never connect this product to a dimmer pack or rheostat. · Never disconnect this product by pulling or tugging on the power cable.

Operation · Do not operate this product if you see damage on the housing, lenses, or cables. Have the damaged parts replaced by an authorized technician at once.

· Do not cover the ventilation slots when operating to avoid internal overheating. · The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a

higher temperature. · In case of a serious operating problem, stop using this product immediately!

In the unlikely event that your Chauvet product may require service, contact Chauvet Technical Support.

Expected LED Lifespan

LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED conditions. For this reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by improving the ventilation around the product and reducing the ambient temperature to an optimal operating range. In addition, limiting the overall projection intensity may also help to extend the LEDs’ lifespan.

Introduction

COLORdash™ Accent User Manual Rev. 6 -3-

2. INTRODUCTION Description The COLORdash™ Accent is a small LED-based, DMX controllable, wash light designed for

indoor applications. The COLORdash™ Accent is a high-power, high luminance LED wash product. This product consists of a small aluminum casing that houses the internal power supply, the main control, the control panel, the LED drivers, the LED boards, as well as the power and signal connectors. The COLORdash™ Accent includes one double-bracketed yoke that can be both a floor mount and hanging support.

Features · 3-, 4-, or 9-channel RGBW LED wash product · Operating modes:

· 3-channel: RGB control · 4-channel: RGBW · 9-channel: RGBW, dimmer, strobe, macro, auto, auto speed

· RGBW color mixing with or without DMX controller · Direct DMX input and output · Automatic programs with or without DMX controller · Static control with or without DMX controller · 0–100% dimmer · Macros · Master/Slave operation · Lightweight, black aluminum casing · Natural convection cooling (no fans) · High power (1 W, 350 mA) LEDs · Double-bracketed yoke that doubles as a floor stand

Introduction

-4- COLORdash™ Accent User Manual Rev. 6

Overview

Front View

Rear View Side View

3- Pin DMX

In/Out Power In

Top View

LED (7)

Bracket Adjustment Knob

Control Panel

Double-Bracketed Yoke

Introduction

COLORdash™ Accent User Manual Rev. 6 -5-

Dimensions

4.3 in 108 mm

2.5 in 65 mm

6.9 in 174 mm

Setup

-6- COLORdash™ Accent User Manual Rev. 6

3. SETUP AC Power Each COLORdash™ Accent has an auto-ranging power supply that works with an input voltage

range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each COLORdash™ Accent, refer to the label affixed to the product. You can also refer to the Technical Specifications chart in this manual. The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.

· Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.

· To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

AC Plug The COLORdash™ Accent comes with a hard-wired power input cord terminated with an Edison plug. The product side of this power cord enters the product through a strain reliever (rubber boot) and it cannot be disconnected from the product. If the power input cord that came with your product has no plug, or if you need to change the Edison plug, use the table below to wire the new plug.

Connection Wire (U.S.) Wire (Europe) Screw Color AC Live Black Brown Yellow or Brass

AC Neutral White Blue Silver AC Ground Green/Yellow Green/Yellow Green

DMX Linking You can link the COLORdash™ Accent to a DMX controller using a 3-pin DMX connection. If using other DMX-compatible products with the COLORdash™ Accent, you can control each individually with a single DMX controller.

DMX Personalities

The COLORdash™ Accent uses a 3-pin DMX data connection for the STAGE1, ARC.1, and ARC.2 DMX personalities. · Refer to the Introduction chapter for a brief description of each DMX personality. · Refer to the Operation chapter to learn how to configure the COLORdash™ Accent to work

in these personalities. · The DMX Values section provides you with detailed information regarding the DMX

personalities.

If you are not familiar with or need more information about DMX standards, Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.

Master/Slave Connectivity

The Master/Slave mode allows a COLORdash™ Accent (the master) to control one or more COLORdash™ Accents (the slaves) without a DMX controller. One COLORdash™ Accent becomes the master when running an auto program, or by being in a Static mode. You must configure each slave’s control panel to operate in Slave mode. During Master/Slave operation, the slaves will operate in unison with the master.

DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX controller signals may interfere with the signals from the master.

The Operation section of this manual provides detailed instructions on how to configure the master and slaves.

Setup

COLORdash™ Accent User Manual Rev. 6 -7-

Mounting Before mounting this product, read and follow the Safety Notes. For our Chauvet line of mounting clamps, go to http://trusst.com/products/.

Orientation

Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance.

Rigging Chauvet recommends using the following general guidelines when mounting this product. · When selecting an installation location, consider easy access to this product for operation,

programming adjustments, and routine maintenance. · The product is not intended for permanent installation. · Make sure to mount this product away from any flammable material as indicated in the

Safety Notes. · Never mount in places where rain, high humidity, extreme temperature changes, or

restricted ventilation may affect the product. · If hanging this product, make sure that the mounting location can support the product’s

weight. See the Technical Specifications for the weight-bearing requirements of this product.

· When hanging this product, always secure to a fastening device using a safety cable. For our Chauvet line of safety cables, go to http://trusst.com/products/.

Procedure The COLORdash™ Accent comes with a double-bracketed yoke to which you can either attach mounting clamps for hanging or simply use as a floor stand. You must supply your own mounting clamps. Make sure the clamps are capable of supporting the weight of this product. Use at least one mounting point per product. For our Chauvet line of mounting clamps, go to http://trusst.com/products/.

Mounting Diagram

Floor Mounting Overhead Mounting

Clamp

Safety Cable

Operation

-8- COLORdash™ Accent User Manual Rev. 6

4. OPERATION Control Panel

Description The COLORdash™ Accent has a basic control panel, which consists of a single 12-switch dual in-line package (DIP) switch module. Each of the individual switches has a number (DIP switch [1] through [12]). The only function of DIP switches [10] through [12] is to set the product’s operation mode. The function of DIP switches [1] to [9] will vary depending on which operation mode you have selected. The diagram below shows the DIP Switch Assignments. The Operation Modes table shows the DIP switch setting to enable the various operating modes for the COLORdash™ Accent.

Control Options

You can set the COLORdash™ Accent starting address in the 001–512 DMX range. This enables control of up to 56 products in the 9-channel STAGE1 personality.

Dip Switch Assignments

· When the product is in DMX mode, DIP switches [1] to [9] define the product’s starting address.

· When the product is in AUTO mode, DIP switches [1] to [5] determine which program will run.

· When the product is in STATIC mode, DIP switches [1] to [8] determine the intensity of the LEDs by color.

DIP Switches [1] to [9] DMX Address Selection

(When DMX Mode is active)

DIP Switches [1] to [8] Color Intensity

(When STATIC Mode is active)

DIP Switches [1] to [5] AUTO Programs Selection

(When AUTO Mode is active)

DIP Switches [10] to [12] Operation Mode

Selection (See table below)

On Position

Off Position

Operation

COLORdash™ Accent User Manual Rev. 6 -9-

Operation Modes

DIP 10 DIP 11 DIP 12 Function On Off On STATIC (Master)

Off Off On AUTO (Master)

On Off Off Slave

Off On Off ARC.1

On On Off ARC.2

Off Off Off STAGE1

Programming It is possible to change the product’s various operation modes, DMX address, Auto, or Static mode settings while the product is on. Always make sure that you have clear access to the DIP switches on the back of the product for easier product changes.

Starting Address When any of the DMX modes is active as per the Operation Modes Table, you may select the product’s starting DMX address (001–512) by setting DIP switches [1] through [9] as per the table below.

DIP Switch 1 2 3 4 5 6 7 8 9

Value 1 2 4 8 16 32 64 128 256

Procedure 1. Set DIP switches [10] through [12] to select a DMX operation mode, as per the Operation Modes Table.

2. Select the desired starting address (001–512) by setting DIP switches [1] through [9] to ON or OFF until the sum of the value of the DIP switches in the ON position matches the desired address number.

3. Refer to the examples below for more information. Starting Address

Examples These three examples are for STAGE1 DMX mode. Therefore, in all three cases, DIP switches [10], [11], and [12] are set to OFF.

a. To select DMX Address 1, set DIP switch [1] to ON.

b. To select DMX Address 64, set DIP switch [7] to ON.

c. To select DMX Address 31, set DIP switches [1], [2], [3], [4], and [5] to ON ( 1+ 2 + 4 + 8 + 16 = 31).

If you are not familiar with or need more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.

Operation

-10- COLORdash™ Accent User Manual Rev. 6

STATIC Mode When selecting the Static mode, the COLORdash™ Accent can be set up to various colors and intensities without a DMX controller by using DIP switches [1] through [8] as per the tables below.

STATIC Mode Configuration

Red Green Blue White

DIP Switch [1] [2] [3] [4] [5] [6] [7] [8] 0 % Off Off Off Off Off Off Off Off 30 % On Off On Off On Off On Off 60 % Off On Off On Off On Off On 100 % On On On On On On On On

Procedure 1. Set DIP switches [10] and [12] to ON, and DIP switch [11] to OFF to select Static Mode. 2. Select the color intensity as indicated in the STATIC Mode Configuration table above.

AUTO Mode Auto Mode allows the user to select one of the 32 preset programs (0–31) on each individual COLORdash™ Accent.

Dip Switch [1] [2] [3] [4] [5] Value 1 2 4 8 16

Procedure 1. Set DIP switches [10] and [11] to OFF, and DIP switch [12] to ON (Auto Mode). 2. Select the desired program (0–31) by setting DIP switches [1] through [5] to ON or OFF

until the sum of the value of the DIP switches in the ON position matches the desired program number.

3. Refer to the examples below for more information. Auto Mode Examples

a. To select Auto program 0, set DIP switches [1] through [5] to OFF and DIP switch [12] to ON.

b. To select Auto program 9, set DIP switches [1], [4], and [12] to ON.

Master/Slave The Master/Slave mode allows a group of COLORdash™ Accents (the slave products) to simultaneously duplicate the output of another COLORdash™ Accent (the master product) without a DMX controller.

a. Connect all COLORdash™ Accents in a daisy chain. b. Set up the first product in the daisy chain (Master) as explained in STATIC Mode or

AUTO Mode. c. On the rest of the COLORdash™ Accents, set DIP switch [10] to ON.

· The master product is the one that runs a program whether in Auto or Static mode. · Do not connect a DMX controller to the products configured for Master/Slave

operation. The DMX controller may interfere with signals from the master product. · The master product should be the first product in the daisy chain.

Operation

COLORdash™ Accent User Manual Rev. 6 -11-

DMX Values STAGE1 Channel Function Value Percent/Setting

1 Dimmer 000ó255 0–100% 2 Red 000ó255 0–100% 3 Green 000ó255 0–100% 4 Blue 000ó255 0–100% 5 White 000ó255 0–100%

6 Color Macro + White Balance

000ó010 011ó035 036ó060 061ó085 086ó110 111ó135 136ó160 161ó185 186ó210 211ó215 216ó220 221ó225 226ó230 231ó235 236ó240 241ó245 246ó250 251ó255

No function R: 100% G: 0-100% B: 0 R: 100%-0 G: 100% B: 0 R: 0 G: 100% B: 0-100% R: 0 G: 100%-0 B: 100% R: 0-100% G: 0 B: 100% R: 100% G: 0 B: 100%-0 R: 100% G: 0-100% B: 0-100% R: 100%-0 G: 100%-0 B: 100% White 1 White 2 White 3 White 4 White 5 White 6 White 7 White 8 White 9

7 Strobe 000ó009 010ó255

No Function 0–20 Hz

Operation

-12- COLORdash™ Accent User Manual Rev. 6

DMX Values (Cont.) STAGE1

(Cont.) Channel Function Value Percent/Setting

8 Programs

000ó020 021ó030 031ó040 041ó050 051ó060 061ó070 071ó080 081ó090 091ó100 101ó110 111ó120 121ó130 131ó140 141ó150 151ó160 161ó170 171ó180 181ó190 191ó200 201ó210 211ó220 221ó223 224ó226 227ó229 230ó232 233ó235 236ó238 239ó241 242ó244 245ó247 248ó250 251ó253 254ó255

No Function Auto 0 Auto 1 Auto 2 Auto 3 Auto 4 Auto 5 Auto 6 Auto 7 Auto 8 Auto 9 Auto 10 Auto 11 Auto 12 Auto 13 Auto 14 Auto 15 Auto 16 Auto 17 Auto 18 Auto 19 Auto 20 (Red) Auto 21 (Red & Green) Auto 22 (Red & Blue) Auto 23 (Red & White) Auto 24 (Green) Auto 25 (Green & Blue) Auto 26 (Green & White) Auto 27 (Blue) Auto 28 (Blue & White) Auto 29 (White) Auto 30 (Red & Green & Blue) Auto 31 (Red & Green & Blue & White)

9 Auto Speed 000ó255 Only when Auto 0–19 in Ch. 8 is activated

ARC.1 Channel Function Value Percent/Setting 1 Red 000ó255 0–100% 2 Green 000ó255 0–100% 3 Blue 000ó255 0–100%

ARC.2 Channel Function Value Percent/Setting 1 Red 000ó255 0–100% 2 Green 000ó255 0–100% 3 Blue 000ó255 0–100% 4 White 000ó255 0–100%

Technical Specifications

COLORdash™ Accent User Manual Rev. 6 -13-

5. TECHNICAL INFORMATION Product

Maintenance To maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear. To clean your product: 1. Unplug the product from power. 2. Wait until the product is at room temperature. 3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the

external vents. 4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl

alcohol. 5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue. 6. Wipe any dirt or grime to the outside edges of the lens surface. 7. Gently polish the lens surfaces until they are free of haze and lint.

Always dry the external surfaces thoroughly and carefully after cleaning them.

Technical Information

-14- COLORdash™ Accent User Manual Rev. 6

6. TECHNICAL SPECIFICATIONS Dimensions and

Weight Length Width Height Weight

6.9 in (174 mm) 4.3 in (108 mm) 2.5 in (65 mm) 1.5 lb (0.6 kg) Note: Dimensions in inches rounded to the nearest decimal digit.

Power Power Supply Type Range Voltage Selection Switching (internal) 100–240 VAC, 50/60 Hz Auto-ranging

Parameter 120 VAC, 60 Hz 230 VAC, 50 Hz Consumption 10 W 10 W

Current 0.1 A 0.1 A Power I/O U.S./Canada Worldwide

Power input connector Hard-wired Hard-wired Power cord plug Edison (U.S.) Local plug

Light Source Type Power Lifespan LED 1 W 50,000 hours

Color Quantity Current Red 2 350 mA

Green 2 350 mA Blue 2 350 mA White 1 350 mA

Photometrics Parameter Standard 18º Optics Illuminance @ 5 m 153 lux

Beam angle 20° Field angle 37.5°

Thermal Max. External Temperature Cooling System 113 °F (45 °C) Convection

DMX I/O Connectors Connector Type Channel Range 3-pin XLR Sockets 3, 4 or 9

Ordering Product Name Item Code UPC Number COLORdash™ Accent 01030111 781462203825

-15-

Returns You must send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will not issue call tags. Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA number.

DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.

Once you have received the RMA number, include the following information on a piece of paper inside the box: · Your name · Your address · Your phone number · The RMA number · A brief description of the problem(s) Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. FedEx packing or double-boxing is recommended.

Chauvet reserves the right to use its own discretion to repair or replace returned product(s).

Technical Specifications

-16- COLORdash™ Accent User Manual Rev. 6

CONTACT US

WORLD HEADQUARTERS - Chauvet General Information Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084

Technical Support Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com World Wide Web www.chauvetlighting.com

UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd. General Information Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115 Fax: +44 (0)1773 511110

Technical Support Email: uktech@chauvetlighting.com World Wide Web www.chauvetlighting.co.uk

MEXICO - Chauvet Mexico General Information Address: Av. Santa Ana 30 Parque Industrial Lerma Lerma, Mexico C.P. 52000 Voice: +52 (728) 285-5000

Technical Support Email: servicio@chauvet.com.mx World Wide Web www.chauvet.com.mx

CHAUVET EUROPE - Chauvet Europe BVBA General Information Address: Stokstraat 18 9770 Kruishoutem Belgium Voice: +32 9 388 93 97

Technical Support Email: Eutech@chauvetlighting.eu World Wide Web www.chauvetlighting.eu

Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record. Follow their instructions to request support or to return a product. Visit our website for contact details.